just bought two new monitors , having major problems installing them,ubuntu 10.04 didnt recognize them at all running at 800x600 they should run at 1920x1080.
i have found various web pages explaining how to adjust the resolution using terminal . the problem i am having that nearly every command i put in commes back with command not found , i thought i needed to be signed in asroot so did this but still the same problem .
As soon as I launch terminal I get the following:
[...]: command not found
[...]: command not found
And it then goes to a $~ prompt as usual. How do I make it so the two commands it is trying to launch don't run upon launching terminal?
I have an "error", its not really and error, every time I open the terminal, it shows this:
Reading: command not found
Building: command not found
Reading: command not found
*****@****-****:~$
I am using CentOS5.5 & everytime it is showing command not found. If I export the path as below it will be working fine until a reboot. Again same error i.e command not found if I open new terminal. Every time I am exporting as below:
#export PATH=/sbin/:$PATH
#export PATH=/usr/sbin/:$PATH
#export PATH=/usr/bin/:$PATH
#export PATH=/bin/:$PATH
How can I set these permanently as that the paths should automatically be exported for everyone user whenever the system boots. And command completion also should happen for eg. #fdi (press tab), then it should show available options such as fdisk, etc.
I got a problem with terminal, since i'm really a noob with terminal i don't know how to fix it.Everytime i type in a command it shows for example:
-bash: ls: command not found
Even the basic commands don't work... just cd <directory> and those things works
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
What is the command for "Open a terminal window and run application in this terminal
View 4 Replies View RelatedI know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
Is it possible to make terminal (xfce4-terminal) transparent from bash script?
Maybe by enabling compostion?
In Ubuntu 10.04 grub command prompt setup command does not exist for installing grub.I am trying to recover my Feodra12 OS.Did anyone find alternate command for setup in grub command line for Ubuntu 10.04 ?
View 2 Replies View RelatedI installed the Berkeley DB on the Ubuntu server and tried to access the dbxml from the command line and it returns command not found
path/to/dir/dbxml-2.5.16/install/bin$dbxml
-bash" dbxml: command not found
Can someone point me in the right direction
how to pass something more than a one-command startup for gnome-terminal. I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
[code]....
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
I am a linux newbie, and recently started shell programming. whenever I use 'let' command it gives me an error 'command not found'. I am using ubuntu 9.10 with bash.
View 5 Replies View RelatedI am using openSUSE 10.3.When I install software from tarball then to record time required I send output of date to beg.txt(when installation begins) and end.txt (when installation finishes).How can I append output of date to a file so I don't need two files?
View 4 Replies View RelatedI am trying to learn how to pass more than a one-command startup for gnome-terminal.
I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
USAGE="
${0##*/} [-x] [-g]
code....
However, running with the -g option to invoke gnome-terminal, I get a "There was an error creating the child process for this terminal" error.
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
I am installing ubuntu lucid at Amazon Elastic Cloud.
The info is as below code...
I want to find out where is Applications > Accessories > Terminal
Under the Applications, don't have Accessories submenu.
I'm trying to install the projectM visualizer and I'm running into some problems. Initially, I tried to install it by running "sudo apt-get install libvisual-projectm", which seemed to work... except there's no launcher for it in my Applications menu and "projectM-pulseaudio" returns "command not found". From there, I decided to try to build it myself, by following this guide (<- link). It went well until the "make" command, which returns the following error:
[Code]....
So I have a hard drive with about 700 gb of movies on it and i plugged it in via USB and it didn't show up anywhere. So i then tried to plug it into the computer any way i could finally i tired another external case and now it is found (sorta).I open my /media folder and there it is a drive labeled Movies it had an x and it said i couldn't open it no permissions so i added permissions. now i open it and it says no files but only 160 gb space remaining on a 1 tb drive. so when i run fdisk -l i get this:
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
[code]....
i am a ubuntu user for about a year now. i ok with most things. but ive noticed the only things i can use are ones that are supplied for me. so i been trying to figure out how to install new programs not just from synaptic and the ubuntu add/remove. my issue is i have ubuntu 11.04 and i cant get my extracted tar.gz file to be recognized in terminal.
i first put cd home/nicholas/desktop/ndiswrapper-1.56 then nothin it just says no file or directory found. now i thought this was supposed to be a basic comand. am i missing something? is there a new way to write it now that were using 11.04 and not 10.10?
When I try:
Code:
sudo add-apt-repository ppa:gdm2setup/gdm2setup
Code:
sudo apt-get update
Code:
sudo apt-get install python-gdm2setup
On the update I have error in terminal:
Code:
W: Failed to fetch [URL] 404 Not Found
W: Failed to fetch [URL] 404 Not Found
E: Some index files failed to download. They have been ignored, or old ones used instead.
I'm messing around with a new install of Debian 8, trying to get a sandbox of Oracle DB 12c up and running in an ESXi environment.
open-vm-tools was giving me troubles (resizing the window didn't make the resolution change), and Oracle DB was fighting me with environmental variables.
Well, while I was troubleshooting the Oracle issue, I needed to reboot. When it came back up, I couldn't log in. When I attempt to log in using known working credentials, the screen goes black like it should, and then loads the login screen again.
I SSH into the box and try to run commands, but every single command I run returns "Command not found" including "ls" "su" "cd".
I'm able to boot into recovery mode, where the commands work under root, but I'm not sure what to fix....
I just installed Xubuntu 11.04 via wubi. Whenever I would attempt to do a normal install, the graphics would seem to crash and the screen would become distorted and basically just blocks of black and white. So I tried to do it in graphics safe mode, which succeeded. However, now I cannot start the Xubuntu GUI, and I get the error message "Display not found".
View 1 Replies View RelatedI am doing some embeded linux work in ARM 9263.So I need to make a image for that board.But when I using one command "make uImage" I am getting the following error.
make: arm-linux-gcc: Command not found
CHK include/linux/version.h
make[1]: `include/asm-arm/mach-types.h' is up to date.
CHK include/linux/utsrelease.h
HOSTCC scripts/basic/fixdep
code....
i just installed ubuntu and i wanna put wine on so i can install my itunes and adapters an so on. but when i try to install through terminal it always reads that theres no file found or cant complete installation. and theres no net hooked up to it cuz the wireless adapter wont work.
View 3 Replies View RelatedI'm wondering whether my server has been hacked by someone trying to cover their tracks. When I log in now, I get a message saying "bash: /bin/ls: No such file or directory", and although 'which ls' tells me it's '/bin/ls', it is as if the command does not exist. Note that this NOT a path issue: I get the error when typing '/bin/ls' (and '/usr/bin/ls', which I thought worth trying). I tried to 'sudo chmod +x /bin/ls' and the operation was not permitted.
OK, so thinking I'd somehow hosed things, I did 'sudo apt-get install --reinstall coreutils', hoping to reinstall ls etc. I get this:
Code:
Preparing to replace coreutils 8.5-1ubuntu3 (using .../coreutils_8.5-1ubuntu3_amd64.deb) ...
Unpacking replacement coreutils ...
dpkg: error processing /var/cache/apt/archives/coreutils_8.5-1ubuntu3_amd64.deb (--unpack):
[Code]...
I a new user of ubuntu.I got this strange problem when I was doing an installation. The command is just in the folder, but the installation says it's not there. I have tried to re-install tcl/tk package in ubuntu, but it doesn't work. Could anybody help me out on this issue
View 5 Replies View RelatedI downloaded ff 4 tar.bz.2 file ,extaracted to root opened firefox folder and ran from there,but ff 3.6 was still there so i used sudo nautilus to remove the old ver. Now to run ff i have to open root/firefox and there is a script file i use to run ff,if i type firefox in the terminal i get command not found msg.
View 5 Replies View RelatedI am running gNatty ubuntu 11.04. before yesterday, the Alt+F2 then type in gnome-tweak-tool would successfully open the Advanced Settings in application. But now it shows "command not found", same thing for gnome-terminal...Is there anyway to fix this? What package is the ALT+F2 related to?
View 8 Replies View RelatedEvery time I open my terminal a warning message shows up. The warning is the following:
Code: Select allwarning: output DFP2 not found; ignoring
There is no output DFP2 in my system. I ran xrarndr and the outputs are the following:
Code: Select allScreen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm
1920x1080 60.00*+
1680x1050 59.95
1600x900 59.98
1280x1024 75.02 60.02
[Code] ......
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 477mm x 268mm
1920x1080 60.00*+ 50.00 59.94
1680x1050 59.88
1600x900 59.98
1280x1024 75.02 60.02
[Code] ....
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
I'm new to this and trying to install flashplugin to the terminal. I entered apt-get install flashplugin-nonfree, and it says package not found. What do i do. I can't install yahoo messenger without it or see any videos on ..... or any thing that requires adobe.
View 14 Replies View Related