On Ubuntu lucid 10.04 Beta , I can see on Sound Preferences -->Input Tab , No input level sliding moving where input volume is 100% and device for sound input is Internal Audio Analog stereo. That's why I am unable to record on Sound Recorder. But the sound works where I can listen to music or video but not sound recording.
View 1 RepliesI have been using mencoder to record audio and video from my Logitech Quickcam Pro 9000. I've been using the following wrapper script under 10.04:
Code:
#!/bin/bash
outFile=$(date +%Y-%m-%d)
mencoder tv:// -tv driver=v4l2:width=800:height=600:device=/dev/video0:forceaudio:adevice=/dev/audio1 -ovc lavc -oac mp3lame -lameopts
[Code]....
The video and audio work in other applications, but for some reason mencoder isn't using them. I don't like Cheese because it seems like I can't get equally high framerates at good resolution, and besides I want to be able to run this from the command line.
For some time, my microphone input doesn't reach the recording application, but instead goes directly to the loudspeaker. If I make a sound in the microphone, it will go to the loudspeakers, and Audacity or Skype will not "hear" anything (and of course, with this set-up, there's a constant noise in the loudspeaker, coming from the microphone).This problem goes away if I install PulseAudio. So obviously, there's nothing broken with either of ALSA or hardware, only some misconfiguration somewhere, and PulseAudio can make a sense of the mess. Playing with all sorts of configurations in Alsamixer didn't help.
Unfortunately, I don't want PulseAudio, because it causes output problems which are a bit too subtle for me to describe coherently here. So I'd rather fix ALSA than Pulse.Please direct me into how to investigate this. The OS is Debian Unstable, the audio card is an integrated Intel ALC1200.
I'm having problems getting my microphone to work on a new Kubuntu 10.10 install. I'm not sure what's wrong, but I can't make Skype calls (in which the other party hears me).
View 2 Replies View RelatedI have a Sony VAIO VGN-FW200 laptop and I wanted to use Audacity or some other application to record sound. However, since there is no sound card, the only option is to use the microphone to record. Is there any way to get a free virtual sound card, or record without using one (and without using the microphone
View 7 Replies View RelatedWhen i want to record sound it record but the voice is very low.which means i need to turn up for full wolume on both headset and pc when i want to hear it, and it still is very low sound..I've tried.Re-installing audacity changing microphone plug microphones directly to pc instead of through headset.both the 'pink' and blue jacktick port (also with above options)
View 2 Replies View RelatedI've been trying to make screencast, but I also want it to capture the sound coming from the computer; In other words, I do not mean the microphone. I tried changing the sound device from DEFAULT to pulse with no avail
View 4 Replies View RelatedI'm trying to record music playing on my computer with the sound recorder/audacity but there is nothing audible being recorded. I've installed PulseAudio Volume control and selected monitor of internal analog stereo. I can't figure out if I have an output/input incorrectly selected but maybe someone could take a look at the screenshots and provide feedback! I have a dell xps 8100
View 2 Replies View RelatedI'd like to be able to record what's playing on my sound card. How do I do this, with audacity or whatever? There seems to be little information around and what of it I've tried has got me nowhere
View 2 Replies View RelatedI just did a clean install of opensuse 11.3. Pretty much everything is working greatHowever, I tried to record a video of a ..... stream and the sound didn't record while using xvidcap. I'm using all default settings
View 9 Replies View RelatedI posted my question on Linx.com, but have not received an answer after 75 viewers to my question:
Ok my respected Linux genius. This is my project. First I have a Windows / Linux combo OS set-up!
In my windows, I use the latest realtex sound driver as this gives me complete control with recording output control and Microphone gain control. In the set-up, there is a stereo mixer component with is necessary to engage the direct sound recording from my sound card. To make this all come together, I use a sound recording software [ free sound recorder 9 ] and to convert the recording to a wma, wav, or meg, I use Roxio 10 to produce audio cd's to play on all CD Players.
The challenge for me in Linux is to create the same set-up with Linux applications to produce the same professional results.Presently, my kubuntu 10.04 has Alsa sound drivers, with a version of realtek incorporated. I have the Alsa mixer software as well as Audacity as the sound recorder program. But no matter what I do, audacity depends on the microphone to record, which makes the final recording pure crap. If I lower the microphone boost or gain in my Alsa mix, then Audacity can not record the ambient sound from the speaker output and it will only recognize mono and pulse as the sound method. With the pre mention set up, Who has a set up identical to what is offered to windows that will do exactly the same for Linux. I basically want to record directly from the sound card in my Linux, without depending on using my microphone and then a CD burning program to make the conversion to MPEG or the necessary file format for the burned CD to play in all CD players, not just on a PC) I am trying to stay away from command line language in the terminal. I really need a replacement for Audacity,cause Free Sound Recorder is made for Windows Platform......I need a Linux sound Guru for the answer.I am not doing this to pirate music....I have over 3,450 music track inside my Rhapsody subscription and I like to record music for personal listening on my portable CD player and at 0.99 per track charge to do this in Rhapsody, I might as well by a recording studio and hire the singing artist.Basically in short..I need to know if there is a setting I can engage in my Alsa Mixer panel that will allow me to record directly from my sound card without using my microphone as a default. When I mute the microphone in my Alsa control panel, my Audacity program will not record using the microphone, which I do not want to use anyway. I just want to record straight from my sound card, as this eliminates all hiss, distortion that is inherited with using a microphone.
I am trying to use Skype beta on my acer aspire one with ubuntu 10.10. The video runs brilliantly and i can also here my wife from the other end but she cannot hear me. Apparently something is fishy with my mic input. I tried alsamixer and everything is in unmute. My alsa version is 1.0.23. The only think she hears is a loud hissing noise which is normally my bat voice but she doesnt need to know that. I can record my voice in the sound recorder but nothing comes out in Skype!
View 6 Replies View Related1 i have tried to get my sound output working in totem kaffiene and banshee to no avail. reading through several blogs posts and the such of likes has gotten me to ttry and set pulse alsa and oss so im even more confused. i can get a sound test to play but cannot get music to work??
2 i would really like to use audacity to record but it keeps hanging after about three seconds. i purchased a new acer aspire 5532 and deleted windows 7 to encounter
I'm trying to record some audio from 4-track cassette tapes using Audacity and a Sound Blaster mp3+ external usb audio card.I'm using Karmic.I have fiddled with levels on the sound card using alsamixer, but the only I way I can detect any sound from the tapes when recording is by turning the levels all the way up in alsamixer, and in doing this, I can faintly make out the audio beneath a large wall of static. If the levels are not maxed out, I only get static when recording in Audacity.
View 3 Replies View RelatedRelated thread: [URL]...
- Installed all possible latest updates.
- All Mixer sliders ar MAXED.
- Tried steps described [URL]...
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI have detected some problems when I try to record sound in my Kubuntu 10.04 system.
The problem is that the "default" device for audio recording does not work but I have to select another device to do so. I always selected the "default" device for audio recoding but currently I have to select hw:0,2 device.
Another odd thing is that different programs show me different device. For example, Audacity shows me that I have the following audio recording devices:
- HDA Intel: ALC888 Digital (hw:0,1)
- HDA Intel: ALC888 Analog (hw:0,2)
- spdif
- default
The only one that works is hw:0,2.
But arecord shows me (when I execute "arecord -L") the following:
Finally, in KDE system preferences for audio I get that I have 2 different audio devices for audio recording:
- HDA Intel (ALC888 Analog): it is said that it will try first x-phonon (CARD=0, DEV=0) and, if the latter does not work, it will try plughw (CARD=0, DEV=0)
- HDA Intel (ALC888 Digital): it is said that it will try first x-phonon (CARD=0, DEV=1) and, if the latter does not work, it will try plughw (CARD=0, DEV=1)
Where is the hw:0,2? and how can I set the alsa system to use hw:0,2 as the default device for audio recording?
All of that would not be a problem but I also have an ubuntu 9.04 installed on a virtual machine (by using virtualbox) and audio recording doesn't work there. I suppose that it is becase of the virtual sound card is using default devices for playing and recording audio.
I must say that audio playback works fine in both host and guest systems. It is just audio recording.
Running Compiz as a standalone WM.Managed to get Slim working, will post how later, but have no sound. If I boot using gdm3 the sound works. Obviously gdm3 loads something Slim doesn't, but can't workout what!Tried adding /usr/bin/pulseaudio --start --log-target=syslog & to my script - no dice, still no sound
View 2 Replies View RelatedI can play sound files with aplay, esdplay, and vlc, but I don't get any sound from iceweasel and chromium.
I installed a squeeze base system (without gnome and without the standard system utilities), then added (using --no-install-recommends) xserver-xorg-core, xdm, fluxbox, alsa-base, alsa-utils, alsa-oss, iceweasel, chromium-browser. Here I checked for sound and there was none from the browsers. I have since installed vlc, esound-clients, alsaplayer-esd, gstreamer0.10-alsa, and other software that didn't look sound-related and didn't change the symptoms.
Setting ICEWEASEL_DSP to "aoss" or "esddsp" doesn't help. Neither does "chmod -R 777 /dev/{audio,dsp,midi,mixer,snd}". snd-pcm-oss and snd-mixer-oss are loaded. Both my account and root are in group "audio". Running the browsers as root doesn't help.
This is the output of chromium:
In case it makes any difference, all of this happens in a qemu-kvm virtual machine with an emulated es1370 soundcard. Same with sb16 soundcard.
I would prefer not to install everything vaguely related to sound in the repositories in the hope of things fixing themselves. That's just ugly, plus I have only 200MB free space left.
I have no problem playing all videos and sound files. I have installed most codecs and propriety software. I can play all downloaded .flv videos from all the sites except one. When I open the .flv file from this site, I get "internal data stream error."
View 2 Replies View RelatedI have Ubuntu 9.10. Clean install. I have a cheap headset but can't get sound to come thru the headset. The mic works, but sound only comes from main speakers.
I do not have a HP, SONY or anything like that. I bought my pc barebones and built myself. So there doesn't seem to be any easy fix for my pc. Here are the specs:
Gigabyte MB model# GA-M61SME-S2 code...
Since upgrading from 9.10 to 10.04 sound now only works some of the time. One boot it will work perfectly and another boot it wont, the gnome sound mixer basically says that it can't detect a sound card.
I've compared lsmod when it does vs doesn't work and I've noticed...
Working:
Code:
Not working:
Code:
So it seems like the driver/module isn't detecting or initialising my card on some boots.
I have a Zotac Mag Atom computer with Nvidia ION graphics. This computer i use as a HTPC hooked up to my 42" LG flatscreen via HDMI. The problem i have is that after have installed de correct graphics drivers the graphics chip only sends picture over HDMI whilst there allso is going sound.
View 2 Replies View RelatedI have a problem with these new earphones I've got.
When I play music in Banshee, I can only hear the instruments and barely the voices.
However, when I play the same files in VLC, I can hear everything 100%.
Can anyone explain what is going on?
I have sound if I use aplay or start totem using sudo but neither have sound if I try aplay or totem as ordinary user. The groups command shows my user name is a member of the audio and video groups. If I look at the /etc/group file it also shows pulse as a member of audio group.
This is a command line install from the 10.04 Alternate CD to which I installed xorg, icewm, gdm, nautilus, synaptic, totem, firefox, gstreamer, alsa, pulse, and others. Every thing works except the user audio. Totem will show videos but no sound. Totem will play MP3 music files (show the cover art and the progress) but no sound. But it all works ok, good sound, if I start Totem as root.
What am I missing? I don't expect in depth help with this installation but thought maybe something would just pop out at someone?
Recently I installed Renoise demo and followed their install instructions from the Renoise 2.1 quickstart guide. It said if you get any errors to do the following:
Configuring Realtime Threads:
If you get a warning message when you start Renoise, read this section. To allow Renoise to create realtime threads, which are required for low latencies with ALSA or JACK, you have to
edit the /etc/security/limits.conf file. A realtime kernel does NOT help here, it does not set the required options automatically! To enable RT thread creation via PAM open the /etc/security/limits.conf file in a text editor as root (or sudo). Then somewhere near the end of the file add:
YOURUSERNAME - rtprio 99
YOURUSERNAME - nice -10
Replace YOURUSERNAME with your username. You can discover this with the 'whoami' command.
Alternatively you could also create a group named "Audio", add your user to that group, and use '@Audio'
instead of 'YOURUSERNAME'.
Save the file. Log Out. Login. At this point it should be working. To verify that it works, launch Renoise, select ALSA and make sure the 'Realtime threads' option is on. You will get a friendly warning like the one above. If RT creation failed. Try again.
Jack Configuration
If you don't have "Jack Control (JACK Audio Connection Kit)", we recommend that you install it.
Jack Control allows easy Audio/MIDI routing with an intuitive GUI. On Ubuntu:
$ sudo apt-get install jackd qjackctl
Now you can start it from [Applications] -> [Audio] -> [Jack Control].
Click the "Setup" button, and set following values:
Change the "Priority" value to 89. (If you use realtime kernel, also add check mark beside "Realtime")
Change the "Periods/buffer" value to 3 or more.
In addition, please configure latency and other settings according to the needs of your system. Now I don't have sound where and when I used to, for example: songbird no longer plays sound tho it plays the track and no sound in web browsers aswell, like ..... plays but no sound. It has to be something simple because audio for everything was fine until editing that one file and installing that audio jack program.
I am using Ubuntu 9.10. My sound works fine unless I have headphones plugged in. I've tried 2 sets of headphones, and it doesn't work with either set, so it's not the headphones. The volume is not muted (it's at 100%) for the headphones either in alsamixer. How can I diagnose and fix this?
lspci -v
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
Subsystem: Gateway 2000 Device 0562
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f3010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
[Code]...
I've installed Lucid Lynx in both kubuntu and xubuntu variants, and experienced the same problem, (Note I'm also still running 9,04,on the same computer, trouble free). With 10.04, the problem is that sound playback software works initially, but drops the connection with the sound driver randomly, at times varying from a few seconds to a couple of minutes. It seems to happen regardless of whether Alsa or PulseAudio is set as default. This happens with Movie Player, VLC, Audacity, and with Flash in Firefox - they all appear to start normally, with sound, but soon fail. (Again, I don't have this problem with earlier releases, using the same computer) I know little about sound configuration.
View 5 Replies View Relatedevery time i watch a video at ....., or use audacious to listen to music (or instead use grooveshark) the sound jumps forward automatically for some strange reason.
The other problem is the graphics. Everytime i enter a website i see the graphics but pixelated. At 100%. Well. i don't see all images or banners like this, just a few. (i.e:Google logo, flickr logo).
im using a laptop. Acer 5735Z. Mobile Intel Graphics Media Acelerator 4500MM
I've just installed Ubuntu and it seems the sound isnt working in it. Anyway - i have two screens. One is a tv and i want the sound to come out of there(its running through a hdmi cable).Works completely fine in windows. I havn't installed nivada plugin thingy as it stops my dual monitors working =(. So maybe this is the problem? From what i remember it worked in wubi though (without nivada drivers)I followed the troubleshoot and couldn't seem to find anything wrong?
View 5 Replies View Related