Ubuntu :: Functionality Lost With 10.04 LTS?
May 7, 2011
I finally upgraded my desktop from 9.10 to 10.04. I do not feel that this was a step forward; a lot of little things just don't work. For example, when shutting down with 9.10, it automatically shuts down in 60 seconds. With 10.04, it waits *forever* for a 2nd mouse click.
The USB drive - there used to be an option to un-mount it without removing it. That's gone now, and I'm guessing that I will find more of these as the days go on. And all the colors have been removed from the panel applets. Not really a functionality issue, but it is a negative to the user experience.
So my question is: How can I restore these features? Is there a configuration somewhere I can edit?
View 3 Replies
ADVERTISEMENT
Jul 16, 2010
my keyboard lost it functionality as it was used to be, something went wrong and im not sure what but it seems something wrote those settings to my pc's ROM or something.Since i used the ubuntu and then the layout screwed up, I dont know what else to do as it seems it affected my windows too, i tried to recover to an older version of ubuntu that i had (as in i made a system backup using acronis) with all the things working right but it seems it wont help as the settings saved itself and I dont know where to change it back. im in such a panic as this thing never happen to me before ctrl is right ctrl, right ctrl funtion as the FN key, the whole FN+Fx are wrong
View 5 Replies
View Related
Jul 8, 2011
I tried to edit my xorg.conf to try and encourage Debian to handle my joypad better (stop recognising it as a mouse). However, it didn't work and i couldn't get back into X.So, i entered recovery mode and deleted the contents of xorg.conf,got back into X and then edited xorg.conf back to how it was.Right so far so good.Yet, now i cannot use the backlash key in keyboard shortcuts. I have a number of shortcuts set up to incorporate this key and they no longer work, neither in GNOME nor Openbox
View 2 Replies
View Related
Dec 7, 2009
Initial FC12 install worked great, kernel 2.6.31.5-127.fc12.x86_64 allowed radio kill switch functionality Fn-F11 for wlan and Fn-F12 for bluetooth.The last two kernels have broken that functionality.
Fedora (2.6.31.6-162.fc12.x86_64) broken!
Fedora (2.6.31.6-145.fc12.x86_64) broken!
Fedora (2.6.31.5-127.fc12.x86_64) works!
[code]...
View 1 Replies
View Related
Dec 10, 2010
Linux-goers. I did some research on this, but I am still fairly new to Linux. In Ubuntu 10.10 (Maverick), I accidentally overwrote my "/bin/bash" file. Dude, using "sudo" with a small typo can work disasters. Bash is now broken in the Terminal (gnome-terminal). Terminal itself still works fine, technically, but bash is still hosed/broken. Here is what I did to try to fix it: Booted from Ubuntu 10.10 live CD. Mounted my Ubuntu partition and manually copied the good/fresh "bash" file onto my hard drive. Verified copy was successful. Didn't help, as you see. Reinstalled "gnome-terminal" using synaptic package manager. Tried to reinstall bash via synaptic, it failed with error, "E: /var/cache/apt/archives/bash_4.1-2ubuntu4_i386.deb: subprocess new pre-removal script returned error exit status 2"
In Terminal, all basic commands work as far as I can tell. ("ls", "pwd", navigation, etc.) Here are some problems:My "username@computername" does not display in the prompt; only the $ sign. Bash keyboard shortcuts such as uparrow and tab do not work. Instead, each inserts a key code. I can't even move the cursor left/right. Aliases (a function of bash and .bashrc) are broken, of course. My sanity level decreases when I use Terminal now. For what it's worth, even with "sudo" I get a "permission denied" error when trying to run Google Chrome! I read something about a ".bashrc" file being a possible problem, but I don't know how to make it work, or the file's proper locations in Ubuntu 10.10. Is there something I can do with a "make" or "apt-get install" command or something?? Could this simply be a permissions problem? Is the link to "/bin/bash", "/bin/sh", or a ".bashrc" file broken? Guide me, oh Linux gurus.
P.S. I always wondered what exactly bash was and how it was different from the basic terminal. LoL, this is an excellent way to demonstrate the difference, and I WANT IT BACK!
View 9 Replies
View Related
Apr 7, 2010
I tried Linux Mint 8 for awhile and seem to remember that System/Administration/Disk Utility gave a lot more useful information than what is available in Ubuntu. It showed the partitions as being healthy or not and even gave the temperature of the hard drive and if the disk is failing. Is there any way to get this same functionality in my Ubuntu 9.10 configuration?
View 1 Replies
View Related
Jun 20, 2010
I've been holding out on the recent few versions of Ubuntu because of the recent changes, so I was just wondering if 10.10 will bring back some of those lost features.
1. Will we see a way to have a customisable login screen?
2. Will there be an option to move the close button as a standard setting?
View 4 Replies
View Related
Feb 4, 2011
Is there anything for Ubuntu 10.04 similar to vmware fusion for MAC. I know there is vmware for ubuntu, but what about something with the functionality of Fusion?
View 3 Replies
View Related
May 6, 2011
I've recently started using Emacs and find switching between different buffers using the menu to be inconvenient. Is there any mode or trick that allows functionalitry like Alt-tab?
View 3 Replies
View Related
Feb 12, 2010
Im looking for magnifying glass functionalty for ubuntu. I want to use it for web design: watching icons, borders, spaces, etc. I tried the compiz zoom, enhanced zoom and mynifying box bout all of them make things blurry and I couldn't find the way to make things "sharp". Is there such an option for those plugins or an alternative way to have that functionality?
View 8 Replies
View Related
May 30, 2010
I installed the NFS functionality into Ubuntu 10.04, hoping to have a home file system. However, mounting it seems to be a challenge. When I mount on the server its self, it works fine. But on other computers. Such as my windows 7 machine, the connection times out. It seems to make the inital connect, then none after that. (The windows 7 machine does have the NFS files installed).
View 3 Replies
View Related
Aug 5, 2010
When the Caps Lock LED is lit, everything is lowercase. When not lit, everything is uppercase.
Caps lock is working opposite way. it happen when i was using openoffice sheet.
anybody know what to do ?
View 1 Replies
View Related
Nov 2, 2010
Ubuntu works pretty well on most of the desktop computer (drivers support), the basic functionality like, keyboard, sound card, network card generally works well. But when it comes to laptop computer, really need luck. Some laptop's keyboard works weird, some cannot play music. I am recently thinking of buying a new laptop. Is there any website shows you which brand of laptop recommends which version of linux? or ubuntu works better on which brand of laptop?
View 3 Replies
View Related
Nov 25, 2010
I'm rolling out Ubuntu in our call center at the moment and I'd like to disable the 'Delete Panel' functionality, I wana keep things as default as possible.
View 2 Replies
View Related
Aug 19, 2011
From what I understand aptitude and apt-get are both valid package management tools and it should not matter which one you use (of course the user interface is different, but the basic functionality is the same). I found something which makes me believe there are differences: I ran aptitude install gnome-themes-more and it did nothing because the package was already installed. Then I ran apt-get install gnome-themes-more just to see the difference, and it also did not install anything, but it marked the package as manually installed.
The I ran again apt-get install gnome-themes-more and this time the package was not marked as manually install (obviously because it's already marked). This makes me believe that aptitude did not mark my package as manually installed (I would have pasted the command output as well, but I don't have it anymore). So, is the core functionality of those tools the same or not?
I used until now apt-get and wonder if I should have used aptitude. I have found some wikis which recommend the usage of aptitude but I could not find out if this reccomendation is based only on the UI improvements or are there also improvements in the core functionality. I'd like some hints from more seasoned debianers about which one to use, or whether it matters. I'm maily using command line, so user interface is not an issue,
View 14 Replies
View Related
Mar 20, 2010
I just installed a fresh copy of 9.10. My problem is the way Workspace Switcher 2.28.0 (the default of the installation) with compiz running (I haven't tried without compiz) Old behaviour: (9.04 and 8.10) a) rolling the mouse wheel over a workspace of the workspace switcher means: move to the next or previous workspace b) click on a the representation of a window (a little square) on the the workspace switcher and then drag it to another workspace means: move window to other workspace
In 9.10 the workspace switcher does work (the number of workspace can be configured, Ctl-Alt-left & right arrow, Ctlr-Shiht-Alt-right&left arrow) but the functionality described in a and b is missing.
[Code]...
View 4 Replies
View Related
Aug 10, 2010
I've seen many posts about setting up VPN's but my doubt goes further. I just need access to the local network of my office from a Windows XP (which of course is outside the LAN). I would like this PC to have access to the whole LAN, but what I really need is it to access to an Ubuntu Server (e.g. 192.168.0.10). The router is a Netgear DG834, which has a built in VPN functionality. So, is it enough if I set it up? Do I need to install any VPN server in Ubuntu? What if I want to access to another computer in the LAN? Where should I start?
View 4 Replies
View Related
Dec 17, 2010
I'm migrating from Windows and obviously I miss some programs that works there, such as Nokia Pc Suite e.g. Then, I've been trying to find out a solution that works on Linux (Ubuntu).There's no this software available for another plataform. Who can help me to find out a solution for READ/SEND messages through computer connected to a Nokia phone, or a program with the same functionality of Nokia Pc Suite?
View 9 Replies
View Related
Mar 14, 2010
I used easystroke on ubuntu, and it worked well enough to be functional. I triend opening Xstroke in suse, but it just adds an icon down by the notification panel. right click and left click seem to turn it on and off, but i've yet to find any configuration menu of any kind. I've also found the 'input actions' section of the personal settings menu, but i'm having a hard time making heads or tails of it. Basically, what I need is pretty simple. I have a single application that I would like to add more control functionality through the mouse. I don't even necessarily need gesture control, in fact if i could just make my extra mouse buttons perform specific keyboard commands (F11, ctrl++, etc.) that would be fantastic. If I could set it to do different things on different programs.
View 1 Replies
View Related
Jan 12, 2011
an opensource NON-GUI git client (for linux of course) that's really light/small. I just need to it to have the main functionality of a GIT client (downloading project for read only, clone, add, commit)
View 3 Replies
View Related
Dec 11, 2009
there are already some posts out there, but it seems to be a systemic problem. i though my internal webcam (gateway usb 2.0 webcam on /dev/video0) was the problem, but now i read that logitechs have got simmilar issues.
dmesg:
[ 8.064123] Linux video capture interface: v2.00
[ 8.068361] uvcvideo: Found UVC 1.00 device Gateway USB 2.0 Webcam (04f2:b027)
lsusb:
Bus 001 Device 002: ID 04f2:b027 Chicony Electronics Co., Ltd Gateway USB 2.0 Webcam
i have got nothing in luvcview, cheese, kopete, or skype i spent hours in the internet to fix this, but whatever i did, didn't help ... has anyone got a solution yet .
View 9 Replies
View Related
Dec 28, 2010
It looks like the -t parameter is no longer available when using the shutdown command. What I'm trying to figure out is how to send all the daemons the kill signal, but wait a certain amount of time before actually halting or rebooting. I can't be the only one wanting to do this, but for all the searching I'm doing I can't find an answer.The following only warns, then waits 1 minute before sending the kill signal and immediately halting, correct? Or am I getting this completely wrong?
Code:# shutdown -h +1
View 4 Replies
View Related
May 15, 2011
I've got Squeeze with Xfce on my notebook. I don't find an option to lock the screen. How could I do this ?
View 1 Replies
View Related
Feb 14, 2011
I recently loaded Inkscape on my 11.3/kde4.6 system.I have Inkscape 0.48 loaded, had same issues with 0.47. Program functionality is fine, except for printing.When attempting output to either a laser or inkjet, the output has excessive margins and appears to be formatted for A4, not letter. The print drivers are set for US-letter.I have seen references to Inkscape using gtk-printing or gnome-printing. I do not see packages with this specific naming available via yast.The printers work fine from GIMP, OpenOffice, etc.I also have loaded Inkscape to Win32 box, open file from 11.3 box, and have similar issues, margins seem set to large offsets, but there is no place in the page setup to set margins.My solution so far has been to save to PDF, then print from Ocular, which does work, just cumbersome.
View 2 Replies
View Related
Aug 2, 2010
Is there a similar thing in expect, as there is 'read'(Read a line from standard input) in bash?I mean one could easily construct following script in bash:
Code: > cat script.sh
#!/bin/bash
read -p "Username: " uname
[code]....
View 1 Replies
View Related
Mar 18, 2011
I am a C++ programmer and never used Perl. add a functionality to a script, in Perl language. Originally, the script takes 1 file input and I run it in this way: ./script.pl file1 It is designed to return specific words from that file, example:
user
admin
printer-1
user-2
server
The idea is that I need to be able to provide the script with a second input file that contains only few words, each on a new line. These words might have a "dash". Example:
printer-2
server
user-2
I will be running the script as: ./script.pl file1 file2 In return, the script should check if every word in file1 does exist in file2. If it does exist, then the script displays it. In the example I provided above, the script should only return:
server
user-2
Here is the script I have. What's in black is the original working Perl script and what's in red is what I would like to add in Perl Language:
!/usr/bin/env perl
my ($table);
for (every value in file2)
{
[code]....
View 7 Replies
View Related
Jan 27, 2011
I had a external HD from Lacie that just made me mad because you could only log into it from a windows or mac machine. So I took the 250 HD out and through it in my P3 733Mhz Processor, 128 Ram Dell optiplex. Now My Lacie HD had a Network function on it where It had a webserver and a GUI to manage users to it. But it couldn't never get the HD to turn on for Network. It would only turn on when plugged into a USB. So I want to turn my Dell optiplex into a file server with web gui functionality. How should I start.
View 11 Replies
View Related
May 27, 2010
Is there anyway to right click on a file in the Dolphin window and select mail to: then kmail should open and the file gets mailed accordingly.
Or some way to implement this?
View 1 Replies
View Related
Jun 14, 2010
I like the sound of OpenSUSE and I'm going to give 11.2 a try. I plan to get the netboot iso and install over ftp. My only real requirement beside hardware compatibility is full cedega functionality (for lack of a better term). I'm running a 2gz AMD Athlon64 X2 3800+ and would prefer to install the amd64 version but not if it will fuck with anything.
EDIT: Hardware info
Code:
eb@comstat:~$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2[code]....
View 2 Replies
View Related
Nov 10, 2010
I continually get times where an applet on the top panel breaks, such as the Indicator Session Applet, where it doesn't show the applet, and is mimicking the clocks display, but frozen, and no functionality. This is seen in the photo, where you can clearly see the right time and applet as 5:11 and the frozen one as 4:49.
View 1 Replies
View Related