Ubuntu Multimedia :: 9.10 Change Audio Driver To HD-ATI-SB (used In 9.04)?
Jan 11, 2010
This is my 2nd try with 9.10 and audio has this screeching thingie that its driving me crazy. I've been using both 8.10 and 9.04 with perfect sound and everytime I come into 9.10 I have this horrorific sound that no matter what I do I can't fix it. In a thread somebody suggested to change the audio channels from 5.1 to 7.1 (which made sense since my hardware really is 7.1). but there's no 7.1 option available.
When I do lspci -v... I can see that:
Code:
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK Computer Inc. Device 82fe
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at fe7f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
[Code]...
View 1 Replies
ADVERTISEMENT
Jan 18, 2009
In lmms there is no sound and it says:
No audio-driver working - falling back to dummy-audio-driver
in the command prompt. Sound works everywhere else just not lmms.
View 3 Replies
View Related
Nov 3, 2010
i use sony's nwz video walkman, earlier when i used windows xp it was very easy to change album art. When windows media player is playing certain music file i used to drag and drop some jpg file as album art and then transfer the file into my walkman; but now in rhythmbox if i drag and drop it changes the album art momentarily but when i transfer the music into walkman it doesn't show that album art.
View 9 Replies
View Related
Feb 20, 2010
I just had a quick question. I would like to burn a DVD to disc. The VOBs in the Video_TS folder have 3 Audio tracks: Stereo, Surround, Mono. By default it plays the Stereo track. Is there any way to change this? ffmpeg -i [insert_video_location] in the terminal gives me:
Code:
Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 720x480 [PAR 32:27 DAR 16:9], 9800 kb/s, 29.97 tbr, 90k tbn, 59.94 tbc
Stream #0.1[0x80]: Audio: ac3, 48000 Hz, stereo, s16, 384 kb/s
Stream #0.2[0x81]: Audio: ac3, 48000 Hz, 5.1, s16, 448 kb/s
Stream #0.3[0x82]: Audio: ac3, 48000 Hz, mono, s16, 96 kb/s
Will 0x80 always be the default? Normally this wouldn't be a problem, but I'm going to be playing these discs on a DVD Player without a remote (can't help it), so I won't be able to switch the audio on the fly, and they have no menus. You put it in, and it goes straight to the movie.
View 2 Replies
View Related
Nov 18, 2010
I'm looking for a way to change the balance of my audio in the terminal. (i.e. setting a different volume for the left and the right speaker).I can set the volume level for both channels at once with a command like:
Code:
pacmd set-sink-volume 1 32768
But I'd like to do something like
Code:
pacmd set-balance 1 -0.2
to shift the balance towards the left speaker.
View 1 Replies
View Related
Feb 19, 2010
I have just installed mplayer and everything seems to work fine until i try to go fullscreen. When i do, the actuall size of the video stays the same and the rest of the screen is filled with a black border. I have seen the main problem by many people, and the solution they all found was to change the driver from x11 to xv.
In my case however, the only driver working is x11. Anything else gives the following error Quote: Error opening/initializing the selected video_out (-vo) device This is also quite wired since the output of mplayer -vo help says that all the drivers are available.
View 3 Replies
View Related
Aug 29, 2010
where i can find a driver for Multimedia audio controller: nVidia Corporation nForce2 AC97 for Linux
View 5 Replies
View Related
Jun 29, 2015
-in Wheezy that exist: /etc/modprobe.d/alsa-base.conf
for edit audio device order (2 audio output).
-in Jessie not exist.
View 4 Replies
View Related
May 10, 2011
I have been using windows operating system for a long time now, but I am not well familiar with linux. Whenever I used to install Windows, I used to install the corresponding audio drivers(in order to listen to the music). The problem I am facing is that I do not know how to install the audio drivers(if they really exist in linux Mint 10 operating system). As a result I am not able to listen to any audio file due to lack of corresponding audio driver programs. make proper configurations settings so that I can listen to audio files in Linux Mint version 10.
View 4 Replies
View Related
Apr 29, 2011
What would be a nice, simple command to go through all files in a directory (no sub-directories), and change all the MP4 Video files I have to MP3 audio files (keeping the original filenames except for changing the "mp4" extension to "mp3")?
The files in question were videos taken with one of those Flip cameras, but I only need the audio off of it.
View 3 Replies
View Related
Oct 1, 2010
I have installed xubuntu 10.04 on a HP Pavilion dv1049ea and am having trouble installing the drivers for the graphics card. When installing i had to use the boot option -xforcevesa in order to get the screen working. Now that it is installed there is constant screen flicker but apart from that all other aspects of the system are working fine. In the display menu i am unable to change the refresh rate. How do i change the running driver from vesa to the correct intel driver? The graphics card is an Intel Graphics 82852/82855.
View 2 Replies
View Related
Jan 10, 2011
How I would capture on-screen audio AND my webcam audio at the same time.(My webcam seems to rely on pulse).
View 1 Replies
View Related
Jan 30, 2011
I want to listen to this audio file: [URL] but my real player 11.0.0.4028 gold desn play it, it says that there is a codec 28_8 missing, I go to relaplayer page, download the last release available for linux systems, but the message is the same : audio codec missing and doesn't play the audio.
I havev tried to play the audio with smplayer (not luck), vlc can play the audio but the pause button doesn't work so I have to listen the entire audio all the time I stop it playing. Is there any audio player capable od reproducing in the proper way this audio in ubuntu? No one of my video players totem, smplayer, realplayer or vlc are capable of playing this video: [URL]
View 9 Replies
View Related
Apr 9, 2011
What is available for ripping audio CDs besides Rhythymbox and Audio CD Extractor?
View 6 Replies
View Related
Oct 17, 2010
I'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
View 6 Replies
View Related
Jun 7, 2011
to start off, i'll post the specs of the machine:
dell inspiron e1505
3.2 gb ram
1.86 ghz intel core duo
ati x1400 gfx
opensuse 11.4 kde 32 bit.
okay, here are the details: can't play any audio with amarok when desktop effects are enabled because the minute a window is moved, it will distort the audio. even when disabling desktop effects, some applications still cause this. can't play videos videos even with desktop effects disabled because of the same reason.
i just switched from ubuntu and when i ran version 11.04, i had to disable kms to do anything. i tried on opensuse 11.4 and the audio was flawless but the gfx went all to hell.
View 3 Replies
View Related
Jun 1, 2010
I am having some issues with getting Ubuntu Studio 10.04 to work correctly on my system. Everything works fine except sound. I have a M-Audio Delta 66 audio interface and my onboard sound is disabled. When I run the command alsaconf I can see the ICE1712 card without issue. However when I run alsamixer the only option it is giving me is my HD sound from my ATI video card. For some reason it seems the ATI card has locked the audio to it with no way to remove it. I have reinstalled the alsa drivers for my card and can only see it through alsaconf. When I tell alsaconf to configure the ICE1712 card it says it configured it properly.When I run the command envy24control it says no ICE1712 cards were found.
View 9 Replies
View Related
Dec 22, 2010
Is there an application that anyone knows about that I can use to convert either an .flv or .ogg file that contains both audio and video to just an audio .ogg file (preferably vorbis+theora) without audacity? I'm fairly certain audacity could accomplish this but it seems like overkill for what I'm trying to do and the computer I'm trying to use does not run it so well.
::EDIT:: I should also mention that I've tried looking on google. I did find downloadhelper extension for firefox which uses ffmpeg to convert the files but I don't see any obvious way to strip the video.
View 2 Replies
View Related
Aug 28, 2010
How can i install Realtek HD Audio Driver??
I Downloaded The Driver From Realtek Website
http://img517.imageshack.us/i/20100827183305.png/
Then
http://img821.imageshack.us/i/98431356.png/
i dont know how to install this driver from this file
i want to use my Sound Card Features ( like Windows 7)
Ex.
http://smg.photobucket.com/albums/v1...ealtekHDMI.jpg
View 2 Replies
View Related
Jan 26, 2010
how I can use in my Kubuntu 9.10, audio codec - <voxware metasound audio codec>? P.S. Sorry for my bad english. I look forward to an answer,
View 7 Replies
View Related
May 28, 2010
I installed in my notebook the linux Ubuntu 9.04 64 bits and my audio not function. The notebook configuration is Pavilio DV4 1225tx.
What I need to make to function this driver?
View 6 Replies
View Related
Jun 7, 2011
i have already installed backtrack 4 RC2 in my netbook (asus eeepc 1005HA),, but i have no audio in my netbook. find my audio driver.
View 3 Replies
View Related
Sep 29, 2010
I"m running an online radio station and would like to run my headphone audio into my microphone or a virtual microphone, either way, I would like my audience to hear what I hear without having to hold the Mic to the speakers.
View 2 Replies
View Related
Jul 7, 2011
Currently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?
View 3 Replies
View Related
Jan 8, 2010
openSUSE 11.2 x86_64 (ADM64), KDE4 (everything is up to date) ...
As in the Subject, after the machine boots up and I'm logged in, there is no sound using local software (video or audio, such as VLC) or web-based (as in Pandora, ....., etc).
So I have to bring up Yast -> Hardware -> Sound, then Delete the current driver, then select "Add" to re-add it ... it detects the hardware fine, and sets up the sound driver, and I then get sound. However, when I shut down the machine and eventually fire the machine back up, no sound.
Driver: snd_intel8x0
Controller: CK804 AC'97 (onboard nVidia chipset)
I ran dmesg and saw nothing out of the ordinary. All appropriate files/entries exist in /etc/modprobe.d/
What can I do so that the driver is loaded at each startup?
I had a response out in alt.os.linux.suse who said the problem went away when they switched to GNOME ... so is this possibly a KDE issue? (I haven't tried restarting and running GNOME versuse KDE).
View 6 Replies
View Related
Jul 12, 2010
I bought an MSI Wind U135 Netbook. It came with Windows 7 Starter, so I installed Xubuntu and Enlightenment first thing. I have gotten everything to work except for the audio. It seems that there is an audio driver installed and in use (The Intel HD Audio driver), however, I can turn all channels up and nothing plays. The beep driver works, and if I turn the Microphone channels up too high then I get loud feedback from the speakers, but nothing else will play. I have tried multiple kernels, including from Ubuntu Netbook edition. All have the same problem. I was unable to determine what audio card is actually present in the machine, MSI's website is a pain, and I couldn't find anything conclusive online. I purchased the laptop in Taiwan, but I believe it is the same as the US version hardware-wise, except for the Chinese on the keyboard obviously.
View 3 Replies
View Related
Feb 11, 2010
I've installed both fluidsynth and qsynth, but get this error everytime I run qsynth. I'm trying to use my m-audio keyrig 49 just to practice playing the piano. I don't really care about having a whole DAW and whatever, I just want to play my keyboard. Maybe there is a better way than qsynth? Also, this happens:
Code:
/etc/rc.d/rc.alsa restart
Loading ALSA mixer settings: /usr/sbin/alsactl restore
No state is present for card K49
[code]....
I don't know that it has to do with my qsynth problem or not. I just thought I'd throw it in just in case it does. Also, xmms recognizes my keyboard in the alsa preferences, where the mixer device is.
View 11 Replies
View Related
Jul 13, 2010
When my system boots it hangs at
Code...
and hangs for another 120 seconds. In X11 I have no sound at all even after running alsaconf with no errors. My sound works perfectly in Ubuntu, so it's not a hardware problem. Are the two problems related or are they two separate things? Any help here would be hot.
View 10 Replies
View Related
Oct 12, 2010
Ubuntu insists on using movie player as the default for audio files. I would like to use VLC. VLC doesn't show up on the list as preferred applications for multimedia. I tried using custom with vlc %u but it doesn't work.
View 3 Replies
View Related
Feb 3, 2010
I received a DVD of my son playing hockey at the Verizon Center in DC. The accompanying audio only comes out of the right channel. I would like to modify it so the same audio comes out of both channels. I have already done some reauthoring (changed the aspect ratio from 4:3 to 16:9). How to modify/edit an AVI to fix my audio issue. Here is a copy of the video on .....: [URL]
View 9 Replies
View Related
