Whenever I plug in my usb flash drive or my memory card adapter they are not detected. If you can help me I will provide any kind of information needed to solve the problem, just tell me what command to run. Also my cd/dvd drive is still not being detected or is mislabeled on ubuntu 10.04 lucid lynx.
View 3 RepliesMy previous laptop died (HD failure, etc.) so I just put F15/LXDE on a Dell Latitude D610. All updates applied. I inserted my Canon Powershot A480 in a USB port, but o/s doesn't seem to react. No desktop icon, no FileManager presence, nothing in /media folder. Other USB devices are detected, mounted and recognized (external HD, memory stick, etc.), but not the camera. what I should do to get the camera recognized?
Edit: DigiKam and Digikam libs are installed and system was rebooted. Still no camera detection.
I am just getting started with Ubuntu and love it so far. It has breathed new life into an old Compaq Presario V2000 and once I get up to speed on it I hope to start running it on all the rest of our machines.
The only major problem I am having is that none of the USB devices I have plugged in are being detected. From what I have seen online I should be getting a notification and should be able to view the devices at Places/Computer but so far, nothing. Googling this problem it appears that individual devices often don't work but I could not find anything on all USB devices not working.
Any ideas as to what I am doing wrong here?
After I installed my ati grapics driver (the ati driver from the ati website) my ubuntu has this weird problem. When loading there is a line that cought my attention:
Running DKMS auto installation service for kernel 2.6.34: fglrx (8.543)...Failed
I think that has something todo with the other error I get which is:
Primary device is not PCI
(EE No devices detected)
Fatal server error
no screens found
giving up.
I have an ATI 5650 Radeon mobile grapics card By the way.
My USB devices are being detected when I run the 'lsusb' command.However there is no driver that is set to the device.Also the /dev/sdX device is created so there is a mount point
View 1 Replies View RelatedI recently had a hard drive on a computer (not to be obvious), and I fried the computer. You may ask "well why did you do that?" well, simply because I had accidentally bumped and switched to 220 volts, rather than keeping it at 115 like a sane individual. Anyway, I got a new computer, swapped the hard drive. When I go to boot into ubuntu though, it gives me the following error:
Code:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) No devices detected.
I also have XP on this hard drive, and it works almost better than it did on my old one, surprisingly. all i have to do now for it to be labeled as efficient, is to get some RAM. But anyway, what can I do about the error message? I tried booting into recovery, running dpkg from the list of options, and it did a couple of things.
Recently I installed Fedora 12 without any hassles except that the USB devices are not getting detected. I checked with /proc/interrupts and the ehci_hcd module doesn't get any interrupts. Here is my dmesg (done to show only USB related messages) :
Code:
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
[code]....
Last week, I received a used, older (built ~ 2005 or so) IBM ThinkCentre desktop (machine 8143-2EU) having a Pentium 4 (64 bit), 3.0 GHz CPU. It came with WinXP- 64 bit as the sole OS. When I tested my USB devices with the WinXP OS, they were detected and read. I wiped the WinXP and installed MEPIS 11- 64 bit. [There's only a single Intel Pentium 4, 64 bit CPU known to work for MEPIS 11- 64 bit. It's the Pentium 4 Prescott with EM64T. I don't know if my P4 is that one.] Things seem OK with my MEPIS 11- 64 bit OS except for the times when I plug in USB devices--> they're not detected nor read. In a MEPIS forum, a guy told me to try, after first plugging in the USB devices, running lsusb in Konsole. I do that, the system wakes up, and the USB devices are detected and read. But why do I have to do this to get my system to detect and read the devices? I've made the MEPIS system setting so that all USB devices are automounted when plugged in. Doing that did not correct this problem. As root, in Konsole, I ran hwinfo and noticed that for the USB controllers, the driver - uhci_hcd - is not active. Here's the hwinfo output for one of the USB controllers:
18: PCI 1d.2: 0c03 USB Controller (UHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_265a
[code]...
[I suppose or guess that all MEPIS users who don't have this USB-device-detection-and-read problem have uhci_hcd.] To see what would happen as a test, I also used a MEPIS 11- 32 bit Live DVD in this computer having the MEPIS 11- 64 bit OS. When I use the Live DVD, I have the same USB detection-and-read problem! What does that mean? With some USB devices plugged in while I'm using the Live DVD, I'm forced again to run lsusb in Konsole. This wakes up the system so that it detects and reads plugged-in USP devices. Why? Any idea on how to fix this? Does this problem seem more a software one rather than a hardware one?
I am having problems understanding how sound capable devices are being used on my Ubuntu10.10 64 bit system. I have an ASUS A8V motherboard with on-board multimedia functions provided through the VIA V8237 chip. BIOS gives me the option to disable this functionality and I have set BIOS this way. I want to use an M-Audio 24/96 card for all sound processing.
However, in applications like Audacity the VIA chip functions are all available and can be set as recording and playback devices. The same is true in ALSA.
Why does 'linux' (I have no idea which part of the OS) ignore the BIOS settings?
Furthermore alsamixer always selects the 'default' devices. Where and how are these set?
<System><Preferences><Sound> hardware tab list 2 'Internal Audio' devices but no M-Audio device. What are these devices? Only 1 of them appears to create any output with the 'Test Speakers' tab. This confuses me completely because the speakers are connected only to the M-Audio card.
None of the profiles for 'Settings for the selected device' match the capabilities of the M-Audio card (1 set of stereo inputs and 1 set of stereo outputs). So where are these profiles coming from? Which do I select for the M-Audio card?
What do the Input and Output tabs in <System><Preferences><Sound> mean? Are these different to the hardware tab? The 'Output' tab lists2 devices for sound output: 'Internal Audio Analog Stereo, Stereo' twice. What devices are these ?
I have installed Imgburn and it wont detect my cd drive, I configured wine and everything and no matter what I can't get it to recognize my driver, what am I to do?
View 9 Replies View RelatedI'm having issues getting the nvidia-current drivers working with a GeForce 8400 graphics card on Ubuntu 10.10 (x64). After running nvidia-xconfig and restarting, X fails to start with an error: No devices detected.
Here is my xorg.conf:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
[code]....
I have an issue with Hard Drives in GNU/Linux CentOS 5.3I installed linux 5.3 frash copy to new SATA MAXTOR 1000GB Hdd.And see the partitions is SATA MAXTOR 1000GB (NEW INSTALLATION CentOS 5.3)
/dev/sda1 Boot
/dev/sda3 /
(/dev/sda2 is the SWAP)
[code].....
Rhythmbox plays some music (not all of it) and it sounds crappy. And when I start Amarok I get this: KDE detected that one or more internal sound devices were removed. Do you want KDE to permanently forget about these devices? This is the list of devices KDE thinks can be removed: Output: HDA Intel (INTEL HDMI) Output: HDA Intel, INTEL HDMI (HDMI Audio Output)What to do?
View 4 Replies View RelatedI dl the windows installer one and ran it. As it started it went to the Ubuntu logo and then my screen became half full of different colored horizontal lines, so I rebooted and went into the adv boot and ran the install under safe graphics mode. Now when I boot I get options to boot into 2.6.32-25 and also a recovery and also 2.6.32.24 and a recovery. I left the 2.6.32-25 highlighted and it booted but gave me a msg that said:
(EE) VESA: Kernal modesetting driver in use, refusing to load.
(EE) No devices detected.
Then it goes to a screen that allows me to boot in a low graphics mode. It loads and I dl some security updates with the Update Manager. What do I need to do in order to boot w/o any faults and also what is the difference from 2.6.32-25 and 2.6.32-24? Which should I be using? Do I need to modify my graphis somehow?
I tried to install the latest RealTek driver for Linux and it has wiped all my devices. I've tried reinstalling the alsa-base packages but it hasn't worked
View 4 Replies View RelatedI installed lxde, but my wireless internet doesn't work. I can switch back to gnome and it works perfectly. I tried wicd and manually connecting with the command line. Both fail while trying to get an ip.
View 2 Replies View RelatedI installed Imgburn yesterday and it worked fine.Today i open it and it says "No devices detected" which doesn't let me copy anything.
View 4 Replies View RelatedBefore I changed to linux, I was on Windows 7. My computer already had 4 different partitions, and would not let me create more. And so, I had to delete one of the partitions. I chose to get rid of the "recovery" partition. I used "Macrium Reflect" to burn a bootable CD of my recovery stuff. Anyways, fast forward to this morning. I got tired of the KDE desktop, and I decided to switch to Gnome. So, I went into windows 7, deleted the three OpenSUSE partitions, and moved the remaining space back to my C: (windows) drive. (don't ask me why :S)
Anyways, so I take a look, after it's done deleting/moving stuff, and I'm told that "no bootable devices detected".. This made me angry, as I am certain I didn't delete any of the windows partitions. So, I thought, I'll just use my recovery disk, because I quite literally, have no personal data on my computer to lose.Except, my recovery disk is not actually bootable. So, then, after screaming in rage, I booted up OpenSUSE from my KDE CD, and was gonna take a look at things in YaST. Except, YaST will not actually open.
Is Fedora LXDE Spin is any different then the LXDE installed the repositories>?
View 3 Replies View RelatedI installed LXDE and want to choose each boot whether to run Gnome or LXDE. However Gnome gets started automatically without me being able to choose. Are there any config files I have to edit?
View 1 Replies View RelatedLubuntu is nice - but it seems the LXDE version is not as up to date as Fedora LXDE Spin or even Debian squeeze with LXDE installed. I do like Chromium on Lubuntu though... its faster and a nice touch. I am looking for a lightweight 64-bit distribution for my main laptop (it is by no means "old" or "low spec" but I like that Lubuntu starts up in like 2 secs).
LXDE version seems not to be recent (esp in 10.04 version which seems to work more stably for me - with Nvidia drivers etc)64 bit install is currently a pain - requires first install of minimal CD or alternate CD both of which required wired Ethernet, then install of lubuntu from PPA. Native 64-bit support would be nice. Linux Mint LXDE, for example, is also only 32-bit.
I'm working on a server and noticed that the to RAID5 setup is showing 4 Raid devices but only 3 Total devices. It's on a fully updated CentOS 5 system that only has three SATA drives, as it can not hold anymore. I've done some researching but am unable to remove the fourth device, which is listed as removed. The full output of `mdadm -D /dev/md2` can be see below. I've never run into this situation before.Anyone have any pointers on how I can reduced the Raid Devices from 4 to 3? I have tried
mdadm /dev/md2 -r failed
mdadm /dev/md2 -r detached
but neither work and since there is no block device listed I'm not quite sure how to get things back in sync so it's only seeing the three drives.
/dev/md2:
Version : 0.90
Creation Time : Tue May 25 11:07:04 2010
Raid Level : raid5
[code]....
How to remove LXDE from ubuntu 10.10? i've followed the instructions in [URL] to uninstall it, but it's also uninstall several application that i need.
View 3 Replies View RelatedIs there a way to add lxterminal to the LXDE task bar?I noticed that it was not listed as a selection under Add/Remove Panel Items and when clicking Add, the "plugins" listed do not include this.I previously used LXDE with Mandriva and their implementation included it on the Task Bar.
View 4 Replies View RelatedI installed the maverick server, and tightvncserver. I wanted a light desktop environment so I installed lxde. I am running this on a KVM virtual machine.. I want the KVM console to fall to text as the default ubuntu-server does, however after installing lxde it seems to start lxdm from somewhere... It is disabled in the rc.*/* setup...
Code:
root@srv:/etc# ls -ld rc.*/*lx* init.d/*lx*
ls: cannot access rc.*/*lx*: No such file or directory
[code]....
By default, it displays the LXDE CPU Usage Monitor at the bottom. Does this monitor actually use CPU resources itself, and if so, would it be recommended to remove it from the panel on a slower system?
This is on an AMD K6-2 system (500 MHz) with 640Mb of PC-100 memory (circa 2001). By itself, the system is better than average when using LXDE, but I have noticed that when the system is checking for updates or when it is printing something, the usage monitor essentially displays 100% CPU usage until the updater or printer finishes, as the case may be. It will also indicate 100% usage when the web browser is loading in a web page.
I'm currently using the Lubuntu 10.10 LiveCD and all seems well so I may well install it. As I am a big fan of fluxbox I was wondering if this could be installed as a secondary desktop manager should I want to use it as an alternative to lxde?
View 2 Replies View RelatedLubuntu comes default with Aqualung - which I'm certainly happy with. Unfortunately it doesn't yet support Last.fm, so I'm auditioning new players. The first (and only - so far) that I've installed is Decibel. I quite like the look of it so far. It has the features I need without the bloat. Unfortunately I can't get it to work. When I select a track or tracks from the CD drive (yes - I still listen to CD's ) the track shows up in the playlist and the disc spins in the drive for a second or two, but I get nothing. Just a red X next to the track in the playlist. And tracks on my hard drive don't even show up in the explorer module. And no info is retrieved from cddb (I do have that option selected).
From what I've read Decibel is geared toward GNOME users, and based on Python. Python appears to be installed by default in Lubuntu, so I'm going to assume that Lubuntu lacks something else that GNOME has which will allow this thing to operate. But I have no idea what that might be.Has anyone managed to use Decibel on LXDE?
Is there any way of using keyboard only in lxde?
Lxde wiki does not seem to be working so am struggling to find keyboard shortcuts.
Need to find keys that will let me use number pad to move mouse.
Or even access main menu
I was wondering is there a way to install the lxde desktop and have the option to boot to Ubuntu 11.04 or the lxe desktop.I have googled but haven't found any info on this.
View 2 Replies View Related