I've recorded some video in the field, i.e. outside, windy, noisy, etc. I would like to strip out the audio, clean it up in Audacity and then repatriate it back to the video. Video is in .mp4 format.
View 9 RepliesI've installed Ubuntu 10.04 and it works like a charm, pretty much all over. However I seem to have problems using my M-Audio Fast Track Pro with all four channels - primarily when using Mixxx. I hate to switch between Win7 and Ubuntu just for the use of my VCI-100. Is there a way to have Fast Track Pro work? I tried almost any of the solutions found around here - but i simply cannot get it to work.
View 4 Replies View RelatedI have recorded some video, and now wanted to add some sound.I added a sound track, but when it's playing, I can't hear anything.I'm usually running Jack - for Ardour/Hydrogen etc... - I can't find anywhere in OpenShot to change the Audio to Jack, so assume it's not supported.I have killed Jack in the hope that Alsa will work with OpenShot, but still I have no sound.
View 3 Replies View Relatedi'm trying to take a mkv file The Tourist which has that cinavia audio track watermarking. i'm trying to convert the DTS audio track to AC3 to avoid it muting my movie on my ps3 while streaming it. I downloaded avidemux GTK+ copied the video and changed the audio to AC3 now when i browse the it says folders on my ps3 the new video file doesn't come up. i also downloaded the mkvdts2ac3.sh when i try to run it it says do you have dcadec installed?
View 1 Replies View RelatedI have an mp4 video which includes a 5.1 audio stream, while I only have stereo speakers from my computer. It is hooked up to my receiver through the audio out (headphone) jack from the back of the machine. Anyway, I have a stereo audio stream for the video, but I can't figure out how to add the mp4a stream to the mp4.
I have checked out avidemux, but it doesn't seem to handle mp4a files. I don't want to transcribe the video, simply add the audio to the mp4 container. Does anyone know how to accomplish this in Ubuntu?
It seems that the mp4a is us encoded as AAC.
I'm currently on vacation, and noted that the kdenlive version on my laptop (running 64-bit openSUSE-11.3 with KDE-4.4.4) will crash when loading a kdenlive file that has an audio track previously saved.
ie one can no longer reload a project, after saving it, if one has an audio track in the project.
I note my desktop (just before I went on vacation) did not have this behaviour. Has anyone else encountered this?
When I get back from vacation, I'll compare the packages between the two (ie between laptop and desktop). I note these packages on my laptop, which may or may not be relevant.
Code:
kde4-kdenlive-0.7.7.1-1.pm.2.1.x86_64
libmlt++3-0.5.6-1.pm.1.16.x86_64
python-mlt-0.5.6-1.pm.1.16.x86_64
libmlt2-0.5.6-1.pm.1.16.x86_64
mlt-0.5.6-1.pm.1.16.x86_64
sox-14.3.1-1.11.x86_64
ladspa-1.13-3.8.x86_64
I have a video file in which the audio runs faster than the video, so they quickly go out of sync. The way to fix it would be to separate the audio and video streams, speed up the video (the audio is FINE, it's the video that's wrong), and then recombining them. What is the easiest way for doing that?
View 7 Replies View RelatedI use ubuntu 9.04 and up until this week I could burn CDs using Brasero disc burner without incident. I have partially fixed the problem. I can now use brasero to burn data discs that have wave files for the songs, but when I try to make a audio disc I get this: "Track 1.wav" could not be handled by Gstreamer. I use synaptic and installed some more libs, but to no avail. Should I just install everything in Synaptic for Gstreamer?
View 1 Replies View RelatedIs there an application that anyone knows about that I can use to convert either an .flv or .ogg file that contains both audio and video to just an audio .ogg file (preferably vorbis+theora) without audacity? I'm fairly certain audacity could accomplish this but it seems like overkill for what I'm trying to do and the computer I'm trying to use does not run it so well.
::EDIT:: I should also mention that I've tried looking on google. I did find downloadhelper extension for firefox which uses ffmpeg to convert the files but I don't see any obvious way to strip the video.
To get multimedia working, or explain what I'm doing wrong.
The problem is that none of the video players doesn't play video, they show only black window and play audio.
I have Fedora 11 Leonidas, fully up-to-date.
I have installed rpmfusion and livna repository.
I have installed following packages:
When I try to play video with totem, it doesn't output any error, but just doesn't play video.
with mplayer:
xine and kaffeine just say:
vlc:
I tried several different files, which works perfectly in windows and ubuntu.
I installed windows binary codecs for mplayer to /usr/lib/codec/
I have a video file I wish to extract the audio from .... its a seminar that was recorded in mpeg but all i need is the audio into mp3 .
View 9 Replies View RelatedI want to separate video and audio from movie file, how to do it in Ubuntu? And how to combine video and audio in Ubuntu?
View 2 Replies View RelatedI'm not getting audio when I play a video file.
Code:
mplayer Naruto/Naruto Shippuuden - 185 v2.mp4
MPlayer 1.0rc4-4.4.5 (C) 2000-2010 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing Naruto/Naruto Shippuuden - 185.mp4.
libavformat file format detected.
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (aac), -aid 0, -alang und
[code]...
What program can i download & install to play my MP3 Audio files & my MP4 Video files in Ubuntu 10.10?
View 3 Replies View RelatedI have ubuntu 9.10. Video is working , but sound not working. When I type, sudo aplay -l, a message **** List of Playback Hardware Devices **** shown. But there is no list. My computer is Intel 810 onboard sound AC '97 (codec ) system. More information in this page: [URL]
View 1 Replies View RelatedMy work just installed a new surveillance system and it uses .box video files and .idx audio to go along with it. They have a windows program to view them but I would love to keep on using my Ubuntu laptop.
View 1 Replies View RelatedFor some reason, I cannot record video with cheese. I cannot record video and audio on ....., just video. I can record audio on sound recorder. Why can't I get both? I have an e-machines (acer)em-250, 2g ram, 2ghz intel atom processor. Using Moon Os 4 neak (ubuntu 10.10 variant). I have downloaded and installed ffmpeg, and all other codecs. I can also get video on google voice and video, but no audio. Obviously I have a built-in webcam and mic. I've had this problem with every ubuntu distro I've tried since Oct. of 2010. This netbook came with Win. xp, and I had no problems with this issue then. I would just REALLY like to be able to use my webcam and be able to record video and audio.
View 3 Replies View Relatedi'm able to get videos without any issues. but i'm not able to receive video/audio from foxnews and other video sources. the on screen gizmo just keeps spinning without downloading any video or audio.
i use ubuntu 11.4 on toshiba notebook nb505
after installing opensuse 11.3 i am finding that i cannot recieve any audio with video with any application.
i can hear certain types of audio, it seems any audio that is not attached to video. i can hear the welcome chime through my speakers after i log in to opensuse and i can also listen to .mp3 files played with amarok. i can watch videos with multiple players, videos videos etc., but there is no audio happening with the video.
i am thinking now this may actually be a hardware problem, since it seems to persist with different software, and only with audio attached to video. i'm thinking maybe there is a problem with my graphics card and its driver (or a lackthereof), although i'm unsure of why i can still watch video. i don't receive any error messages or anything, nor have i attempted to manually install any drivers for my existing hardware. i tried cranking every volume control i could find, including the system volume, but still no volume with video (its weird, its like i can hear it a tiny bit when i crank it, perhaps this is just the internal system beep speaker trying to fill in for the gfx card?).
the card i'm currently using is an nvidia card and although its not exactly old, i have read about some problems with nvidia being reluctant to produce drivers for linux in the past. after some brief googling of nvidia and linux, i was surprised to see that nvidia has an entire portion of their site devoted to unix/linux and open source drivers (perhaps they're doing better now).
is there any way that i can troubleshoot this problem, or do you think the solution is simply purchasing another graphics card from a vendor that has a good reputation for linux support?
I have a mp3 file and would like to convert for video, the jpg will be the image of the video.
View 6 Replies View RelatedMy vlc player does not show video of a movie but plays audio of that file crystal clear !! See the attached screenshot!!
I uninstalled completely and reinstalled but in vain!
I seem to be having some audio clashes. I use Exaile to play music (if that matters), and after I play music, no sound comes out of videos (not just Ubuntu, it won't work from Yahoo or MSN videos either). Then when I try to go back to playing my music on Exaile, no sound will come out of that. Likewise, if I restart the computer... the sound works again. If I instead watch a video first, there will be sound -- but as soon as I try to play music from Exaile, nothing comes out.
View 6 Replies View RelatedI'm using a PS3 Eye, which seems to work out of the box on my Ubuntu 9.10 system (both Skype, and Cheese). When I have a pidgin chat window open for one of my contacts, in the media options (under Conversation) the audio, video, and audio/video option is ghosted out (non selectable).
I have the Video plugin checked (ticked), with the input video selected (the cam shows up in the list, and it's selected): for the Eye, I select for both the Audio and Video device. But when I close the plugin configuration window, it defaults back to "Default" which i'm guessing is part of the problem.The audio and video options in pidgin is relative to my system correct? So even if the other user doesn't have that capability, it'll still let me use audio/video for them?
I'm not sure what's causing it, but when I play or pause a flash video in Firefox or Chromium, there's about a second of audio delay.
View 1 Replies View RelatedI want to convert all video file in folder a become audio file in folder b use ffmpeg, how to type it in terminal?
View 7 Replies View RelatedI'm trying to extract the audio from an mp4 video file and convert it to mp3 using ffmpeg. The problem is that the resulting audio file is only 3m2s long, whereas the video file is 8m15s long. Anyone know why the audio file is being truncated? Am I doing something wrong? Apart from being truncated the mp3 file plays perfectly. Here's what ffmpeg has to say about the video file:
Code:
Seems stream 1 codec frame rate differs from container frame rate: 59.83 (59834/1000) -> 29.92 (359/12)
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Part1.mp4':
Duration: 00:08:15.60, start: 0.000000, bitrate: 541 kb/s
Stream #0.0(und): Audio: aac, 44100 Hz, stereo, s16
Stream #0.1(und): Video: h264, yuv420p, 1152x720, 29.92 tbr, 29.92 tbn, 59.83 tbc
And here's the command I'm using to extract and convert the audio:
Code:
ffmpeg -i Part1.mp4 -ab 128k Part1.mp3
I want to do a screen capture with audio and video. I use Ubuntu 10.04 64-bit.I have now spend about half a day trying various tools, most of which seem to be half finished or abandoned. I have not found any usable docs for any of these.gtk-recordmydesktop and xvidcap will both capture video, but seem unable to capture audio from a microphone. The mic is connected and the sound preferences "input" tab shows the input level jumping up when I speak, so it must be working.
I tried the pulse audio device chooser app to make sure the mic is selected, but the choices for input are DEFAULT and "other", which shows a blank input with no choices.xvidcap multi-frame dialog has dev/dsp pre-selected as the input device, with no other options. It does not work.If I enable audio with gtk-recordmydesktop, it refuses to start and says it cannot open the sound card. There is no apparently no way to do this using the "advanced" dialog which has DEFAULT preselected as the audio input device and no other options. /dev/dsp also fails to start.I spent some time searching google and the forums here, to no avail. So should I give up trying to do this with Linux or is there some obscure method I only need to discover?I prefer xvidcap, since the ogg format output by recordmydesktop seems to be a write-only format.
First up, let me say this post has almost nothing to do with Ubuntu, so you may ask: Then why am I here? I am here because I didn't know where else to turn.
My main problem here is that I would like to be able to record myself playing a video game on my TV, and be able to toss the file onto my computer to edit/upload. I've heard of 'Dazzle' those TV recorder things, but I'm looking for more of a home quickfix.
What I was thinking of doing was hooking up a DVD player to a tv. Then hooking up my wii to the DVD player, to the TV. This way the game would be displayed on channel three. If I were to do this, would I be able to put a blank DVD in the drive, and set it to record channel three? Since channel three will be my game, would it record the video game? I'm sure if it would, it wouldn't be the best quality.
My girlfriend is using Karmic and we're trying to get video and audio to work in aMSN.
We confirmed farsight is installed:
Code:
libgstfarsight0.10-0:
Installed: 0.0.15-1ubuntu1
Candidate: 0.0.15-1ubuntu1
Version table:
[Code].....
That returned nothing. So, valve is not in the plugins that we have. Apparently, it is not in the farsight that we have either, if I've interpreted posts right.
And my issue is that I've never built from source or package or anything. sudo apt-get install and adding to the sources.list file is the experience I have. So, if I need to do source building, I'll need guidance.
1)i have used Arista-transcoder recently and whenever i used to convert some formate it shows me the message for the updater(Codecs).for this i add repository to Soft source after that it start downloading but meanwhile in downloading it shows me the error.Moreover,You can see the error in the pic,which i have attached...
2)is their any other converter which i can use for Both purposes(Audio&Video)other than Winff and Arista?