Ubuntu Multimedia :: Joining .rmvb Files Together?
Aug 30, 2010I need a piece of software that could join .rmvb files together as one file , i have tried Avidemux and Lives , but none of them worked
View 5 Replies
ADVERTISEMENT
OpenSUSE Multimedia :: Mp3 & Rmvb Files Played Too Fast?
Jan 15, 2010mp3 file is about 30 minutes but it runs up in 2 seconds and .rmvb file is about 60 minuts but runs up in 5 seconds.
I tried different mp3 files, tried different players including Amorak, DragonPlayer and Kaffeine. Didn't try other types of multimedia files though.
The fact that flashes work well on Firefox may prove that sound card is all right.
OpenSUSE Multimedia :: .rmvb Files Not Playing Well On Kaffeine?
Sep 25, 2010but after a forum search I only found one similar thread, but seemingly the issue was not totally solved. I just would like to suggest a solution (well, most likely a workaround) for .rmvb Real Player movies which don't work well on Kaffeine, without need to install other players or applications.I first saw many people had similar problems as me: Real Player movies just played sound but not video, or viceversa. I first tried installing w32 codecs, but this seems to be the good solution for 32 bit users, I use 11.3 x64 and didn't work for me. After some Google search I came to this page:Index of /pool/non-free/w/w64codecs/
Seems to be a Medibuntu repository, and I looked for a .tar file, since I was looking for a "w64" version of the codecs. I downloaded the latest .tar.gz file found on the page, the 20071007 one and uncompressed it. It has some codec files and a Readme which tells where to put the files. After that done, without rebooting Suse, I tried again to play the movie, and Kaffeine finally played it well, although now it pops a message saying Kaffeine closed unproperly whenever I close it after having played a .rmvb movie. I think that can be solved by updating Kaffeine, but haven't tried that yet
OpenSUSE Multimedia :: Kaffeine Can't Play Rmvb Files
Apr 20, 2011I tried playing some rmvb videos. I can hear the audio but there is no audio. I followed a few theads related to this but it still hasn't fixed my problem.
One thread says all related packages must be from packman. I have this currently
Code:
mvalviar@mac-mac:~/Desktop> rpm -q kaffeine libxine1 libffmpeg0 w32codec-all xvid libquicktime0
kaffeine-1.2.2-1.pm.1.1.x86_64
libxine1-1.1.19-2.pm.45.33.x86_64
[Code].....
OpenSUSE Multimedia :: 11.2 KDE - No Proper Video Playback (RMVB Files)
Jun 20, 2010I just installed openSuse 11.2 KDE in a laptop and a desktop. On the laptop, SMPlayer worked very well with "rmvb" files. On the desktop, video its shown with no audio; using Kaffeine, both are played (sound and video) but are a bit out of sync (it happens in both, the laptop and desktop).
View 2 Replies View RelatedUbuntu Multimedia :: Software For Splitting And Joining Mp3 Files?
Jan 23, 2011What is the best software for splitting and joining mp3 files?
View 7 Replies View RelatedOpenSUSE Multimedia :: Joining A Series Of Vidio/audio Files?
Oct 30, 2010I am trying to join about 3 video file and have an audio track over the top. Nothing major and to give you an idea how basic it needs to be, I used windows movie maker in the past. I can't figure out how to do it! I had a flick through the web and some people recommended Avidmux. I installed it and i can edit one video file with no audio but if i try to incorporate a second file it just opens a new window! Has anyone got any ideas on good video editing software.
View 3 Replies View RelatedUbuntu Multimedia :: Rmvb Video Converter Crashes While Converting
Jul 25, 2010I'm just wondering if anyone knows of a rmvb video converter that works with ubuntu. There is a windows rmvb converter, but when I try to use it through wine it either crashes while converting or just doesn't work period.
View 1 Replies View RelatedUbuntu :: Joining A Bunch Of Avi Files That Are In A Set Sequence
Jul 27, 2011How to join about 8 avi files the filenames are in the format "blah.avi.001", blah.avi.002, blah.avi,003 blah.avi.004 etc. I want them joined so there is just one avi file. How can I do this?
View 9 Replies View RelatedFedora :: Multimedia Player For RMVB Movies Playback?
Feb 24, 2011Is there a multimedia player that can play downloaded *.rmvb movies?
View 1 Replies View RelatedSlackware :: Gs Segfault When Joining Pdf Files?
Dec 28, 2010I usually use the following command to join several PDF files in one :gs -dBATCH -dNOPAUSE -q -sDEVICE=pdfwrite -sOutputFile=output.pdf input1.pdf input2.pdfHadn't have to do it for a while but today, I needed it and thus fired my script.lam! gs segfaults.A quick internet search and I found this :https://bugs.archlinux.org/task/22006Though Arch related, while I'm running slackware64-current, the behaviour was exactly the same as mine.In the above thread, one guy linked to a bug report which seems to be theculprit :http://bugs.ghostscript.com/show_bug.cgi?id=691831gcc 4.5.1, gs 9.00, x86_64, indeed, slackware64 seems to be exactly in that situation.
View 2 Replies View RelatedUbuntu :: Joining Relevant MP3 Files Based On Paths?
Oct 24, 2010I have a bunch of MP3 files and I have their paths grouped in a text file. Is it possible to join the relevant MP3 files based on the paths in the text file losslessly?
View 2 Replies View RelatedGeneral :: Joining Two Files From The Command Line?
Oct 21, 2010I'm looking for a solution for the following simple problem. I have two files, fileA and fileB. Each file contains only one word per line, and they contain exactly the same number of lines. I would like to create a new file called fileAB, where the i-th line contains the i-th line of fileA, a Tab separator character, and then the i-th line of fileB. I know how to do it in Python or other scripting languages, but it would be nice to have a bash one-liner for that. Is it possible to do this in bash or any other Unix shell, using the tools that are usually available on the command line (e.g., sed, awk and such)?
View 1 Replies View RelatedFedora :: How To Play Avi, Rmvb, Flv, Mkv
Nov 5, 2010I've just install F14. It's looking great until I want to play movie. I click on the movie this message come out:movie player require an additional to decode this file;the following plugin is required;realmedia demuxer;do you want to seacrh for it now;i click search - then this message come out;failed to search for plugin; bla bla blathis never happen with ubuntu.
View 2 Replies View RelatedFedora :: Can't Reproduce .rmvb With Totem - F13
May 2, 2010I installed F13 beta yesterday, added RPMFusion's repos, updated and everything seemed ok, when the time came to add mp3 and video support I did the same as on F11, simply tried playing some mp3 and a rmvb video and after being asked to install missing codecs everything would work but! it didn't work for video, although it installed a bunch of files the rmvb video still won't play.
For now I installed mplayer and I can watch my videos alright, I also remember that on another opportunity the same happened to me and after a couple of updates the problem was fixed so no biggies but maybe someone can give me some advice on what to try to fix this? like remove a certain package and try reinstalling it.
General :: Convert AVI Or Rmvb To DVD Format?
Apr 18, 2010how can convert AVI and Rmvb format to DVD and burn it into DVD Disc? I have Obuntu ver9.?
View 3 Replies View RelatedFedora :: VLC Unable To Play RMVB Anymore
May 17, 2011My vlc can't play *.rmvb any more. After I opened a rmvb file, it just saying buffering without play the movie, then nothing happened.
View 1 Replies View RelatedGeneral :: Joining An Ubuntu VM To Microsoft AD And DNS
Oct 27, 2010So here's what I'm after:
Create Ubuntu inside Virtualbox (done) Join it to the domain using net ads join -S example.com -u admin (done) Update the DNS using net ads dns register (done) Be able to visit the netbios name as defined in smb.conf (lets call it Bob). [Not done]
The problem I am having is that it looks like, even though the machine is now on the AD, and I can browse users in the AD, etc... My network configuration (IP/route tables, etc) are not correct.
For example, my AD server is in the 172 IP range, while BOB is sitting at 10.0.2.15.
The DNS server stores Bob's value as 10.0.2.15, so when I ping it from my workstation at 172, I end up getting no response (obviously it's on a different net).
Bob's route table is configured to deal with 10... range of IP, rather than 172.
I have attempted doing commands such as ifconfig eht0 172.16.1.118 netmask 255.255.255.0 and even editing the route tables, but that then makes outbound network traffic imposable.
Ubuntu Networking :: Joining Windows Domain?
Apr 22, 2010I want to join a Windows domain with my ubuntu (for project of evening school)I'm following this guide http://ict-freak.nl/2008/10/26/how-t...indows-domain/ but when I put in the command I get this error
project@ubuntu:~$ sudo domainjoin-cli join project2010.be Administrator
Code:
Error: Unable to resolve DC name [code 0x00080026]Resolving 'project2010.be' failed. Check that the domain name is correctly entered. Also check that your DNS server is reachable, and that your system.is configured to use DNS in nsswitch.Probably need to Change the nsswitch file.it looks like this atm
Code:
# /etc/nsswitch.conf
#
# Example configuration of GNU Name Service Switch functionality.[code].....
Networking :: Joining Two Networks?
Apr 9, 2009I don't have any background in networking. Could someone tell me what are the possible options and the best solution to join two networks together?Let's say network A has the IP address of 192.168.1.0/24 and network B has the IP address of 10.0.0.0/24. Should each end of the network has a gateway server? Or should I just setup one enough? Or do we have alternate options?
View 1 Replies View RelatedProgramming :: Joining Command In Csh?
Feb 3, 2009I did a search for this but did not see anything relevant.I'm trying to join several strings and execute them as a command but csh does not seem to recognize it as a command, anyone know what I'm doing wrong? numone and numtwo will be passed into the script. (I have to use csh because it is a part of an existing script.)
Code:
#!/bin/csh
set file1=file.dat
[code]...
Ubuntu :: Samba Configured For Joining Domains - How To Login
Nov 1, 2010I have successfully deploy/configured the Ubuntu PDC and connected Windows XP too. Its all working fine.. but now I wana to connnect Ubuntu Desktop to same Ubuntu PDC. I have changes in SAMBA, as per required for joining Domain and execute the <net join MyDomain -u root> to its all fine. No error. But How to Login? On startup there is nothing like option for selecting Domain or Workgroup..
View 9 Replies View RelatedSoftware :: Joining Multicast IP Group?
Dec 14, 2009How can i make my device join a multicast IP group.My target device is in linux
View 2 Replies View RelatedSoftware :: Splitting And Joining In Both Windows?
Jan 20, 2011I have a file of size 6GB. I would like to find an utility which will split and join in both windows and in Linux. I know Linux has native split and cat for this purpose. My idea is, if I give this split files to anyone, they should be able to join them either in Windows or Linux. Is there any utility to do this job?
View 7 Replies View RelatedUbuntu :: Joining The Project Using SPHINX2 For Basic Voice Commands With USB Mic?
Jun 12, 2011How to compare two wav files [URL] or to be capable to reco simple voice commands? Openbox, fluxbox... can be ran using perlbox voice reco for basic commands. [URL] everything is frequence based:[URL] However we would like to make the use of the ALSA and processing after recording. OK.
Code:
apt-get install -f sphinx2
here is my script:
Code:
#!/bin/sh
# my alsa-1 is my usb mic
arecord -Dplughw:1,0 -f cd -vv voicecommand.wav
[code]....
THe next step is to analysis the wav file just created. The advantage is that sphinx2 works for basic commands + it uses only up to 3% of your CPU resources !
General :: Joining VM To Windows Network Dormain?
Jun 30, 2011I have created a linux vm on hyper-v and would like to put it on our network domain. The Hyper-V software is running on windows server 2008. I would appreciate it if you could please give me a step-by-step guide on how to make this possible or a reference where i can get information on how to do this.
View 1 Replies View RelatedGeneral :: Joining Two Commands In The .bashrc File?
Apr 15, 2011attending class in the Redhat Academy Website. I was wondering how can you join the two commands of cd/usr & ls successfully in the .bashrc file?
View 10 Replies View RelatedServer :: Joining Windows 7 Client To Samba PDC V 3.4.3
Jun 19, 2010I have a very nice SUSE 11.2 Samba PDC that runs well with Windows XP clients. I am using NETBIOS for name resolution since I dont want to put in a DNS server because my router already has one, Im pretty sure it would make things more complicated. I enabled wins support in smb.conf and made the name resolve order with lmhosts first. lmhosts lists all the ip adresses with their computer names in capitals. I hope thats right. I set up my windows 7 with the reg file from the samba wiki on windows 7 [URL].
That's great now I get the old screen from XP in windows 7 when joining the domain. I gave the machine netbios name MAINPC a smb trust account MAINPC and added the unix user MAINPC$ that should all work. I manage to successfully join it says welcome to domain, afterwards an error appears "changing the dns name of this computer to "" failed" and something bout not finding the domain controller. although I joined. then I resatart and when I try to log on it says "trust relationship failed". How to make it join and logon properly.
Server :: RHEL 5 / Bind - Joining Windows AD And DNS
Jan 13, 2010I have 6 RHEL 5 Servers, 1 5.2 32-bit Master Login Server, which services the other 5 RHEL 5.3 64-bit App Servers, for Login and Authentication. I am wanting to intigrate these with my Windows AD. I use Windows Server 2003 R2 Standard. I currently have the RHEL servers setup to have the 32-bit (5.2) server as the NIS Master, serving NIS out to the remaining 64-bit(5.3) servers.
I also have a Windows Server 2003 R2 Domain Controller serviceing my Windows AD. I would like to be able to ingrate them to be able to use Password Sync and Single Sign-on. I am not real worried about having Kerberos or LDAP running, because the systems are NOT physically connected to any external source. (The network is completely self-contained). I am just wanting to be able to use Password-Sync and DNS between the different networks.
My questions are as follows:
1) Would it be better/easier to make the Windows Server the NIS Master or the RHEL 5.2 Server?
2) If I make the Windows Server the NIS Master, how would that effect the remaing servers who get their NIS info from the Redhat Master?
3) If I keep the RHEL Master as NIS Master, how would I intigrate that with AD and have both shared Passwords and DNS?
Networking :: Joining Windows Workgroup And Samba Config?
Apr 13, 2010My interest to be able to join my windows workgroup and be able to work with the windows shares . I am running Fedora 12 in a virtual machine as guest OS. I know I have to install Samba which does not come installed in Fedora 12. Do I need to configure samba after installation if my only interest is to work on windows shares from Fedora and not the other way around? .
View 7 Replies View Related