Ubuntu :: Looking For Compatible Multifunction Printer?
Nov 5, 2010Which HP desk jet multifunction printer. Printer, scanner, copier, fax is compatible with Kubuntu?
View 1 Replies
ADVERTISEMENT
Ubuntu :: Multifunction Monochromatic Laser Printer For 10.04?
Sep 24, 2010I am using Lucid 10.04 and don't plan to change until support is dropped. I am looking to buy a multifunction monochromatic laser printer.
I was considering Samsung SCX-4828FN or HP LaserJet M1522NF. Both have network cards and support for Linux, but I am a little leery of the Samsung's support in Lucid. Does anyone have this printer? It seems to me a better choice if it works, because the toner is quite a bit more economical and I print quite a a lot.
My only requirements are all-in-one scanner/printer, economical, network card, proven to work.
Hardware :: HP Multifunction Printer That Works Well Out Of The Box?
Jan 14, 2011I am looking for a HP Multifunction Printer that works well out of the box with Linux. I have been to the printer tables and seen the host of HP printers that work, but I would like to hear from someone who has recent experience.
View 2 Replies View RelatedUbuntu Installation :: Cannot Install Multifunction Network Printer
Apr 12, 2010I have a multifunction printer ricoh afico 550 but I can't install it with my ubuntu system everytime I try to install it, it installed as ricoh afico 220 and it's not printing but my windows pc can print easily. By the the printer in a networking printer.
View 1 Replies View RelatedUbuntu :: Testing Scanner Portion Of A Multifunction Printer?
Aug 10, 2010I recently installed Ubuntu 9.04 (Jaunty Jackalope) which I then promptly upgraded to 10.04 LTS (Lucid Lynx).
I have a canon pixma MX320 multifunction printer. I downloaded the printer/scanner drivers for linux (debian) from [URL]...asp and installed them with no problems.
The printer function works, as I managed to print a test page, but I was wondering if there was a way to test the scanner portion of my multifunction printer to make sure it works?
Fedora Hardware :: Canon MX860 Multifunction Wireless Printer Not Detected
Jun 2, 2010I have Canon MX860 Multifunction USB/Wireless printer that I am trying to add in Fedora 13. Looking under Desktop > Computer via USB connection, the printer is detected as some hardware device I can mount and unmount. However, when I am trying to add this printer via System > Administration > Printing, the printer is not detected at all nor can I add. FYI, this printer works fine in Ubuntu 10.04 LTS. How I can make this printer working in Fedora 13?
View 5 Replies View RelatedFedora Hardware :: Can't Install My Multifunction Printer CANON I-SENSYS MF4690PL
Jun 21, 2010I installed Fedora 13 and can't install my multifunction printer CANON i-SENSYS MF4690PL.The scanner works fine (very odd) only printer not working.Is there a specific driver for this printer and if so, how to install this driver on Fedora 13? The MF4690PL and GNU/Linux I get this in terminal:
Code:
[root@Philip philip]# system-config-printer libnotify-Message: Unable to get session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.How do I now if the kernel has support for my printer ?
[Code]...
Slackware :: --current - Hplip Won't Setup To Network Capable Multifunction Printer
Mar 14, 2011I'm wondering if anyone else has this issue before I send a note off to Slackware on this.
The --current hplip package can't seem to actually complete the installation of a networked hp printer that has the printer physically plugged into the network.
The hplip app initially does detect the device, then I click next, then it says installation failed as it can't connect to the device.
Perhaps I'm doing something wrong.
I am however able to build, and run an older hplip that --current used a while back and it works splendid for adding a printer over the network.
I'm using version hplip-3.9.4b-i486-1 but I know that's not a big help to the project.
Hardware :: Makes A Printer Compatible?
May 26, 2011I'm using cups/samba. In cups the printers are setup as a raw printer. Every so often we purchase a new HP printer that will not work properly. If I do a standard lpr print job that works with every other printer iee... "lpr -Pprinter /etc/hosts" for example.This printer has activity seems to take the job but never print it then goes back to idle.So my question is, what specifications do I need to abide by when purchasing printers to work on my network?
View 3 Replies View RelatedUbuntu :: Which Video Card And Printer 100 Percent Compatible
Feb 21, 2010Maybe this question is asked too many times but I need a fresh one. Which Video Card and Printer should I buy that its 100% compatible with Linux? Because I have ATI Raedon x700 and Lexmark printer.
View 3 Replies View RelatedFedora Hardware :: Which (printer + Scanner) Is Compatible And Drivers Are In Repo's
Aug 27, 2011which (printer+scanner) is compatible with linux and drivers are in repo's?
HP LaserJet Pro M1132
SAMSUNG SCX-3200
witch of them is better? better performance , ...?
OpenSUSE Hardware :: Epson SX205 Printer - PPD Version Not Compatible
Sep 7, 2010I'm trying to configure my SX205 printer. It is well recognized, and Gutenprint driver are available. But the printer doesn't work, here are the error messages :
The PPD version (6341210) is not compatible with Gutenprint 5.2.5.
I am on opensuse 11.3; so the gutenprint version is 5.2.4, i don't know why it talk about 5.2.5. I have tried cups-genppdupdate but it doesn't change anything.
Ubuntu Networking :: Multifunction Printers In The Networked World?
Jan 23, 2010So having recently set up my server (including some disk space and ushare, and an additional laserjet printer) I was wondering if anyone had any experience of putting a multifunction printer into an ubuntu server and adding it locally (to the server) then to the networked computers....I know this printer works perfectly (the scan too!) when plugged directly into a machine's USB....I suppose my real question is....does anyone know anything about the scanner side of it?? is this going to work?? I reckon the printer side will (/should - i know the printer works and i know the server can share printers.....lol) but the scanner side is relatively new (when put into the context of shared from my HS.Please note:My server is just running vanilla (plain) ubuntu 9.10....and my compo's are 10.04 and 9.10....ubuntu ONLY network...
View 1 Replies View RelatedUbuntu Networking :: Scanning Over Lpd-network And A RX500 Multifunction Device?
May 3, 2011I have made an EPSON RX500 multifunction device (printer/scanner) available over my router with the lpd protocol. Both PCs (ubuntu 10.04 laptop wireless, 8.10 desktop wired) connected to it can print, but not scan, since XSANE does not recognize the scanner over the network. It does hoverer both, scanning and printing, if connected with an USB cable. How can i configure xsane to recognize my RX500 over the network?
View 1 Replies View RelatedDebian Installation :: When Connect The Printer, Doesn't Recognize Printer As The Photosmart B109 Printer For Unknown Reason?
Jan 3, 2011I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedGeneral :: Installing Printer - Add Printer In Local Network Or Windows Printer Via Samba
Nov 23, 2009I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
Ubuntu :: Root Admin - Loading The Printer Drivers For New Lexmark Printer
Jul 6, 2010Ubuntu 10.04 and have a problem with loading the Linux printer drivers for my new Lexmark printer. When I try to load up the printer driver downloaded from the Lexmark site I am asked to enter a root administrator password, but when I enter the password I used to setup the OS it will not accept it. I have reviewed the "sudo" terminal password info, but as I am a newbie I was concerned about wrecking the installation.
View 4 Replies View RelatedUbuntu Networking :: Can't Locate Printer Drivers In Network Printer Setup?
Oct 19, 2010I am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
Ubuntu :: 'Add Printer' Missing When Running System-config-printer
Aug 1, 2010I want to add my printer to ubuntu 10.04. When I run the system-config-printer (System->Administration->Printing) I can't choose the "Add" in the menu bar (ctrl+n does not work either).
View 3 Replies View RelatedUbuntu Networking :: HP All In One C3180 Printer - Only Gets Recognized As A Printer But There Is No Way To Get It To Scan
Nov 21, 2010I have managed to install ubuntu server and set it quite nicely to share my files and printers over my network. I have two printers, a Lexmark e232 and a hp C3180 multifunctional printer (i.e. printer+scaner+a copy function). I have no problem installing the Lexmark printer on my windows 7 computers on the network, however, the All in One printer only gets recognized as a printer but there is no way to get it to scan. I have been reading on the web about all in one printers but I don't quite understand what the issues are.
Is there a way for me to get the full functionality of this printer over the network? I think this wouldn't be a problem if there was some sort of software designed by hp that would allow me to add printers that are not directly connected to the computer (via usb) but are shared from another pc on the network.
Ubuntu :: Adding Printer Memory To HP 4000 Laser Printer
Mar 16, 2011I notice sometimes if the page has graphics it either is very slow to print or wont print.Will adding memory help? I was thinking of a 64mb module.
View 5 Replies View RelatedUbuntu Installation :: Setup USB Printer On Lucid Without Printer Connection?
Aug 3, 2011I'm setting up a netbook for somebody (in another country!) and one of the last hurdles is the printer setup. I only have the netbook and not the printer with me. I know that the printer is a HP PSC 1215 All-In-One Printer but there seems to be a Catch-22 that I need to have the printer connected in order to be able to set this up using the GUI tools. How do I work around this? As a minimum I just want to enable printing, although scanning would be a bonus.
View 1 Replies View RelatedUbuntu :: Intermittent Usb Printer - Sometimes The Printer Prints Sometimes It Doesn't
Mar 24, 2010I have a parallel port printer connected using usb->parallel adapter. Sometimes the printer prints sometimes it doesn't.
A job will go the print queue and then sit there for ages. Sometimes if I unplug and then replug the usb->parallel cable the printer will print other times it will print half the document then freeze until the cable was unplugged and replugged again.
The printer never shows up in the list using lsusb (only my usb mouse and scanner do).
The printer is an hp deskjet 690c and worked fine under WinXP through a normal parallel cable. The one thing I haven't tested (but will test tomorrow) is the usb->parallel cable in XP.
OpenSUSE Hardware :: Unable To Add USB Printer Via The YaST2 Printer Configuration Setup Tool In 11.3
Aug 26, 2010I am unable to add my USB printer via the YaST2 Printer Configuration setup tool in openSUSE 11.3. The printer, a Dell Color Laser 1320c, was last used with openSUSE 11.2, and setup was entirely uneventful. No driver is provided by Dell, so I used the Fuji Xerox DocuPrint C525A Linux driver. The problem: To add a print queue in 11.3, a Connection must be specified (parallel, USB, network, etc). However, the configuration wizard fails to show the presence of the USB print device.
[Code]...
This printer was working just eight weeks ago under 11.2, and 11.3 is obviously able to detect its presence and identify it correctly. I feel certain the solution is simple, but I haven't found documentation that provides the answer.
General :: Install A Printer On The Parallel Port? The Printer Is A Epson LX-2170?
May 14, 2010My Operating system is Ubuntu 10-4 that I have just installed.
View 6 Replies View RelatedCentOS 5 Server :: Super Slow Windows Printer Properties Dialogue With Samba Printer
Sep 18, 2009I have a Centos 5.3 server with Samba file shares and a shared Samba printer. I am not running a domain.
I recently changed my windows desktop pc from an XP machine to a vista 64 machine... It has a different user name. Everything went pretty smoothly - and the and the vista machine found the smba printer - and even downloaded the driver from the samba server. he printer works OK - and the file shares are fine.
The only thing which is quite odd - is that the Printer Properties dialogue takes more than 30 seconds to come up - and every action you attempt with the dialogue takes a similar amount of time.
I will include below the essence of my smb.conf:
Fedora Networking :: System-config-printer Bad Printer Entry?
Dec 26, 2009I have a problem with a bad entry in my system-config-printer on my notebook computer which I think is interfering with my ability to print. I run fedora 10 on several systems in my house. On one desktop, I have a printer hosted which I think I have successfully setup for wireless network sharing (an HP895) using IPP.My problem seems to be a bad entry in my system-config-printer on my notebook computer which seems to stall when I try to print from applications (Firefox for example.) on the notebook. If I open up "Printing", I have 3 printers listed... one of them is for when the printer is attached directly to the notebook, one of them is the working printer description "printer" and the 3d is the bad entry. If I click on the bad entry to try to delete it, I don't have that option, but If I try to look at the "properties" for that entry, system-config-printer stalls (as do other applications when the printing dialog box starts up, and I have to force them to shut down.)
I will attach some screenshots and a copy of my /etc/cups/printers.conf file.How do I get rid of this "bad entry" in the system-config-printers GUI ? It doesn't seem to exist in the printers.conf file.
Ubuntu :: HD DMA Compatible Or Not?
Jan 7, 2010My laptop has a WD400 scorpio IDE hard disk. I'm trying to figure out if it's DMA compatible or not. Taking the cover off there's no mention of DMA on the label. I've googled and get confusing results, at least to me. Is there a way I can figure out if it's DMA or not?
View 6 Replies View RelatedUbuntu :: Is 64 Bit Compatible With The New 3TB HDs
Jan 27, 2011I know that 32 bit windows won't recognize it as 3TBs... I have read that 64 bit windows will with some extra software... my question is will ubuntu recognize the drive as 3 TBs? I just ask because I am currently building a Myth box and would LOVE to have that capacity of storage for all my media.
View 9 Replies View RelatedHardware :: 10.10 Installing HP Deskjet 1000 Printer - Error "Printer Requires The 'foomatic-rip-hplip' Program"
Feb 6, 2011I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
View 2 Replies View Related
