Debian Multimedia :: Installing Nvidia Drivers In Lenny?
May 27, 2010
I'm still getting used to the system. I've been able to install a couple of packages like Disk Manager and Firefox, and was able to mount my ntfs drive. I've only learned some basic terminal commands, but I'm managing ok so far. That is until I looked into what was involved in installing the video drivers I need for my Nvidia 8400 GS card. (ouch!) I'm trying to follow the guide here: [URL] but I've run into a snag in the 'Overview' part: "0. Make sure APT has non-free and contrib sources (consult the sources.list(5) man page for help on doing this) " The link provided [URL] is dead. With only a basic understanding (next to none) of what the sources.list is for, I'm unsure how to fulfill step 0.
I'm running Lenny and the nvidia driver is 173.* I need to upgrade to the current nvidia driver but when go to install it I get the message that it was copiled with a different version of gcc and might screw up my kernel. any suggestions to upgrading to the current nvidia driver?
I have installed Ubuntu Maverick 10.10 RC in my PC, everything works fine, but after install Nvidia proprietary Graphics driver it boot up on a blank screen (I can hear the login sounds, etc) but screen is absolutely black.
I try to login in recovery mode and check if something is wrong but nothing happens (even adding noveau driver to a blacklist (editing grub)) Now I have re installed Ubuntu 10.04.1 and works fine but I would like to install the 10.10 version, since I have this inconvenience, I cant do it.
My graphic card: Nvidia Gforce 8400GS 256MB Pci Express
since installing nVidia graphic drivers I can't adjust volume using volume button nor using volume keys. The volume icon has 3 horizontal lines like Ubuntu couldn't find audio device. Morover when I try to run pulseaudio there is "/home/chris is not ours" message.
Despite these facts audio is playing and I can adjust volume using alsamixer, but it is extremely not comfortable to enter console each time I want to volume up/down..
Thought I'd put this together based on what I just did as it's hard to find a place where you get complete info in one place for this topic.
Not taking any credit as it's just piecing together stuff found on the net.
Of course this is for my specific hardware and system so YMMV: - Palit Sonic GT 240 card - Lucid 10.04.1 64-bit - Intel DG33FB board and E7200 CPU - LG monitor L194WT at 1440x900 res
Reason for choosing the latest NVidia drivers instead of the ones available from the System > Administration > Hardware Drivers option is that the latest ones contain specific fixes for my card, that are not available in the others.
Prerequisites:
All of the following is based on a freshly installed 64-bit Lucid 10.04.1 system. Some actions may need modification if you have already been tinkering with Nvidia drivers.
1. Backup your /etc/X11/xorg.conf file if any. The default clean install of 64-bit Lucid 10.04.1 doesn't create this file so unless you have generated and modified the xorg.conf file for your specific needs, skip this.
2. Install the following packages
Code:
If this doesn't work, run
Code:
And paste the output of that in the command above so you get, say
Code:
3. Remove the following packages using Synaptic's 'Completely Remove' option - nvidia-173-modaliases - nvidia-96-modaliases - nvidia-current-modaliases - nvidia-common
4. Create a new text file disable-nouveau.conf in the directory /etc/modprobe.d/ with the following contents
Code:
5. Download the latest NVidia drivers applicable to your card from here:[url]
6. Save the downloaded file (e.g. NVIDIA-Linux-x86_64-260.19.29.run in my case) to an easily accessible location like your home folder. Make this file executable by running, say
Code:
7. Check that the driver was correctly downloaded.
Code:
8. Run Update Manager, Check for updates and Apply any found
Installation:
1. Restart and choose the recovery option from the Grub options list.
2. Choose the Root Shell option in the list of options presented subsequently.
3. At the root shell run the following
Code:
If you skip this, the driver installer will inform you of the need to do this.
4. This will present you with a login prompt. Login with your admin username and password.
5. Navigate to the folder where the driver installer is present and run it, like
Code:
6. Accept the license text.
7. Say Yes to installing the 32-bit Open GL drivers.
8. I think you need to say Yes/ Accept once more time to initiate the driver installation.
9. Once the driver is installed it will ask you whether it should configure xorg.conf for you, say Yes. This will create the xorg.conf file if not present in your system and modify an existing one if present.
10. Back at the prompt, shutdown the system
Code:
11. Restart and use the normal startup option in the Grub options list, if all goes well you should see your beautiful desktop.
I know there are a lot of threads out there for same or similar issues, but nothing I found was working for me until, by sheer chance, I found this very simple solution on the Fedora forums. Too elegant not to share.Environment:Ubuntu 10.10nVidia GeForce 5500Samsung SyncMaster 225BWUsing DVI cable (in case it matters)Issue:After installing the proprietary nVidia drivers, the screen resolution was no longer the correct native resolution of the display. In my case specifically, the nVidia X Server Settings utility was detecting the maximum supported screen resolution was 1280x1024 while my display's native resolution is 1680x1050.Solution:Open a Terminal window.Make a backup copy of the original xorg.conf file. This is just good form any time you are making config file customizations.
Code: sudo cp -p /etc/X11/xorg.conf /etc/X11/xorg.conf_backup Open 'xorg.conf' in a text editor.
I want to install NVIDIA drivers on my Debian Squeeze so that I can use parallel computing packages like CUDA C or OpenCL for my Master Thesis. I have NVIDIA Geforce 310M.
I found a link in wiki.debian which gives me two ways to install NVIDIA drivers and I want to install the NVIDIA way (non-debian way).I have to stop 'X' and I stopped it by typing 'service gdm3 stop' and then I went to ''init 3'' . Now I want run
'sh /home/swaroop/Downloads/NVIDIA-Linux-x86-270-41.06.run' but its not working.
I just installed debian (Jessie) in my computer and tried to install Nvidia drivers. This is a task i have done many times and never got a problem but today...
Here you have my output...
X.Org X Server 1.16.2.901 (1.16.3 RC 1) Release Date: 2014-12-09 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian Current Operating System: Linux PC-Server 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ck
I'm new to Debian and installed it with Cinnamon because I want to learn some OpenCL programming in Linux. I have a Nvidia GT 525M GPU. Once the operating system is installed, I followed [URL] ..... article to install the proprietary Nvidia drivers. As the forum suggested, instead of creating an Xorg server configuration file, I installed Bumblebee according to [URL]..... article.
But when I restarted my machine after completing all the steps when I try to log in I get the follwoing message:
I need to install wheezy nvidia-graphics-drivers because my video card (geforce GT 425m) isnt supported on the squeezy version. I downloaded the wheezy source code and built it on my squeezy system, some .deb files where created, the problem is I dont know which of those to install, these are the files:
I'm running 64-bit Debian lenny, and am trying to run a 32-bit program that requires libGLEW. I've installed libGLEW using apt-get install libglew1.5, but when I try to run the program I get the error: error while loading shared libraries: libGLEW.so.1.5: wrong ELF class: ELFCLASS64
It seems the default install of libGLEW is in 64-bit mode, and the program can't use the 64-bit libraries. It looks like I need to install libGLEW in 32-bit mode, but I've no idea how to do that.
I am new to debian, But I was using ubuntu previously. Now I have installed debian Lenny and I want to install the VLC player, When I try the below command nothing happens.Do I need to add any repository?
The following actions will resolve these dependencies:
Keep the following packages at their current version:
I am running Debian "Sid" and cannot install the Nvidia driver. When I try to install the driver using Module Assistant it says "Bad luck, the kernel headers for the target kernel version could not be found and you did not specify other valid kernel headers to use." It also says "If the running kernel has been shipped with Debian please install the package linux-headers-2.6.32-trunk-amd64." The kernel I am running is the one currently in Debian "Sid".
I run the 2.6.32-5-686 kernel on Squeeze and the bad nvidia drivers. A recent update, and pardon for not noting which, broke 3d games on my box.
From a terminal neverputt yields the following error:
ignatius@lapbox 14:56 [ ~ ]:$ neverputt X Error of failed request: BadWindow (invalid Window parameter) Major opcode of failed request: 137 (NV-GLX) Minor opcode of failed request: 4 () Resource id in failed request: 0x2600013
[Code].....
I can mv xorg.conf to xorg.conf-pre and nexuiz will fire-up. Without 3d of course. I spent an hour or so last week going over my xorg.conf but it just ain't broke!
Someone else saw it, too, and reported it but his post remains alone in the thread as of 10 minutes ago. Anyone else seen this?
I don't play games much at all, but sometimes I just wanna frag muthafuckas and now I can't.
I'm having all sorts of problems after doing my first update (#1. safe-upgrade, #2. full-upgrade) in over a month.
Anything from no Nvidia linux-headers being found to any VT not working. After completely removing all of the previously tried Nvidia presence on my PC, is there a safe way for me to install the non-free drivers?
It seems that I'm learning a bit about Debian in the last couple of days...
Here's the thing. I don't appear to be getting any 3D accelaration from my video card at the moment.
Having tried many things (which all failed) and making a mess of my computer I have done the following things:
1. Reinstalled Lenny from scratch.
2. Updated sources to point to stable and allowed update manager to do its thing.
I now appear to have a working build of squeeze.
X is up and running fine, but when I check /var/log/xorg it appears that I'm running the NOUVEAU driver, which does not support the 3D functionality of the card.
So... What is the best method for getting the appropriate driver installed?
My last attempt ended up with nvidia-glx fighting with xorg, so I'm hoping that someone will have up to date instructions that I can follow...
My problem is that I am trying to install nvidia drivers I got integrated card nvidia geforce 6100 nforce and amd x2x64 processor and also squeeze x64, so I downloaded the driver but when I try to top gnome I cant /etc/init.d/gdm stop it says no such file or directory So I google it and I found that squeeze has genome 3 so I put: /etc/init.d/gdm3 stop and it just appears a black screen just with a prompt but without any shell, I cant sign in debian or do anything it is just a black screen and i try ctrl+alt+f1, f12, f8, space and nothing, I can write but it doesn't response the only thing that I can do is press ctrl+alt+dell and it restart the PC. How can I stop gnome to install my drivers?
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
I tried to install drivers for my GeForce GT 630M graphic card. At first, I just installed nvidia-detect and there was a suggestion to install nvidia-driver:
When I had a wubi install(after I restarted, logged in, etc.) a little icon appeared in the top right-hand corner of the screen informing me of an nvidia driver update, which was required to run compiz desktop effects. Now I have ubuntu installed on an actual hard drive(wubi was deleted beforehand) and I get no such icon. So I'm wondering how to update my drivers. BTW I have a 9500GT
Three times so far I have had to re-install ubuntu because I installed an updated or new Nvidia graphics driver for my GeForce FX 5200 The first time, using Natty Narwhal, I installed an updated graphics driver, and upon reboot, I was presented with a blank screen that did nothing. Being a first-time Ubuntu user, I assumed it was me, or a bug in the new release. So I burnt a Lucid Lynx cd on another pc, and installed that instead. Same problem when I installed a new graphics driver, again via Admin>>Hardware Drivers. Reboot yielded a blank screen. Booted from cd again, as I had no files yet to worry about, and everything seemed to be fine, providing I stayed away from that tempting hardware drivers button.
I then accidentally installed a new driver when installing the dependencies(via terminal) for OGRE (Object-Oriented Graphics Rendering Engine) This time, my terminal froze, Firefox wouldn't boot, and a reboot yielded a blinking, blank login screen that did not do anything. Obviously, I'd like to have a graphics driver, as currently I can't run anything that needs 3d acceleration (Games, 3d simulations, even Desktop effects), but it's not absolutely necessary. So if nobody can suggest a fix, short of a new computer, new graphics card etc, can anybody suggest a way that I can stop myself accidentally installing anything driver-ish? The driver worked fine on windowsXP, but there's two reasons I'm not going back to that: a) I hate it. Hate, hate, hate.b) I've lost the activation key that came with computer, so I can't reinstall.
Further detail can be provided on request. Computer is Dell Dimension 2400, 256Mb RAM, Hard drive is almost empty. Old and slow, but I like it.
I got fedora 12 like 2 weeks ago. I am newb in using linux. I got enough of the problems windows 7 has and thought to change on something good and free . It seems OK but i want to try play some online games on fedora. Seemed it did not have video card drivers installed and tried to install them. Once i installed some kind of video drivers using a yum command i found on web. But i think something was wrong because when i tried the first game installed with wine it worked as if i didn't have video card . Even yahoo messenger works very bad as if i won't have video drivers. I remember at the middle of that installation it shown kind of error like it did not find something.i don't remember exactly what it shown because immediately after that it continued to install video card drivers. But after i tried that game it still seemed something wrong happened. So....how can i see what video drivers i have installed ? Do i need to uninstall them before trying again? I got a CD with drivers when i got my notebook do you think those will work if i install them using wine ?
I installed OpenSuse Gnome version 64 bit on a HP laptop DV7 Intel Dual Core with nVidia 9600 GM cardAll went well, until after I had installed the nVidia drivers from this page: NVIDIA drivers - openSUSEI selected the Geforce 1-click install and Yast went on to installl all the packages (a lot of 32-bit),took about half an hour.I logged out/in, and could work as normal, until I rebooted. Maybe I waited not long enough (5 minutes), but the screen was blank, then I gave up.Anyone has an explanation. I can always re-install everything, but then what went wrong with the nVidia package
I can install the nvidia driver for my card easily with yast but would like to try using nvidia's own installer. There is a paths problem. I've spent some time looking at 11.4 kernel build paths and they seem to be circular so the installer will not find what it needs. The installers help in this respect is as follows.
Code: --kernel-source-path=KERNEL-SOURCE-PATH The directory containing the kernel source files that should be used when compiling the NVIDIA kernel module. When not specified, the installer will use '/lib/modules/`uname -r`/build', if that directory exists. Otherwise, it will use '/usr/src/linux'. Obviously it will fail on the build directory and fall back to usr/............ where linux is a symbolic link linux -> linux-2.6.37.1-1.2
which must be the one in the same directory but it fails to find either type of auto conf file From this I assumed that it just needed pointing at the correct build directory but this turns out to be symbolic link
However when pointed here it still doesn't find what it needs and falls over looking for the kernel header this time. I thought that the idea of the /usr/src/linux link was to standardise kernel building but if suse use it for something else or nvidia make the wrong assumptions just where should the installer be pointed?
I am having a challenge to install drivers on this machine with the OS and graphics card stated in the subject. To date I have tried different ways and they are broken in the steps or in the results I get on my machine. The how-to written by ajohnw Installing an nvidia driver - easiest I have found to date. results in a file or directory not found when I try to execute
Code:
/etc/bin/nvidia-xconfig
The article SDB:NVIDIA the hard way results in the following error (copied from the error log):
Code:
ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist.The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured.
Researching how to resolve that error and I can't find anything relevant to openSUSE 11, closest version being openSUSE 9.Lastly, I've tried this SDB:NVIDIA drivers and for some reason it does not generate the xorg.conf file. At least that's what I am concluding. I go through the steps, reboot the system and boot only to a command prompt. Navigating to /etc/X11/ there is no xorg.conf and I have to copy xorg.conf.install to xorg.conf to get back into the Desktop.
