Red Hat / Fedora :: Load / Unload Module?

Apr 12, 2010

how to loads & unload module.why its important?

View 3 Replies


ADVERTISEMENT

Fedora Hardware :: Load/unload The Atl1c Module A Few Times The Link Will Come Up?

Jul 22, 2011

Anyone else having issues with the Atheros AR8132 and the atl1c module? I am on the 2.6.38.8-35.fc15.i686.PAE kernel, tried with a few others but it's flaky no matter which I choose.

Sometimes if I load/unload the atl1c module a few times the link will come up, but it seems the module is not even being loaded at boot and I have to modprobe it just to see the NIC.

View 4 Replies View Related

Debian Hardware :: Saa7134 Alsa Module Won't Unload

Jan 15, 2016

I have a hard time unloading a module (that is it's more stubborn than an aging leprechaun) that is being reported as not being used by lsmod:

Code: Select allroot@groot:~# modprobe -vr saa7134_alsa
modprobe: FATAL: Module saa7134_alsa is in use.
root@groot:~# lsmod | grep saa
saa7134_alsa           17686  0
saa7134               174878  1 saa7134_alsa
tveeprom               20593  1 saa7134

[Code] .....

Why I would need such an outlandish thing is that after I was forced to do a system reinstall thus losing my previous conf files I've been trying to reinstall my saa7134 tvcard. Normally i2c should handle the problem but it won't detect it. So I have a nice little script I found and modified to find the correct card although it is a bit tedious to run:

Code: Select all#/bin/sh
MAXCARD=150
for m in $(seq 0 $MAXCARD);
do
MAXTUNER=69
for i in $(seq 0 $MAXTUNER);

[Code] ...

But I can't unload saa7134 because saa7134_alsa is using it, and I can't unload saa7134_alsa, because, well, because the system doesn't feel like it. I've blacklisted the module (saa7134_alsa) but it gets loaded none the less and won't go away.

View 4 Replies View Related

Ubuntu Networking :: Ndiswrapper Only Works When Load And Unload The Native Drivers First

Jan 5, 2010

I recently received a used laptop that I was going to use for my kids, a Compaq Presario 2100. Everything went fine on the install, however I could not get the WiFi to work. The internal card, a Broadcom BCM4306, was attempting to use the b43legacy drivers, which I understand to be the native driver for this card, but would get all sorts of strange errors in 'dmesg', and would never get a solid connection.

After fiddling with this for 2 days, and reading countless troubleshooting guides, I finally gave up and decided to get it working with ndiswrapper. Everything worked perfect, except I can only get it to work if I first load b43legacy, then load ndiswrapper, then unload b43legacy. If I blacklist b43legacy, and just load ndiswrapper, iwconfig does not report a wlan0.

I ran across this posting, and decided to try this, but it also did not work. Plus, with this file in place, any attempt to use modprobe would complain about every line of that file.

View 3 Replies View Related

Ubuntu :: Hard Disk With Frequent Head Load/unload Cycles (10.04)?

May 15, 2010

I have a problem in Ubuntu 10.04. The bug is well know which makes the hard disk head to park often (2-3 times per minute) that's dangerous for the drive in the long term and annoying for me (click-click-click).I found out the "ugly-fix" for old Ubuntu version which was :hdparm -B 254 /dev/sda instead of 128. It works. The problem is that it doesn't remains (when restart/standby/ac connection-disconnection).I found a script well known too :Code:1) make a file named "99-hdd-spin-fix.sh". The important thing is starting with "99".2) make sure the file contains the following 2 lines (fix it if you have PATA HDD):

#!/bin/sh
hdparm -B 255 /dev/sda
3) copy this file to 3 locations:

[code]....

View 4 Replies View Related

Ubuntu :: Terminal Says It "Cannot Unload Module Vboxdrv"?

May 1, 2010

I'm having problems with Screen and VirtualBox, and the problems seem similar as if crucial components have vanished. Here is the screen issue and the last three posts are me. Basically, the solutions have been temporary so far. I changed the mode and group of /var/run/screen like the OP said but have not shutdown yet, so I don't know if that's a permanent solution yet. The other two temporary solutions didn't prove to be temporary until I shutdown and came back several hours later. Screen was still working after a reboot.

The same thing is happening with VBox: after doing what VBox tells me to do, the solution was temporary, and the same problem popped up after the next boot. Here are similar problems: I made sure I was in the vboxusers group. I added the module like the first one said, and it took me to another level of malfunction. I didn't take a screenshot or make a note of the first error message, but I've attached the second. Also, sudo /etc/init.d/vboxdrv setup did not work this time after adding the module. Like the first link said, vboxdrv didn't exist for him or her, so maybe my problem is similar. My terminal says it "Cannot unload module vboxdrv".

View 5 Replies View Related

Fedora :: Gtk Message - Failed To Load Module "'pk-gtk-module"

Aug 17, 2011

When opening gedit as a user I get the following message

Gkt-message: Failed to load module "'pk-gtk-module"

If I try to open gedit as root I get the same message but with other messages. These are shown in the attached file. gtk.txt

This is on an upgraded machine using the preupgrade method. The same has happened on two machines upgraded from F14 to F15 the same way. 64 bit systems.

How to clean this up so the messages do no appear?

View 4 Replies View Related

Networking :: Rtl8187 Driver Module Load Error (Invalid Module Format)?

Jun 1, 2009

When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:

[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists

[code]...

Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.

Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.

View 3 Replies View Related

Fedora :: Way To Load Module On Startup?

Jul 12, 2011

I rebooted my computer and noticed the aoe module didn't loadad to do a modprobe aoe)What's the proper way to have this start at boot time? (rather than something like doing a modprobe aoe in the rc.local

View 1 Replies View Related

Fedora :: Firefox On F11 Cannot Load PKCS Module

Jun 10, 2009

Just installed F11 and found out I cannot load an external security device in Firefox - the dialogue window does not work (Edit - Preferences - Advanced - Security Devices - Load, then the OK button does nothing!). This means you cannot use Firefox (i.e. cannot use F11 at all) if you need to log in through a web page or sign web transactions/documents using a smart card or any other crypto token.

I can't believe somebody released F11 with a browser that crippled! Moreover, this issue has been reported to Mozilla in April, but they did nothing until a second report in late May made them finally realize what they have done... and still Fedora team decided to go for it! Read here for details: [URL]

how to fix this, or may be an idea when F11 will update Firefox (Mozilla has provided a quick fix for the problem)? I don't want to wait until 3.5 final release, which may be months ahead -- and I certainly don't want to recompile the whole Mozilla stuff by myself -- neither I want to mess up with a downgrade of the browser, or a second installation of a 3.0 version with different prefix.

View 3 Replies View Related

Fedora :: Unable To Load Kernel Module 'nvidia.ko'

Nov 29, 2009

im trying to install the driver for my nvidia GeForce 7300 GS.i have Fedora 12 installed in an Intel duo core 2 processor 64 bits.kernel installed is 2.6.31.5-127.fc12.x86_64...i followed leigh's guide i did the 4 steps but after reboot screen goes blanck and X dont work.the log says:

-> Kernel module load error: insmod inserting './usr/src/nv/nvidia.ko'
-1 no such device

View 11 Replies View Related

Fedora :: Where To Load Module Snd-mixer-oss At System Startup?

May 18, 2011

Where I can load the module snd-mixer-oss at system startup?

View 2 Replies View Related

Fedora :: Error "Failed To Load Module "nvidia" (module-specific Error,0) No Drivers Available

May 1, 2011

I've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.

View 5 Replies View Related

Fedora :: Updated Kernel / Now Nvidia.ko Module Doesn't Load

Feb 26, 2010

I think I know quite well what my problem is. However, I'm still too much of a newbie to know how to solve it.My problem: I no longer get a login screen on my server after I ran a yum update which updated my kernel (thank god, vnc server still works).Cause: During startup Fedora complains that it can't load the module nvidia.ko. Reason: The module doesn't match the current kernel.

View 5 Replies View Related

Fedora Installation :: How And When To Load Kernel Module In Boot Up Process?

Jul 19, 2010

For a diskfull node (the OS installed in a disk), I can use the 'insmod' command to insert a kernel module into the kernel. And after the reboot, the module is still in the kernel. I have a question here: how, when and which kernel module will be loaded in the boot up process for a diskfull node?And for the diskless node, can I use the chroot or some other ways to install the kernel modules into ramdisk, so that kernel module can work when the diskless node boot up? I think it needs certain mechanism to load the kernel like the boot up of diskfull node.

View 8 Replies View Related

Fedora :: Unable To Get Module To Auto Load At Boot / Sort It?

Sep 20, 2010

I have been unable to get the snd-aloop module to load on boot.

I have tried appending the following to /etc/modprobe.d/dist-alsa.conf code...

View 2 Replies View Related

Red Hat / Fedora :: Ffmpeg-php And Gd Module Loading / Unable To Load Dynamic Library?

Jan 19, 2010

fedora 12 with php 5.3.1 + apache is installed on the server

I needed a FFMPEG + MENCODER + FFMPEG-PHP setup , so I have installed all of the necessary libraries/codecs along with ffmpeg , mencoder and ffmpeg-php

I've added ffmpeg-php (ffmpeg.so) module to php.ini and restarted httpd

But ffmpeg was not showing up in phpinfo() so I grepped : php -i | grep ffmpeg
for some clues and got this warning
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/ffmpeg.so' - /usr/lib/php/modules/ffmpeg.so: undefined symbol: php_gd_gdImageSetPixel in Unknown on line 0

That error explains why ffmpeg is not loading

Obviously something to do with GD library , so I've researched on the net , and found that some users suggest loading the GD module before FFMPEG module.

I gave it a try and added this at the end of php.ini:
Code: [gd]
;loading gd
extension=gd.so
[ffmpeg]
;loading ffmpeg
extension=ffmpeg.so ...but still same error when greping phpinfo()

View 1 Replies View Related

Programming :: Load Fortran Module For Matio Libraries Using Gfortran - Can't Open Module File 'matio.mod' For Reading

Jun 27, 2010

I am interested in using fortran and an external library called matio used to save arrays to matlab .mat files. I have installed the matio and matio-dev packages from synaptics but i cannot compile a code receiving an error Code: christos@christos-laptop:~/Desktop$ gfortran -o test test.f90 -lmatio -lz test.f90:2.13: USE MATIO 1

Fatal Error: Can't open module file 'matio.mod' for reading at (1): No such file or directory How can i load a module in order to use it in fortran through the GCC compiler?

View 1 Replies View Related

General :: Failed To Load "canberra-gtk-module": Libcanberra-gtk-module No Such File Or Directory

Mar 25, 2011

i installed firefox 4 and removed the old 3.X version. did a general update that my computer showed me was available then i noticed the first problem. firefox 4 would not launch when i clicked it, it would only launch when i clicked the gnome 3 applications button and then clicked and dragged the firefox logo to the desktop, then it opened. the second problem i am now having which at the moment is more bothersome is that after i closed the lid to my laptop and opened it up again after a while and logged back in and noticed that the ENTIRE gnome 3 environment was gone. no panel no menu nothing just the desktop and a few desktop icons. i tried the command "yum install gnome-shell" but it just sed that gnome 2.31.5-7 .fc14.i686 was already installed so it wasnt gonna do anything, then i tried the "gnome-shell --replace" command and it just said

failed to load "canberra-gtk-module": libcanberra-gtk-module no such file or directory.

View 5 Replies View Related

OpenSUSE Install :: Failed To Load Module "fglrx" (module Does Not Exist, 0)

May 8, 2011

I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:

Failed to load module "fglrx" (module does not exist, 0)

I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?

View 5 Replies View Related

General :: (EE) Failed To Load Module "vmwgfx" (module Does Not Exist, 0)

Jun 23, 2011

I cannot find the Xorg configuration file on my newly installed Debian on my tablet-pc, so I followed this tutorial [URL] and ran the command "Xorg -configure", to which I got the following error messages:

(EE) Failed to load module "vmwgfx" (module does not exist, 0)
(EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"

[code]...

View 2 Replies View Related

OpenSUSE :: "canberra-gtk-module" Error Failed To Load Module "canberra-gtk-module"

Jan 28, 2010

OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!

now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more

View 3 Replies View Related

Fedora Installation :: Update Error At Yum - Error Cannot Load Module

Jul 28, 2011

After 2 months away from Fedora i am using it again, and used yum update to update stuff, everything was running fine, downloaded stuff, but 2 of the 666 stuff to install got error, here is:

[code]...

View 8 Replies View Related

Ubuntu :: Not Able To Load Fb Module / Fix It?

Jun 10, 2011

This morning I came into my office and turned my computer on, per usual, but found that after about 10 minutes of waiting, I was still only getting the blinking cursor of waiting.

Since Ctr-Alt-Del did nothing, I held the power button down on the computer, and started again. This time I entered GRUB and chose the recovery mode, hoping for a fix disc option or some such.

However, what I was faced with was an ATA error that pointed to hard drive errors. (I can't remember what the exact error was now) So I pulled out my 10.10 install cd and booted into that.

I ran the fsck command until it returned no more errors, and rebooted. I waited for the login screen to come up, and was dismayed when it did - only command line style.

So I logged in and ran startx hoping to at least get something to show up on my screen, when it failed and gave me these errors code...

I was disappointed.

I won't bore you with the tales of my googling exploits and all the other things I've tried so far because the list would get extensive. So I ask you: Any ideas?

View 7 Replies View Related

Debian :: Nvidia Module Sometimes Won't Load

Jul 25, 2010

I'm fairly new to Debian, but during the past I've used Mandrake, Slackware and Ubuntu. Few months ago I've migrated from Ubuntu to Debian - I like it a lot but there is one thing which keeps bugging me.Sometimes - one of the few boots - nvidia module won't load and GDM won't start. During the "bad" boot system freezes for a while after the message "PME# disabled" and gives the message about nvidia GPU not supported. Because of that GDM fails to start.Below are the boot logs (without the leading time for easy diff comparison) - the "bad log" when nvidia fails to load and the "good log" when everything is OK. Any help?

View 14 Replies View Related

Debian :: Failed To Load Kernel Module

Jun 23, 2015

I'vd a problem with loading modules. Booting gives the this error:

Code: Select alllucas@debian8-1:~$ systemctl --failed
  UNIT                         LOAD   ACTIVE SUB    DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

[Code] ....

Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.

I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.

I've reinstalled Debian 8 several times. Still, both errors stay.

The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.

View 12 Replies View Related

Debian Configuration :: OpenVPN - Cannot Load Tun Module

Dec 16, 2015

I have recently rented a VPS server so I can run a VPN. Unfortunately, I did not get far in this [URL] ....., I have encountered this error:

Code: Select allxaver@xaver:/$ sudo modprobe tun
ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)

So I googled this error and found this: [URL] ....., however response of mine VPS was:

Code: Select allxaver@xaver:/$ ls /lib/modules/uname -r /kernel/drivers/net/tun.*
ls: cannot access /lib/modules/uname: No such file or directory
ls: cannot access /kernel/drivers/net/tun.*: No such file or directory

Code: Select allxaver@xaver:/$ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description:    Debian GNU/Linux 7.9 (wheezy)
Release:        7.9
Codename:       wheezy

xaver@xaver:/$ uname -a
Linux xaver 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u1 x86_64 GNU/Linux

View 2 Replies View Related

Debian Programming :: Failed To Load Module

May 30, 2015

I was playing around with QT5 today and I am getting the error Gtk-Message: Failed to load module "canberra-gtk-module". Searching suggested that the module may not be installed however it looks like it is to me.

Code: Select allii  libcanberra-gtk3-0:amd64              0.30-2.1                            amd64        GTK+ 3.0 helper for playing widget event sounds with libcanberra
ii  libcanberra-gtk3-module:amd64         0.30-2.1                            amd64        translates GTK3 widgets signals to event sounds
ii  libcanberra-pulse:amd64               0.30-2.1                            amd64        PulseAudio backend for libcanberra
ii  libcanberra0:amd64                    0.30-2.1                            amd64        simple abstract interface for playing event sounds

[code]....

View 3 Replies View Related

OpenSUSE Hardware :: Sata_Sil Module Will Not Load

Apr 18, 2010

I have recently installed Silicon Image S3114 Raid Controller. It has support via the sata_sil module. It shows up in the diskcontroller information, however the module will not load. The reason being, it does not exist. I checked the directory and sure enough the compiled module sata_sil is not present. Also, I am weary about updated my kernel because of the trouble I had finding a os level that would run this dinosaur.
Suse 10.1
Kernel 2.6.16.21 for ppc

View 1 Replies View Related

General :: Automatically Load Kernel Module?

Aug 6, 2010

I'd like openSUSE to automatically load a kernel module (e.g. libsas) at boot time even no device requires it. In Ubuntu, you would add the module name to the file /etc/modules. Is this the correct place for openSUSE as well?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved