Ubuntu Multimedia :: Mplayer: Error Opening Video_out (-vo) Device
Jan 13, 2010I get that error when trying to open an .flv or .avi file. Anyway to fix it? Here is the output of gui.conf
[Code]...
ADVERTISEMENT
Ubuntu :: Error Opening/initializing The Selected Video_out (-vo) Device?
Jan 8, 2010When I attempt to play a store-bought dvd using mplayer I get the following error: Error opening/initializing the selected video_out (-vo) device. I found that some folks were editing their .mplayer/gui.conf file to read vo_driver = "x11" and were having success with it. The link to that thread is here : Error opening/initializing the selected video_out (-vo) device. [Archive] - Ubuntu Forums my .mplayer/gui.conf file reads vo_driver="xmga" changing xmga to x11 doesn't . I'm running 64bit Karmic.
View 5 Replies View RelatedGeneral :: Error Opening/initializing The Selected Video_out (vo) Device
Nov 3, 2010while opening any video with gmplayer it gives the fatal Error opening/initializing the selected video_out (vo) device. while playing with mplayer it doesnot goto full screen video output mode while pressing F.
View 13 Replies View RelatedDebian Multimedia :: Audacity Playback / "Error While Opening Sound Device"?
Apr 15, 2010When I try to playback a sound file in aucadity just after having played one in rhythmbox or totem or vlc (or presumably any other media player), I get the following message :
"Error while opening sound device. Please check the output device settings and the project sample rate."
When I try again 2 or 3 seconds later, playback works fine. In fact if I wait 2 or 3 seconds after having stopped playback in rhythmbox or totem before starting playback in audacity, audacity doesn't give me the error message at all. Just wondering what causes this delay (as there are no delays when I go from rhythmbox to totem or vlc or anything else).
Slackware :: Error Initializing -vo Device In Mplayer
Jul 12, 2010I have installed slackware 13.1 on my friends laptop. Its an msi laptop . dual core 2ghz, 1gb ram nividia 9000 series.etc. everything is fine but after installing mplayer codecs from slackbuild and also xvidcore, i am not able to play avi files in mplayer. It is giving me a fatal error saying. error initializing -vo device. i tried to change the video driver. it was by default xv then i tried X11(xvid) then open gl and open gl with max textures . when i made it to open gl with max textures the video out came but it is lagging with the audio.
View 2 Replies View RelatedUbuntu Multimedia :: Mplayer Fails To Use VDPAU Device?
May 23, 2010I have a Zotac IONITX-F-E motherboard (Intel Atom Dual Core 1.6 GHz + Nvidia ION) -based box with Ubuntu 10.04 64-bit installed. My goal is to play back 1080p video.
I have mplayer installed (which I compiled from source with --enable-vdpau). I try to run mplayer with this command:
Code:
mplayer -vo vdpau -vc ffh264vdpau path/to/myfile.mkv
I get the following message in my terminal:
Code:
Error opening/initializing the selected video_out (-vo) device.
I have libvdpau-dev and libvdpau1 installed.
[Code]....
Before doing all this, I was able to get the nvidia 195.36.24 driver installed, but I am still having some trouble, which may or may not be related.
Fedora :: Firefox Not Opening Mplayer Fc11?
Dec 30, 2009i used to be able to watch music videos from a local radio station website using firefox and mplayer with fc11. maybe the solution is to upgrade to fc12, since it seems to work fine on the pc with fc12, but maybe the problem is something easy to fix, and i can wait awhile before getting everything up on fc12.. -( also, with fc11, i can play the same videos using a newly installed version of google chrome. i am just trying to find out what causes this type of error and how i can fix it. if i go to www.kzsn.com and select the "on demand" tab, then select a video, i should see mplayer open up and the video play - i don't get the black box and no video, no sound.. as stated above, this works fine using google chrome, or using another pc with fc12. this website also has some videos that play via flashplayer. they also did not play in fc11 with firefox, but i was recently able to get them to work by downgrading to a previous version of shockwave (found that in another post). not sure if this has anything to do with the problem i am having, but thought i would mention it, just in case.. only other thing i can't seem to do with any release of fc (maybe linux in general) is watch movie trailers from the apple website (which used to work fine) - was wondering if anyone else can with fc11 or fc12?
View 14 Replies View RelatedUbuntu :: MPlayer Opening When Choosing To Open Folders In Places?
Oct 27, 2010I have the problem that when I want to open a folder in Places, mplayer opens and tells me that it cannot open that particular folder. The only place where this does not happen is when I click on the "Computer" folder.Can someone please help me out with this problem? I found all sorts of forums but seeing that I am not really a computer genius;
View 5 Replies View RelatedDebian Multimedia :: Error: /usr/bin/mplayer: Symbol Codec_wav_tags
Jun 18, 2010To make a long story short:./usr/bin/mplayer: relocation error: /usr/bin/mplayer: symbol codec_wav_tags, version LIBAVFORMAT_52 not defined in file libavformat.so.52 with link time reference
Debian-unstable. I tried to play some avi files with smplayer. I got an error message and searched the fscking web: http://www.mail-archive.com/pkg-multime ... 02393.html
[Code]...
OpenSUSE Multimedia :: Error Is:"Mplayer Has Finished Unexpectedly?
May 25, 2011I have observed a recurring problem with video files. Very often the error stated below occurs when I try to play few files, but not when playing few other videos.The error is:"Mplayer has finished unexpedtedly. Exit code: 1"How can i get rid of this recurring error.
View 9 Replies View RelatedUbuntu :: Automount Without Opening The Device?
Oct 17, 2010I have kubuntu 10.10 when i insert a pen drive, i cannot navigate in the dirs from a shell, but i have to open dolphin before and then i have to click on the /media/$newdir and then i can navigate... is there a way to automount without opening dolphin?
View 2 Replies View RelatedUbuntu :: Jajuk Not Opening The Configure Device
Jan 31, 2011I tried to find an answer through searching the web and this forum, but there doesn't seem to be anyone who encountered this problem: I installed jajuk on ubuntu and it is working just great, apart from the fact that I can't get to the 'Configure device' window.Tried it through the Configuration Perspective (Devices View), there rightclicking on the icon of my device and selecting 'configure device', but nothing happens. I tried the same in the Files Perspective, where you can also get the right-click menu to select 'configure device' from. But to no avail.
Is this problem known, or does anybody know a workaround?(for example: also the 'New device' button in Devices View doesn't work, but I can work around it by using the Device Wizard) It seems to be a ubuntu/linux specific problem, as on my Mac, jajuk works fine.
Hardware :: Webcam 'dummy' Device Can Only Be Read By Mplayer
Aug 13, 2009I'm playing a little bit with OpenCV but the webcam that i have on my desktop isn't app-friendly... so i could not get it working with OpenCV, it's a 0ac8:301b Z-Star Microelectronics Corp. ZC0301 WebCam and it worked out of the box with Cheese and after a little bit of tweak i get it working with camorama also.But some apps, like Skype and OpenCV demos doesn't work, believe me, i tried everything to get it working, i tried even upgrading to a very new kernel.
So i had the idea to create a "virtual" video device and using some app that can read the wcam i could print the wcam's output on such device, which should be compatible and app-friendly, so i would use that device always.
General :: Mplayer -tv Device=/dev/video0 Tv:// -dumpfile File2300.avi - Not Working
Aug 7, 2010Mencoder has not a support for my webcam.
However "
Quote:
" works flawlessly well.
So option dumpfile in man page is there to help us!
But well the command
Quote:
results in a 0kylobytes files.
How to force mplayer to dump file -tv flow data to file?
Server :: Lifekeeper Error - DEVICE FAILURE On SCSI Device - /dev/add
Sep 17, 2009Since May 12,2009. Our system lifekeeper has the error log "lifekeeper error: DEVICE FAILURE on SCSI device '/dev/add'", but it ran normally. Until last week, it failover to the standby server. The disk still running, the error still come out.
View 3 Replies View RelatedUbuntu Multimedia :: Unable To Open Device /dev/dsp - Device Or Resource Busy
Apr 13, 2010All my music editing software programs say, "unable to open device /dev/dsp.Device or resource busy." How can I fix this?
View 3 Replies View RelatedUbuntu :: Mplayer Error Since Last System Update?
Aug 11, 2010Since my last system update yeasterday afternoon mplayer returns an error. Another system which I have yet to run the update on is still fine. Both systems are Ubuntu 10.04 Lucid Lynx.
The error is:
Code:
mplayer: relocation error: mplayer: symbol codec_wav_tags, version LIBAVFORMAT_52 not defined in file libavformat.so.52 with link time reference.
Ubuntu Multimedia :: Mplayer Will Not Run?
Jan 27, 2010I'm having a problem running Mplayer in Ubuntu 9.1. I've installed and uninstalled several times. Mplayer refuses to open from the applications menu.n I attempt to open from terminal it comes up with the following: mplayer: error while loading shared libraries: /usr/lib/i686/cmov/libavcodec.so.52: file too short I've also tried other players such as Gnome Mplayer to play the video and it plays really fast with no audio or video. This has really been the only problem i've run into since switching from windows to linux two weeks ago.
View 3 Replies View RelatedUbuntu Multimedia :: Where Is Mplayer Gui On 11.04
May 25, 2011I've installed both mplayer and mplayer-gui packages, but I cannot find and launch mplayer with graphical interface. I want the classic mplayer's gui and seems that isn't there after installed. Doesn't appear ind applications on launcher and when I'm trying to run from terminal the mplayer-gui command I get the error:command not found. So, where is mplayer-gui and how to get it back. This problem doesn't exist in any previous ubuntu version.
View 3 Replies View RelatedDebian Multimedia :: Compile Mplayer Like In Multimedia?
Mar 22, 2011I'm currently using Debian Testing with Debian Multimedia Sid repos. The current Mplayer (3:1.0~rc4+svn20110308-0.0) seems to be broken - I can't encode AAC to AC3 on-the-fly anymore. I'd like to compile the latest snapshot or SVN version, but what is the easiest way to compile it with the same options as the one in debian-multimedia.org?
View 3 Replies View RelatedUbuntu :: MPlayer - An Error Occurred - Could Not Read From Source
Oct 15, 2010My system is playing CD's fine but I just tried a DVD (non-BluRay) and I get that error! I have googled about and though I already had the ubuntu-restricted-packages I didn't have all the gstreamer0.10plugins-bad installed (as seems to be the recommended fix). I now have them and MoviePlayer still gives the same error. I also want BluRay's to be playable and I was investigating that when I thought I would check whether normal DVD's were still working (I'm not sure whether I've tried a DVD since I upgraded to MM). The DVD mounts ok and appears on my desktop with the title.
View 5 Replies View RelatedUbuntu :: Error While Playing A Movie / Avi / Mp4 In Gnome Mplayer
Mar 12, 2011I am running 10.10 ubuntu 64 and I have been using gnome mplayer from the USC for quite some time.
View 4 Replies View RelatedRed Hat / Fedora :: MPlayer Error After Installing Thru Yum
Oct 2, 2009Every time I tried playing a WMV file, it gave me this error Code: cannot find codec matching selected -vo and video format 0x3253534D.
View 2 Replies View RelatedRed Hat / Fedora :: Error When Installing MPlayer ?
Apr 29, 2011I've been trying to install mplayer on my rhel 6.0 but its giving me the following error:
Error: The GUI requires libavcodec with PNG support (needs zlib).
Tell me the exact name of the package that contains libavcodec with PNG support/zlib? I tried {yum install libavcodec} and {yum install zlib} respectively but it returns "no package available, nothing to do".
Software :: Error In Install Mplayer ?
Feb 26, 2009I have a source of mplayer and during install it fedora 10 in make level.
I have 2 error.
Software :: Error When Installing MPlayer On My Red Hat
Apr 29, 2011I've been trying to install mplayer on my rhel 6.0 but its giving me the following error:
Error:
Tell me the exact name of the package that contains libavcodec with PNG support/zlib? I tried {yum install libavcodec} and {yum install zlib} respectively but it returns "no package available, nothing to do".
Ubuntu Multimedia :: Using VDPAU With MPlayer And VLC?
Jan 23, 2010I am trying to take advantage of VDPAU for playing video files with my ASRock ION 330. As far as I know, MPlayer and VLC both include VDPAU support. Ok then, I managed to make MPlayer work from the command line:
mplayer -vo vdpau -vc ffh264vdpau ./filename.mkv
In this way it plays a 720p content smoothly, with under 10% CPU use. Great!The problem is when I try to make this permanent, i.e., configuring the files ~/.mplayer/config and ~/.mplayer/gui.conf.This is what I have in there:
config
======
vo=vdpau,xv,
vc=ffh264vdpau,ffmpeg12vdpau,
[code]....
But still, when I open MPlayer from the menu, no matter what file I try to open it gives this ugly message:Error opening/initializing the selected video_out (-vo) device. With regard to VLC, I had no luck, although I am using the latest "1.0.3 Goldeneye" version, I don't know how to make use of VDPAU.
Ubuntu Multimedia :: Mplayer Won't Play DVD's
Nov 17, 2010Running Lucid Lynx. VLC works fine but Xvmc output uses less CPU on my PIII 750 laptop and isn't supported by VLC. I installed Mplayer but I can't play anything from the Mplayer GUI. I get the message "FATAL: Could not initialize video filters (-vf) or video output (-vo)". The interface is all black so I can't see the controls. I installed Gnome Mplayer GUI and now I have different problems. Playing video files, including VOB files from a DVD works fine. Trying to play a DVD with or without menues does not. I followed the instructions at URL.... What could be wrong?
View 3 Replies View RelatedUbuntu Multimedia :: No Sound In Mplayer?
Nov 22, 2010So I'm running Ubuntu 10.10 64-bit on an HP Mini 210-1190NR. Everything runs fine except mplayer. I installed mplayer from the repos but when I try to play a video I get no sound. I can't figure out why.
Here's the output:
Code:
mplayer star.wars.the.clone.wars.s03e10.720p.hdtv.x264-ctu.mkv
MPlayer SVN-r32636-4.4.5 (C) 2000-2010 MPlayer Team
160 audio & 350 video codecs
Playing star.wars.the.clone.wars.s03e10.720p.hdtv.x264-ctu.mkv.
Cache fill: 3.12% (262144 bytes)
[Code]...
Ubuntu Multimedia :: Mplayer Wants To Use Proxy
Nov 27, 2010I'm trying to use mplayer to stream some content from the net to my desktop. This worked fine the first time I did it (though failed dismally on all subsequent occasions. Now, the first umpteen times, I was behind a proxy. Now I am not behind a proxy, but mplayer still looks for the proxy settings. Why? I have changed the proxty settings in the network proxy (applied globally), in Firefox and every where else I can think of. I use the following command:
Code:
mplayer -dumpstream -dumpfile ~/Desktop/<desired_filename>.avi http://<source>.avi
and I'm told in response
Code:
Resolving www<proxy> for AF_INET6...
What gives? Why is mplayer trying to use a proxy, and how can I tell it not to?