I am running 10.10 and using Banshee. When I go to sync my Ipod Touch 3rd Gen (8GB), it syncs fine in Banshee or appears to but on my iPod, it still shows the "Sync in Progress" for hours afterward. If I cancel the sync from my iPod, some of the music won't show up.
View 1 RepliesI'm using kubuntu 9.10 and I know there was a thread a while back about someone having the same problem with ubuntu. Unfortunately I can't get the ubuntu solution to work with kubuntu
View 1 Replies View Relatedafter upgrading to Ubuntu 9.10 banshee does not see my Ipod anymore, which is a nano video 3g one. Rhythmbox works though, gtkpod not. I thought I had to install libgpod-dev and libgpod2, but the second library is not available anymore in synaptic. I have installed libgpod4, libgpod-common, -dev.
View 3 Replies View Relatedafter upgrading to Karmic I started having problems with ipod and banshee.I have found out this a known problem. You can check it at the banshee siteQuote:There is a known issue with iPod not being recognized by Banshee on openSUSE 11.2 and Ubuntu Karmic.mainly because of switching from HAL to device kits, as done with Ubuntu Karmic 9.10. Related bug is #586508 "Underlying distros moving from HAL to DeviceKit breaks Podsleuthslity to mount device"More details are available atAt the timehis writing a possible workaround is reported to be the following:Quote:[...]all I would have to do is disconnect the ipod andmake sure that banshee is closed. Then open up terminal and run
Code:
killall -9 nautilus
Then plug in the iPod and wait about 30 seconds, then run nautilus again by hitting Alt+F2. After I ran this and opened up banshee my iPod worked like a charm
I am trying to get working properly with Ubuntu. Currently I am trying to get it to work with Banshee.Originally, my girlfriend connected it to iTunes running under Windows, and configured it and loaded music, photos and podcasts onto it. Unfortunately for her, the Windows machine had a hardware failure, and there is no other PC running real Windows for her to use. I have some Windows Virtual Machines on my Ubuntu server, but there are known problems passing through the iPod USB connection to a KVM Virtual Machine.
I tried iTunes under Wine (using the PlayOnLinux software to install and configure), but that also doesn't work (also apparently a known problem).So I am left with getting the iPod working with real native Ubuntu software. I tried Rhythmbox, but that doesn't seem to support writing to an iPod. Then I tried Banshee, which claims to be able to do it all.Banshee can connect to the iPod, and I can load music and videos onto the iPod, but:Banshee cannot see any of the music already on the iPod (loaded with ITunes),The iPod cannot see any of the files (music or video, nor any new Playlists) loaded by Banshee. The files are there (I can see them by browsing the iPod device with Nautilus), and they are certainly taking up storage space, but they do not show up when using the iPod directly.It is as if there are 2 iPods: the real iPod, and a virtual iPod accessed by Banshee.
I am running Banshee 1.6 Beta 3 (1.5.2), on Jaunty (9.04).When I first connected the iPod to Banshee it told me that, because the device had been used with a new version of iTunes, the media catalogue would have to be rebuilt, to which I agreed. I am starting to suspect that there are now 2 media catalogues on the iPod, one being used by Banshee, and the other by the iPod iteslf.
Banshee will recognize iPod shuffle 4th gen. It will let me drag songs to iPod and they show up in Banshee as being on my iPod. When I disconnect iPod and hit play, the voice over tells me to please load songs from iTunes.
View 5 Replies View RelatedWhen I first plugged my ipod in, it said that it was too new to read, so I ran the update with banshee. Now it shows all of the files, but whenever I try to add or remove a file from my ipod, it say that it's preparing to synchronize, but just sits there. How to make it actually sync?
View 5 Replies View RelatedI've been using banshee for a couple weeks. And it's worked great up until now. This happened one other time, and I reinstalled ubuntu, and it worked fine. Now it's not working again. What's happening is, I plug my ipod in, and banshee recognizes it. But when I try to put music onto it, it says it's syncing, and then I disconnect, and the music isn't on there. I updated podsleuth, but that didn't seem to help.
View 1 Replies View Related(New thread due to significant change in info)5th gen iPod is recognized, but will not load files into banshee. It is the latest version of banshee. My ipod (named SON2) shows up in the menu, but when selected it hangs on "Loading SON2" and showing that it's busy...but this goes on without end, no files ever get loaded. Also, banshee doesn't recognize any music or video on the ipod, only "other". Steps taken so far:- A complete removal and reinstallation of banshee has had no effect.- Installed latest version of podsleuth, no effect- Previous had "automount" in nautilus preferences unchecked, rechecked - no effectPossible signs of danger:Running Banshee from Terminal output (CLICK HERE FOR NOPASTE OUTPUT)- skipping my song errors, at the bottom 4 warnings occur, followed by a number of failures which I don't understand
View 9 Replies View RelatedI've started using Banshee to sync my ipod lately. There are a few issues with it that I can bear - having to killall natutilus every time I reconnect my ipod being one. But I'm getting a bit peeved with Banshee being apparently incapable of syncing my album artwork correctly. It downloads the correct artwork perfectly within banshee, but at the minute about half the albums on my ipod have REM Monster cover art beside them. Is there any way I can force Banshee to reset the artwork?
View 1 Replies View RelatedI use Banshee 1.5.4 on Ubuntu 9.10 with a 2nd gen iPod Shuffle. I was thrilled when I plugged it in to see that everything worked right out-of-the-box but then I found that there's no way to manually order songs, Banshee always put an arrow in a column for you.
If you don't know much about the Shuffle, it lets you flick between 'sorted' and 'shuffled' mode. In sorted mode it plays songs in the order they are arranged in the music playlist. I like to keep classical and relaxing songs at the top of my playlist for when I can't sleep but Banshee won't let me manually organise my songs so I can't do this.
Peculiarly, when you drag songs to the Shuffle individually, though they will show up as being sorted, when you go to play them on the Shuffle they play in the order in which you dragged them. I was planning to just drag and drop over each song individually but I think there must be an easier way... I'm probably just missing something. P.S. Here's a screenshot to clarify. I synched the songs over in the order of Blur, Gorillaz, Air and Muse but they don't show as such
I really, really like Banshee and I really, really don't want to use gtkpod or rythmbox
Overview:I have a 5th gen video ipod which I'm trying to load onto my banshee.I was able to do this in the past, but since the upgrade to 10.04 (WHICH IS AWESOME!!) I've been S.O.L. Previously, I had to change some settings in order to get the ipod to sync w banshee, and I'm wondering if that's why I'm blocking it's native ability to sync. I'm trying to remember what changes I've made,but it's been awhile...
Breakdown: - in order to mount the iPod, I have to go to Places>Ipod and select it from the list
- I then open banshee, and the ipod is recognized in my menu
- when I go to load it, it says "loading ipod", which goes indefinitely and never ends...
- in addition, it does not recognize any music/video is on my ipod - only 11.9gb of "other"
...and that's it. I would love to load my new music
A friend of mine has a 1st generation iPod touch, and wants to switch completely to linux, but is concerned how the songs currently on his iPod will be handled when he switches. He has many songs that are only on the iPod; he has purchased them from the iTunes store directly on the device, not through iTunes on his computer.
When he syncs his iPod with Banshee, will Banshee merely copy the songs onto his linux partition? Is there any chance that Banshee will remove the songs from his iPod? He obviously dosen't want to lose any of his music. A slightly lesser concern as well... will Banshee be able to play these protected files?
I recently installed Banshee and would like to set it as my default music player. Currently, when I plug in my iPod, Rythmbox auto loads and then Banshee cannot access the device. Is there a way to go about changing this setup so when I plug in the iPod, it's Banshee that loads it and not Rythmbox?
View 4 Replies View RelatedWindows failed on me, so I've swapped to Ubuntu 10.04, and I'm having issues with the media players.
Rhythmbox was reading old ID3 tags, meaning all my music collection appeared messed up since I had apparently only been editing the newer tags in iTunes when I was on Windows. I tried using EasyTAG but then as soon as I loaded the music in Rhythmbox, it would just revert back to the old useless tags again.
I read around, and Banshee came highly recommended (so did Amarok, but that runs awful for me. :/) and I really like the layout and general appearance of Banshee, and it doesn't seem to screw with the file names or anything like Rhythmbox was doing, but my iPod does not appear at all.
It's a fairly new 160GB Classic iPod. Rhythmbox detects and edits files in it fine. Hipo iPod Management Tool does not detect it either.
Everything worked fine with my IPOD for more than a year. Since a particular event of which I have no idea, I cannot see it anymore (in Banshee or Nautilus). However the IPOD does display "connected" on its screen.
View 2 Replies View RelatedI want to listen to my iPod Touch 4g using Banshee, connecting is not a problem, my problem is that all the songs are protected so when one song is done it just stays there idle it doesn't play any other songs. Is there a way to unprotect them so I can listen to them w/o worrying about it turning idle?
View 8 Replies View RelatedWhen I am playing music from my iphone through rhythmbox the iphone syncs at the beginning of every song. I dont know why it would need to do that? I have taken a look at settings and nothing really related.
View 3 Replies View RelatedI am running banshee-1.5.3-1.fc12.i686 on FC12 X64. Although the Banshee iPod plugin is checked off, when I plug an iPod in, I do not get the iPod icon on the left pane of Banshee. (gktpod works fine with my iPod.) How do I fix this?
View 7 Replies View RelatedI have an iPod Classic 6th Gen and am using Banshee for my music needs, however Banshee is not picking up my iPod. When I connect the iPod via my USB Cable, it is visible in the File Browser, and mounted to the Desktop. Banshee just isn't picking it up!
View 9 Replies View RelatedI have a 3rd gen iPod shuffle which I had loaded music onto in Banshee a few months ago. It worked fine until yesterday when I decided I wanted to delete a few tracks from it. When I mounted it and opened Banshee it said I had to rebuild the database or something to that effect. I did that and could then see all the tracks on it. I went ahead and deleted the few tracks I wanted to remove, and ejected it. When I tried to use it, it says "please use itunes to sync music." A little confused, I went back and deleted all the tracks on it (using Banshee) and reloaded some tracks. It still won't work.
I haven't changed anything in Banshee (as far as I know) and I have never plugged the shuffle into itunes. I've always used Banshee to manage it and never had a problem. The only major change I can think of that might have made a difference is upgrading from Ubuntu 9.10 to 10.04.
I've just installed openSUSE 11.2 (with Gnome). Everything works fine except the Ipod support in Banshee (Ver. 1.6 Beta 2).
When I connect my Ipod Video 30GB to my Computer it is recognised in openSUSE and also a new Nautilus windows with the Ipod content is opened. But in Banshee there is no Ipod button or anything else which allows me to sync my music with Ipod.
I've already tried to delete the /home/{user}/.config/banshee-1 folder and installed the banshee-1-dmp-ipod package. The Ipod plugin (Ver. 1.0) is also installed in Banshee.
Had issues when 9.10 first came out with Banshee not recognizing my MP3 Player (iPod or Sanza). So, I went back to 9.04 as my music is very important. I decided to upgrade recently again to 9.10 and still having issues. Two things:
1. If I start Banshee and then attach my Sanza player, it pretty much kills Banshee. Screen goes dark and I have to kill it. It seems as if I connect my player first, then start Banshee, it picks it up and all looks good. Easy enough to do it this way, but just curious on it.
2. The Banshee is an 8GB and also has an 8GB SD card. In 9.04, this would show up in Banshee as two devices when connected so that I could copy music to/from either the native drive or the SD Card. Now, even when it connects as noted in #1, I only see the native 8GB on the Sanza... there is no SD Card listed, no ability to get to it, and neither of them show up on my desktop (in 9.04, they both showed up on desktop and in Banshee).
I am totally open to getting off the iPod... went out and bought the Sanza (which I love) specifically because of Ubuntu, open formats (ogg), etc. But, haven't been able to use it fully as I would like.
I downloaded banshee because i knew that could put movies on my ipod, but everytime i run banshee my ipod doesn't show up. i tried started it, then plugging it in and still didnt show up. Anyone knows what the problem is?
View 8 Replies View RelatedAfter finally being able to mount my iPod Touch (8gb, jailbroken on iOS 4.0) with iFuse, I can only sync using gtkpod. This a horrible music syncing application and deserves to be punched in the forehead. I was wondering how to get Banshee to recognise my iPod. I'm on 11.3.
View 4 Replies View RelatedI am trying to connect my 2nd Gen Ipod to Xubuntu and import my music collection onto the Ipod. I am having real problems with this. Rhythm Box does not recognise the Ipod with the plug-in, I have tried Amarok, but each time I tried to open it, it just crashed, tried sending a bug report but that did not want to work. I have also tried Exaile with the Ipod plug-in but when you go to the device manager you can click on the Ipod but nothing happens. I have tried looking at the Exaile forums but this seems to be a problem for others as well. The Ipod mounts ok, now a bit stuck.
View 1 Replies View RelatedIts a dell e510 with about a gig of ram. I'm struggling to get my ipod touch working with the gtkpod ipod manager. At this point my ipod shows on my desktop when i connect it via usb. I cannot set up the repository for it in gtkpod because i dont know the location its mounting to. if its mounting at all. so my question is. how can i tell where my ipod is being mounted? I dont have a clue what to look for in the terminal results for "df -a"
But this is what i get:
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 152357444 65577992 79040140 46% /
proc 0 0 0 - /proc
none 0 0 0 - /sys
[Code]...
Edit : Itouch = first generation 8gb Edit 2: I would like to create a sticky thread that helps new users answer questions about ipods. Will a moderator please let me know what i should include in their opinion? ex. using wine to run itunes, gtkpod and how to set it up, using mm players like banshee and songbird... what version of ubuntu works best with the ipods.
I've been trying to get my iPod touch (8GB, jailbroken) to connect with gtkpod iPod manager. But whenever I try to load the iPod I get this message.
Quote:
iPod Database Import Failed: 'illegal seek offset 0 (length 4) in file '/media/ipod/test/iPod_Control/iTunes/iTunesDB'.'
tranferring Ipod audiobooks (m4b) files to my Ipod. I can't get them to transfer with GTKpod or Rhythmbox. I did manage to get a file copied, but it didn't show up on the Ipod.
View 2 Replies View RelatedI like to make tutorials on several different things, and since I'm a ubuntu user now, I found Record my Desktop. The thing is, When I stop the video, the encoder takes FOREVER! I left it there for over 5 minutes and it's still at 0%.
View 1 Replies View Related