I've upgraded Ubuntu 10.04 to Ubuntu 10.10 yesterday and I'm experiencing some issues now.
Audio is out of sync for all videos I'm trying to watch in VLC (sync was 100% fine in Ubuntu 10.04).
Audio sync method. "Stretches/squeezes" the audio stream to match the timestamps, the parameter is the maximum samples per second by which the audio is changed. -async 1 is a special case where only the start of the audio stream is corrected without any later correction.Searching the net makes one believe that this command is just some sort of magic.People just put it in the line and it just works. Isn't that nice?
It says nothing about how to change the TIME the audio starts syncing. Like do I want it to start 5 seconds delayed? Or what about 5 seconds sooner?What if the audio gets more out of sync as the video goes on? Can I slip it a little at a time? What? No magic?No one mentions a file that already has badly synced audio.So what -async 1 really does is simply start the audio at the beginning of the file. LIKE AS IF THAT ISN'T STANDARD PROCEDURE?So what is the exact solution to syncing a messed up video? And why can't it just do the proper "timestamp" sync in the first place?No docs, no info and you are left out in the cold.
I watch alot of news videos and within 1 - 2 minutes the video and audio become out of sync. The video is lagging the audio. I'm using 10.10 32 bit with Shock Flash 10.1 r102 on Firefox. Will the 10.2 beta flash fix this problem?
View 2 Replies View RelatedI put all my dvds on my "media center" by converting them to .MP4 with handbrake.
Recently I saw that with a MKV file you could do soft subtitles. I tested a part of a movie, and the audio and video are very out of sync.
With MP4/burned in audio everything is ok...
Edit: Ow yes I'm using XBMC for playing it. MP4 + MKV files are both H.264, they have the exact same settings except for subtitles...
Weirdly Enough: I tried another video and at this one the audio is in sync....
After upgrading to 11.04, video and audio are out of sync by about one second when playing movies in VLC, or opening a clip on the web. Reinstalling does nothing.
View 9 Replies View RelatedI am burning DVD iso's and they seem to work great I have video output and sound output however as the film goes on the audio gradually becomes more out of sync but if I hit the rewind button on my remote and then play the sound is in sync again for a few minuets. I am using DeVeDe and Gnome Baker to create and burn my iso images to disc and they work great on the computer but not so great on my dvd players I am burning onto Verbatim DVD-R using Ubuntu 10.04 lucid lynx.
View 3 Replies View RelatedI try to record video with my Win TV capture card with avconv. The exact same lines worked fine with Ubuntu 12 and with SUSE, but with Ubuntu 14, the audio is out of sync.
avconv -f video4linux2 -channel 1 -s 640x480 -i /dev/video0 -deinterlace -f alsa -i plughw:1,0 -ar 22050 -ab 64k -acodec ac3_fixed -vcodec mpeg4 -vb 2000k -y test.mp4
I am attempting to backup DVDs that I own to .iso format so that I'm able to watch them using xbox media center. I've simply been copying the entire DVD to my HD in .iso using brasero.When I watch the .iso file in XBMC, the audio is a fraction of a second ahead of the video. The gap between the audio and video doesn't seem to change over the duration of the clip.
What are the likely causes of this issue? I've read that it could be a slow processor, little ram, or inadequate video card. If it's indeed a hardware issue, I suppose I'm SOL with my current laptop: a 2006 dell with a core 2 duo processor, 2GB ram, and a middle of the road video card at that time.Is there any software tweak I can explore to get the .iso file to sync properly?Also, I know it's customary for posters to list their system specifications, but I don't know how to call up my software or hardware setups.
I have a problem with avconv. Most of the use cases work spledidly, but when I need to crop a segment and then splice multiple segments together, I get problems.
The process I use is this:
1. Raw recording of short segments in high-quality AVI, These are produced by avconv, some as screencast and some by combining a PNG file with flac audio from audacity.
2. Conversion segment by segment into mp4 and ogv
Options A: -acodec aac -strict experimental -ab 128k -ac 2 -vcodec libx264 -s 640x480 -pix_fmt yuv420p -movflags +faststart -crf 22
Options B: -acodec libvorbis -ab 128k -ac 2 -vcodec libtheora -s 640x480 -b 500k
3. Splicing of the segments using MP4Box or oggCat.
(I used to do this in ffmpeg, but I have not figured out how to do it in avconv.)
This works.
In some cases I need to crop the segments, using the copy codecs and the -ss and/or =t options.
If I crop the AVI segments (between 1 and 2) the sound is clipping (this also generates a spree of error messages `Non-monotonous DTS'). If I crop mp4/ogv segments, (between 2 and 3) the remaining video, after the cropped segment are out of sync. I get the same problems with both OGV and MP4 playing them in vlc. Playing the mp4 directly in iceweasel works as it should.
So I got myself a USB capture card (EasyCap) to use for capturing gaming, digitizing my kids' old VHS movies, etc. It works fine, I've been using VLC to view and record stuff from it, but I've noticed one issue. When recording streams via VLC, even with no other programs running to give VLC as much CPU time as it wants, the audio slowly falls out of sync. I've tried the MP4 (H264/MP3) container and the OGG (Vorbis/Theora) container.
Early on you can't hardly tell, but the further into a movie you get the more out of sync the audio gets, so that by the end of the movie the audio is a good 1-2 seconds off. It's not a set amount either so I can't just split the audio to a separate file then shift it one direction or the other to make up for the difference, because like I said, the offset starts out at nothing and gets progressively larger as the movie goes on. When I select "display locally", the video/audio that is displayed stays in sync, only the video/audio that gets committed to the output file falls out of sync, and it doesn't matter if I play the file with Totem or VLC.
I have a couple of .avi clips in which the sound plays 2 seconds before the video, so I need a software that can re-sync the sound correctly with the video with affecting the video/audio quality, what program can I use? What is the name of this feature in video editing programs? I am using Ubuntu 10.04. I noted that the Multimedia & video forum have only threads about problems in playing videos & cards drivers problems.
View 3 Replies View Relatedmy goal is to record video using a canon powershot camera, edit the avi file on my ubuntu 10.04 computer, then upload the rendered file to videos.
problem is that when i cut the video, the audio is no longer in sync with the video, it's off by about 1-2 seconds. this happens with both openshot and pitivi, so i suspect that it's caused by a bug with the codec. (files are avi with mjpeg codec). after searching launchpad, this is apparently a "known issue". that's great but for now i need a workaround.
i do have an old g4 powerbook with imovie hd v6 on it that i can use, but i'd prefer not to because:
1. the powerpc mac is much slower than my new dual core laptop
2. imovie compresses my videos too much so the rendered file is lower quality
3. i simply prefer openshot to imovie
i was thinking of preprocessing my avi files by converting them to another format with a non-buggy codec on linux. i downloaded ffmpeg, but not sure how to use it and what format to use. would mpeg2 be a safe one to use?
I've upgraded my computer to 9.10. There is no audio output. I don't hear the quirky little sound when I boot up. There is no playback of my music library using mplayer or vlc. There's no audio from Hulu or the TV network's direct sites. I've enabled pulse audio -- I found a reference to it in someone else's post. Medibuntu is loaded and the codecs downloaded.
View 4 Replies View RelatedI recently upgraded to Ubuntu 10.04 and my sound is not working. I have a gateway p-6860FX. i've had this trouble since 9.04 and also in 9.10, but I worked around it by adding the following to my alsa-base.conf with
Code:
Sound worked fine after that, but it doesn't work with 10.04
Here are the results of aplay -L
Code:
I went in to alsamixer and turned everything up. it didn't work.
following chained updates of my music server from 10.04 to 11.04 I no longer have any sound, which is sort of bad for a music server...Primary soundcard in the setup is USB So I tried the command posted in various "no sound" threads
sudo aptitude --purge reinstall linux-sound-base alsa-base alsa-utils linux-image-`uname -r` linux-ubuntu-modules-`uname -r` libasound2
Which reinstalled stuff as expected, except had this error in the output: Couldn't find any package whose name or description matched "linux-ubuntu-modules-2.6.38-8-generic" Could the error be because of backports?
aplay -l helpfully reports aplay: device_list:240: no soundcards found.
and the output from
wget http://www.alsa-project.org/alsa-info.sh -O alsa-info.sh && bash alsa-info.sh
can be viewed here:
http://www.alsa-project.org/db/?f=cb...54c3f65b70dec7
I have been using the streaming audio feature in Firefox for years, and have upgraded Ubuntu with each new release. I've never had a problem with streaming from my favorite radio stations until I upgraded to Natty. If I know the IP and use Audacious or another client, I can still stream through them-- but not from my browser any more. Flash-based content works OK too.I have upgraded two computers from 10.10 to Natty (desktop and laptop) and it has happened with both. the desktop is the 64-bit system (AMD), and the laptop runs the 32-bit OS (Intel). We have two other computers still running 10.10, and they're both still OK. I have uninstalled and reinstalled the xine plugin (which seems to do most of the streaming), VLC, and a couple of others. No luck. I don't think I see any gaps between the codecs installed for the 10.10 computers and the ones running Natty.I tried Chrome -- same result.
View 1 Replies View RelatedI am running a 64-bit version of lucid that I just upgraded the other day. At first everything was working fine, but after some upgrades (don't remember which ones) I get an oss4-dkms error and I have no audio.
I have tried a bunch of things that I found online, but nothing has seemed to work and at this time I am a little lost.
Following is some information:
I lost front audio after alsa upgrade to 1.0.23 headphone and mic doesn't work anymore . Anybody out there who can help a newbee.
HDA-Intel - HDA ATI SB VIA VT1708S ALSA Information Script v 0.4.59.doc
ALSA Information Script .doc
Majority of the videos I play with VLC the audo is out of sync, I have to delay it about 400ms to sync it. This only started happening after I upgraded to 10.04 64bit ( from 32bit ). Could it be a bug in the version of VLC I'm using (1.1.10)?
View 2 Replies View RelatedI have found that if I change the FPS of a video, the audio is out of sync.
Is there a way in mencoder to have it correct this, and maintain the correct sync?
I don't think it is just a matter of audio/video delay. I have tried many times to correct this via that method, and it doesn't come close. Although, if I encode the video to another format, but with the original fps, the audio is sync'd.
V.L.C. and all others - but Totem - video players that I have installed have audio out of sync. This occurs in both D.V.D. and .mkv & .avi. I had this problem with V.L.C. 1.1.10 & now with 1.1.11. I do not think that this is a problem with V.L.C. since I have had the same issue occur with gnome-mplayer. I tried to downgrade gstreamer*, and that did not correct my problem. It shouldn't be a problem with libdvd* since the problem still occurs with files on my drive. Handbrake doesn't fail to rip D.V.D correctly.
Because of all of this I figure that it must be a system library that Totem and HandBrake don't use ( or bundle most likely in the case of HandBrake ).I am using Fedora 15 x86_64 with all updates to date.
How to sync audio and video which is captured from a aeperate camera device and a microphone,how to relate timestamps to audio and video to syncing.I m capturinfg video at 30fps and audio 160 samples everytime so how these 2 should be related to sync and playback at a time
View 1 Replies View RelatedI've been trying to use cheese to record greeting from my kids to grand parents etc. But every time I record a video, the video is choppy and the audio sync is off. I've used the one in the (F11) repos and built it from source. It behaves the same using other distros as well. Is this par for the course with cheese, or is it my hardware?[URL]... Any other applications/methods to record audio & video while providing a video.
View 2 Replies View RelatedHow can one adjust/sync audio and video in gnome-mplayer while watching video
The following is my configuration :-
OS : Opensuse 11.2
Media Player : gnome-mplayer 0.9.9
I am trying to use ffmpeg and mencoder to slice a portion of my video out but the audio is always 2 seconds out of sync.
ffmpeg -i bird.avs.MP4 -acodec copy -vcodec copy -ss 00:08:40 -t 00:01:00 test.mp4
mencoder -ss 00:08:40 -endpos 00:01:00 -oac copy -ovc copy bird.avs.MP4 -o test.mp4
mencoder -ss 00:08:40 -endpos 00:01:00 -oac copy -ovc copy -noskip bird.avs.MP4 -o test.mp4
[Code]....
able to get an I pod nano 3rd gen 4gig to sync with Rhythm box or sync rhythm box back to the Ipod?
View 2 Replies View RelatedHow I would capture on-screen audio AND my webcam audio at the same time.(My webcam seems to rely on pulse).
View 1 Replies View RelatedI want to listen to this audio file: [URL] but my real player 11.0.0.4028 gold desn play it, it says that there is a codec 28_8 missing, I go to relaplayer page, download the last release available for linux systems, but the message is the same : audio codec missing and doesn't play the audio.
I havev tried to play the audio with smplayer (not luck), vlc can play the audio but the pause button doesn't work so I have to listen the entire audio all the time I stop it playing. Is there any audio player capable od reproducing in the proper way this audio in ubuntu? No one of my video players totem, smplayer, realplayer or vlc are capable of playing this video: [URL]
What is available for ripping audio CDs besides Rhythymbox and Audio CD Extractor?
View 6 Replies View RelatedI'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
