In the past I was informed that I should be using X86 64 bit for my system. On looking into updating to 10.10 I only found the AMD 64 offering. Has the X86 64 bit been dropped and if so will the 64 bit offering be suitable for my use?
View 9 Replies
Downloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
View 2 Replies View RelatedHow do I replace a 32bit version of 11.1 with a 64bit version of 11.2 or is it even possible?
View 2 Replies View RelatedI have Ubuntu 10.04 32Bit installed. Is i possible to upgrade to Ubuntu 64Bit without a clean install?
If not, what is the best way to back up configurations and installed packages in order to do a clean install and upgrade to 64bit?
But is not "recommended for daily desktop usage"? Is it not stable? Should I just stay with the 32 bit version?
View 8 Replies View RelatedI have a regular Dell D520 with 32bit 10.04, and wondered if it's possible to start using the 64bit version of 10.10. Do I need any special architecture to run 64bit? Is there any advantage in a regular laptop running 64bit?
View 8 Replies View RelatedI have Ubuntu 10.04 LTS installed...how can I find out if I have 32bit or 64bit version?
Also, can someone briefly explain why there is this importance about "do you have 32bit or 64bit"?! ie. what does it mean?!
I was wondering if there is a 64 bit version of OpenOffice?
View 3 Replies View RelatedAnyone managed to install Ubuntu 10.04 on a box with Intel Core i7 920@2.67Ghz processor. I downloaded ubuntu-10.04-desktop-amd64.iso & ubuntu-10.04-alternate-amd64.iso ran md5sum's, burnt them to DVDs & CDs but couldn't manage to install the 64-bit version. For some reason the installations abort. I've got Ubuntu 9.10 32-bit version running on the box right now.
View 3 Replies View Relatedmy lappy is 64bit...But I dont remember, So far I am using 32bit ubuntu. So How can I know if my computer is 64bit machine? if it is, Installing ubuntu 9.10 64bit will give any performance fetch??I guess 64bit ubuntu and 32bit are same interms of functionality and look Right? may be performance difference? give me some info...
View 5 Replies View RelatedI demo'd 9.10 32 bit and got my wlan woking using ndiswrapper. Then, I decided to install the 64 bit version and I cannot get my driver to work. Can't find a 64 bit driver for my D-link DWA-130 USB adapter. What is the easiest way to uninstall 9.10 so I can install the 32 bit version? Is it as simple as reformatting the ubuntu partition?
View 2 Replies View Related10.10 64 bit clean install. If you download software via Software Centre, terminal or Synaptic will you automatically download, if it exists, the 64bit version?
View 2 Replies View RelatedHave been using Lubuntu Natty (32-bit) happily for a few days now, even generated a remastered iso (urxvt, custom .bashrc, .bash_aliases, Chromium with AdBlock Plus, Tabs to the Front, Context Menu Search, Unified Openbox and GTK themes, aria2c, htop). One of the Peppermint OS developers put together a 64-bit version of Lubuntu Natty. Downloaded and installed it from USB (using USB Creator) today. Hangs pretty bad at LXDM login screen.
View 1 Replies View RelatedI have just dual booted my pc to run windows 7(64 bit) and ubuntu 9.10 (64 bit). This is my FIRST time using ubunutu and i have spent the whole day trying to get my internet working but with no success. I have come so close to giving up on ubuntu but for some reason i just cant let go! When i type in ifconfig in the terminal i can see that i have an ip address assigned and i can ping my router. My motherboard came with linux drivers and i tried installing the LAN drivers with the included instructions i have got no where. I did find out that the file name in the instructions was wrong and the actual name is r8168-8.012.00. Here are the instructions-
[code]...
i cant find a link to download a 64bit version from and im wondering would it run java ok?
View 9 Replies View RelatedDoes anyone know where I can get, or have available for download, a 64-bit version of the Knoppix distro?
View 4 Replies View RelatedSo I decided to try something new and fresh. I wanted to try ubuntu. So I download the 64bit version from here. I made a 25GB partition. I then Wubi found out I didn't need the original file since it was downloading something else. I installed it, rebooted.
Windows comes up with a prompt:
Boot from:
Windows 7
Ubuntu
I click on Ubuntu. This comes up: [URL]. I am fairly new and I don't know what to do. I did research and nothing really showed. I then burned the said 64bit version and tried to do a Live CD but it didn't reboot into ubuntu. I really want to try ubuntu? I am going to re-install again.
does a version for kubuntu 11.04 64bit for a intel processor exists.
When I download the 64 Bit Version of kubuntu.org, the filename is named with "amd" at the end, but I need a version for intel bit64 (icore7).
I have Fedora 11 installed on two different machines, one 32 bit and the other 64 bit. If I play an mp3 file in the 64 bit system---it doesn't seem to matter which player I use---then I can only start, stop, or go to the beginning or end of the selection. I can't advance the stream to some intermediate point. The slider display showing the position is greyed out. The same programs on the same file in the 32 bit system work normally and allow me to advance the position by using the mouse with the slider. This may have something to do with how gnome is configured on the two machines, but I can't figure out what is different.
View 1 Replies View RelatedI have a 64 bit version of fedora 13. I've been trying to install adobe flash and I've tried a couple of different guides and none of them worked for me can anyone give me better instructions?
View 14 Replies View Related Im trying to install iseriesaccess for linux. I've had to use the i386 version and the 64bit says it has not 5250 emulator which is the reason im installing it. I have had a good look and cant get it to solve these dependencies. Has anyone else tried and got this working?
[ltodd2@zeus Downloads]$ rpm -ivh iSeriesAccess-5.4.0-1.6.i386.rpm
error: Failed dependencies:
libodbcinst.so.1 is needed by iSeriesAccess-5.4.0-1.6.i386
libodbc.so.1 is needed by iSeriesAccess-5.4.0-1.6.i386
libstdc++.so.5 is needed by iSeriesAccess-5.4.0-1.6.i386
[Code]...
just did a fresh install of opensuse 11.3 with kde 4.5. Fully upgraded everything and then added the packman repo. Everything else is stock. But I found when trying to install libxine1-codecs that theres only a 32 bit version and no 64 bit support. This seems different than my past experience.
View 4 Replies View RelatedI have several server (mailserver, webserver and lot of fileserver) all are 32 bit slackware and I am satisfied! My company plan to upgrade our server and buy a 64 bit server maybe amd x3 or opteron? Is slackware 64 bit will help boost my server performance? Or will I stick to 32 bit for now?
View 7 Replies View Relatedsince lamaresh is not being updated anymore and the wine packages from the official Debian repository are quite old there isn't really much choice for getting a recent version of wine anymore. Since I don't want to use the carbon project or the Mempis repository, as stated here, (at least yet) I have decided to build the package myself. Unfortunately I would like to have a 32bit version but am running a 64bit version of Debian Squeeze. When I run ./configure I get the following message at the end.
[Code]...
Today was an update for the xine-lib-extras-freeworld, version 1.1.16.3. My current version is 1.1.16.2 Kpackagekit and Yum both give an error message when trying to update:
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package xine-lib-extras-freeworld.x86_64 0:1.1.16.3-1.fc10 set to be updated
--> Processing Dependency: xine-lib(plugin-abi)(x86-64) = 1.26 for package: xine-lib-extras-freeworld
--> Finished Dependency Resolution
[Code]...
I have been using for over a year now, my 64-bit computer first with Fedora 8 and now with Fedora 10 with 2Gb of RAM just fine. Today I purchased an extra 2Gb for the system and upon installation from the GRUB screen Fedora 10 simply won't boot. It does boot with 3Gb, and it doesn't matter which stick I use for the 3Gb configuration, or what slot do I put the sticks into the motherboard, however if I place the four sticks, F10 simply won't boot. Should I pass a command line argument tot he kernel? If so, which?
View 11 Replies View RelatedWhat is the best way for installing Firefox and Sun JDK 32 bits alongside my 64 bits version?
View 2 Replies View RelatedThis is a 64 bit machine
[root@intergate2 log]# rpm -q perl --qf '%{NAME} %{VERSION} %{ARCH}'
perl 5.8.8 x86_64
[root@intergate2 log]# yum install perl
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: mirror.stanford.edu
* base: mirror.hmc.edu
* extras: mirror.raystedman.net
* updates: centos.eecs.wsu.edu
Setting up Install Process
Resolving Dependencies
---> Running transaction check
---> Package perl.i386 4:5.8.8-18.el5_3.1 set to be updated
---> Package perl.x86_64 4:5.8.8-27.el5 set to be updated .....
Transaction Summary
Install 1 Package(s)
Update 1 Package(s)
Remove 0 Package(s)
If I boot from the opensuse 64bit DVD (Ver.11.0/11.1/11.2 - its the same effect)-the bootmenu appears-i choose to install opensuse in the menu-now the kernel is loading-then i see shortly the next screen-and then my notebook reboot.I have the effect also in the live-version 64bit.The 32bit version works properly.i haven't any problems with vista 64bit or Ubuntu/Kubuntu 64bit, but the same effect with mandriva 2010.0 64bit.
View 9 Replies View RelatedI am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View Related
