Ubuntu Multimedia :: 10.10 - No Sound From Line In

Nov 7, 2010

I was wondering if anyone else has my sound card and using Ubuntu 10.10? I downloaded alsa mixer and unmuted line-in, yet I still hear no sound.

View 1 Replies


ADVERTISEMENT

OpenSUSE Multimedia :: When Boot Up, (runlevel 3), Sound Is There Via The Mic/line-in Jack, But As Soon As KDE Starts, The Sound Cuts?

Jun 24, 2011

I recently bought a set of 2.1 speakers, all is fine. I like to listen to my DAB radio through them. When I boot up, (runlevel 3), sound is there via the mic/line-in jack, but as soon as KDE starts, the sound cuts. I can get it back by:~>alsamixerand then F6 and then scroll to mic, switching to ON and slider up to full and then mic boost up to 65% or so.Can I tell something in KDE to default to mic/line-in on?kmix does not give the full picture I see in other's posts, like here:ImageShack® - Online Photo and Video Hostingjust a single slider under each tab, like this:

View 9 Replies View Related

Ubuntu Multimedia :: Turned Login Sound Off With Command Line?

Jan 26, 2010

How do i turn it back on, I found a new login sound i want and i need to turn it back on.

View 4 Replies View Related

Ubuntu Multimedia :: Command Line For Gnome Sound Preferences?

May 4, 2010

Is there a way to control the gnome sound preferences widget via the command line? I use optical digital out (IEC95. It works fine. but everytime I reboot there is no sound, I have to go to sound preferences, hardware tab, select my internal audio device, change it from digital stereo duplex to analog surround 5.1, then back to digital stereo duplex, and then the sound works again. I would like to be able to do this via command line so I can write a little startup script and not have to do that every time i reboot.

View 4 Replies View Related

Ubuntu Multimedia :: No Line-in/mic Capture By Software, But Sound Plays Directly Through?

Mar 12, 2010

I have a problem with trying to capture sound through the input jacks on my computer. The sound plays through from the inputs to the output, and it's volume is controlled by alsa mixer, but no programs can pick up the stream, including the PulseAudio and Gnome Volume controls.I have tried many of the suggestions to be found in these forums for sound issues, including removing Pulse, configuring the model in alsa-base.conf, and messing with every setting I can find.Here are the outputs from the commands from the troubleshooting guides:

Code:
lspci -v | less
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio

[code]....

View 9 Replies View Related

Ubuntu Multimedia :: C-Media CM8738 Sound Card - Can't Record From Line-in

Jun 2, 2011

I run Kubuntu 11.04 and I have a C-Media CM8738 sound card. My problem is, my card won't record from the line-in jack, even when I set it to capture in alsamixer. Furthermore, the mic jack only records when both the line-in and the mic are set to capture in alsamixer. I'm using the same settings I used in 10.04, and the line-in captured fine then.

View 6 Replies View Related

OpenSUSE Multimedia :: Switch Sound Device From Command Line In KDE

Jan 30, 2010

my computer is connected to my TV through HDMI using ATI HDMI output. I have written a small script to switch display from monitor to TV when a want to watch a DVD, but I didn't find how to switch sound from speakers to HDMI in command line. For the moment I have to open KDE system settings -> Multimedia and move sound devices by hand.

View 3 Replies View Related

OpenSUSE Multimedia :: Cannot Capture Sound From Line In Input In 11.4 (no Pulseadio)?

May 18, 2011

I have been searching for an answer through most of the recent posts about sound issues but have not been able to find a solution. I am currently unable to capture sound from the "Line" input on my sound card. I do have sound and is working correctly for all applications and I do have P/A disabled (I'm not a huge fan of the sound quality with P/A enabled). I have checked and re-checked many settings but to no avail have not been able to capture sound. I'm sure I may be missing something or have not done something in order for this to work. I was using openSUSE 11.4 on a different pc and had no problems, unfortunately this is a different pc with a different sound card which is on-board so I am not entirely familiar with it yet.

It is a C-media CMI9880 which shows up as a Intel HDA (ICH6) and appears to be configured correctly.

View 9 Replies View Related

Debian Multimedia :: SOUND - Line In Works But Doesn't Appear In Gnome Setup

Jun 4, 2015

I am runnig Jessie with the default GNOME. Every thing has been perfectly smooth, but for the audio line in. First you should now the same hardware was working well with Wheezy. Then the hardware card is RealTek ALC887-VD and I am using the analogic part (both for in and out lines).

Below I will write some command results, but first, it seems important to describe the problem. I can hear the audio line in. If I blow in a mic, I definitelly hear the sound of it in the output. With alsamixer I can toggle the line in level and it works fine. By the way, with pavucontrol, it is the same I have access to the line in. but when I look in the Gnome setting for the sound, input, no card is available, then no volume setting is available.

--> as a result, I can't record the sound from the mic. it is sent directly to the output without been taken into account in the system. So no comment on video making, no skype …

On the web, the problem is always "no sound with this card" "No sound after upgrade to Jessie"… but Card is working fine but no seen on a upper level…

Code: Select allroot@Desktop:~# lsmod |grep snd
snd_hda_codec_realtek    67127  1
snd_hda_codec_generic    63142  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     45118  1
snd_hda_intel          26327  12

[Code].....

View 1 Replies View Related

General :: Getting Sound To Application From Sound Card Line-in/microphone?

May 7, 2010

I'm trying to use an application (e.g., mplayer) to play sound that comes in my sound card (via the mic jack). (What I'm really trying to do is sync a sports broadcast by putting a delay on AM audio, as described here. I'm stuck at the part where it says "this shouldn't be too difficult".) I've seen some hints that there might be code-heavy solutions using LADSPA or some JACK SDK, but there's just gotta be a simpler way. I'm hoping for something like

Code:

mplayer -delay -7 - < /dev/mic

but I'm darned if I can find it. I'm sure there are plenty of other sports fans who would find this useful for syncing radio with the digital TV feed...

View 2 Replies View Related

Ubuntu :: No Sound From Line In?

Sep 14, 2010

I'm using Ubuntu 10.04 and I can't get any sound from Line In. After checking Sound Preferences menu I can see from the "Input" tab that the correct input is selected and the Input level bar is moving. But no sound comes out.

View 9 Replies View Related

Ubuntu :: No Sound On Line-out Speakers Work

May 19, 2010

I just bought a new Dell Studio 15. It's not such an easy ride with Lucid apparently, the broadcom wireless driver sometimes fails, and there is no sign of any bluetooth on ubuntu.But the main annoyance at the moment is that no sound is coming through the line-out.

When I plug my headphones in, the speakers go silent as they are supposed to do. But I can't hear anything in my headphone. I do have two headphone-line-outs on this laptop, but it's the same effect on both.Does anyone have an idea? I searched the forum, tried installing gnome alsa mixer, but everything seems to be unmuted.

View 9 Replies View Related

Ubuntu Multimedia :: Unable To Hear Any Sound At All Using M-audio Delta 44 Sound-card

Jan 3, 2010

I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?

View 4 Replies View Related

Ubuntu Multimedia :: No Sound Coming From Creative Labs XiFi Sound Card

Dec 20, 2010

I have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.

View 8 Replies View Related

Ubuntu Multimedia :: Via Vt1708s Azalia No Sound When Starting Jack Sound Server?

Jun 7, 2011

After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.

I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.

I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.

Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?

Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server

if this helps, here is the error message received when jack does not start when the normal duplex option is selected.

21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused

[Code].....

also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.

View 4 Replies View Related

Ubuntu Multimedia :: Lucid 10.04 No Sound As Normal User / But Sound OK As Root

May 1, 2010

I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.

View 6 Replies View Related

Ubuntu Multimedia :: No Sound. How To Restore Default Sound Driver/settings

Jun 10, 2010

I have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,

$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l

[code]....

View 1 Replies View Related

Ubuntu Multimedia :: Get A 'snap-sound' In Computer Sound From Center Speaker

Nov 29, 2010

For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)

My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?

View 1 Replies View Related

Ubuntu Multimedia :: Sound Stops Working After 1-5 Mins Of Playing Sound?

Dec 14, 2010

Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.

Code:

lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002

[code]....

View 6 Replies View Related

Ubuntu Multimedia :: No Sound Output But Device Shows Up In Sound Prefs?

May 8, 2011

I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.

View 4 Replies View Related

Ubuntu Multimedia :: Tuner Card Not Feeding Sound Through Onboard Sound?

Aug 9, 2011

I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.

Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.

View 2 Replies View Related

Ubuntu Multimedia :: Change The Sound To The USB Headset (sound Output) The Webcam Does Not Work In Skype

Jun 21, 2010

I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04

1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.

View 3 Replies View Related

Ubuntu Multimedia :: No Sound Altough Alsa Mixer Seems To Indicate That Sound Card Works Properly

Nov 6, 2010

I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.

View 4 Replies View Related

Ubuntu Multimedia :: No Sound After Update - When Click Sound Option On Speaker Icon Get Nothing Listed Under Hardware

Feb 16, 2010

I recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.

I am using the HP DV2810 US notebook PC. With this being listed as the audio device.

I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.

Upgraded the following packages:

Installed the following packages:

View 5 Replies View Related

Ubuntu Multimedia :: Sound Drops From Hardware Tab Of Sound Prefs?

Mar 14, 2010

I just did a complete reinstall of my dualboot system hoping it was user error that caused my audio problems, but the issue has followed me to this install. This tells me that is probably application based.

my Via VT1708/A device tends to disappear from my system. it started shortly after setting up TVTime.When i restart the system my usb headset and vt1708 show up ok, but after a while the vt1708 will disappear and i can't get sound to pipe from the cd line to the usb headset. this makes watching tv a no joy situation.i checked my syslog and found this:

[Code]...

View 2 Replies View Related

Ubuntu Multimedia :: No Sound In Gnash - ALSA For Sound System

Mar 15, 2010

I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.

When I run Gnash in a terminal, I get this:

Quote:

View 5 Replies View Related

Ubuntu Multimedia :: Lost Sound And Sound Profiles After An Update

May 8, 2010

Under 10.04, I was using my sound card just fine, but after a system update,I lost all my sound profiles and my sound. I'm using my mobo's SPDIF ( I have an ASUS p7p55d).

View 1 Replies View Related

Ubuntu Multimedia :: No Sound / Phonon 'forgot' Sound Cards?

Aug 10, 2010

I recently had a brain cramp and told Phonon to forget my sound card(s). I have an on-board card and I have installed an old-school Sound Blaster CT-4832. I have followed the steps listed in the comprehensive sound trouble shooting, and still no luck!

Code:
gentle@Desktop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0

[Code]...

View 1 Replies View Related

Ubuntu Multimedia :: Sound Worked Fine With The Windows 7, But No Sound?

Sep 11, 2010

I have a new Dell XPS 9100 with 9GB ram and ATI Radeon HD 5770 1024MB GDDR5. I installed a dual boot with Windows 7 and Ubuntu 64bit. Sound worked fine withthe Windows 7, but no sound with Ubuntu. Did a reinstall with just Ubuntu 64 bit (wiping out the Windows 7). No sound.I first did:

System -> Administration->System Testing
(testing only for sound). I get:
0 [Intel ]: HDA-Intel - HDA Intel

[code]....

View 1 Replies View Related

Ubuntu Multimedia :: Jingly Sound Only In 5.1 Sound Configuration?

Mar 30, 2010

I have a Logitech X-540 5.1 surround sound system for my ubuntu 9.10 64 bit box. When I go into sound from System -> Preferences -> Sound, I set the onboard sound card to 5.1 Analog Output. When I do this, all the of the audio I listen to from Banshee and VLC has a light jingle to it, kind of like constant sleigh bells (they're definitely not supposed to be there.) However, when I change it to anything other than 5.1, say stereo, 5.0, 4.1, or 7.1 (I keep it on 7.1) it works just fine. I'm using ALSA to output sound, could this be the cause of this? I haven't found anyone else with the same problem online, so I'm not really sure what's going on.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved