I have a computer with XP & Ubuntu dual-boot. My arrangement is like this:Physical hard drive #1, (NTFS XP partition, ext3 Ubuntu partition)Physical hard drive #2, (NTFS documents partition)The Ubuntu partition is always mounted, but the other 2 have to be mounted every-time I boot up. How can I have these other 2 partition always be mounted
View 4 RepliesI've downloaded Fedora 12 and decided to try and install it on my old laptop which is currently running Ubuntu 9.10 with no problems.
When I boot from the live cd, it starts to load with the 3 bars on the bottom, one on top of the other, one is white, one is dark blue, the other is in between those colours in the spectrum somewhere....
Anyway, the load bars complete and "Fedora 12" turns white, then the following output populates:
mount: unknown filesystem type 'DM_Snapshot_Cow' (<----- repeated a bunch of times) can't mount root filesystem Boot has failed, sleeping forever.
Is SUBJ possible? For example: I have 1 disk with ext2 (ext3) partition and information written on it. I want to make a mirror using the disk. I put this one and another unformatted one into a server, create an appropriate /etc/raiddraive, and do mkraid. Shall I get a mirror witn intact information from the first disk? If not, are there any ways to do so?
View 1 Replies View RelatedI did a fresh install of 11.04. It didn't let me choose custom mount points for my disks, so I left non-system partitions unmounted in the installer. Big mistake. It seemingly screwed with two of my disks. I can see them in disk utility, but disk utility cannot identify partition information.
@fridge:~$ sudo mount /dev/sde1 /m2 -t ext4
mount: wrong fs type, bad option, bad superblock on /dev/sde1,
missing codepage or helper program, or other error
[code]....
I am triple booting Ubuntu 11.04, Win 7 and Win XP. Linux is on a separate EXT HDD, both Windows 7 and XP are on another NTFS HDD and all the work files etc. on a third NTFS HDD, all are SCSI disks.
When I start Ubuntu how do I make it automatically mount the NTFS disks? At the moment I only see the files on the Linux disc.
I`d like to know what happens when with the disks the we include in the installation process of Fedora 15.Obviously, the HD we choose to be the system is entirely formated and reconfigured. But what about the others?hat does happen to them? I`m asking this because I have included two brand new disks of 2 TB, one of them with 900.000 files and the other empty, both of them formated with ext4, and completely functional on Fedora 14.However, after the upgrade, in the very first Fedora 15 boot, these disks disapeared from "places", and could not be mounted even via terminal. Opening the Gnome Disk Utility, I found out they had been changed to VLM (instead of ext4) and that they also lost their original lable. I am starting to be concerned because all the data there was important to me.
View 3 Replies View Relatedi currently try to mount 4 internal sata disks using hal on a server installation?
i did
apt-get install hal and copied a .fdi script to /usr/share/hal/fdi/policy/10osvendor/30-storage-all.fdi
as far is i understand now i need a hal/dbus client
gnome-volumen-manager seems to be one
apt-get install gnome-volume-manager
now im stuck there is no such executable like gnome-volumen-manager thus, how does it work? how can i start it? how do i know if and why the .fdi script works or fails?
since its a server edition and its purpose should be a very minimized server install i dont want a GUI like gnome fully installed
After a motherboard crash I have a problem. i have a LVM2 partition that is placed on 2 different physical disks that i need to read. Since I am pretty new to Linux/Fedora a friend helped me to install the system on my old system so i am not sure if the disk is formatted as ext2,ext3 or xfs. How do I mount these 2 disks to be able to read the files? when i run fdisk -l I got:
[code]...
I'm having a problem with my usb disks, on opensuse 11.2. USB disks only mount the first time after booting.
The scenario is, I boot, then I plug a usb disk. It mounts properly and I can use it. After I unmount it and unplug the disk, I try to plug it in and it doesn't mount. And none of my other usb disks will mount as well.
The only workaround is to reboot.
I checked /var/log/messages, and the disk is being detected, it's just not being mounted.
When using usb disks, there seems to be a difference in how they are mounted, based on the filesystem type on the disk.Vfat disks are mounted read/write for users, while extN filesystems are not.While I can fix that for individual devices, I would like to find a general solution, so that any usb storage device with any filesystem is mounted read/write for users.
View 1 Replies View RelatedI know how to modify the /etc file to change permissions, but I don't think that it could apply to this:
I'm using my Ubuntu desktop to compile Linux From Scratch onto a Virtual Box disk image. I can make it mountable by using a vdfuse program I downloaded, but then I have to use sudo to mount the actual partition. I do not want to give another account the ability to use sudo.
p.s. does this only happen to certain distros, or is a part of the Linux kernel?
This question has been bugging me for a few days now: How do you mount, say, 3 HDDs to a single partition. From what I've heard, it's possible, but I'd like to know how. I'm running Crunchbang! Linux, based on Ubuntu, in case you're wondering.
View 11 Replies View Relatedhow do i mount extra harddrives...?
- After a hardrive crash which took out my opensuse 11.2, I installed three new harddrives instead of the old ones. I have installed xp. To see of I could triple boot, i thereafter put in linux mint. I did not like that and installed opensuse 11.3 - to ensure it would place itself on the two second harddrives (formatted in ntfs and with some data on) i before installation took those cables off.. And now alas.. there are no mount points.
So I tried yast, and found the partitioner, chose edit tried to put mount points .. however.. nothing seemed to have happened...
Finally got FC8 installed on new machine, and now it won't mount CDs/DVDs - didn't change anything in BIOS, CD/DVD drive is only thing on the IDE controller (HD is SATA) so is it likely a driver issue? FC8 seemed to have correct (or at least working) drivers for LAN, audio, SATA, etc.
View 1 Replies View Relatedmy grandfather uses a linux machine for web browsing, emails etc. So he mostly uses Firefox, Thunderbird and sometimes also Skype and now he has also Jabber account. Currently there is Pclinuxos 2009 installed (the newest one with KDE 3.5). I used a frozen community repository, but this also brings the problem I cannot update the used programs as I am afraid it would attempt to replace the old KDE as well.
I know I can update Mozilla apps by downloading a static rpm and install with KPackage or Konsole and similar with LibreOffice. Not much friendly... I also discussed switching to other WM - but GNOME surely not, maybe Xfce (other ones have other issues).
Is it possible to somehow make KDE4 to behave like KDE3.5 in some ways? At least auto-mounting of flash drives etc.
I installed openSUSE 11.4 on HP elitebook 2560p few days ago (using KDE live CD). In general system is working fine, but steel I cannot resolve couple of really annoying issues: 1. I've created encrypted partitions for swap and home during OS installation. As result the system keep asking for passwords for each of encrypted partitions before show login screen. That leads to situation when I have to type 3 passwords during each boot/reboot. I was using the same configuration (swap and home were encrypted) on Ubuntu 11.04 and there both encrypted partitions were mount automatically with no password typing after login to the system. Could you please tell how I can configure the same behavior on openSUSE 11.4 ?
2. I've enabled auto screen lock after 5 mins being inactive. As result when I going back to laptop and to unlock the screen the system shows login screen (default login screen with user selection). But when user and password filled in I click login it creates entire new KDE session. Therefore all staff that was open before screen lock is gone. However old session is still in the system (it appears in output from 'w' command).
As root, I can mount the /home directory from my desktop to my laptop which uses wireless. However, when I logout the mount disappears. That is, I mount the directory, check it is mounted, then I logout, log back in as root, the mount is now not there. How do I make the mount persistent, always there?
I want the mount to persist so that the two ordinary users on my small household network can access the same files whichever computer they use.
It appears that this may be because the wireless link disappears when I log out. Both machines are using Fedora 10. A persistent mount used to work using Febora 8, but maybe some settings I am not aware of have changed.
I have/had a PC with several hard drives, and a mix of ubuntu and windows on multi boot.The old boot drive died screaming, and I need to start again. (But my data is safe! yay!)
Is there anything special about which drive can be the main drive to start booting from? Or to put it another way, can I install to any of the other 3 and expect it to work, or do I need to switch them around so a different drive is on the connections for the recently dead one?
I have servers which contain SATA disks and SAS disks. I was testing the speed of writing on these servers and I recognized that SAS 10.000 disks much more slowly than the SATA 7200. What do you think about this slowness? What are the reasons of this slowness?
I am giving the below rates (values) which I took from my test (from my comparisons between SAS 10.000 and SATA 7200);
dd if=/dev/zero of=bigfile.txt bs=1024 count=1000000 when this comment was run in SAS disk server, I took this output(10.000 rpm)
(a new server,2 CPU 8 core and 8 gb ram)
1000000+0 records in
1000000+0 records out
1024000000 bytes (1.0 GB) copied, 12.9662 s, 79.0 MB/s (I have not used this server yet) (hw raid1)
[Code].....
I`d like to know what happens when with the disks the we include in the installation process of Fedora 15.Obviously, the HD we choose to be the system is entirely formated and reconfigured. But what about the others? What does happen to them? I`m asking this because I have included two brand new disks of 2 TB, one of them with 900.000 files and the other empty, both of them formated with ext4, and completely functional on Fedora 14. However, after the upgrade, in the very first Fedora 15 boot, these disks disapeared from "places", and could not be mounted even via terminal. Opening the Gnome Disk Utility, I found out they had been changed to VLM (instead of ext4) and that they also lost their original lable. I am starting to be concerned because all the data there was important to me.
View 14 Replies View RelatedAm I the only person who can't get ubuntu one working properly?1) if I right-click a folder and ask to synchronize it to ubuntu one, there is absolutely no feedback at all (nothing seems to be synchronized, no icons are added to the folder, no progress bar, nothing).2) if I open the Ubuntu one preferences, it states "synchronizing in progress", and it keeps doing that. again; no progress, no icons, no nothing.Disconnecting reconnecting doesn't seem to matter.Rebooting (I know, I was desperate..) doesn't seem to matter.How do you guys manage to use this. I mean, the interface of ubuntu one is pretty clean, so there is not much to configure, which is good, if it would work out of the box .
View 1 Replies View RelatedI have a shared network folder on my server called torrents. It is a folder that I drop .torrent files into to start automatic downloading. When I navigated there from my Ubuntu PC (10.4) I was provided a nice shortcut on my desktop. I have no idea when the problem started but after I rebooted and logged in I noticed a "thing" on my desktop.
torrents on peter.volume <- peter is my server name. Places -> x-nautilus-desktop:///torrents on peter.volume <-also showing up.
I cannot delete I get The file is an unkown type.
Now if I navigate Places -> Network -> Peter (server) I can see the folder "torrents" If I click the folder to open I get a never ending number of "starting file manager" windows.
The other folders work just fine, its just this one.
Recently my keyboard began malfunctioning.I know that this is a hardware problem, as the keyboard was tested on two different computers.I was wondering if anyone here knows what to do.I know this is a forum for Ubuntu troubles, but I don't know where else to ask.This is really troublesome because the computer the keyboard is hooked up to only has ports for a usb keyboard.Unfortunately the only other usb keyboard in the house is in use by another person.I can't use an on-screen keyboard forever.
View 1 Replies View RelatedI'm running 9.1 and Firefox 3.5.7 with a few addons (better privacy, ghostery, cookieculler, adblock, personas) on a HP 8710p laptop with 4gb of ram.I use it to browse the internet at work, and I have it up for about 8-9 hours every day, during the course of the day I will open and close tons of tabs. At the end of the day when I'm getting ready to leave, I close out of firefox, and it takes one of my duo core processors all the way to 100% and sit at the top of my processes in my Conky for 5-10 minutes before it finally closes. I've been googling for a couple days and have yet to come up with anything,
View 3 Replies View RelatedI've created a new environment variable and updated another one (PATH). I just want to save this changes once after reboot and forever. This is because I want to run a program (tecplot) just typing 'tec360' in the command line. If I create those new variable ( TEC_360_2008=/usr/tec360_2008 ) and update the PATH variable ( export PATH=$PATH:$TEC_360_2008/bin ) then bash detect the command 'tec360' and it runs my program. The problem is that this changes are not saved after rebooting.
According to the manual, I have to update the .bash_profile in my home directory but I don't have this file in this directory (neither in other directory). I only have .bash_history, .bash_logout and .bashrc in the home directory. I have updated .bashrc (typing . ./.bashrc) but it is not working.
I stream my local police station dispatch on the web using an icecast/darkice configuration [URL]. The downside of using this software is that once you initiate darkice, a terminal has to be open - the process does not run in the background.
I tried placing a monitor on my server (ouch, that hurt) and keeping darkice alive that way, but my mail server kicks the process. Now, I set the KeepAlive variable to something outrageous and keep an ssh session open on my desktop box to keep the stream going. Screen does not work as Postfix boots that as well.
keeping the process going indefinately?
maximising, minimising or simply changing the size of a window takes ages and the whole system appears to freeze for a few seconds. system monitor registers a cpu load spike.
don't say "disable compiz", i need the cube ...
using a ati mobility radeon HD 2400.
I am a newbie to Linux, and so just installed Ubuntu.. for the first week all was fantastic, but now, everything has slowed down. It seems to run fine for a few minutes and then everything slows down. I try and drag a window or open a menu, type, anything, and it takes forever! Also the internet seems to stop working on a regular basis. I have checked processes to see if there was anything happening and one of the processors was sitting at 100%, but no actual processes in the list seemed to be using any processing power at all!
View 8 Replies View RelatedI am attempting to install 10.10 from a usb stick after a disc installation failed, but it is taking forever. I am stuck on the screen which says 'Ubuntu 10.10' and has four little orange dots flashing as if it is loading. It has been like this for over 20 minutes now. Is this unusual or is it normal? Anyway, I am restarting my PC and trying again.
View 1 Replies View RelatedI am running 10.10 and using Banshee. When I go to sync my Ipod Touch 3rd Gen (8GB), it syncs fine in Banshee or appears to but on my iPod, it still shows the "Sync in Progress" for hours afterward. If I cancel the sync from my iPod, some of the music won't show up.
View 1 Replies View Related