Ubuntu :: Doesn't Allow To Specify The Input/output Audio Devices?
Jul 28, 2011
For some reason on any application that uses sound, but doesn't allow me to specify the input/output audio devices I don't get anything. I want all audio to go to my USB Headset, and not the onboard soundcard. To start off with, here's alsamixer: Here's a screenshot from Mumble (voice chat) that shows that I've set the USB headset device in there, and it works 100% fine on Mumble.
[Code]...
As you can see from the alsa-base.conf above I've tried specifying snd_usb_audio as the default device, but it's not working.
View 5 Replies
ADVERTISEMENT
Aug 23, 2010
Say I have 2 speakers connected to 2 different sound cards. Under Windows, is it possible to have some sort of virtual device that would forward an audio stream to both sound cards? If this can't be easily done under Windows, a solution for Linux is also fine. lternatively, if the 2 speakers are connected to different channels of a sound card, is there any vendor-independent way to duplicate audio to both channels?
View 1 Replies
View Related
Apr 24, 2010
I want to output two applications one to a headphone and another to the regular speakers, what app can I use?? it would be better if I don't have to move from audio player, I tried with alsa sound mixer but for some readon it doesn't list the speakers
View 1 Replies
View Related
Jul 23, 2011
I am using Ubuntu 10.04 LTS - the Lucid Lynx. I am using the laptop to play video files and view it on TV using HDMI output. No problems. Requirement: to play simultaneously a different media file and be able to listen through say headphone / laptop speakers. While a movie audio is only heard on TV, other audio is heard only on laptop speaker.
View 7 Replies
View Related
Jun 14, 2010
I always keep my headphones as well as my 2.1 speakers connected simultaneously on my PC (Gigabyte motherboard). Both these audio devices work fine simultaneously on my Windows 7, but in Ubuntu, only my headphones work, speakers don't work at all. I tried changing some settings in SOUND PREFERENCES as well as ALSA SOUND MIXER, but not luck so far.
View 1 Replies
View Related
Feb 28, 2010
I am attempting to connect a bluetooth headset to a Telex Intercom System. I can connect my bluetooth headset to Ubuntu and use the microphone and the speaker perfectly. There are no problems with the Line-In or the Line-Out.
Is there any way to connect the BT-Microphone to the Line-Out while connecting the Line-In to the BT-Speaker?
View 1 Replies
View Related
Feb 13, 2011
I am currently trying to start doing some screen casting and having a problem with audio recording in gtk-recordmydesktop. The problem is that I need to record both; my computers audio card output, and my mic input at the same time. As of now I am able to record one or the other.
View 4 Replies
View Related
Aug 2, 2011
I have a TV card connected to my Dish box, and I would like to use it on my computer. The tv card works fine, and the audio is connected to my line in. The audio card receives the audio signal, and I can set the volume and record it without any problem, but I can't get it to redirect to an output in order to hear the sound. I have been battling with this issue since a kernel update back when 11.2 was about to come out. Back then, the alsa mixer had an option called audio loop-back, which did the trick. Since I know I ca record the audio and play it back without any problem, is there an application that can do this automatically and simultaneously?
View 1 Replies
View Related
Sep 7, 2015
I'm a new user of Linux and just recently installed Debian 8 on my computer, an Emachines W3118. My problem is that the audio went out a couple of days ago and I don't know WHY it went out, no audio, and HOW to get it back on. I tried several command line methods that didn't work, probably because they didn't completely relate to the problem with me being a Linux beginner and all. When I manually turn the knob on the speaker up, I can hear noise to where the speakers sound like they're physically operational, but with no output or input.
View 10 Replies
View Related
Mar 4, 2010
I have Ubuntu 9.10 installed but the sound is way below normal..
Pulse-audio just doesn't give enough output..
Max output is just average...
I have a 945 Intel chipset..
View 1 Replies
View Related
Jul 20, 2010
I have a small audio problem: the Audio that exists from the back of my PC is working like a charm, but the one that cames out from the Frontal output doesn't work at all. It works well on OpenSuse 11.2, but it's not working on opensuse 11.3.
View 9 Replies
View Related
Sep 11, 2010
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
View 3 Replies
View Related
Aug 3, 2010
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
View 4 Replies
View Related
Apr 3, 2010
Right after I installed F12 on my desktop (using KDE), System Settings showed 4-5 audio devices.
At the beginning, sound wasn't working, so I promoted the Intel audio device to the top of the list and then I got audio.
Next login, the system complained that there were unmanaged audio devices and I chose to keep the configuration (or something like that...).
However, now only the "Internal Audio Analog Stereo" device is listed and I have no sound again
I also tried to promote the GStreamer backend over Xine, without luck.
Here are some specs:
View 2 Replies
View Related
Mar 7, 2010
I installed KMplayer but I cant play video files...No video output but can get only the audio output...So how to make this work for videos?
View 2 Replies
View Related
Jan 25, 2011
Running 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
View 3 Replies
View Related
Jul 19, 2011
I don't know anything about ubuntu. Could you guys help me out. I'm pretty knowledgeable with windows if you guys need a printout of something let me know. My friends getting really frustrated about this. Help!!i
So here's the situation. He plugs his audio jack into his computer and then into the speakers but it still plays from the computer speakers.
View 7 Replies
View Related
May 2, 2010
Upgraded from 9.04 to 9.10, touchpad on my laptop stopped working, but i had my USB mouse so I upgraded to 10.4. After the reboot, both the USBMouse and touchpad no longer work, rendering my Ubuntu Installation a useless. Luckly I have OpenSuse installed on this laptop as well. I have a Gateway MP6954
View 1 Replies
View Related
Sep 1, 2011
Last weekend I did a fresh install of Natty into my new HD following the crash of my last one (hooray for periodic backups). I had no problems at all, my mouse and keyboard were working fine. The system was running without a xorg.conf file in /etc/X11.Then, I installed the restricted driver for my NVidia GeForce 8600 GT and rebooted, but the driver was not being used. I ran nvidia-xconfig as root, which created a xorg.conf file telling X to use the driver. Reboot, everything is working fine.
Now, this morning a few packages were updated, including xorg. The next time I tried to log in after this update, I found that neither my mouse nor keyboard were responding - I couldn't even switch to another tty or, indeed, do anything other than a hard reboot.I have a LiveUSB with natty and a partition running Sabayon Linux on another hard drive from which I can mess around in my Kubuntu partition. How do I fix this?
View 2 Replies
View Related
Mar 27, 2010
I finally got audio working on my ubuntu 9.10 desktop... now I am having sound issues watching movies from a network share.The sound device continually randomly changes to "dummy output device" and then there is no sound output. The sound icon dissapears on the toolbar. To get it back and audio to start working I have to $sudo alsa force-reloadIt seems to happen everytime there is a network delay, the movie will stop for a second and then when it plays the sound is gone
View 1 Replies
View Related
Jan 7, 2011
ubuntu 10.10
I have a remote control (imon --> Harmony) that acts like a mouse. My goal is to remove that feature. Iam using lirc with Linux input layer (/dev/input/eventX) because Imon driver doesn't work at all. To get Linux input layer to work you need to choose the imon device.
Code:
cat /proc/bus/input/devices
Code:
I: Bus=0003 Vendor=15c2 Product=ffdc Version=0000
N: Name="iMON Remote (15c2:ffdc)"
P: Phys=usb-0000:00:12.1-2/input0
[Code].....
View 9 Replies
View Related
Jan 25, 2010
I have been using ubuntu 9.10 for about a week and have had problems with my keyboard and track pad on my laptop. I can navigate grub (I'm dual booting) but once ubuntu starts to load then I am unable to use my input devices. Even using cap locks doesn't turn on the corresponding light. As fa as I can tell it seems intermittent and I can make an STR.
View 1 Replies
View Related
Mar 4, 2011
Is possible to have two identical sound card outputs? For example, is I want to use two headphones at the same time.
View 6 Replies
View Related
Jul 23, 2011
I'm running openSUSE 11.4 x86_64. When I am using GIMP, it will regularly stop allowing me to use my mouse or Wacom Intuos 3, forcing me to use my keyboard, but only within dialogs such as for scaling a layer, saving a file, etc. It's so flaky that the mouse/tablet will work sometimes and not sometimes, back and forth, within one "session" of using GIMP. It's driving me nuts. Sometimes I struggle with the keyboard (a struggle because it's indirect and sometimes counter-intuitive), other times I'll close the dialog and re-open it to see if that time the mouse (or tablet) will work. From what I've seen, I'll either be able to use both or not able to use both, rather than only having the mouse but not the tablet or vice versa.
View 4 Replies
View Related
Apr 28, 2011
I have an Intel HDA audio card, and would like to record both my soundcard output and my microphone input at the same time. Getting to record my soundcard output (aka "Stereo Mix" or "What-U-Hear") is impossible for my soundcard without using the PulseAudio monitor, so I've set that up. Now I can record either the PulseAudio monitor for my soundcard, or the microphone input, but I don't know how to record both at the same time.
Currently, my .asoundrc looks like this:
Code:
pcm.pulse {
type pulse
}
ctl.pulse {
[code]....
So now I can choose either "pulse" as an input channel in, for example, Audacity or RecordMyDesktop applications (and then set in the PA volume control the actual channel which I want recorded), or choose "pulse_monitor" or "pulse_mic", in order to record either the PA monitor or the microphone, respectively.
I've read through the ALSA plugins reference, as well as the Asym and Dmix pages on ALSA wiki, but I'm still not sure how to put this together. I figured there should be a way either to route the microphone input into the ALSA output, and thus make the PA monitor "hear" what I speak into the microphone, or to make a completely new channel with both ALSA output and microphone input as "slaves", and then use that for recording.
View 4 Replies
View Related
Nov 11, 2010
I just implemented dracut on my Slack. It works well, but for this also I had to rebuild the kernel. Everything works as it should beside KDM. When KDM start mouse/keyboard don't work. I check the logs and I don't actually see any errors.Note: Im using Slack in VirtualBox with fbdev or vesa driver and it doesn't work with neither of the drivers. I suppose its something missing in the kernel, but don't know what.Before rebuilding the kernel and implementing dracut, everything work with fbdev and/or vesa
View 3 Replies
View Related
Jan 7, 2011
What does this command mean? Is this some sort of a pipe where output of one program goes to input of another?
Code:
View 4 Replies
View Related
Nov 19, 2010
Today went from jaunty to koala then to lucid. The package manager doesnt work nothing works in terminal for apt-get or anything getting the message ---->
View 1 Replies
View Related
Jun 25, 2011
Quote:Error benchmarking: helper exited with exit code 1: Error reading 27099136 bytes at 2509258752 from /dev/sda: Input/output errorthis issue is also preventing me from making a copy/backup of the partition with gpartedwhich i decided i should do since i had a scare when booting todayunable to mount / i said fix itthen it said /var was not readyi waited it became readyi am running 10.04.2 would upgrading the kernel to get trim support fix it?
Code:
sudo fsck -t ext4 /dev/sda1
fsck from util-linux-ng 2.17.2
e2fsck 1.41.14 (22-Dec-2010)
System: clean, 247383/983040 files, 1394162/3907803 blocks
Solution: drive is under warranty and it needs to be used this is not software problem
View 5 Replies
View Related
Jan 30, 2011
I want to listen to this audio file: [URL] but my real player 11.0.0.4028 gold desn play it, it says that there is a codec 28_8 missing, I go to relaplayer page, download the last release available for linux systems, but the message is the same : audio codec missing and doesn't play the audio.
I havev tried to play the audio with smplayer (not luck), vlc can play the audio but the pause button doesn't work so I have to listen the entire audio all the time I stop it playing. Is there any audio player capable od reproducing in the proper way this audio in ubuntu? No one of my video players totem, smplayer, realplayer or vlc are capable of playing this video: [URL]
View 9 Replies
View Related
