Ubuntu :: Low Graphics Mode After Upgrade; Solved, But Reset On Every Reboot?
May 12, 2010
I'm using Ubuntu 9.10. Recently after an upgrade my Ubuntu started running in low graphics mode. After searching through forums, I could finally fix it.I'm not sure what exactly fixed it. I first changed the window manager to metacity. Run the following command:Code:sudo nvidia-xconfig --composite --render-accel --add-argb-glx-visualsAnd then changed window manager to compiz and desktop effects could be enabled.The problem is, everytime I reboot, its again running in low graphics mode, desktop effects cannot be enabled, and I have to do all the troubleshooting again! Any idea how to permanently fix this?EDIT: I found that the graphics is reset even without typing the command everytime. But I still have to switch back and forth from compiz window manager to set it all right!
View 7 Replies
ADVERTISEMENT
May 26, 2011
I upgraded from fedora 14 to fedora 15 yesterday. I live in India (IST) which is GMT +05:30. Every time I boot, my system clock increases its time by 5 and a half hours. For example, system clock on my machine is now Wednesday May 26,2011 22:44. If I were to reboot now, the time I would get is Thursday May 27, 2011 04:14. How do I correct this?
View 14 Replies
View Related
Nov 1, 2010
I've installed 10.04 on two different PC's (using two different live cd's) and after updating the software and rebooting the same error came up: in both cases the computer start and then a black screen appears asking me to enter the user and password like those old DOS systems (that is: ALL graphics are gone leaving me with nothing but a useless text prompt).
View 2 Replies
View Related
Jun 11, 2011
I have tried the tips, and to the best of my ability understand the later posts from the sticky post "Graphics Resolution" however I seem to keep reverting back to the blank screen. I did this:
Quote: ATI TIPS: Note that some ATI cards need flgrlx and some do not... If not then this workaround sometimes works: (Found this in another thread / credit to Quote: Originally Posted by surgus View Post
Steps for ATI users:
1. When the boot hangs, press ctrl+alt+f1.
2. Login as user with root privileges.
3. Type "cd /usr/share/ati" and press enter.
4. Type "sudo sh ./fglrx-uninstall.sh" and press enter.
5. Type "sudo reboot".
The above only works for some but not all, depending on what card you have and whether it actually is supported by additional drivers (proprietary). All at the moment, mostl seem to need "nomodeset radeon mode=X", where x= 0 or 1... Some ATI cards are not working with the current natty kernel, but are working with the older 2.6.37 kernel or the proposed 2.6,38.9 kerne (please see post 2)l Sometimes (rarely) it'll work but more often it won't, and in the two times it's worked I haven't known how to get it to remember the setting permanently- keep in mind I have no idea what that last paragraph about x= 0 or 1 means.
View 1 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Jan 9, 2010
I am using a fresh Ubuntu 9.10 installation with english-only language but with a German keyboard.
So, once booted into my (only) account, I use the Keyboard Preferences app to change my Layout from US to German. Which works. I also remove the US keyboard so that the only layout left is German.
But upon a reboot, not only the US kbd is back in the layouts list, but the kbd also has defaulted back to US, so that I have to open the Kbd Prefs to again remove the US layout to get my German layout active again.
I also tried "Apply System-wide" and even logged in as root to make the same changes, but the system always goes back to US layout after a reboot.
This is also a problem when logging in after a reboot - I want the system to use German layout there, too.
So, how do I change the layout globally so that even at the login page I have my German layout already active?
View 3 Replies
View Related
Apr 29, 2010
A few hours ago I upgraded my system, from Karmic to Lucid and I'm glad with it.But I have a problem, (two actually, I posted the second in other thread), Gnome is not remembering my Visual Effects configuration. I mean, I select the "extra" option and when reboot, it's back to "none".It will be a pain having to edit this every time my laptop starts.
View 2 Replies
View Related
Jul 18, 2011
after the 5.6 update I started loosing the connection to my router. Having had issues with routers before I assumed that the router was on its way out. However I happended to have a laptop handy the other day and thought I would give it a try (after eth0 went down), router was fine(same cable too). I have tried bringing eth0 up/down (gui and ifdown/ifup) and restarted the network(gui and cli) but it will not get an ip(as I recall it does recognize that the cable is connected). If I do a reboot, eth0 comes up immediately. The log just shows repeated dhcp requests. I tried a dhclient -r but it errors out with no link found. It has been doing this since 5.6 came out (roughly once a day) so I THINK that it is not a hardware issue(should have died completely by now if it was). PSU voltages show stable and unchanged. It does use the forcedeath driver. 5.6-64bit fully updated.
View 9 Replies
View Related
Mar 23, 2010
I installed Nvidia 195 version from their site and installed as per their instruction. Now, on reboot the resolution gets "800*600" while it should be "1366*768". What should I do?
View 5 Replies
View Related
Apr 21, 2010
My screen resolution keeps reverting back to the default resolution 800x600. I'm using ubuntu 10.04, but had the same problem on 9.10 on my Acer Revo r3600 ION. I am able to change the resolution to 1280x1024 but have to do it by the nVidia configuration tool. The tool then allows me to 'Save to X Configuration'which it appears to have done successfully.See the sections from my 'etcx11xorg.conf' file. This is the state of the file after a reboot by the way.how I can get my desired resolution to persist after I reboot?
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
View 2 Replies
View Related
Mar 26, 2010
I dont understand why but my theme changes everytime i reboot. The original theme Human changes to i think dust. when i open the appearance applet to change back the theme, the original human theme is already selected. So i have to select some other theme and then i select human theme, then the theme changes.Also the order of my taskbar icons changes and also the icons themselves.
View 3 Replies
View Related
Jun 17, 2010
Using slack 13.0 32-bit I have a dual-boot configuration with slack at sda1, sda2, sda3 and ubuntu 10.04 on sda6, sda7, sda8 When I boot into ubuntu, then boot back into slack, the date setting is change to '00.. something' (zero hours).
View 4 Replies
View Related
Jun 4, 2010
I am using RHEL 5.4 my root password is getting reset after every reboot.every time i had to change the password from kernel to access the root.i am unable to find the where the problem is.
View 2 Replies
View Related
Oct 22, 2010
I have hauppauge pvr-350 which has an mpeg2 decoder with an RGB and s-video out to let me send video to my tv. I'm using the ivtv drivers which work well. To test the card I ran
Code:
cat test.mpeg > /dev/video16
-bash: /dev/video16: Permission denied
So then I did
Code:
ls -l /dev/video16
crw-rw---- 1 root video 81, 5 2010-10-22 12:21 /dev/video16
sudo chmod a+rw /dev/video16
[sudo] password for patrick:
cat test.mpeg > /dev/video16
However the permissions get reset everytime I reboot. Is there any way to pass an argument to the ivtv driver to change the default permissions?
View 1 Replies
View Related
Sep 1, 2010
Dual boot system. Boot Linux Fedora 13 and the hardware clock is set to GMT. Boot Windows 7, time is wrong, as it expects the hardware clock to be set to the local time. reset the hardware clock each time I reboot in to the other O/S.
View 5 Replies
View Related
Oct 30, 2009
This is probably a newbie problem, so forgive me, but when I do this:chmod o+rw /dev/nst0It resets back to what it was upon reboot. How do I get this change to stick?I tried searching the forums and Google, but I haven't found an answer.
View 1 Replies
View Related
Sep 8, 2010
I installed Open Suse 11.3 LXDE from the live CD I downloaded. My monitor settings reset to the highest resolution on every shutdown/reboot. Other settings like my wallpaper and removing the lock screen on screensaver also reset.
Is this there anything I can do to get settings/changes I make to stay?
View 2 Replies
View Related
Mar 5, 2010
I'm using Ubuntu 9.10, and a usb webcam that is shown as 'Bus 001 Device 005: ID 0ac8:3450 Z-Star Microelectronics Corp.' by lsusb.
The problem is that on connecting the cam, it just works with the first program I start (skype, tokbox, messenger), and if I disconnect it or switch to another program, it stops to work and I have to restart my computer to make it work again.
Is there some good solution to reset the camera without rebooting to make it work again?
View 1 Replies
View Related
Oct 20, 2009
Can someone assist me with recovering/resetting the password for Root via Single User Mode in CentOS v5? I've modified the kernel line using Single, S, and 1 but it appears that these commands are being totally ignored as the server continues with the boot process and displays the GUI logon screen. The server in question is a VM box running on ESX v3.5 U4. The person that created this VM is no longer employed here and I've exhausted everything I know regarding Single User Mode.
View 12 Replies
View Related
Mar 16, 2010
i did an update after a LONG time on my machine (there were like 77 updates) and when i restarted the computer, as reccomended, it booted up saying that ubuntu is gunna run in low graphics mode... apparently i am not able to use a window manager either, as became evident when i clicked on the "show desktop" button...
also there are no tabs for any of the open windows on my "start bar" (the lower bar across the screen... also i cant switch to different desktops anymore and i cant maximize/minize or drag windows like my web browser around (probably cause there isnt a window manager running)....
View 2 Replies
View Related
May 14, 2010
I have (not so recently) installed 10.04. It seems to randomly go into low graphics mode completely randomly i.e. using firefox, gimp, terminal.... not just with high graphics programs. A dialog will pop up and say that my devices are not detected/ configured properly. I then have to force shutdown..
View 9 Replies
View Related
Apr 9, 2011
In these days I install ubuntu 9.10 64bit on several notebook (Intel + AMD Switchable Graphics, NVIDIA Optimus Hybrid graphics), but the same problem is it can't boot ubuntu with graphic mode. I only can install it with text mode, and after installation, it still boot with text mode. I tried to execute startx, but failed to switch to graphics mode. I didn't see this issue with some notebooks with ATI/NVIDIA graphics, so I think this issue may relate with VBIOS VBE mode settings.
When I try to execute "startx" under the text mode, some error information appears as below.
(EE) open /dev/fb0: No such file or directory
(EE) No devices detected.
Fatal server error:
no screens found
View 3 Replies
View Related
May 7, 2011
I was attempting to install conky, but I hit some errors and now my ubuntu is running in low graphics mode.
View 1 Replies
View Related
Feb 21, 2011
I have Ubuntu 10.10 and when I boot my PC I can see the following message: Ubuntu is running in low graphics mode and Ubuntu stops booting. I can-t boot in it I can only use command line.
I think I accidentally uninstalled some packages clicking at completelly removal at some ipod utillities in synaptic. How can I fix this?
View 4 Replies
View Related
Mar 2, 2010
I'm running Ubuntu 9.10. I tried a solution for a wifi problem (wasn't always connecting) and now when I reboot I get "Ubuntu is running in low graphics mode" along with a bunch of EE messages. When I click OK it gives me "Run Ubuntu in low-graphics mode for just one session." Which gets me back to the desktop.
View 1 Replies
View Related
Mar 24, 2010
I am getting the following upon booting up after upgrading from 9.10 to 10.04 Beta:
Ubuntu is running in low-graphics mode. The following encountered. You may need to update your configuration to solve this
(EE) intel(0):[drm] failed to set drm interface version
(EE) intel(0):Failed to become DRM master
(EE) intel(0):failed to get resources:Bad file descriptor
(EE) intel(0:Kernel modesetting setup failed
(EE) Screen(s) found, but none have a usable configuration.
I then press the OK button (no other option given). Then I'm presented a menu with the following options:
(x) Run Ubuntu in low-graphics mode for just one session
( ) Reconfigure graphics
( ) Troubleshoot the error
( ) Exit to console login
( ) Restart X
Cancel and OK buttons. I choose OK and the system seems to boot ok.
I'm not sure what is wrong or how to go about solving this one.
View 3 Replies
View Related
May 15, 2010
This started yesterday.I have been running Lucid since the Beta release with no problems. Yesterday, I found about 20 or so updates ready for 10.04. I looked them over, mostly lib files, so I decided to go ahead and let them update. That evening I rebooted my machine before I left for the night, and it came up with the error "Ubuntu is running in Low Graphics Mode". In a word X is totally hosed. The display is cut just left of center, with part of the windows on the right carrying off the screen to come back onto the screen to the left.
I thought maybe Xconf might have been messed up, but not sure how. The updates I applied did not do anything to Xorg; and my understanding was that I didn't need that file because I am running with an Nvidia card. I tried to "reconfigure" the X settings from the error message, that did not work. I logged into a text only terminal, and copied a good backup of Xorg.conf back into place and rebooted. Same thing, still running in Low Graphics mode.
View 9 Replies
View Related
Jun 20, 2010
(Consider yourselves forewarned: I'm completely new and will be incredibly stupid. Give me slack. )
So I'm trying to run my S-Video cord from my HP Desktop to my television screen. Everything was set up, then I looked up how to get it to start playing on forums here. I went to my NVIDIA, and when I went to change what apparently had to be changed, it was already set up in the format I was supposed to set it up as. I hit "save", and then restarted my computer, as the step-by-step instructions said. Upon restarting, I got an interesting message saying that Ubuntu had to be run in low graphics mode. I don't know the logistics of my computer, or really anything (it was given to me, and I don't know how to check ) I've been reading some things here, and a few things sounded like what was wrong with me, but when I followed the directions, it got me no where. I'm coming to you to prevent me from chucking this thing out my window .
So, what I'm asking from you:
1)How do I get out of Low Graphic Mode
2)How do I set up my NVIDIA to play to my TV?
View 1 Replies
View Related
Jul 30, 2010
Have a reasonably old HP D510 running onboard Intel 845G graphics, which has worked fine to date using Suse 10/11.x x86 and also have tried various Ubuntu breeds on it before, as well. Have just installed Kubuntu 10.04, and am having issues that irregularly, and apparently randomly, screen goes black and I get a message saying "Ubuntu is running in low-graphics mode".
I OK this and get a messages asking me what I would like to do:
1 Run in low graphic for this session
2 Reconfigure graphic
3 Troubleshoot
4 Exit to console
5 Restart x
Basically, none of these work. If I click 2, there are a number of choices which don't work, can only cancel. Basically the only fix is a reboot, and it will again work for a 'random period of time'. Have never had this issue previously, so it is obviously something that has been introduced with 10.04? Briefly installed Ubuntu 10.04 prior to Kubuntu, and think I had the same prob.
View 3 Replies
View Related
Sep 4, 2010
For some reason after updating, somewhere my system is messed up where my 3d acceleration doesn't work. I found a workaround though, I can get it to work when I reboot, and manually select my OS at the grub2 menu by pressing enter. It doesn't work all the time this way, but most the time it does allow 3d acceleration to work almost normal. If I let the grub2 timer count down to auto select it will never be 3d accelerated, and prompts me it's going to run in low-graphics mode and I'm given an option to Restart X. Ok that's one part of it...
Now with my workaround say I got 3d acceleration to work, when I go to System > Preferences > Appearance : and for Visual Effects I select "Normal" (was on none). It will apply fine, until I reboot it gets set back to none. So I'm having to manually put everything back (graphics) every time I boot, this is a horrible bug. Then onto another aspect of this wonderful update. All my letters and numbers on the keyboard are normal, except when I use control and ALT, they don't seem to be mapped correctly because I can't use any of my Keyboard Shortcuts.
View 9 Replies
View Related
