I am triple booting Ubuntu 11.04, Win 7 and Win XP. Linux is on a separate EXT HDD, both Windows 7 and XP are on another NTFS HDD and all the work files etc. on a third NTFS HDD, all are SCSI disks.
When I start Ubuntu how do I make it automatically mount the NTFS disks? At the moment I only see the files on the Linux disc.
Can mount.ntfs and mount.ntfs-3g reside simultaneously?
Whilst accessing an external NTFS drive mount.ntfs takes up a lot of CPU. I am not sure if its mounting the drive using mount.ntfs or mount.ntfs-3g? How do I find out and if they coexist how do I make the default mount drive ntfs-3g?
I've a clean installation of Ubuntu 11.04 (AMD64) and i'm having problems with automount ntfs partitions/disks.
[Code]....
I want to enable Advanced NTFS-3G support (permissions and users) automatically from the fstab entry.
View 1 Replies View RelatedFedora 12 seems to have made all my ntfs disks and partitions into LVM Linux (whatever that is) In all the time i've used other distros I've never seen this before .... I m getting them back to original state and accessable again, but have no idea what to do.....
[Code]....
I need help with:
1. get them back to original partition system
2. get them mountable
A question though, the information/files i had on these drives/partitions is it lost ? or is it still there?
How and when it happened I do not know. But some days ago I tried to copy some files from my NTFS disk and I cant. The disk is empty (really it is not). I have 3 NTFS disks on my system and one with Suse on it. Until now I could normally access all my disks. Now I can access them but there are no files/directories on any one of them (as seen from SUSE).And in my fstab there are entries which I do not know how they come there. Here is my fstab file:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]....
I installed Fedora on a VMWare, hosting OS is Windows 7
How can I access Disks and NTFS Partitions on the Host OS "Windows 7"
From Fedora?
I am trying to setup fstab to automatically mount my NTFS partitions. I have used various Mount managers to create the entries in fstab. The fstab seems fine, but when mounting at boot or even via Nautilus I get the error message that I do not have permission to mount the disk.
1) Can this permission be set in the fstab file? If so what is the syntax of the fstab entry?
2) If not, is there a tool i.e. GUI to set the mount permissions?
About dual boot system with winxp and lenny.
Storage information:
1st primary:SG 160G ATA 100
1st secondary:WD 160 ATA 133
SATA:WD 1000
2nd primary:DVD
2nd secondary:DVD±RW
Winxp in 1st primary.I did a fresh install of lenny on 1st secondary.
info about lenny setup:
1.Partition list:/boot,/,/home,swap
2.Every partition is XFS except swap.
At the end of installion,lenny installed grub on (hd0) that is 1st primary.
Everything seems OK.Lenny runs OK.
But when I switch back to windows xp,the diskmgmt can not detect hdd's info and the system meets a problem of shutting down.
After many times of trying.
I solved the problem by the following way.
1.Boot with windows xp's install CD and use fixmbr on (hd0).
2.Boot with lenny's install DVD , do a grub>root (1,0)>setup (hd1)
After that,edit /boot/grub/menu.lst and change (hd0,0) to (hd1,0) and also (hd1,0) to (hd0,0).
3.Reboot and Press F8 for a boot menu then I can select which disk to boot.
windows boot from 1st primary's mbr,lenny boot from lenny's grub.
The problem is caused by a bug between GRUB and windows' mbr and maybe more about GRUB and XFS.
I did a fresh install of 11.04. It didn't let me choose custom mount points for my disks, so I left non-system partitions unmounted in the installer. Big mistake. It seemingly screwed with two of my disks. I can see them in disk utility, but disk utility cannot identify partition information.
@fridge:~$ sudo mount /dev/sde1 /m2 -t ext4
mount: wrong fs type, bad option, bad superblock on /dev/sde1,
missing codepage or helper program, or other error
[code]....
I'm running into problems adding the required schema for automount and ldap on Centos 5.6 (also tried Centos 5.3)In the last few days I was able to setup LDAP server and get client authentication working. I want to be able to automatically mount users home folders on logon and store the configuration in ldap.I've done the following so far
1) added include in /etc/openldap/slapd.conf to /etc/openldap/schema/redhat/autofs.schema
# See slapd.conf(5) for details on configuration options.
# This file should NOT be world readable.
#
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
include /etc/openldap/schema/redhat/autofs.schema
Our system is based on RH4 and is using pam_tally and faillog to record failed attempts and to lock users out after 5 attempts. We have a requirement to provide a normal (non-root) user logging onto our system, with information regarding the number of failed logon attempts made on their account before the current successful logon (similar to the functionality provided by HP Protect Tools on Windows). My first idea was to add 'faillog -u $USER' to the bashrc, however by the time the bashrc is run - the user has been successfully authenticated and the faillog has been reset back to zero.
View 5 Replies View RelatedI have a computer with XP & Ubuntu dual-boot. My arrangement is like this:Physical hard drive #1, (NTFS XP partition, ext3 Ubuntu partition)Physical hard drive #2, (NTFS documents partition)The Ubuntu partition is always mounted, but the other 2 have to be mounted every-time I boot up. How can I have these other 2 partition always be mounted
View 4 Replies View RelatedI`d like to know what happens when with the disks the we include in the installation process of Fedora 15.Obviously, the HD we choose to be the system is entirely formated and reconfigured. But what about the others?hat does happen to them? I`m asking this because I have included two brand new disks of 2 TB, one of them with 900.000 files and the other empty, both of them formated with ext4, and completely functional on Fedora 14.However, after the upgrade, in the very first Fedora 15 boot, these disks disapeared from "places", and could not be mounted even via terminal. Opening the Gnome Disk Utility, I found out they had been changed to VLM (instead of ext4) and that they also lost their original lable. I am starting to be concerned because all the data there was important to me.
View 3 Replies View Relatedi currently try to mount 4 internal sata disks using hal on a server installation?
i did
apt-get install hal and copied a .fdi script to /usr/share/hal/fdi/policy/10osvendor/30-storage-all.fdi
as far is i understand now i need a hal/dbus client
gnome-volumen-manager seems to be one
apt-get install gnome-volume-manager
now im stuck there is no such executable like gnome-volumen-manager thus, how does it work? how can i start it? how do i know if and why the .fdi script works or fails?
since its a server edition and its purpose should be a very minimized server install i dont want a GUI like gnome fully installed
After a motherboard crash I have a problem. i have a LVM2 partition that is placed on 2 different physical disks that i need to read. Since I am pretty new to Linux/Fedora a friend helped me to install the system on my old system so i am not sure if the disk is formatted as ext2,ext3 or xfs. How do I mount these 2 disks to be able to read the files? when i run fdisk -l I got:
[code]...
I'm having a problem with my usb disks, on opensuse 11.2. USB disks only mount the first time after booting.
The scenario is, I boot, then I plug a usb disk. It mounts properly and I can use it. After I unmount it and unplug the disk, I try to plug it in and it doesn't mount. And none of my other usb disks will mount as well.
The only workaround is to reboot.
I checked /var/log/messages, and the disk is being detected, it's just not being mounted.
When using usb disks, there seems to be a difference in how they are mounted, based on the filesystem type on the disk.Vfat disks are mounted read/write for users, while extN filesystems are not.While I can fix that for individual devices, I would like to find a general solution, so that any usb storage device with any filesystem is mounted read/write for users.
View 1 Replies View RelatedI know how to modify the /etc file to change permissions, but I don't think that it could apply to this:
I'm using my Ubuntu desktop to compile Linux From Scratch onto a Virtual Box disk image. I can make it mountable by using a vdfuse program I downloaded, but then I have to use sudo to mount the actual partition. I do not want to give another account the ability to use sudo.
p.s. does this only happen to certain distros, or is a part of the Linux kernel?
This question has been bugging me for a few days now: How do you mount, say, 3 HDDs to a single partition. From what I've heard, it's possible, but I'd like to know how. I'm running Crunchbang! Linux, based on Ubuntu, in case you're wondering.
View 11 Replies View Relatedhow do i mount extra harddrives...?
- After a hardrive crash which took out my opensuse 11.2, I installed three new harddrives instead of the old ones. I have installed xp. To see of I could triple boot, i thereafter put in linux mint. I did not like that and installed opensuse 11.3 - to ensure it would place itself on the two second harddrives (formatted in ntfs and with some data on) i before installation took those cables off.. And now alas.. there are no mount points.
So I tried yast, and found the partitioner, chose edit tried to put mount points .. however.. nothing seemed to have happened...
Finally got FC8 installed on new machine, and now it won't mount CDs/DVDs - didn't change anything in BIOS, CD/DVD drive is only thing on the IDE controller (HD is SATA) so is it likely a driver issue? FC8 seemed to have correct (or at least working) drivers for LAN, audio, SATA, etc.
View 1 Replies View Relatedmy grandfather uses a linux machine for web browsing, emails etc. So he mostly uses Firefox, Thunderbird and sometimes also Skype and now he has also Jabber account. Currently there is Pclinuxos 2009 installed (the newest one with KDE 3.5). I used a frozen community repository, but this also brings the problem I cannot update the used programs as I am afraid it would attempt to replace the old KDE as well.
I know I can update Mozilla apps by downloading a static rpm and install with KPackage or Konsole and similar with LibreOffice. Not much friendly... I also discussed switching to other WM - but GNOME surely not, maybe Xfce (other ones have other issues).
Is it possible to somehow make KDE4 to behave like KDE3.5 in some ways? At least auto-mounting of flash drives etc.
ubuntu 9.10 when I try to mount internal drivereceive the following massage Error mounting: mount exited with exit code 1: helper failed with:Remounting is not supported at present. You have to umount volume and then mount it once again
View 9 Replies View Relatedi have an ntfs partition that i want to mount. before 10.4, all i had to do was add:
Code:
/dev/sdb2/media/Sharentfs-3guser,auto,locale=en_US.utf800
to the fstab, and it would be mounted on startup, but now i can't do that. when i try to
[code]....
I tried
Code:
sudo mount /dev/sda2
but it doesn't work. i tried
Code:
sudo mount device /dev/sda2
, nope. what are the commands?
I tried few command to mount NTFS system that I know works....but mount LVM with NTFS like this absolutely failed me....
Commands that I tried...
Code:
mount -o loop,offset=32256 /dev/storage/games /windows
mount -o loop,offset=32256 /dev/storage/games5 /windows
mount -t ntfs-3g /dev/storage/games /windows
mount -t ntfs-3g /dev/storage/games5 /windows
[Code]....
Recently installed ubuntu 10.10 and rather like it but been trying to setup and configure everything so its a feasible alternate OS.
I have a problem where one of my hard drives doesnt show up in places.
The drive works fine in windows.
The information provided to me by Disk Utility says:
Model: ATA WDC WD 10EADS-00L5B1
Partitioning: Master Boot Record
Device: /dev/sdb
Partition Type: HPFS/NTFS (0x07)
Now i have a total of 4 drives, windows 7 on one, linux on one, and 2 storage. Linux recognizes my main windows drive and my 2 TB storage drive, but not this one for some reason. I assume it has to do with the partition type? Disk utility just shows its parition bar image as 'unknown' so yeah. Now there is one error during boot related to this but i can't read it fast enough to remember it all, all i see is the sdb label real quick.
We have a VMware box that is connected to a Thecus. The Thecus FTPS the WMware virtual machines onto a PC which has a 2TB drive.
We are trying to see if we can get the FTP'd VMware Virtual machines to run on another WMware node.
However Vmware use's NFS so we can't mount the drive as it's NTFS.
We are attempting to mount the NTFS drive in ubuntu. Can this be done and can it be turned into a NFS share without formatting the drive.
im looking for a command for mounting an ntfs partition. what i want to do is to put that command to the "after startup applications" option. that's because that ntfs partition is my storage partition, i play steam games [win7 dualboot, thats why that partition is ntfs], download movies etc. in my places menu, its called 190GB Filesystem, and when i click it, it mounts up. but that means i have to click it everytime i boot up, because vuze can't locate the files if it isnt mounted.
by the way : /media/7C1EE4E21EE49684 when its mounted