Ubuntu :: Lucid Kernels Not Presented For Installation
Apr 12, 2011
Just curious as to why this would be happening, but I had been running on the Lucid kernel 2.6.32-28-generic. And when I looked in Synaptic, I noticed there were kernels 29 and 30 available. I manually installed them and deleted the older ones I had - 27 and 28. I believe I have all of the generic Lucid software sources and I get updates for everything else. Just curious as to why these kernels were not available to be installed automatically.
View 5 Replies
ADVERTISEMENT
May 26, 2010
Today I was trying to clean up my system and am a little bit stumped on something.
I used synaptic to clean up installed kernels, except for the one that was currently running. Once done I went ahead and restarted my computer.
Grub lists only one kernel available. However when I go to a prompt and
issue dpkg --list|grep linux-image I get several items listed code...
2.6.32-22-generic is the kernel I am running so I assume the "ii" files have something to do with the kernel in memory.
However, what are the "rc" files that are listed? Resource files? All three kernels referenced have been removed a LONG time ago and when I look for installed headers, or anything else, there is nothing installed for *-12, *-12 or *-14.
And when I check Synaptic for just the kernel number I get a list of packages with no version install, no latest version notation and no description (attached screenshot).
Just what are those references and how does one remove them?
View 2 Replies
View Related
Jan 25, 2010
I have a vista/ubuntu 9.10 duel boot laptop. Last week the screen was broken so it went back to the manufacture. Before that I rename the /etc/grub.d/10_linux file and ran grub-update so that Grub will only show windows boot menu (in case it confuses the repairman) now I have the laptop back and I am eating my own medicine.how to restore my ubuntu boot menus? I can now only boot into windows, although it seems like I can go to my ubuntu partition and change back my grub.cfg (which I did not backup!)but I can't remember the menuentry details.Is there any way, other than manually change my grub.cfg, so that I can boot into ubuntu again?
View 5 Replies
View Related
Nov 26, 2010
I have a machine with 2 hard drives, one with Vista installed and the other empty, ready to host an Ubuntu installation. I want my system to dual boot. When I boot via the Ubuntu 10.10 CD I am presented with two choices : install Linux to SCSI1 (0,0,0) (sda) using the entire disk, or to SCSI2 (0,0,0) (sdb) with 50% of the disk designated as Files and the other 50% designated as Ubuntu. Which one do I choose?
View 9 Replies
View Related
Nov 25, 2010
i'm having a problem with every single kernel upgrade since 2.6.32-21.I'm currently upgraded to 10.10 using GRUB2 and LVM disk configuration and all newer kernels (up to the latest 2.6.35-23) crash with the following errors:/init: .: line 61: can't open '/scripts/functions'Kernel panic - not syncing: Attempted to kill init!Pid: 1, comm: init not taintedI've already double checked all the entries in GRUB regarding paths, etc and i can't seem to find any difference between the working 2.6.32.21 and all the others
View 6 Replies
View Related
Mar 17, 2010
After I messed up badly with my netbook I have to reinstalll the OS, it is a government property netbook that came up with Edubuntu 7.04 insalled on it. I shouldn't mess with the filesystem but I did and now I have to install Edubuntu from the beginning, but I must be sure that everything will just like I have done no change, so I am afraid that I can make some mistakes at this pointThe first thing that I want to know is: Why there are multiple kernels listed at the GRUB (v 1.5)...this is the full list:
Ubuntu, kernel 2.6.28.9 Default
Ubuntu, kernel 2.6.28.9 Default (recovery mode)
Ubuntu, kernel 2.6.28.9
[code]....
View 3 Replies
View Related
May 10, 2010
I just installed 10.04 over my previous dual boot with Windows7 and 9.10. Went well. Now, in the Grub2 menu, there are like 14 kernels. I tried to find them in Synaptic to delete them, but they are not there! So, I went to grub.cfg and deleted the entries, updated grub, and they were back! How do I get rid of these entries?
View 6 Replies
View Related
Oct 20, 2010
I did a "dirty install" of Maverick over my existing Lucid system. That went very well and I am having no problems with Maverick. However, this morning, I decided to clean off the old Lucid kernels. In the past, after installing a new kernel on the same Ubuntu release, I have done this by running "aptitude search 2.6.32-24", for example, then running "sudo aptitude purge" for the kernel and header files it found.
Now that I have changed releases, aptitude no longer finds the Lucid kernels installed on my system, even though they still reside in the file system and show up on the grub2 menu. So, how do I manually find everything necessary to delete for the old Lucid kernels?
View 9 Replies
View Related
Oct 11, 2010
Ubuntu 10.04 how stable are the lucid-proposed and lucid-backports options in the software sources settings?
View 4 Replies
View Related
Apr 30, 2010
What's the procedure for updating from Lucid Beta 2 to Lucid LTS? Is it just "apt-get upgrade"? Or would I be better off with a clean install?
View 2 Replies
View Related
Aug 26, 2010
I have Ubuntu 8.04 (32-bits) installed on /dev/sda and Ubuntu 10.04 (64-bits) installed on /dev/sdc (this is an update from 8.04 64-bits originally installed on /dev/sdc). There is a grub on each of these two disks. Both are the old grub (prior to version 2). Here is the top kernel listing from /dev/sda:
titleUbuntu 10.04 LTS, kernel 2.6.32-24-generic (grub sur unite1)
root(hd2,0)
kernel/boot/vmlinuz-2.6.32-24-generic root=UUID=761c3d13-cc55-4117-934f-693766e122b6 ro quiet splash locale=fr_FR
initrd/boot/initrd.img-2.6.32-24-generic
quiet
[Code]...
View 9 Replies
View Related
May 3, 2011
I have this strange problem on ubuntu 10.04 64 bit, that when running update-grub, it will only put the oldest kernel into the grub menu, despite the fact that I have recent kernels around as well.
in particular:
Code:
# update-grub
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
[code]...
I'd like to see the most recent kernels in the grub menu, with the most recent being on top.
View 3 Replies
View Related
May 5, 2010
The title's not especially clear, so I'll post a screenshot of what's happening. The upgrade keeps finding instances of the same kernel; the list in the terminal is constantly scrolling down, finding 'new' instances.
It's been doing this for about half an hour now. BTW, upgrading from 64bit 9.10 to 64bit 10.04.
View 1 Replies
View Related
Aug 1, 2010
I have a grub menu with a ton of old kernel entries that I want to delete. I've scoured this forum, and haven't found anything that works. I've tried:
Code:"the easiest way to get rid of old kernels from grub is to uninstall the package, the post-install scripts will update grub
for example my current kernel is:
uname -a
Linux hemma 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:02:15 UTC 2009 x86_64 GNU/Linux
then remove older kernels found in /boot like this:
sudo aptitude remove linux-image-2.6.31-15-generic" When I tried that, the output showed the package being removed, but nothing was removed from the grub menu. I tried running the kernel I supposedly removed, and it wouldn't start, which is promising, but how do I get it out of the grub menu? I've also tried using Synaptic, but that didn't work either.
View 8 Replies
View Related
Jun 9, 2011
I have recently installed the Maverick backport kernel (2.6.35 - from the lucid-updates/main repo) and while I was at it I also manually (through synaptic) got rid of some old kernels. I made sure that I kept the current Lucid kernel though (that was working fine). All seemed well (although I didn't actually check - just no errors) so I rebooted.On reboot I have lost all my Ubuntu kernel options!
I rebooted with a live cd, mounted, etc and ran
Code:
sudo update-grub
but it doesn't seem to find any kernels!
Code:
grub-install --recheck --root-directory=/media/mnt /dev/sda
Checked /boot to see if the kernels are there:
Code:
jed@lightning:/boot$ ls
abi-2.6.32-31-generic memtest86+.bin
abi-2.6.32-32-generic System.map-2.6.32-31-generic
[code]....
Even reinstalled burg (used to use it but it got broken by a kernel update long ago and never bothered to fix it as I only use Linux these days anyway)Funny thing is that BURG finds the kernels and reports no problem, but then drops to the grub-error prompt on boot.
View 9 Replies
View Related
Aug 5, 2011
I upgraded to 2.6.35-30.56 last night and now my system's a little flaky. Everything seems to be running ever-so-slightly slower and fullscreen flash is now choppy. The weird thing is the Grub menu upon bootup only shows the latest kernel, but not the previous kernels. Doing an "ls" of the /boot folder only shows this newest kernel. I'd like to revert back to the previous kernel but don't know how.
View 2 Replies
View Related
Oct 19, 2010
I am using a Dell XPS m1330 with ubuntu Maverick 10.10 and with a Nvidia card. Recently I wanted to add plymouth support to my boot screens via this script: [URL].... but maybe i did something that ruined my pc and now, in GRUB, i can only see recovery kernels. The situation is this: in grub i see
linux recovery kernel 1
linux recovery kernel 2 (old one)
memtest
windows 7
My "normal" linux kernels disappeared. When I want to boot linux I use a recovery kernel, then I simply hit "resume" in the process, do the textual login and than use the command "startx" to start the system. However i'm getting no Plymouth and no normal boot. I have already tried to fix grub recreating the linux kernels, but they just don't show.
View 1 Replies
View Related
Jul 6, 2011
how would i go about deleting my old kernel?i have my ubuntu machine partitioned the way gentoo would partition a drive with a seperate boot directory. my boot directory is only 200 megs so i can probably fit 4 kernels max into it and need to eject the old ones.
View 3 Replies
View Related
May 9, 2010
I recently upgraded from Karmic to Lucid via the Update Manager. I would like to upgrade further by switching from 32 Bit to 64 Bit. I downloaded the Lucid 64 Bit ISO and wrote an install disk. When I reboot the computer with the install disk nothing happens.
View 2 Replies
View Related
Jul 26, 2011
I am currently running a Debian 4.0 (etch) PC and I can't upgrade to a newer distribution for legacy software reasons.
It is currently running on Kernel 2.6.18-4-686 and I would like to upgrade it to Kernel 2.6.22-3-686 (whilst keeping my current Debian 4.0 Etch installation). Does anyone know how this could be possible?
Prefereably I would like to instal Kernel 2.6.22-3-686 along side my current Kernel 2.6.18-4-686 with the option to specify which kernel to use when booting.
View 6 Replies
View Related
Oct 22, 2010
I have had some trouble with understanding the wireless drivers. I am using backtrack 4 R1, and the reason was merely for the network and having many necessary networking dependencies already there. However I found that I am using a HAL for the ath9k and madwifi-ng drivers, thus I must patch the card and go through all of that.
The specific distribution I am using is Backtrack 4 R1 with KDE3 and ubuntu on the 2.6.34 kernel. I know I have through an update script found the wireless drivers and downloaded them, however all attempts to get it to fully work haven't helped. I checked the forums, and it doesn't seem like they consider it a backtrack specific question but a linux specific question. I performed hwinfo and it returns ath9k and the memory address, channels 1-14, wlan frequencies(2.412,2.417, 2.422, 2.427, 2.432, 2.437, 2.442, 2.447, 2.452, 2.457, 2.462, 2.467, 2.472, 2.484. I have all modes of encryption set.
I am using both ifconfig and iwconfig with a wicd frontend to access the network typically. Unfortunately I am only seeing a wlan0 and no ath0. Furthermore, I manually issue these commands I am doing so I set each aspect of the card up (i.e essid, channel, mtu, fragmentation, etc....).
Now I did shed some light upon this in the sense that I found out how to initialize the madwifi-ng hal abstraction layer via 'start airmon-ng wlan0' and then it returns.....
mon0 ath9k py0 etc. etc. etc.( this isn't exact I am unfortunately not at my computer. But the device is then able to work, however I am not sure as to why I am not able to have the ath0 device in my wireless devices if indeed everything else appears to be ath0.
View 5 Replies
View Related
Nov 1, 2010
I am running a dual boot system with windows 7 and Ubuntu. Both have run smoothly on my machine (Core 2 quad core on Gigabyte board) I recently upgraded to 10.10 from 10.04 via the update manager within 10.04. Following the upgrade the initial boot failed at the login screen ( i simply got the purple colored screen with a white box in the center of it). Instead of trying to figure out what went wrong, I simply re-installed 10.10 from live CD on top of the upgraded Ubuntu that was failing at the login screen. The live CD install seemed to fix everything for the most part ( I did notice some quickly flashing text right before the login screen. I think it was an error message but it was too fast to read)
My problem now is that I am trying to remove some of my old kernels from the Grub2 boot screen and I cant. I have read many posts on how to remove the old kernels, but my system is proving to be difficult. The old kernels definitely show during boot, but whenever I go into Synaptic they are not there. I have downloaded Ubuntu Tweak, and they do not show in it either. I have read the information at [URL] I went to http://www.fixthecode.com/remove-hug...sts-in-ubuntu/ and thought this would fix my problem but I keep getting an error: "awk: 1: unexpected character 0xe2" when i try to run: "dpkg -l | grep ^ii | grep 2.6.3x-xx | awk -F{print $2} I am running kernel 2.6.35-22 The kernels i want to remove are 2.6.32-23 and 2.6.32-24.
View 7 Replies
View Related
Apr 30, 2010
My Windows Vista installation won't start after upgrading from Karmic to Lucid. If I select it on GRUB2, it leaves a blinking cursor on screen. And I tried doing the whole test disk thing and the boot info script. This is what my Results.txt file says
[Code]....
View 8 Replies
View Related
May 20, 2010
Canon MX320, MX330, MX860 printer installation on Kubuntu Lucid 10.04 AMD64 bit. I am sure Ubuntu Lucid is similar. Once I upgraded to Lucid 10.04 AMD64 bit I found that getting a Canon Pixma MX printer installed was not going to be easy. So I thought it help others if I posted my experience here. To pull this off you will need both the Debian package, (.deb), and the source package from either
Canon Europe: [URL]... Or Canon Australia: [URL]... NOTE: The only reason to get the source is to access the ppd files. They are in the Debian package but it is a lot more work to walk newbies through unpacking the .deb. Since there are errors in the source code it makes impossible to compile a driver. Therefore, you will need to install the 32bit Debian package and force the architecture, then add the correct printer driver from the ppd file in the source package. While these instructions worked for me there are a few assumption I make which mat affect your outcome. My MX860 has a wireless network connection.
In other words I have no idea if this will or will not work on a USB attached printer. (If someone would be kind enough to post back if they get that configuration working that would be cool.) The other assumption is that the general reader is relatively new to Lunix and the command line interface. The commands were cut and pasted from my working kconsole, so they should work for anyone.Here we go:........
View 9 Replies
View Related
Jun 14, 2010
After screwing up my current UNR install, I have decided to get a fresh installation of regular Lucid without all the BS that comes with the netbook remix, BUT when I boot from usb and start the process I can't get past the keyboard selection phase... it just hangs there forever. I tried making a usb with the alternate text based version too but it halts at the same spot, namely detecting hdd's. Now, I've installed the UNR previously from usb without any problems so something is wrong here, I just haven't got any wiser from reading whats online either. I checked the forums etc but didn't find any answers... I'm on an Asus Eee 1005PE by the way.
View 2 Replies
View Related
Aug 28, 2010
I am using Ubuntu 9.10 and am facing an issue while booting up. It goes into initfs command prompt on one of the 4 kernels that show up in the boot menu. I tried to look around for a likely solution and hence did the following:1. ran "chkdsk c: /f" in my windows partition.2. Added "rootdelay=90" in "/boot/grub/menu.lst" file.This is how my /boot/grub/menu.lst file looks and the problem is with the kernel 2.6.31-20-generic:
title Ubuntu 9.10, kernel 2.6.31-20-generic
uuid ceacd229-2b68-41bf-a967-8ee470085fd8
kernel /boot/vmlinuz-2.6.31-20-generic root=UUID=ceacd229-2b68-41bf-a967-8ee470085fd8 ro quiet
[code]....
View 9 Replies
View Related
Sep 4, 2010
I have an issue with apt-get that has been bugging me, namely that it tries to delete kernels I did not specify for deletion.
This is an issue that has been present over at least the last three releases and is present for both 32bit and 64bit, so it might actually be a feature and not a bug, however I can't see it's usefulness.
When I use the command:
Code:
sudo apt-get remove --purge 2.6.32-21*
It not only tries to remove the kernel 2.6.32.21 but gives me the following output:
Code:
sudo apt-get remove --purge 2.6.32-22*
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting linux-headers-lbm-2.6.32-24-generic for regex '2.6.32-22*'
Note, selecting linux-headers-2.6.32-21-preempt for regex '2.6.32-22*'
[Code]....
When I go through with this command to remove the oldest kernel on the system, it will actually delete all kernels present on my PC (as I painfully learned when I first tried it). Why is that the case? Wouldn't it make more sense to only remove the kernel 2.6.32.22?
View 6 Replies
View Related
Feb 15, 2011
I am running Maverick and I have installed through the terminal those two kernel versions (26 and 27). Once I restart the system and choose either of those kernels to start, I can only work in console mode. I am using 2.6.35-23 without a problem and I have been having this same problem with version 25 too.
View 2 Replies
View Related
Apr 30, 2011
I'm having an issue with my suspend, and nothing seems to be fixing it. Every time I suspend, the computer starts up as if it were shut down. Somebody recommended that I use a previous kernel, such as 2.6.35-28, rather than the current kernel, 2.6.38-. When I open Synaptic, no previous kernels are listed, so I wanted to see if anybody else knew how to install previous kernels.
View 1 Replies
View Related
Mar 17, 2010
What is the best way to uninstall old kernels in Ubuntu 9.10?
View 8 Replies
View Related
