Ubuntu :: Cannot Format FC Hard Drive - Unable To Read
Sep 8, 2010
Below is results from attempt at formatting my hard drive. As you can see a driver is installed, but not working. Perhaps something is missing? Seems a bit odd that a "unable to read" comes back when disk data is reported. The drive just went through a low level format. BTW this is a fiber channel drive. Also on board are 5 scsi drives. Adaptec raid card. Not sure if that would have any relevance, but there you are.
i was trying to format one drive, accidentally formated another, told the format process to stop, and i'm unable to read the folders or files in the drive. i see some greek, odd symbols... But cant open the folders.
I am running the latest suse release downloaded directly from their website. I ran the installation after buring the dvd and everything seemed to be working fine. after the installation i ran updates and used it for a little bit. When i shut it down that night and went to restart it I got an error that stated the OS wasnt there. I then went through the installation and everything and it retained the information from the installation before (web history etc.) but for some reason every time I reboot or shut it down the system is not able to read the startup information from the hard drive and will not come on without me re installing it.
I need some assistance in trying to format a USB hard drive to vfat format but can't seem to do so. I am currently using RHEL 5.3. I have tried the following commands and they all come back as "command not found"
I recently got a computer donated to me for free from my Computer Science class, as the teacher couldn't figure out what the problem was that was preventing him from booting to the startup screen (all I could figure out was that the slot the memory card was in was bad, so I switched slots and got it working). The hard drive on the computer was wiped with a disk nuker called DBAN. Now I would like to install a Linux OS on the computer, but whatever disc or distro I try gives me similar "unable to read" errors. I would like to know if there's anything software-wise I need to do before attempting to replace any hardware. An example of the error I'm getting is as follows (using a mandriva livecd):
/etc/rc.d/rc.sysinit: line 1281: /var/log/dmesy: Read-only file system SQUASHFS error: sb_bread failed reading block 0xa6e58 SQUASHFS error: unable to read cache block [29b963ea:782] SQUASHFS error: unable to read directory block [29b963ea:782]
Anyone know what I need to do to get this fixed so that I can install a Linux distro?
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I got some documents scanned today and had them put in a USB drive. The shopkeeper informed me that it has a virus, yet he transferred the files onto the USB drive. When I put it into my computer ten minutes later, the drive was not getting mounted. I read up and tried installing usbmount. After installing that, I managed to mount the drive. However, the drive was read-only on Ubuntu. On Windows, I found a virus and tried unsuccessfully to delete it (read-only). I tried again on Ubuntu, but didn't manage to delete the infected file (ReCyCleR/sEtuP.exe). I have now backed up all the files on the disk (except, obviously, the ReCyCleR directory). When I try to format the drive using gParted, I get:
I have an 80gb hard drive that I used in an xbox for xbmc and it was formatted to whatever it needed to be formatted to for it. Now that I want to use it in my computer, I can't format it back to ext4 or NTFS. It's somewhat recognized, but the partition shows up as unknown. Is there a program that I can get to reformat it? idk if gparted will work cuz it won't startup on the live CD. I will give it a shot once I install ubuntu onto the computer.
I was looking in the disk utility today, and i was looking in the hard drive formatting section. in the drop down box, i noticed Apple. does that mean that i could format the rest of my hard drive to be OSX compliant?
I just bought a new 320gb laptop hard drive and mounted it into an external enclosure. The hard drive has never been formatted. I plugged it into my computer running Ubuntu 10.10 and nothing happens. I expected something toopup and say the drive has not been formatted and give me formatting choices. I looked in Places>Computer and it's not there. I even looked in Gparted and it does not show it. So how on earth do I format a new external hard drive?
I wanted to get started with Ubuntu so I partitioned an external hard drive with Ubuntu 11.04 onto it. After finding out my computer couldn't but up from a external hard drive I wanted to format my drive. When I plugged it into my computer, Windows would not recognize it. I then dual booted Ubuntu 11.04 onto my laptop and attached my drive. Ubuntu found it a recognized it as 3 separate disks. I then opened up disk utility and told it to format the drive. After clicking a couple "OKs" I got an error message: An error occured while performing an operation on "500 GB Hard Disk" (Seagate FreeAgent GoFlex): The device is busy I clicked details and got:One or more partitions are busy on /dev/sdb. I was wondering what I could do since it isn't doing anything in the first place. I just want to format the whole thing.
I've currently got 9.10 and have (somehow) managed to mess the system up already!It's a new computer so I'm not fussed about data loss etc, but is there a way to completely reset the system which will also format the hard drive (as it was a download that has messed it up!) without losing the O/S?
An upgrade %100 pwnd my system: I performed an upgrade to Lucid from Karmic and I lost my keyboard input and sound etc etc etc. I then made a Karmic boot-run/install CD, & a USB startup stick. I then backed up my important information on flashdrives etc. At this point in time I have 2 partitions one with my old user account & info on it, and the other as a new (re)installed Karmic partition. My question is: What is the procedure for:
a) formatting the drive, b) not keeping the 2 partitions, and c) re-installing Ubuntu (karmic) back onto it?
I have GParted ( but I can't see how to use it to format ), and I have no clue how to format the Drive from either within the GUI or at the command-line. How do I format & re-install Ubuntu? What is the sequence or steps? I can probably do the re-install intuitively but I'm concerned there may be Ubuntu tricks I don't know about! Also- does this 2 partition thing cause any complications to formatting?? So honestly my question is simply how to format the drive from within the system.
and am running Ubuntu 9.04 version. My wife's USB flashdisk has picked up viruses from computers running Windows in her office. My quick solution is to format it (and external hard disks as well) in my machine.
I have a PC with really low specs ( it's a back up computer) that's running puppy linux but I don't really like it. It's hard to navigate/get things you could easily do on Windows Xp done, it's menus are crowded and well it can't even shut off properly which is a shame. I've had it on for only a week.
Anyways, I've downnloaded the Xubuntu . Iso and burnt it at 1x speed. I pop it in and it does take a long time to go through the install. ( I'm not sure if it's because of the disc read speed or because of the memory and what not) I chose the option to delete everything and install Xubuntu. It works and then I get a couple of error message and then the last one says something like " Can not format sda1" or something like that.
can't find an answer for this here or elsewhere. I recently installed Ubuntu on my laptop with no problems...until now. I bought a Seagate portable drive for backup/extra storage purposes. When I plug in the drive and start up Disk Utility, it recognizes the Drive and whatnot, but when I click "Format Drive" I end up (after clicking through the warnings) with an error message stating:Error Formatting DriveAn error occurred while performing an operation on "640 GB Hard Disk" (Seagate Portable):The device is busyI clicked for details, which resulted in:One or more partitions are busy on /dev/sdb(Not that detailed, if you ask me.)I then entered the command line (a scary place for someone who came over from OSX) Code:sudo lshw -C diskgave me this info about the hard drive I'm trying to format:
I have a Seagate external hard drive and I want to use it to back up my home server since it runs Ubuntu 6.10 and the upgrade to 10.10. My problem is that I am not able to format the drive to use it. I can not change the permissons or if I try to format I have all sorts of trouble. I have tried doing it on the home server running 6.10 and another pc running 10.10 and had no luck. Is there a better way? I have even tried chmod and chown with no luck.
I have a 250 GB external hard drive formatted with Windows NTFS file type.How do I format it to use linux and what file type is best. I'm done with Windows so that is not a concern.
I want to copy my home video DVD's to my hard drive and I want the format to be in an mpeg format (I suppose I should want mp4). The DVD's are in some sort of VOB, IFO format....or whatever they're called.There are many chapters on each of the DVD's and I want each of the individual chapters copied to the hard drive so I can rename the files something like, "fishing.mpeg" or "skiing.mpeg" and not some huge 3 gb file.
K9copy does a fair job but won't complete it. That is- k9copy gets 86% encoding done (I think that's the word for it) but won't finish copying the remainder of the chapters.
I am trying to install ubuntu on a separate hard drive than the one I have windows 7 installed on. I have two 500 gb hard drives in my computer; one I only want to use for windows, and the other only for linux. The hard drive that I am not using yet (the linux one), for some reason, has a 100mb "system restore" partition on it, which i do not want on there...but when I try to format the drive in gparted, it says "cannot format drive, daemon inhibited". I also tried in fedora 14's disk utility, same error and message, and in windows partitioning utility, it tells me it cannot format this drive.
Upon installation of Ubuntu a while back, i was using a windows xp machine with two different harddrives. Instead of formatting the xp drive and installing Linux, i decided to install Linux on the secondary harddrive. This worked all fine and dandy until recent, when I have found my linux drive filling up near capacity. I would like to format the XP harddrive and mount it in linux to give some more disk space. The problem i have found, is that the XP drive is the drive with GRUB.
I set up a server using ubuntu 9.10, with two hard drives in a hardware Raid 1 setup and with two more drives for recurring backups. The problem is that the two drives for backup are set to read only and won't allow me to change the permissions even when logged in as root. I have tried putting "rw" into the "fstab" file with no luck, I have also tried running "gksudo nautilus" and "fsck -r /dev/sdc" but still have the same message that I don't have the necessary permissions to complete the task.
**I just tried erasing the data on the disk and creating a new partition, the disk utility allowed me to erase the data and create FAT32 partitions with the same permission problems but would not allow an EXT partition or NTFS partition (it would give and error message stating:"Error creating file system: helper exited with exit code 1: helper failed with:mke2fs 1.41.9 (22-Aug-2009)")**
***I fixed the problem by fixing a formating problem in fstab and reformatting the drives to ext4.(the fstab had a problem with the way that I broke up the lines when I input the info for the new drives, and I didn't realize it until I maximized the window in gedit.)***
I just added a 2nd SATA drive to my openSuse 11.2 desktop. What do I do now to partition and format? I want to partition some of the new drive for linux, and leave some of it unpartitioned for Windows (I dual boot). I want to leave my existing 1st drive as is. What tool do I use? How do I proceed?
I've got this hard drive that I know that is formatted to either ext3 or ext4, but I want to find out which format it is. I'm unfamiliar with many commands, I tried 'fdisk -l' but it didn't yield any useful information to me. Is there a command wherein I can easily find out the format of disks?
how do i format a hard drive in order to install linux,The following errors are displayed during installation:"VolGroup01" not found followed by could not find filesystem '/dev/root
