As soon as I launch terminal I get the following:
[...]: command not found
[...]: command not found
And it then goes to a $~ prompt as usual. How do I make it so the two commands it is trying to launch don't run upon launching terminal?
can't find where is gksudo, it is a part of some pakage but witch one?
View 7 Replies View RelatedI've created a QT interface with some buttons and labels, and i want to launch a terminal command with one of these buttons,but the command maust starts with "sudo",unfortunately it didn't work because it wants root password and i can't enter it even in the Button cammand....
View 6 Replies View RelatedI want to have a script (tcsh/bash/python) that launches a bunch of gnome-terminals (or 1 with multiple tabs). And I want it to execute a command, but keep the shell interactive. Currently, if you type gnome-terminal then it launches a new interactive shell, but if you give it the execute flag, then it executes the command and quits (or stays open, but non-interactive depending on the users gnome-terminal settings).
I have this command which I want to run automatically before I start working. What the command does is dynamic and different for each shell. It takes arguments. So it's not something I can take care of in a .cshrc type file.
just bought two new monitors , having major problems installing them,ubuntu 10.04 didnt recognize them at all running at 800x600 they should run at 1920x1080.
i have found various web pages explaining how to adjust the resolution using terminal . the problem i am having that nearly every command i put in commes back with command not found , i thought i needed to be signed in asroot so did this but still the same problem .
I have an "error", its not really and error, every time I open the terminal, it shows this:
Reading: command not found
Building: command not found
Reading: command not found
*****@****-****:~$
I am using CentOS5.5 & everytime it is showing command not found. If I export the path as below it will be working fine until a reboot. Again same error i.e command not found if I open new terminal. Every time I am exporting as below:
#export PATH=/sbin/:$PATH
#export PATH=/usr/sbin/:$PATH
#export PATH=/usr/bin/:$PATH
#export PATH=/bin/:$PATH
How can I set these permanently as that the paths should automatically be exported for everyone user whenever the system boots. And command completion also should happen for eg. #fdi (press tab), then it should show available options such as fdisk, etc.
I got a problem with the terminal in GUI Environment after i upgraded it From debian 7 to 8 "it's not launching" ....
Root Terminal is Working....
Problem with use of -hold|+hold on rxvt-unicode (urxvt) v9.09 on ubuntu server. On startup, I'm trying to launch terminal apps in urxvt automatically. E.g:
Code:
"urxvt -e /usr/bin/weechat-curses +hold"
or
Code:
"urxvt -hold -e mutt"
However, -|+hold does not seem to hold the terminal open. There is a flicker of a new window opening & then it's gone. I'm trying to invoke this from .xinitrc (startx-->.xinitrc) and also tried commands from inside awesome wm rc.lua (awful.util.spawn_with_shell("urxvt -hold -e mutt") seem to get same flicker result but closes immediately. I see this error in .xsession-errors, which might be relevant (do I perhaps need to specify the display??).
Code:
[1461:1634:41805904:ERROR:all_status.cc(117)]
Unrecognized Syncer Event: 7
E: awesome: a_xcb_io_cb:230: X server connection broke
urxvt: X connection to ':0' broken, unable to recover, exiting.
Code:
rxvt-unicode (urxvt) v9.09 - released: 2010-11-13
options: perl,xft,styles,combining,blink,encodings=eu+vn+jp+jp-ext+kr+zh+zh-ext,fade,transparent,tint,afterimage,XIM,frills,selectionscrolling,wheel,slipwheel,smart-resize,cursorBlink,pointerBlank,scrollbars=plain+rxvt+NeXT+xterm
Usage: urxvt [-help] [--help]
...
[-n string] [-sl number] [-embed windowid] [-depth number]
[-/+override-redirect] [-pty-fd fileno] [-/+hold] [-w number] [-b number]
[-/+bl] [-lsp number] [-letsp number] [-/+sbg] [-mod modifier] [-/+ssc]
[-/+ssr] [-pe string] [-blt string] [-e command arg ...]
Code:
~$ awesome -k
✔ Configuration file syntax OK.
link to urxvt man: [URL]
How do I stop a user, from gaining access to the internet(port) via a restricted browser? In other words, I want a general user to only to have access to Firefox and no other browsers.
My first approach so far, has been to write a bash shell script. It terminates a program based on keywords from known browsers (opera, asus, ect).
Is there a way to run graphical apps as su without launching from the terminal? For example is there a way to open File Browser as su? And if the only way is via the terminal, then how can I find out the names of apps like the File Browser so I can launch them?
View 8 Replies View RelatedI'm a little confuse regarding how one launches tmux. When I launch my terminal (current gnome-terminal), I would like to have tmux up and running. I'm currently doing this by calling "tmux" in my .zshenv (kind of like .bashrc in bash). This does in fact launch tmux, but has some annoying side effects. First, hitting Ctrl-D to exit the shell, only kills tmux, and leaves the tmux-less gnome-terminal still running. An additional Ctrl-D will kill that as well. Second, when ssh into a box with this setup, I get a second, nested instance of tmux. I don't want tmux to launch again when I ssh. Is this the right approach, how should tmux be launched usually?
View 2 Replies View RelatedAnyone know how to launch a program from CLI (command line) to a specific viewport? I start programs all the time from the CLI and there are times when I'm in "typing demon" mode and don't want to touch the mouse. Being able to launch a program to a certain viewport (Compiz, w. effects) would be really helpful at times.
I'm familiar with wmctrl and i can use the -a and -c options to switch to and close windows fine. I only have 1 desktop (9 viewports, though), and wmctrl's support for viewport seems limited at best. Ideally, I'd like to launch a program to a specific viewport, but just being able to move an existing one to a specific viewport would work, too.
Please note: I'm talking about moving apps to viewports AD HOC or DYNAMICALLY, not in a fixed way like I believe devilspie and such (and Compiz' Place plugin). Depending on my task, I need to quickly launch several apps to different viewports, and this VARIES for me a lot. ubuntu 10.04 lts / gnome / compiz w. full effects
I just added 8 additional vncserver sessions(Xvnc) (using a well-documented procedure my predecessor used) to my RH Enterprise 2.4.21-4 (OK it went by fast) server. This brings the number of session listed in my /etc/sysconfig/vncservers file to ~32. Applications and terminals now seem to choose if they will open or not in the Xvnc session and not all sessions start at boot. I can start them manually, and they will work, but then they stop working properly. You can open a session, view the active desktop, click on menus and associated drop-down items to try and open apps, but the apps/terminals just won't open. Is there a limit to the number Xvnc Sessions that can be managed? If so, what is it? This happens whether I try to connect from a Winddows box or another Linux box.
View 3 Replies View RelatedHaving logged in (to Fedora 11) with a terminal session, what command do I give to spawn the Gnome GUI desktop environment? Background: I'm running two Fedora boxes: one local, and one at the other end of my building (on fast LAN). I have full control/ownership of both boxes.
On the local box, I log-in to my vanilla F11 build, and I get the Gnome GUI automatically. Then I can open a terminal window, 'ssh -X -l myself remotebox; cinelerra' to run Cinelerra nicely in local desktop windows.
But sometimes I want to see my typical user desktop for the remote box. Now, IF the remote box is ALREADY running Gnome, I can VNC to it, etc. But, once having logged-out of the remote box, VNC closes and won't show me a GUI login page. (BTW: The remote box usually has no monitor, as well as being out of reach. So schlepping over to logon to it is a real pain.) So, here's the thing: I can login (to terminal session) and can bring up programs in local windows. But WHAT program do I launch in order to bring up Gnome??
I got a problem with terminal, since i'm really a noob with terminal i don't know how to fix it.Everytime i type in a command it shows for example:
-bash: ls: command not found
Even the basic commands don't work... just cd <directory> and those things works
When I open a gtk app from the command line this error pops up:
Code:
Gtk: Unable to locate theme engine in module_path: "clearlooks", and I can not find clearlooks theme engine anywhere as it is supposed to be part of gtk by default?
How do you launch a task from a terminal command line interface and it not be kill'ed if you close the terminal window. Like if I run jedit I type jedit & which launches jedit as a backgorund task. But, if I close terminal window, jedit dies to. How do I laucnch jedit and completely divorce it from the terminal task?
View 6 Replies View RelatedI installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
What is the command for "Open a terminal window and run application in this terminal
View 4 Replies View RelatedI know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
Is it possible to make terminal (xfce4-terminal) transparent from bash script?
Maybe by enabling compostion?
In Ubuntu 10.04 grub command prompt setup command does not exist for installing grub.I am trying to recover my Feodra12 OS.Did anyone find alternate command for setup in grub command line for Ubuntu 10.04 ?
View 2 Replies View RelatedI installed the Berkeley DB on the Ubuntu server and tried to access the dbxml from the command line and it returns command not found
path/to/dir/dbxml-2.5.16/install/bin$dbxml
-bash" dbxml: command not found
Can someone point me in the right direction
how to pass something more than a one-command startup for gnome-terminal. I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
[code]....
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
I am a linux newbie, and recently started shell programming. whenever I use 'let' command it gives me an error 'command not found'. I am using ubuntu 9.10 with bash.
View 5 Replies View RelatedI am using openSUSE 10.3.When I install software from tarball then to record time required I send output of date to beg.txt(when installation begins) and end.txt (when installation finishes).How can I append output of date to a file so I don't need two files?
View 4 Replies View RelatedI am trying to learn how to pass more than a one-command startup for gnome-terminal.
I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
USAGE="
${0##*/} [-x] [-g]
code....
However, running with the -g option to invoke gnome-terminal, I get a "There was an error creating the child process for this terminal" error.
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
I am installing ubuntu lucid at Amazon Elastic Cloud.
The info is as below code...
I want to find out where is Applications > Accessories > Terminal
Under the Applications, don't have Accessories submenu.
I'm trying to install the projectM visualizer and I'm running into some problems. Initially, I tried to install it by running "sudo apt-get install libvisual-projectm", which seemed to work... except there's no launcher for it in my Applications menu and "projectM-pulseaudio" returns "command not found". From there, I decided to try to build it myself, by following this guide (<- link). It went well until the "make" command, which returns the following error:
[Code]....
