When I try:
Code:
sudo add-apt-repository ppa:gdm2setup/gdm2setup
Code:
sudo apt-get update
Code:
sudo apt-get install python-gdm2setup
On the update I have error in terminal:
Code:
W: Failed to fetch [URL] 404 Not Found
W: Failed to fetch [URL] 404 Not Found
E: Some index files failed to download. They have been ignored, or old ones used instead.
I have an "error", its not really and error, every time I open the terminal, it shows this:
Reading: command not found
Building: command not found
Reading: command not found
*****@****-****:~$
Is anyone else having trouble...I'm getting a ton of "Failed to fetch..." errors while updating.The site itself is working fine. No news here [URL]. Normally I wouldn't be concerned, however this happened right when I modified my sources so I'm hoping I didn't mess something up.
View 1 Replies View RelatedCould not download all repository indexes
The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct.
Failed to fetch url 404 Not Found
Some index files failed to download, they have been ignored, or old ones used instead.
Im using 10.04.
Connection is fine. Maybe something wrong with server or any of my repository
after i installed some linux mint packages, i get the following error. W: GPG error: http://ppa.launchpad.net lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 55708F1EE06803C5
its not related to the mint packages because i installed the keyring for that and since the error i have unchecked the linux mint repo. i have tried reinstalling the ubuntu-keyring package with no luck.
From the start ive been using ubuntu .and now im using lucid 10.04, what I see when I turn on update the multiverse and universe and the others, what I found is, Error. Here are the error from my terminal . It just annoys me, for now, I don't have any problem with any of it yet, and I don't want to have one.
Code:
adib@adib-desktop:~$ sudo apt-get update
[sudo] password for adib:
[Code]...
While I am trying to install updates following error is displayed
W:Failed to fetch url 404 Not Found
, W:Failed to fetch url 404 Not Found
, E:Some index files failed to download, they have been ignored, or old ones used instead.
My internet conection is good, I've installed some updates months ago.
I have tried downloading including the launchpad ppa and wanted to install shotwell, but get the following error:
libgexiv2-0: Depends: libexiv2-6 but it is not installable
shotwell: Depends: libexiv2-6 but it is not installable
Depends: sqlite3 (>= 3.5.9) but it is not installable
Depends: libraw-dev (>= 0.9.0) but it is not going to be installed
This is more technical. I installed F12 and then I tried to update the system (system - administration - softwareupdate). I receive the following error:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
Is there a need to set more my repo?
i have a dual boot system set up right now through wubi. the installation went fine. but then i tried to upgrade ubuntu from 10.04.2 to 10.10. the update went fine, no errors. but afterwards when i restarted my computer and selected ubuntu, it said "error: file not found" it didn't even get to grub. this has happened numerous of times trying to upgrade in the past.
p.s: i have vista installed as the other side of the dual boot.
Recently I've installed Open Suse 11.3 along with Ubuntu 9.10 on my PC ( made it a dual-boot OS ). This morning while logged in, in Open Suse 11.3, found out that there were important update for kernel in Yast. So, did the update and then required to restart the PC. In the Grub/boot menu, I chose to log-in to Open Suse 11.3, but after a while it returned with " Error 15, file not found ". Luckily I was able to log-in in Ubuntu 9.10. Assumed that Error 15 is always related to misplaced or wrong configuration of Grub in the partition, I did several searching via Google, and found this possible solution HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive . So I tried the " Broken Grub menu: boot to the menu, drop to a console and boot openSUSE direct " method. But rightly after the " find /boot/grub/menu.lst " command as instructed in the solution, it returned with ( hd0,0 ) and ( hd0,4 ). Why there are 2 bootloader in the Grub ? Which bootloader should I choose ? And for convenience, here is my " menu.lst " folder that I get via Terminal in Ubuntu 9.10 :
$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
[code]....
I've got the following problem: I just noticed that there were just very few notifications about updating the system (usually there are damn many of them in a week) So I opened the update manager and clicked on "refresh list". The following result popped up: p,li{white-space:pre-wrap;}E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found First I thought, it would be just some kind of server problem, but it didn't stop. The next thing was to research the thread and I even found something. However, the solution suggested didn't work at all. (Things, which might have caused this: I installed the default software center |I'm using Kubuntu, but in this case that fact doesn't matter| and used it. To sum up:
- not able to update the system referring to the launchpad main sources for 11.04
- following error: E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found It would be great if this was a common issue and I've been simply too stupid to find a proper solution. So you could just post the link.
I have recently updated my GNOME installation from 3.x to 3.14. Suddenly, there are many glitches. The power buttons on the power menu does nothing, I am forced to shut down via the terminal, everything goes black every now and again, and there is a weird colour pattern behind some icons when I hover over them. But most importantly, the icons and text do not show up on the "Activities -> Show Applications -> All" menu. They still there, as you can see the opening animation before they disappear, and I can click on them, but you just can't see them. The "Frequent" menu works fine. Here is a YouTube video I have made to explain my problem.
[URL] ...
I did change the icons, but this was after these problems started happening, and so it should be un-related.
Here's the details to this mornings update error:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
code....
It mentioned bug report but I don't know where that is. I'll try later.
I switched to Ubuntu a few months back and now have a problem I can't figure out and would like a little guidance. When trying to run Terminal or Synaptic I get the following error... E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.
View 2 Replies View RelatedI just installed Fedora Core 12 and when attempting use the update utility am receiving the following error:
[code]...
I have a home network with one computer with ubuntu and two laptops with vista and one router. Last month, ubuntu could access files on vista machines and vista machines could access files on ubuntu machine. Everything great. The only change was an update to ubuntu 10.10 in april. After the update, the ubuntu machine can access files as before, but I get "The network name can not be found" the connection has not been restored". What changed in the last update, and what must i do to restore access to Ubuntu files?
View 1 Replies View RelatedWhenever I boot my fedora 12, even before asking me for my login name, etc., there comes a message saying "Can't update IECauthority file : /var/gdb/.IECauthority" and hangs at the place. Even the mouse doesn't move. If I were able to open the terminal somehow, perhaps by changing the file permissions, I could get something. Also, when I boot from ubuntu 9.10 and try seeing what's in the /var directory of fedora, it doesn't show anything, even if I display the hidden files. If the directory gdb doesn't exist, why is it showing the error ?
View 7 Replies View Relatedevery time i try to update my computer i get this message administrator@desktop:~$ sudo aptitude upgrade W: The "upgrade" command is deprecated; use "safe-upgrade" instead. Reading package lists.Done Building dependency tree Reading state information. Done Reading extended state information Initializing package states.. No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used.
[Code]...
When i do update from Terminal, i dont get all updates which are in Update manager. Why?
Code:
sudo apt-get update
sudo apt-get upgrade
just bought two new monitors , having major problems installing them,ubuntu 10.04 didnt recognize them at all running at 800x600 they should run at 1920x1080.
i have found various web pages explaining how to adjust the resolution using terminal . the problem i am having that nearly every command i put in commes back with command not found , i thought i needed to be signed in asroot so did this but still the same problem .
I am installing ubuntu lucid at Amazon Elastic Cloud.
The info is as below code...
I want to find out where is Applications > Accessories > Terminal
Under the Applications, don't have Accessories submenu.
As soon as I launch terminal I get the following:
[...]: command not found
[...]: command not found
And it then goes to a $~ prompt as usual. How do I make it so the two commands it is trying to launch don't run upon launching terminal?
So I have a hard drive with about 700 gb of movies on it and i plugged it in via USB and it didn't show up anywhere. So i then tried to plug it into the computer any way i could finally i tired another external case and now it is found (sorta).I open my /media folder and there it is a drive labeled Movies it had an x and it said i couldn't open it no permissions so i added permissions. now i open it and it says no files but only 160 gb space remaining on a 1 tb drive. so when i run fdisk -l i get this:
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
[code]....
i am a ubuntu user for about a year now. i ok with most things. but ive noticed the only things i can use are ones that are supplied for me. so i been trying to figure out how to install new programs not just from synaptic and the ubuntu add/remove. my issue is i have ubuntu 11.04 and i cant get my extracted tar.gz file to be recognized in terminal.
i first put cd home/nicholas/desktop/ndiswrapper-1.56 then nothin it just says no file or directory found. now i thought this was supposed to be a basic comand. am i missing something? is there a new way to write it now that were using 11.04 and not 10.10?
I'm messing around with a new install of Debian 8, trying to get a sandbox of Oracle DB 12c up and running in an ESXi environment.
open-vm-tools was giving me troubles (resizing the window didn't make the resolution change), and Oracle DB was fighting me with environmental variables.
Well, while I was troubleshooting the Oracle issue, I needed to reboot. When it came back up, I couldn't log in. When I attempt to log in using known working credentials, the screen goes black like it should, and then loads the login screen again.
I SSH into the box and try to run commands, but every single command I run returns "Command not found" including "ls" "su" "cd".
I'm able to boot into recovery mode, where the commands work under root, but I'm not sure what to fix....
I was installing last night some applications , then i forgot to plugin my laptop so suddenly it turned off , anyways today i turned it on , while booting it gave me this error : "error where found when mounting the disk file /"so i press I to ignore , and it works , but now how can i fix this error?
View 1 Replies View RelatedI just installed Xubuntu 11.04 via wubi. Whenever I would attempt to do a normal install, the graphics would seem to crash and the screen would become distorted and basically just blocks of black and white. So I tried to do it in graphics safe mode, which succeeded. However, now I cannot start the Xubuntu GUI, and I get the error message "Display not found".
View 1 Replies View RelatedAnyone else having problems connecting to Launchpad?
View 4 Replies View Relatedi just installed ubuntu and i wanna put wine on so i can install my itunes and adapters an so on. but when i try to install through terminal it always reads that theres no file found or cant complete installation. and theres no net hooked up to it cuz the wireless adapter wont work.
View 3 Replies View Related