From banshee if I try to play the radio station [URL] it fails. However if I run gnome-mplayer [URL]. It works fine. Close mplayer, and then try banshee again to the same url and it now works?
View 2 Replies
I just noticed Banshee is the new default player in Natty so I decided to move over my music and radio stations.The media import worked for my few mp3s (only have a couple on here) I have but my radio stations did not import. Since I mostly listen to the radio while on the computer (ipod when I am not), I bit the bullet and recreated all my radio stations by hand.
Most worked but a few of my favorites do not.BBC World Service did not work so I launched Rhythmbox since it is still installed and BBC and the other stations played fine.Searching around the net it looks like Banshee had problems with BBC before since it is an .asx type link but that was supposed to be fixed in one of the 1.x releases.I found Vermont Public Radio hosts BBC World in a different format but my other stations are out of luck unless I stick with RB for now.
I just installed OpenSuse 11.2 KDE on my Macbook and try as I might, I cannot get used to Amarok. I like Banshee and it's simple interface, plus the way it handles radio stations and the like.
I did install it using YaST and I am able to run it, but I am unable to add internet radio stations and also I am unable to play them (and other MP3 files) if I manually connect to the stream. As far as adding radio stations, I am unable to because the Genre box stays grayed out and the Save button stays grayed out because the Genre box has not been filled in (but I can't because it's grayed out). As far as playing MP3s, Banshee says I need a codec and when i click 'Search' for a suitable codec, it takes me to an OpenSuse download page with the decoder there but it's for OpenSuse 10.3, not 11.2.
These are probably simple problems with simple solutions but I can't seem to figure them out. Also, K3B says the MP3 Decoder is missing as well. I'm sure it is related to the Banshee problem too.
this media player is not playing [URL]I have played other internet radio and tv stations through vlc but this one doesn't seem like i am supposed to play it through vlc?
View 2 Replies View RelatedAnyone know how I can play a .wax radio station on ubuntu. The link I have is:URL...I don't think this is possible based on some research but find it hard to believe and do not understand why.
View 5 Replies View RelatedI used to be able to listen to live Internet radio (Classic fm and Chill) but no longer. The podcasts of these stations activate Mplayer but not the live stations
View 1 Replies View Relatedi have what might be a really simple, or really confusing question. i.m not exactly sure.
my problem is that i just downloaded streamplayer, and i would like to listen to Hollister Co.'s radio through it. here is the address to the player itself:[URL]... if anyone could please tell me how to get it to play on streamplayer, i would really appreciate it. i tried to find the URL through Chrome.s "inspect element" option, and found a few, but none of them seemed to work. what should i do?
I want to play this link: [url]
It's a radio online station and i can't find the way to play it
Ubuntu 10.04 with Media player vlc xmms xine.
When I try to play anything in banshee it crashes with the error:
Code:
=================================================================
Got a SIGSEGV while executing native code. This usually indicates a fatal error in the mono runtime or one of the native libraries used by your application.
=================================================================
Same thing happens with Listen and Rhythmbox, but with a segmentation fault.
Amarok doesn't even get past the splash screen, but that's more or less okay because I'd rather stick with gnome.
Guayadeque is the only decent music player that works, and even it isn't without its issues. Audacious also works, but I don't like Audacious(the whole "one big playlist" system... ew).
Of course if I had my way I'd skip gnome music players entirely and go with foobar2000, but wouldn't you know it, that doesn't work either. [URL]
I'm using 10.04 beta, but these problems were present on 9.10 too.
I just added the liveradio extension to banshee which contains both magnatune and shoutcast support.
Magnatune works perfect..but for shoutcasts i can see all stations lists and load them ..but when i click play it stucks in contacting status .. it suddenly worked only one time and then it does not work.
I'm running Ubuntu 11.04 on a Virtualbox VM under a Windows 7 host.Sometimes Banshee won't play anything. The play button doesn't change, the progress bar doesn't start moving, and Banshee says it's idle. This doesn't always happen, sometimes I can play a few tracks fine and then suddenly in the middle of a track Banshee will stop and nothing will get it going again. Other times it happens from startup. Neither restarting the player nor rebooting the VM necessarily helps.
View 1 Replies View RelatedI've got the multimedia stuff setup as here: Multi-media and Restricted Format Installation Guide - openSUSE ForumsI can play .wma files with VLC or with mplayer without any problems. However trying to play them with banshee it doesn't work and it pops up a dialog asking whether I want to search for a suitable codec (which also doesn't work).
View 5 Replies View RelatedI want to retain Banshee on my system. However, whenever I buy a CD that also contains video, it will not play the music or video. When I try to listen to the music, it simply puts a red cross against each track. Since combining video and music is VERY common, this means I have a whole host of CDs that will not play. MS media player and VLC have no problems with these, so how can I make Banshee play them?
View 9 Replies View RelatedIs there any way I can run .flv videos in Banshee? It plays the audio (which I believe is mp3), but it shows no video.
View 4 Replies View RelatedI see that whenever I try and run a video, the system defaults to try and run it in Banshee.Banshee, though, sits there with a black screen and the information on what it is supposed to be playing. Clicking the Play button does nothing. This includes OGG (OGV?) video files.Does anybody use this feature in Banshee and got it to work?
View 1 Replies View RelatedI have a dsi so all of my music in .m4a I have all the codecs/gstreamers packages installed and they are all from packman it's not my sound cause I can play them in vlc but in rhythm box it says that I do not have the proper codec to play the file. Any ideas? Also I'm on 11.2 latest updates.
View 3 Replies View RelatedTotem and Banshee don't seem to want to play .avi files, Kaffeine, SMplayer work perfectly though. I followed the Multimedia guide, and switched system packages to Packman.
View 2 Replies View RelatedI just started using openSUSE 11.3, and the default music player that it uses is Banshee. I installed the required plugins and packages to get mp3 playback to work, but I cant seem to find a way to get it to play any mp4 files. This wouldn't normally be a problem, but a lot of my music is in that format and I cant get any of it to play.
View 9 Replies View RelatedI found out that every time I play a file from my Banchee playlist after restarting my computer it won't play. The cure for this is just opening places/ntfs partition.After that it plays the same playlist normaly. But it's anoying having to do this every time..
View 3 Replies View RelatedSo, after an update my sound stopped working at all. Music won't even play on Banshee. I tried fixing this several ways with no luck. Now, my computer's sound output is stuck at "Dummy".
View 4 Replies View Relatedto play a song with amarok or banshee not heard all the words, hear the music but the lyrics only in parts.
View 7 Replies View RelatedI'm having some problems with banshee that started about 6 months ago. Banshee remains idle and does not play any type of music file. I've tried installing and selectively installing Gstreamer codecs with no success. I'm running stretch.
View 8 Replies View RelatedWhat is the terminal command to shuffle, or randomly play a song on banshee media player? I have already checked 'banshee.
View 2 Replies View RelatedI am wondering if any in the Ubuntu community owns a Carmen Car Radio player by Livio Radio. The program to save internet radio to the device is written in Java, however I am not able to run it either using WINE or using Open JDK.
The Carmen Player does work well with Banshee, it is the internet radio that is not working.
I have a new install of Karmic on my system with a flyvideo 3000 tv card installed. My problem is that it doesn't find any radio channels and the input channel is completely wrong. I don't have any sound on gnomeradio and can't find the config files to change the input channel. The only input option available to me is dig1 - can anyone point me in the right direction?
I have already read the Howto for this tv card and changed the device to radio0 in the setup. I have setup tvtime perfectly with sound channel as well as with a 5.1 surround configuration. I am missing my favourite radio channel. and I want to get rid of my windows installations once and for all! Update: I did a system update and some things have changed: the radio tower graphic on gnomeradio is now green (I assume it is getting a signal) but no sound yet.
I'm trying to get a "network device" (read Internet Radio) to play the BBC stations. Apparently they changed their format late last year, and the radio (using Frontier Silicon Wi-Fi Radio Portal - Member Login) can no longer play the streams ("Network error" message). I thought I would try manually setting something up, but it is not easy trying to find what the actual streams are, when everything is playing in the iPlayer.
Is there a Suse/Linux app that can identify streams coming in, when being played in iPlayer..
I have a desktop computer with a DVD drive in it.
I have two laptops, neither of which have a DVD drive, but all of them are on a wireless network at home.
I have the DVD drive shared across the laptops using NFS. (I can post the etc/exports and the fstab files if need be, but I don't think they are the problem).
Two days ago, I put a DVD in the desktop machine, fired up the first laptop (x61s), opened VLC on the laptop and watched the DVD fine across the network. Very good it all was too.
Yesterday, I tried exactly the same, and it failed. The DVD fails to open on VLC. It doesn't buffer, it doesn't show the length of the disk, it just goes back to the 'no media loaded' state.
It's doing the same now. If I run VLC from the command line, it gives the following:
Code:
The same thing happens from the other laptop (X31), and when I do the same I get this set of messages in the terminal:
Code:
This doesn't mean a lot to me, but it looks like there is some problem accessing the disk in the desktop machine. BUT it plays fine if I open VLC on the desktop machine, so it works that far.
The funny thing is that it worked across the network fine on the first laptop (x61s) a couple of days ago, and I don't think I have changed anything on either machine since then. (I suspect it worked fine on the second laptop - X31 - but don't recall trying it.)
this noob is generally *very* satisfied with Karmic since switching over from XP after a horrendous virus wiped out my laptop. My only problems have been with hardware devices. I'm so far unable to get Ubuntu 9.10 to play well with my iPod Classic. I *do* get an iPod icon on the desktop and can move files to it, but gtkpod will not mount it. Rythmbox sees it, but doesn't move files or playlists to it. The gtkpod 'howto' file says I should have the hotplug pkg installed, and I don't see it listed as installed OR available from Synaptic manager, and my web searches for it usually lead to a deadend 'not avail'. Sorry for the verbage. what I need to know is what files / pkgs need to be installed, how do I know if they are on my system, and where do I find them if they are not? I'm assuming my iPod is not mounted correctly but it could be another issue of course.
View 4 Replies View RelatedI currently have mplayer installed with the binary codecs in place, but it seems that mplayer is quite picky with which files it wants to play.
I have three files that are all mp4 h264 .mkv's. One of them is ~20 minutes long (720p) and mplayer seems to do just fine. Another is around ~90 minutes (1080p) and within seconds the audio gets out of sync. The third file is also around ~90 minutes long (1080p) and refuses to play at all, throwing a mess of:
[h264 @ 0x5fdbac0]AVC: Consumed only 1 bytes instead of 521
Error while decoding frame!
The machine is fairly old (Athlon 64 X2 4200+), but I don't think it's a hardware performance issue. When it was running Windows XP it could handle any HD video I threw at it. Each one of these files plays perfectly on my Windows machine with Media Player Classic Home Cinema + ffmpeg...
Is there something wrong with ffmpeg or is support for h264 just not there yet?
The radio station is located here
Click Here:
Then click to listen
But when it comes up there it does not play for some reason.
It was working fine with ubuntu 8.10 no problem at all.
What did I do wrong here ?
