Ubuntu Multimedia :: Copy DVD To Hard Drive In Mpeg Format?
Nov 26, 2010
I want to copy my home video DVD's to my hard drive and I want the format to be in an mpeg format (I suppose I should want mp4). The DVD's are in some sort of VOB, IFO format....or whatever they're called.There are many chapters on each of the DVD's and I want each of the individual chapters copied to the hard drive so I can rename the files something like, "fishing.mpeg" or "skiing.mpeg" and not some huge 3 gb file.
K9copy does a fair job but won't complete it. That is- k9copy gets 86% encoding done (I think that's the word for it) but won't finish copying the remainder of the chapters.
View 9 Replies
ADVERTISEMENT
Dec 12, 2010
I would like to copy some of my dvd movies to my external 1tb hard drive what program should I be using or is there a work around I should follow.
View 3 Replies
View Related
Sep 15, 2010
I need some assistance in trying to format a USB hard drive to vfat format but can't seem to do so. I am currently using RHEL 5.3. I have tried the following commands and they all come back as "command not found"
mke2fs vfat /dev/sc1
fdisk vfat /dev/sdc1
mkfs.vfat /dev/sdc1
What am I doing incorrectly?? Can someone please point me in the right direction??
View 6 Replies
View Related
May 14, 2010
I have an 80gb hard drive that I used in an xbox for xbmc and it was formatted to whatever it needed to be formatted to for it. Now that I want to use it in my computer, I can't format it back to ext4 or NTFS. It's somewhat recognized, but the partition shows up as unknown. Is there a program that I can get to reformat it? idk if gparted will work cuz it won't startup on the live CD. I will give it a shot once I install ubuntu onto the computer.
View 9 Replies
View Related
Nov 23, 2010
I was looking in the disk utility today, and i was looking in the hard drive formatting section. in the drop down box, i noticed Apple. does that mean that i could format the rest of my hard drive to be OSX compliant?
View 3 Replies
View Related
Dec 18, 2010
I just bought a new 320gb laptop hard drive and mounted it into an external enclosure. The hard drive has never been formatted. I plugged it into my computer running Ubuntu 10.10 and nothing happens. I expected something toopup and say the drive has not been formatted and give me formatting choices. I looked in Places>Computer and it's not there. I even looked in Gparted and it does not show it. So how on earth do I format a new external hard drive?
View 9 Replies
View Related
Aug 10, 2011
I wanted to get started with Ubuntu so I partitioned an external hard drive with Ubuntu 11.04 onto it. After finding out my computer couldn't but up from a external hard drive I wanted to format my drive. When I plugged it into my computer, Windows would not recognize it. I then dual booted Ubuntu 11.04 onto my laptop and attached my drive. Ubuntu found it a recognized it as 3 separate disks. I then opened up disk utility and told it to format the drive. After clicking a couple "OKs" I got an error message: An error occured while performing an operation on "500 GB Hard Disk" (Seagate FreeAgent GoFlex): The device is busy I clicked details and got:One or more partitions are busy on /dev/sdb. I was wondering what I could do since it isn't doing anything in the first place. I just want to format the whole thing.
View 3 Replies
View Related
Jun 8, 2010
I have an 500GB Iomega external drive connected to my iMac and used for the Mac Time Machine back-ups. I want to put a small partition on there that I can use to back-up my Ubuntu files which are on my laptop. I thought that I would be able to just copy the entire Home file on Ubuntu to this drive be drag and drop but this does not work. I get a notice to inform me that I do not have permission to create file there. I can however move files in the other direction (from the external drive to Ubuntu on the laptop. I assume this is because the external drive was formatted for Mac and I hope the problem will be solved if I could format a part of the drive in ext4 to accommodate the linux files.
View 7 Replies
View Related
Jan 28, 2010
I've currently got 9.10 and have (somehow) managed to mess the system up already!It's a new computer so I'm not fussed about data loss etc, but is there a way to completely reset the system which will also format the hard drive (as it was a download that has messed it up!) without losing the O/S?
View 9 Replies
View Related
Jun 23, 2010
An upgrade %100 pwnd my system: I performed an upgrade to Lucid from Karmic and I lost my keyboard input and sound etc etc etc. I then made a Karmic boot-run/install CD, & a USB startup stick. I then backed up my important information on flashdrives etc. At this point in time I have 2 partitions one with my old user account & info on it, and the other as a new (re)installed Karmic partition. My question is: What is the procedure for:
a) formatting the drive,
b) not keeping the 2 partitions, and
c) re-installing Ubuntu (karmic) back onto it?
I have GParted ( but I can't see how to use it to format ), and I have no clue how to format the Drive from either within the GUI or at the command-line. How do I format & re-install Ubuntu? What is the sequence or steps? I can probably do the re-install intuitively but I'm concerned there may be Ubuntu tricks I don't know about! Also- does this 2 partition thing cause any complications to formatting?? So honestly my question is simply how to format the drive from within the system.
View 6 Replies
View Related
Jul 28, 2010
and am running Ubuntu 9.04 version. My wife's USB flashdisk has picked up viruses from computers running Windows in her office. My quick solution is to format it (and external hard disks as well) in my machine.
View 7 Replies
View Related
Aug 29, 2010
I have a PC with really low specs ( it's a back up computer) that's running puppy linux but I don't really like it. It's hard to navigate/get things you could easily do on Windows Xp done, it's menus are crowded and well it can't even shut off properly which is a shame. I've had it on for only a week.
Anyways, I've downnloaded the Xubuntu . Iso and burnt it at 1x speed. I pop it in and it does take a long time to go through the install. ( I'm not sure if it's because of the disc read speed or because of the memory and what not) I chose the option to delete everything and install Xubuntu. It works and then I get a couple of error message and then the last one says something like " Can not format sda1" or something like that.
View 4 Replies
View Related
Sep 8, 2010
Below is results from attempt at formatting my hard drive. As you can see a driver is installed, but not working. Perhaps something is missing? Seems a bit odd that a "unable to read" comes back when disk data is reported. The drive just went through a low level format. BTW this is a fiber channel drive. Also on board are 5 scsi drives. Adaptec raid card. Not sure if that would have any relevance, but there you are.
barry@vm1:~$ sudo lshw -C disk
*-disk
description: SCSI Disk
product: ST173404 CLAR72
vendor: SEAGATE
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sdb
version: 3A98
serial: 3CE0SRYL00007142FHAW
capacity: 67GiB (72GB)
capabilities: 10000rpm
configuration: ansiversion=3
barry@vm1:~$ sudo fdisk /dev/sdb
Unable to read /dev/sdb .....
View 4 Replies
View Related
Oct 12, 2010
can't find an answer for this here or elsewhere. I recently installed Ubuntu on my laptop with no problems...until now. I bought a Seagate portable drive for backup/extra storage purposes. When I plug in the drive and start up Disk Utility, it recognizes the Drive and whatnot, but when I click "Format Drive" I end up (after clicking through the warnings) with an error message stating:Error Formatting DriveAn error occurred while performing an operation on "640 GB Hard Disk" (Seagate Portable):The device is busyI clicked for details, which resulted in:One or more partitions are busy on /dev/sdb(Not that detailed, if you ask me.)I then entered the command line (a scary place for someone who came over from OSX) Code:sudo lshw -C diskgave me this info about the hard drive I'm trying to format:
Code:
*-disk
description: SCSI Disk
[code]...
View 7 Replies
View Related
Nov 4, 2010
I have a Seagate external hard drive and I want to use it to back up my home server since it runs Ubuntu 6.10 and the upgrade to 10.10. My problem is that I am not able to format the drive to use it. I can not change the permissons or if I try to format I have all sorts of trouble. I have tried doing it on the home server running 6.10 and another pc running 10.10 and had no luck. Is there a better way? I have even tried chmod and chown with no luck.
View 2 Replies
View Related
Sep 15, 2010
I added new hard drive on a machine running linux redhat linux 5 and I need to define and format this drive to be usable.
View 5 Replies
View Related
Feb 27, 2010
I have a 250 GB external hard drive formatted with Windows NTFS file type.How do I format it to use linux and what file type is best. I'm done with Windows so that is not a concern.
View 4 Replies
View Related
Jun 8, 2010
I am currently using Lucid Lynx and when I open Nautilus, the drives are labelled as follows:
200 GB Hard Diskrive Label
How can I get rid of the the 200 GB Hard Disk bit
View 1 Replies
View Related
Jul 21, 2010
how to format a single Ubuntu hard drive - no partinioning at the moment.
View 4 Replies
View Related
Dec 23, 2010
I am trying to install ubuntu on a separate hard drive than the one I have windows 7 installed on. I have two 500 gb hard drives in my computer; one I only want to use for windows, and the other only for linux. The hard drive that I am not using yet (the linux one), for some reason, has a 100mb "system restore" partition on it, which i do not want on there...but when I try to format the drive in gparted, it says "cannot format drive, daemon inhibited". I also tried in fedora 14's disk utility, same error and message, and in windows partitioning utility, it tells me it cannot format this drive.
View 3 Replies
View Related
Jan 17, 2011
Upon installation of Ubuntu a while back, i was using a windows xp machine with two different harddrives. Instead of formatting the xp drive and installing Linux, i decided to install Linux on the secondary harddrive. This worked all fine and dandy until recent, when I have found my linux drive filling up near capacity. I would like to format the XP harddrive and mount it in linux to give some more disk space. The problem i have found, is that the XP drive is the drive with GRUB.
View 3 Replies
View Related
Sep 1, 2011
If I boot from a CD (into xubuntu), how do I reformat the new hard drive (which will later contain ubuuntu and windows xp (wubi dual boot)).
I also need to know how to format the replacement hard drive using xubuntu, and which type of format to use - I think I need to use NTFS formatting.
View 1 Replies
View Related
Mar 19, 2011
Wanted to image my mom computer. Her computer is windows 7 and has ntfs. So... how do I mount it?
Below is what I did.
Code:
View 3 Replies
View Related
Mar 5, 2010
I am trying to use k9copy to simply copy the iso of a DVD movie to my hard drive. No matter what I select I can't get "copy" to enable - it stays grayed out. When I try to run the wizard it crashes after I select in my input source. I don't care what app I use, I just want something lightweight and easy to use that will copy the iso.
View 7 Replies
View Related
Dec 8, 2010
i have ubuntu 10.04 on a partition of a drive,
i have bought a new harddrive and want to copy the content of the "ubuntu partition" to a new partition on the new drive.
can i just copy all the data and then run a live disc to make a new boot loader ?
View 9 Replies
View Related
Jan 9, 2011
I want to copy my ubuntu install to a bigger hard drive, and am not quite sure what to do. According to my google searches, I need to run ubuntu from a live cd, then in a partitioning program copy the ubuntu partition to the new one, then resize it. Is that all? Do I need a linuxswap partition on the new hard drive? I have been using kde partition manager to arrange my new partitions. On one hard drive I have the partition I want to install ubuntu on(what type should this be? ext4?) and a partition to share between ubuntu and windows, and then will use my old ubuntu partition for installing windows xp.
View 2 Replies
View Related
Sep 6, 2010
I just added a 2nd SATA drive to my openSuse 11.2 desktop. What do I do now to partition and format? I want to partition some of the new drive for linux, and leave some of it unpartitioned for Windows (I dual boot). I want to leave my existing 1st drive as is. What tool do I use? How do I proceed?
View 4 Replies
View Related
Mar 24, 2010
I've got this hard drive that I know that is formatted to either ext3 or ext4, but I want to find out which format it is. I'm unfamiliar with many commands, I tried 'fdisk -l' but it didn't yield any useful information to me. Is there a command wherein I can easily find out the format of disks?
View 3 Replies
View Related
Apr 15, 2010
how do i format a hard drive in order to install linux,The following errors are displayed during installation:"VolGroup01" not found followed by could not find filesystem '/dev/root
View 2 Replies
View Related
Nov 3, 2010
My Red Hat EL 5.5 64 bit edition, I've install it on my primary hard drive 12 GB it works fine and then I added secondary 20 GB hard drive (sdb1) into this system and then format it as VolGroup01 see the attachment, but how come it doesn't show up ?
Code:
View 3 Replies
View Related
