I have a Gateway NV52 with an internal microphone and internal webcam. On Windows, both work fine, but on Ubuntu I can only get the webcam to work. I never used one on Ubuntu (using Karmic Koala 64 bit) before, so I may be overlooking something.
Code:
01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller
Here are some screenshots:
My Asus X52J Internal mic not working.. here is my asla informationCode:[URL]
View 9 Replies View RelatedI have been going crazy with this maybe someone can help me out. I realized that in 10.04 my internal mic on my Asus G51VX does not work.
I have already upgraded my ALSA Drivers using the latest 1.0.23, and in alsamixer it shows the iMic and Capture devices correctly, however in sound recorder and in Skype I get nothing but a low hissing sound. I believe this is a pulse audio problem and not ALSA since I didn't have a problem in Kubuntu 9.04 using ALSA which I had previously to this.
In sound config pulseaudio shows that there is only one input and one output device which I figure should read 2 input devices since there is also a mic jack on the laptop. Either way it is really annoying not to have use of the Mic.
Device is INTEL HD AUDIO ALC663
Simple mixer control 'i-Mic',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [off]
Front Right: Playback 31 [100%] [12.00dB] [off]
When I turn the i-Mic on I can hear the echo of myself coming out the internal speakers but it still won't record anything even with the Capture control on and at full volume.
I've got a Gateway CX2724. The sound works perfectly out of the speakers and headphones, but I can't get the internal mic to work for the life of me.
I asked around on other threads and tried a few modifications to /etc/modprobe.d/alsa-base.conf and none of these get the mic working when appended:
From the ALSA-Configuration instructions
Code:
options snd-hda-intel model=ref
Ideas taken from this thread
Code:
options snd-hda-intel probe_mask=1
Code:
options snd-hda-intel model=test enable-msi=1 probe-mask=1
This also doesn't work (modified from this thread.)
Code:
options snd-hda-intel model=ref probe_mask=1 position_fix=1
This also doesn't work (from "Extra Hints to get sound working.")
Code:
options snd-hda-intel model=laptop position_fix=1 enable=yes
When I use alsamixer to turn "mux" all the way up and have my headphones plugged into the microphone jack (don't have an external mic... ) in the front of the computer, I am able to record things but the volume is greatly muted. Perhaps the external jack is set to default for the microphone instead of using the internal mic?
I also have the output for alsa-info.sh if you want it - this was mentioned in the alsa configuration file (/usr/share/doc/alsa-base/driver/ALSA-Configuration.txt). Info about alsa-info.sh here.
i have just installed ubuntu on my dell inspiron 1525 and my internal/ built in webcam is not working. I've downloaded applications that use it like cheese and skype and it does not pick it up.
View 1 Replies View RelatedI have a HP Pavillion dv4 1313dx that has been running Ubuntu Lucid Lynx 10.04 wonderfully, but I am getting nothing out of the microphone.
I am a VERY beginning user (All I really know how to do in terminal is copy/paste, cd, ls, and, chown) and if I can fix this easily, I'd love it.
I already know to check the sound preferences, and nothing is picked up on the microphone, but I think it's there.
I've spent the last couple hours trying to figure out how to get my SoundBlaster XFi card working, but somehow in the process seem to have now also broken my on-board sound which when I first installed did work. I have no idea how as I hardly touched anything.Both cards are recognized in Sound preferences, sound is not muted there nor in Alsamixer. But neither produce any sound at all now.
Searching around the forums it seems that as of now my XFi should, kind of, work out of the box, but I've had no such luck.I'd really like any advice possible on getting my XFi with headphones to work in 10.04, but if this can't be done I'd atleast like to find a way to fully reset my sound setting so my on-board will work without having to wipe this partition and reinstall - there Must be an easier solution than that.
My Toshiba Satellite L305D is running Ubuntu 10.10. The internal microphone doesn't work - if I try to record something, I just hear some clicks. According to the terminal, my audio device is:
ATI Technologies Inc SBx00 Azalia (Intel HDA)
When I click open alsamixer, the boxes for Front Mic, Mic Boost and Beep are empty. When I go to Preferences => Sound => Hardware I get a choice of Analogue Stereo input, output and duplex - as well as off. I go for duplex. When I go to sound => input, the microphone mute box in unchecked and the single volume bar is at a maximum. There are no choices - the one choice, Internal Audio Analog Stereo, is checked. As it's only once choice, it can't be unchecked.
yesterday i was on videos, and i had headphones plugged into the headphone socket on my laptop.i unplugged them a few times because they were needed elsewhere, but on the last time i unplugged them, the sound didn't return to the internal speakers. i plugged the headphones back in, and there was sound out of the headphones, but not speakers. i rebooted the laptop, still to find sound only out of the headphones. i then was very bad, and booted into wingdoze, and still sound only out of the headphones.
i've tried doing the muting channels in alsa-mixer as well. muting didn't work. i've also tried cleaning the headphone socket with ispopropyl alcohol too. and removing the bios battery and battery and ac adaptor... just incase it will do a reset of some description. no. still nothing.
[code]...
edit: the "mute" media button light appears to be lit, however pressing it only feeds a software into the computer, and doesn't turn the light off. i'll try playing around a bit more. edit: i just discovered that if you hold down the m key on alsamixer to mute/unmute the "external amplifier" channel, the light flashes! this is beginning to look promising. edit: if i unmute the external amplifier before i log out, it stays unmuted until i log back in again. what can i do to stop it from muting as soon as i log back in again?
I just installed ubuntu 10.10 about 10 days ago, an experience that has been both amazing because its really hard for me to go back to windows already, and frustrating because I'm having a little issue: my internal microphone is not working.here is some relevant info:I had alsa 1.0.23 and decided to upgrade thinking it would solve my problems so I ran the script to install 1.0.24, and for a day or two I lost my sound, without getting back my mic, and just like that the sound came back.I read a lot of posts out there, and ,ade sure I unmuted my mic in alsa soundmixer and pulseaudio.
I ran this:
sudo aplay -l
result:
[code]....
I have a new notebook (ACER Extensa 5635) and I can't make internal or external microphone working. Volume for mic is set to maximum. I have :
cat /proc/asound/card*/codec#*|grep -i codec
Codec: Conexant CX20561 (Hermosa)
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
[Code].....
Just curious if someone could help me with my issue, I've noticed that my internal mic doesn't work, and when I plug in headphones it stops the use of the speakers but I hear nothing through the headphones. I'm running openSUSE 11.3 and have had almost no major problems until this. I've searched around and asked a couple friends and have made absolutely no progress.
View 8 Replies View RelatedI have a Sony Vaio VPCZ128. It has a NVIDIA GeForce GT 330M GPU with CUDA Technology (SPEED MODE) and Intel HD Graphics (STAMINA MODE) (switchable). The Processor is an Intel Core i7-620M with 2.66 GHz and the Chipset from Intel HM57 Express chipset.
Finally I successfully installed Ubuntu 10.10 (mainly following the advice on [URL] and using his kernel). Every thing is working fine including sound (still a few minor problems with backlight and Fn F5/F6). But I still desperately try to get the internal microphone running.
I don't know what to do. All my attempts to make changes with alsa-mixer failed.
View 9 Replies View RelatedJust bought a laptop Packard Bell Easynote TJ61 with an internal sound card Conexant CX20561 (Hermosa) and successfully installed Ubuntu 9.10 64-bit. Only problem was that the microphone (internal and external) was not working in all applications (soundrecorder, audacity, skype etc). Output audio (eg- Rythmbox) worked fine with ALSA and PulseAudio.
Tried a LOT of stuff, but the decisive move was to add: options snd-hda-intel position_fix=1 model=laptop to the file /etc/modprobe.d/alsa-base.conf and reboot.
I recently installed Ubuntu 10.10 and everything went smooth. I was originally using Ubuntu 10.04 version installed via Wubu and decided it was time to make a true install of Ubuntu and decided to use 10.10.
I installed Skype and tried to have a phone convo, but the Microphone wasn't working. I tried to use yfrog.com to record a video from my webcam and the video worked fine, but no audio. I also tried the pre-installed sound recorder to record my voice but that also failed.
I have installed Ubuntu 10.10. everything is ok except with internal speaker in my HP Compaq dc7900 Convertible Minitower PC. audio is coming through headset but not through internal speaker. what might have gone wrong with my system. but it is working with windows 7 ultimate. i'm using dual boot. i have installed the same ubuntu 10.10 64 bit in my laptop DELL Inspiron N4010, with this everything is fine. but i have problem with hp desktop internal speaker. what should i do?
I have observed one thing that in SYSTEM >SOUND > OUTPUT Connector has only two options 1. Analog Headphones 2. Analog output.but in my DELL Inspiron N4010 one more option is there "Analog Speakers".
The internal microphone of my laptop Thinkpad T400 does not work after the new installation of fedora 15. I was trying to use it in SKYPE and could not get any sound recorded at all. However, when I tried arecord, sound is recorded, but is extremely low and not clear with lots of noise.The sound control seems to be different from before. Now available settings are
Code:
None
Analog Stereo Input
Digital Stereo Duplex (IEC958)
[code]....
And the 'Input' page seems not bad because I can drag the Input volume. However, the 'Input level' is empty, or only 1 bar even I drag the 'Input volume' to maximum.Analog Stereo Output and Analog Stereo Duplex (the one I am using) are the two give me output sound. But none seem to work with my internal mic. I haven't tried an external mic, though, because I do not have one.There seems to be no more "advanced volume control" that I used in Fedora 12. Also, there seems to be no more ALSA devices or PulseAlsa devices?
'#arecord -l' list my device as
Code:
Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog].
how to solve this. For example, is there a way to get those ALSA settings back (well, I do not really understand what ALSA is and how it works but it did work when I had Fedora 12)? I do have a lot of packages named 'alsa*' installed.
We have a target board with intel atom processor(COM). OS : Ubuntu 9.04 But I am not able to hear the Internal speaker sound. ->pcspkr driver is present. ->Different tests were conducted inclding echo -e "a" , console-beep package ,writing to the port etc. ->Sound is not heard during system startup also.
View 4 Replies View RelatedI'm making some tests with the internal microphone and I've managed to record sounds but the results have a very low volume. I mean, I have to put the input volume to the max and I still get a pretty bad result. I've checked too the input volume in the alsamixer but no way, can't get better results.
View 5 Replies View RelatedI've been running Ubuntu on my Dell Studio 1749 laptop since I got it, around 8 months ago.I recently upgraded to Maverick 10.10 64-bit, reformatting and partitioning my hard drive in the process (got rid of windows since I never use it) and it was working perfectly until last Wednesday (22.4.2011). On Wednesday I unplugged my usb headset while in a Skype call to switch to the internal speakers and my computer freaked out, black-screened, and froze. When I rebooted, the internal speakers had stopped working completely, even though the sound works perfectly on both sets of headphones I have.
I've tried most of the fixes that have been presented in other threads and none of them are working, including rebooting the laptop with the headset in. I've tried that with both of my usb headsets, even though I don�t like using the one that it froze on for the exact reason that any time I have audio playing with that headset and it gets unplugged, it black-screens and freezes my laptop. Actually audio doesn�t even have to be playing, sometimes unplugging it even with nothing playing still freezes my laptop. It does it once in a while with my other usb headset, as well, but not every time or anything close to that often.One thread suggested that modifying /etc/modprobe.d/alsa-base.conf by appending the following line to the file would work:
Code:
options snd-hda-intel model=dell-m6
But that did nothing at all. Someone else said that they saved a copy of alsa-base.conf and replaced the whole thing with that line, so I did that, with no change. Then I purged alsamixer using
Code:
sudo apt-get purge alsa-base
and
Code:
sudo apt-get purge alsa-utils
Then I rebooted, and reinstalled them, which did not fix the issue. However, it did replace the alsa-base.conf file that I modified which shows me that it actually did purge it. (I was an idiot the first time I tried to purge it and only purged and reinstalled alsa-utils..xD So the file did not get replaced, which was when I realised my mistake) I have NOT modified the new file, although I did copy the contents to a text file in case I need to try that fix again.I should also mention that the speakers do work when first booting up Ubuntu to the log-in screen, both with and without headphones I ran the alsamixer diagnostic at the beginning of all this, here's the link: [URL] And then ran it again after purging and reinstalling alsamixer, here's the new link: [URL] I have tried messing with the settings, disabling the headset, setting the input and output manually to internal speakers while the headset is still plugged in, making sure with GNOME alsa-mixer that the speakers are not muted, rebooting with the headsets in and then unplugging them.
trying to use the internal mic for skype, with no such luck. its an HP Pavilion dv-XXXX (<<i want to say 5000 or 6000, but it isnt in front of me ATM), restarting didnt help, and everything is updated (Fedora 14).
View 2 Replies View RelatedI have a SuSE server (sorry but no idea what version of SuSe it's running.. I'd take a guess at 10.0) on a network with several other SuSE servers. They are all able to be SSHed externally as well as internally and all have their local firewalls disabled. I just had to reboot one of the servers and it is behaving quite strangely. I am able to SSH in and out of it externally, but can't SSH in and out of it internally.
When trying to SSH out internally I get the message:
"ssh: connect to host *.*.*.* port 22: No route to host"
When trying to SSH in internally I get the message:
"ssh: connect to host *.*.*.* port 22: Connection timed out"
Using ssh -v doesn't give any more useful information.
I have double checked that the IP is correct and that the internal firewall is disabled etc. The external firewall hasn't got anything that would prevent it (and shouldn't be an issue anyway as it's an internal only problem... SSH externally works fine). Also, it might help to know that I have the same problem with ping. I can ping this server from an external system, but not from an internal one.
I just did a fresh install of OpenSuSE 11.2 for my fiancee on her new HP Mini 110-1030NR, and everything works great, except for the 5 in 1 card reader. Here is the information I believe you may find relevant:
Kernel
2.6.31.5-0.1-desktop
Output of lspci:
Code:
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2)
00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series]
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
system() and execvp() both work by creating a new process. Question: Do they create new processes by internally calling fork() or there is some other way ?
View 6 Replies View RelatedI run ubuntu 10.10 with apache2 and have 2 virtual hosts set up
here is an example of one of the virtual hosts
<VirtualHost *:80>
ServerName blah.endofinternet.org
ServerAlias blah.endofinternet.org
ServerAdmin davidboychuck@gmail.com
DocumentRoot /var/www/blah
[Code]....
Everything was working perfectly until i changed the internal ip of my router from 192.168.1 to 192.168.192 and now virtual hosting no longer works. As far as I can tell everything is setup correctly. I made no changes to the configuration files. Vhosts just literally stopped working. I've tried clearing dns cache not sure what to do at this point. I have tried to a2dissite and then a2ensite and reload the configurations but it literally just seems like apache is not looking for the vhosts in /etc/apache2/sites-enabled even though my apache2.conf still includes them
#Include the virtual host configurations:
Include sites-enabled/
From the apache error log:
[Sun Apr 03 16:41:50 2011] [error] [client 66.249.72.208] script '/var/www/index.php' not found or unable to stat
[Code].....
It looks like it's just not trying to use the vhost document root because when i go to blah.endofinternet.org it just takes me to the default site.
I've got a handy new Lenovo G560 running with OpenSUSE 11.3 64-bit. After a normal out-of-the-box installation the laptop speakers failed to mute when I plugged in headphones and I was only able to regulate the sound for both the speakers and the headphones simultaneously. Then I installed a whole lot of ALSA stuff and my sound devices were recognized as "PulseAudio server (local)". Speakers muted when I plugged in headphones - a big yay.
Now, though, my microphone doesn't work any more. It worked before, I'd talked on Skype with it, but upon trying to make a call with Skype today I noticed that it didn't work any more. Sound's turned up in KMix, so everything should be okay - does anybody know how to get my microphone working again?
Alright, I'm new to linux, I've googled for days, but I can't for the life of me get my internal mic working. It doesn't register sound in the sound preferences menu, it is not muted.
I have the x120e with the E-350. New install of Ubuntu 11.04 64-bit.
Where to start?
Ubuntu (10.04 - 64 bit) isn't using all internal speakers. Only the right speaker is working, resulting in low volume. If I attach external speakers or headphones, everything is fine. I checked the Alsamixer, but there's nothing to unmute there that has any effect.
[Code]...
The sound settings shows Internal Audio and RV710/730, but if I switch to the latter I have no sound.
running 10.04.2, on a Lenovo G550, I am experiencing an intermittent problem, in that after every reboot, and some wake after suspend, the internal mic has muted. I have to open alsamixer to reset its level, and then it's fine till I reboot and sometimes it is fine after a suspend, but not always. How do I get alsamixer to "remember" the setting?
View 2 Replies View Related
