Audacity doesn't have a menu bar anymore!It doesn't even have that narrow space where a menu bar would be!My problem doesn't have anything to do with Gnome's menubars as far as I can tell, but I even tried removing and reinstalling Audacity.
View 9 RepliesI am trying to record in Audacity in Ubuntu 8.10 64 bit on a Dell Studio 1535 laptop.The problem is not that its not recording, per se.Rather, the problem is its not recording the way that I want it to.
Its recording from the built-in mic, and I want to use the mic jack instead as a line in from a guitar (well, technically, an acoustic-electric resonator, but its close enough to a guitar to call it a guitar).
I have tried using various devices for recording, and changing settings in both the Volume Control and Sound Preferences, but no matter what I do, Audacity still records from my built-in microphones, instead of from the line-in.
This works for me in Windows but not my Linux box. Does it work on ur linux box?
View 4 Replies View RelatedI need to remove items from Main Menubar --> Places --> Removable Media and from Computer shortcut.
View 4 Replies View Relatedi can't record with my mic anymore. I went to do so in audacity and i only get the noise it hears through the headphones. I am recording a second vocal track. The first track is the music. I looked at the alsamixer and the mic was originally muted and i unmuted. Should line be muted when i am using the mic? I also tried to record with the mic in sound recorder but got nothing there either.
View 9 Replies View RelatedI've been trying to learn how to record my guitar parts onto Audacity using my Pod XT.I've always used Audacity to do my audio recordings since its much more user friendly than Ardour and just as capable IMO.However, I cannot get Audacity to work with the Pod.I downloaded the "line6-usb-source" using apt-get.Ubuntu seems to recognize the Pod and get a signal just fine (when I go to "Sound Preferences" it allows me to select the Pod XT as input hardware and even shows an incoming signal).When I go to Audacity's preferences,it allows me to select the Pod as the "Recording Device", however when I go to record it gives me an error saying to check the Project Sample Rate.
Does the Pod not output at 44100 Hz?Is there a way to change the sample rate the Pod puts out?Is there another setting in Audacity I need to adjust?I do not want to wine or emulate anything.I feel I shouldn't have to use a specific audio recording software to use a piece of a hardware I paid good money for.
Trying to edit some mp3's and join them together using Audacity 1.3.9 but when I try to export I get this "edit metadata" window??? I have all the libraries I believe (Lame, ffmpeg, etc.) with the right versions (I think). Running Ubuntu 9.10.
View 3 Replies View RelatedI installed Audacity to convert an mp4 to an mp3. Now, I don't necessarily need Audacity to do this, but for the time being I'm more concerned with getting Audacity to work properly as opposed to getting an mp3 onto my iPod.
In Audacity, I went to Edit>Preferences>Libraries. For the MP3 Export Library, Audacity recognizes LAME, but under the FFmpeg Import/Export Library it says "FFmpeg library not found." I hit the Download button and read this page on how to install FFmpeg, noticing the warning about needing FFmpeg 0.5 or later on Linux.
I fired up Synaptic and searched for "ffmpeg," chose the vanilla version and installed it along with two dependencies which I don't exactly remember but I bet they were libavformat52 and libavdevice52.
Back in the Audacity Preferences window I chose the "Locate..." button to point to the newly installed libraries, but Audacity is not recognizing/installing them successfully. I've tried pointing to the following files:
/usr/lib/libavformat.so.52
/usr/lib/libavformat.so.52.36.0
/usr/lib/i686/cmov/libavformat.so.52
/usr/lib/i686/cmov/libavformat.so.52.36.0
/usr/share/lintian/overrides/libavformat52
[Code]....
Did I install the wrong version of FFmpeg or libavformat? Any pointers?
So I asked around and to combine audio files apparently I want to use Audacity.
It seems easy enough to LAYER audio files, but how do you string them together in sequence? I have an audiobook divided into 5 minute chapters and I want to combine them into longer chapters....my MP3 player likes to play them out of order which makes them difficult to listen to. I want to make it 1 long tract, or maybe 6 medium length tracks.
How do I combine tracks with Audacity...Not layering them but putting them in order into 1 long track?
Audacity doesn't play any sounds, although it can record from my microphone. And kubuntu plays the startup sounds (BTW, how to turn them off?).
Code:
arho@a91-156-166-231:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]....
I'm running Ubuntu 10.04, using Audacity 1.3.12 beta... and trying to get it to work with a USB Mic.
In Audacity ALSA I/O preferences, I can select the USB mic. But when I record, the input meter stays at about half-way and does not fluctuate when I speak into the microphone... I can hear myself very faintly on the playback... but it is very quiet and there is a loud buzzing. There are no mechanical reasons for this buzzing, such as computer fan, etc...
Also, I cannot find the USB mic in Ubuntu Sound Prefereces...
This is from "Device Info" in audacity:
Has anyone got any experience with running audacity on a netbook (+/- 1,2 GHZ processor, 1 GB memory). Did it go smoothly or was multi-track editing not really working as you would wish in terms of speed and smoothness?
View 4 Replies View RelatedI installed Audacity from Software center and launched it but it didn't have menu like this.
I tried to lauch it in Terminal and here is output in Terminal:
Code:
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
Expression 'stream->capture.pcm' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 3653
no more csLADSPA plugins
When i want to record sound it record but the voice is very low.which means i need to turn up for full wolume on both headset and pc when i want to hear it, and it still is very low sound..I've tried.Re-installing audacity changing microphone plug microphones directly to pc instead of through headset.both the 'pink' and blue jacktick port (also with above options)
View 2 Replies View RelatedI was using a line device to record compact cassettes to digital (Linear PCM) then I transferred these files to the computer.Due to cassette print-through, there is audible, albeit weak, pre-echo. This is not caused by the recorder since I can hear them playing the cassettes on a deck.So. Does Audacity have a pre-echo removal function, or can a similar result be obtained by applying different effects? Or any 3rd-party plug-ins?
View 1 Replies View RelatedSceanrio: Childs homework requires the use of Audacity. Of course all other students working on the project with him have Windows. So I need mp3 supported with Audacity.Error message box, "you have compiled Audacity without mp3 support"Downloaded from: YAST with an additional plug-ins (I think).What I need: How do I add mp3 support, or compile it for Audacity?Does anyone have experience with this program? And have mp3 importing and playing within it also?
View 8 Replies View Relatedhow do i get audacity to record what the computer is playing? for instance, if i have a videos video open in firefox and i want to record the audio, what would i have to do? i've played around with the audio setting in ubuntu and audacity 1.3.9 but i couldn't get it to work.
View 2 Replies View RelatedIs there a way to make the db waveform the default in audacity.
View 1 Replies View RelatedI just installed Audacity and as soon as it's done installing all sounds (speakers and headphones) go off. As soon as I delete Audacity and reboot everything works fine again.
View 3 Replies View RelatedConfigure: error: Unable to locate a suitable configuration of wxWidgets v2.4.x. The currently available configurations are listed below. If necessary, either install the package for your distribution or download the 2.4.x version of wxWidgets from [URL]. To help configure find the right version set WX_CONFIG to point to it. wxWidgets 2.5.x and 2.6.x are NOT supported! But I thought I installed widgets 2.4?
View 2 Replies View RelatedHow to select input source in Audacity?
View 1 Replies View RelatedI am trying to get Audacity to record from a line in. Seems like it should be a fairly easy setup. I discovered that Audacity needs PulseAudio. So I installed that, and don't know how to configure it. I set the sound preferences >> Input to line in. I am using a desktop that has a line-in on the front and back, so I'm not sure which it will pick up, so I have been testing both.
View 1 Replies View RelatedIm on XP and am trying to get a 9 min piece of music from a cassette on my music centre into audacity on my comp got the line from earphone socket into the blue socket at back of comp (there are 3 sockets in a line then 3 more below them in a line go the line in socket... blue top left. )
Im getting sound ok on the comp with radio, its playing vids etc well so I cant think anything is wrong with the sound card. Playing the cassette on my music centre should get the sound into the comp and into the comp speakers.... but I just cant get a peep
Background: I'm digitizing an old record. I used Sound Recorder to make FLACs of each side of the LP, and now I need to edit them down to individual tracks. I'm using the development version of Ubuntu 10.04.
Problem: Audacity ignores these FLAC files when I attempt to import or open them.
The FLAC files play if I hover the mouse over them in GNOME.
Audacity gladly imports FLAC files I ripped from CD last year (using Sound Juicer I think).
But when I try to do the same for my recorded FLAC files, nothing happens. I tried running audacity in a terminal window, and there is no additional output when I attempt the import. This comes out when I start it:
Code:
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
Expression 'stream->capture.pcm' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 3653
Looking at the file properties, they're basically the same except the Juicer-generated file has values filled in for title, artist, album, year. They are all FLAC Stereo 44100 Hz. I thought it might be a file-size problem, so I made a 5-second test with Sound Recorder, and that also refuses to import.
So, why do only the ripped files work with Audacity?
I want to be able to record the sounds coming through my soundcard with Audacity. How would i go about doing this?
View 1 Replies View RelatedHow do I record sounds coming from my computer using Audacity as opposed to input through a microphone?
View 1 Replies View Relatedwho has been able to make sound recordings with a Terratec DMX 6fire 24/96 soundcard? My Audacity does not find any source to capture from.
View 8 Replies View RelatedI'm trying to record some audio from 4-track cassette tapes using Audacity and a Sound Blaster mp3+ external usb audio card.I'm using Karmic.I have fiddled with levels on the sound card using alsamixer, but the only I way I can detect any sound from the tapes when recording is by turning the levels all the way up in alsamixer, and in doing this, I can faintly make out the audio beneath a large wall of static. If the levels are not maxed out, I only get static when recording in Audacity.
View 3 Replies View RelatedI'm trying to capture audio from a stream, NOT from the mic. This is what I'm doing: Start Audacity, push its record button, play a song. It shows that it is recording but when I play back the results, all background noise, conversation, etc, is in the recording as well as the audio from the song. If the mic is unplugged, I cannot record what I hear coming from the sound card (as in what you hear from the sound card is what you get). I got directions on how to do what I want here ( Looking (maybe) for audio mixer for use with Pulse Audio - Page 2 Posts # 4 and 5) but it's not permanent. I got the instructions in post #11 from that same page to make such a change permanent. I tried using the instructions to make the change permanent (I backed up my default.pa just in case something went wrong) and these are the changes I had made:
Code:
### Load audio drivers statically (it's probably better to not load
### these drivers manually, but instead use module-hal-detect --
### see below -- for doing this automatically)
#load-module module-alsa-sink
[code]....
I'm sure this is a painfully naive question, but I don't suppose it can possibly lower my reputationFor Good Reasons,use a custom build of the audio editor audacity rather than the version in the openSUSErepositories. What I can't seem to figure out is how to get it to find and load the LADSPA signal processing plug-ins. I have the regulation ladspa libraries (1.13-6.2) from the Oss repository installed. The files reside at /usr/lib64/ladspa . audacity is built with ladpsa support enabled, and indeed reports that it is enabled if I look at the Effects tab under preferences. I have even entered the ladspa library path in a "ladspa.conf" file under /etc/ld/so.conf.d, which may or may not help. Regardless, I don't seem to see the ladpsa effects listed when I run audacity
View 8 Replies View Related