Ubuntu :: Installing Printer Drivers On Multiple Computers?
Dec 5, 2010
I'm a very inexperienced Linux user, just getting started, so bear with me. I was able install the printer drivers for a Brother network laser printer (HL-5370DW) and would like to install the drivers on a few other computers on my small home network. Is there a way to automate this process by pushing them out to the other computers, or should I just manually install them? It wasn't difficult, just wondering if there is a slick way to do this.
View 2 Replies
ADVERTISEMENT
Mar 12, 2010
I'm reasonably new to Linux and very new to Ubuntu . I've just installed 9.10 as a dual boot on a Windows XP Pro Dell Inspiron 9200. I have a Samsung CLP-315 that I need to configure first as a local printer then as a wireless network printer. I found the software (.bin file) on the Samsung site and downloaded it but that's as far as I got. Can I use any of the GUI package managers or do I need to use Terminal and command line syntax? Here's the real question "what is the syntax for installing software/drivers?"
View 3 Replies
View Related
Mar 11, 2011
I have a Xerox printer, Phaser 3160. On the cd that comes with the printer i got a file for linux called "P3160.tar.gz".
Having extracted this file I found the content as listed below:
These are the files in the linux dir,nothing in the other dirs
Below are dirs
As there is no ./configure file, what do i have to do to install the drivers for the printer
I am using Suse 11.3
View 1 Replies
View Related
Aug 4, 2015
My purpose is to be able to use Canon printers with my debian jessie system (installed via netinst iso).
I have read this wiki page but unfortunately it is a little old. I still have followed/adapted the instructions there but it fails on my system on step 6. I will explain below.
Latest Canon drivers in the official website is v3.10. US version of it can be obtained from here.
When I try to install .deb package in the driver file archive I get following output:
Code: Select allsudo dpkg -i cndrvcups-ufr2-us_3.00-1_amd64.deb
[sudo] password for ert:
Selecting previously unselected package cndrvcups-ufr2-us.
(Reading database ... 155527 files and directories currently installed.)
Preparing to unpack cndrvcups-ufr2-us_3.00-1_amd64.deb ...
Unpacking cndrvcups-ufr2-us (3.00-1) ...
[Code] ....
And the next thing I tried:
Code: Select allsudo apt-get install cndrvcups-common
[sudo] password for ert:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package cndrvcups-common is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source. However the following packages replace it:
cndrvcups-ufr2-uk cndrvcups-ufr2-us
E: Package 'cndrvcups-common' has no installation candidate
I cannot solve this package error.
View 2 Replies
View Related
Jan 11, 2010
I have a Compaq Presario CQ60 laptop with an Nvidia 8200M graphics card. When I try to enable visual effects I am asked to install the Nvidia restricted driver. When I do this and reboot, I get 6 copies of the Ubuntu screen on my display. Does anyone know what is causing this? I'm not sure which version it installed, I assume either 173 or 185. I have downloaded version 190 from the Nvidia web site. Should I install that version? If so, it is a .run file, how do I install it?Also, how do I reinstall the old driver. I fixed the problem this time by reinstalling Ubuntu, but that will get old if I have to do it too often.
View 4 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Jul 6, 2010
Ubuntu 10.04 and have a problem with loading the Linux printer drivers for my new Lexmark printer. When I try to load up the printer driver downloaded from the Lexmark site I am asked to enter a root administrator password, but when I enter the password I used to setup the OS it will not accept it. I have reviewed the "sudo" terminal password info, but as I am a newbie I was concerned about wrecking the installation.
View 4 Replies
View Related
Oct 19, 2010
I am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
View 3 Replies
View Related
Sep 12, 2010
I have recently obtained a dell 725 printer but it the drivers do not seem to be available when I try to configure it.
View 3 Replies
View Related
May 29, 2010
I have installed Ubuntu 10.4 LTS and I want to share a printer on that computer with my windows network (mix of XP and Vista). I have network connectivity and and can see other windows computers and they can see me, I am just stumped on how to share a printer on my linux machine with all of the Windows computers on my network.
View 4 Replies
View Related
Dec 30, 2010
In Ubuntu 10.10, I have my printer, an Epson D120, shared. I can print from the computer itself, but other computers cannot print to it. Both Ubuntu and Windows machines have the printer successfully installed. They can access it, I can access CUPS from all these machines and the the job queue even reports the jobs sent from these computers. But the page count is unknown and nothing is printed, although it says the job is completed.
I'm quite desperate to get this to work. It would suck if I need to go back to Windows just because some minor thing goes wrong. I really don't understand why local prints are OK, but prints from the network are not working.
View 2 Replies
View Related
Oct 12, 2010
I got my desktop all set up the way I like it, and it took a lot of tweaking and I can't even remember where I set all of the settings.
Is there a hidden file (or folder) or something like that in my home folder I can copy over to another Ubuntu machine to duplicate it?
I'm looking at settings like theme, colors, menu transparecies, etc.
View 1 Replies
View Related
May 27, 2010
I recently purchased a wireless USB dongle. It works great. I am looking to connect multiple computers to that USB dongle. I wanted to know if anyone out there knows if it is possible to link multiple USB cables together like a reverse splitter.
View 7 Replies
View Related
Dec 28, 2010
I have a very old machine running Linux (Fedora 12) with 2 harddrives and a DVD RW. I also have a newer Dell computer running XP. I would like to take the 2 harddrives and DVD RW from the older machine and put them into the available slots in the Dell computer and configure it for dual booting.
View 2 Replies
View Related
Dec 29, 2010
I am setting up my home network. Currently, I have one computer (Munchen) which I have set in my router to receive SSH requests. This works just fine; I can SSH into that box from anywhere. I just put together a new computer, which I want to be a file repository, my ftp server, my http server, etc. What I would like is to be able to SSH into that machine from anywhere, then SSH into the other computers on that network from there.
Here is where I really don't understand the concept of what is going on. I can SSH past the router into one computer just fine either from anywhere (that makes sense to me). I can SSH from my new computer (Chemnitz) into Munchen (which is where the router points to and is running sshd) by using its local IP address, but I can't go from Munchen to Chemnitz (even though the server is running and the firewall should be allowing the connection). [URL]
Details of the system setup are below.
Munchen (receives all port 22 requests now)
Ubuntu 10.04
Chemnitz (I want to receive all port 22 requests and SSH into other computers on the network from it. Ultimately it will be a file sharing box, hosting a webpage, running an ftp server, etc.)
Fedora 14
View 8 Replies
View Related
Oct 1, 2010
I'm trying to write a mass reboot script in the event of a power outage (servers go to UPS for some 15 minutes or so and shutdown uncleanly). What I have is a set of 6 common passwords which will be prompted for per ssh connection, is there any way I can cycle through this password list
Code:
#below is an example of how this is constructed, IP's are used instead of hostnames due to the possibility of a DNS server being offline.
SERVERSRM1="1 2 3"
SERVERSRM2="110 120 130"
For i in $SERVERSRM1; do ssh -n root@192.168.0.$i "hostname && shutdown -y -i5 -g0"; done;'
for i in $SERVERSRM2; do ssh -n root@192.168.0.$i "hostname && shutdown -y -i5 -g0"; done;'
Each time the code is executed I'm prompted for a password (it's always one of 6 passwords). It would be quicker to have the passwords be cycled through.
I realise this is basic code at the moment but it will eventually allow for a specific set of computers to be shut down based on what power supply they're using. Authorized keys not really an option given the scale of computers (some 300 or so).
View 10 Replies
View Related
Dec 5, 2010
I will cut to the chase. I am running three ubuntu computers on my local network:my desktop which runs ethernet, and two laptops which run wireless on the same network, and all from the same router. For purpose of this thread, I am concentrating on this one issue with pulse(assuming its pulse doing this). When I have two computers running at the same time, or even all three, I can hear bursts of sound coming from the other computer, not all the time, but consistently. I don't know what is causing this. I've searched hi and low in all ubuntu pulse audio forums and those mentioning pulseaudio and I have not seen this issue posted anywhere. Most threads deal with issues of not being able to get pulse to recognise audio from one computer to the other...mine is just the opposite...I'M TRYING TO STOP THIS FROM HAPPENING!...... If I'm listening to my music on my desktop, I don't want to hear what my son is playing on his laptop...and vice versa. all the computers at my home are running lucid lynx, latest updates and latest approved kernel as of the date of this post. 2.6.32-26-generic.
View 2 Replies
View Related
Jan 15, 2011
This may sound stupid but I've got to ask. Can I connect multiple computers running Ubuntu & run software from one computer from the other? I know how to connect using SSH & to copy files back & forth but I don't know how or if I can share programs.
View 7 Replies
View Related
Mar 18, 2010
Ever need to provide access to multiple PC's and did not have a router only a hub. Maybe this isn't original thinking, but then again maybe you didn't think of doing it this way (which i am sure there are many ways to do it) So I have 2 Ubuntu Servers, 1 Windows Box and a Hub - All 3 with internet access off of single ip and single Ethernet port.
While searching for a backup method today I came across Clonezilla. I was wondering if this was the right thing for me and since I needed to backup my roommates PC for a reformat and install of Windows I decided I would give it a try, but only if it would work. I didn't want the hassle of going into the main part of the house and finding out what cord was what as there is a cable modem connected into a switch (4 static IP's with internet) and one port of the switch hooked to a router) Anyways, didn't work he was on the router I was on the switch)
But this got me thinking. When I setup my server to do this, during one of the setup scripts it said it was setting up Internet access for client machines and that it was assigning them IP addresses threw a DHCP server that it had installed.
So, I dug up the hub connected the internet cable to hub up link and Server 1 on port 1 Server 2 on port 2 and Windows on port 3 The main server gets the internet provided IP address and routes it to the hub via a virtual interface. Server 2 is configured for DHCP and the windows box, It was set to get info automatically but it didn't fill the DNS info so I had to manually do that (just a heads up) I decided to use OpenDNS Servers (208.67.222.222 & 208.67.220.220) but im sure putting in the gateway IP address would have worked too.
So, by now if you need this I am sure you are excited and want to get to it. Like i said there are probably other ways of doing it, ways that don't involve you installing clonezilla and DRBL, maybe even just DRBL is needed, maybe one of them installed whats needed as a dependency- all I know is it works, if you know - elaborate so people know, but hey- this way not only do you have internet access on all PC's you can deploy custom images to them as well.
View 1 Replies
View Related
Mar 25, 2010
initializing a branch in one Launchpad project on multiple computers, or even upon reinstalling an OS? I know I sure haven't.
View 1 Replies
View Related
Feb 3, 2010
I'm looking to setup a home server for the purpose of backing up and storing the files on our multiple (Windows) computers. What kind of server should I set up? Samba? Lamp?
View 5 Replies
View Related
Mar 30, 2010
install ubuntu linux on a usb HDD and take it every where with me and use it on so many computers ?
View 5 Replies
View Related
Feb 6, 2011
I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
View 2 Replies
View Related
Feb 1, 2010
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies
View Related
Aug 14, 2010
This site has drivers for my new Brother HL-3040CN laser printer ... but it says its the wrong architecture when I try to open the first one with GDebi Package Installer. I'm kind of stuck now ...should I try just plugging the printer into the computer with the network cable and seeing if Ubuntu will automatically take care of drivers? For reference I saw this topic when I googled the issue [URL] This site says 64 bit drivers are available for Ubuntu 9.10, only 32 bit drivers are available for Ubuntu 10.04. I am running 10.04 (64bit) ... should I return the printer?
View 6 Replies
View Related
Oct 17, 2010
Is there some program out for linux that is similar to ndiswrapper, in the sense that it can use Windows drivers for printers? As of right now, printing has been one of those issues I've had in linux for years, but I was lucky enough to have a supported printer. On other machines, including family members, they are not so lucky enough to have a supported printer.
View 2 Replies
View Related
Jan 8, 2011
I am at a university where my bandwidth is severely capped. I can start several other computers near me and download at the limited speed simultaneously. Is there any way for me to share the download between the computers to get the cumulative speed?
View 1 Replies
View Related
Nov 1, 2010
I use Ubuntu Server 10.04 and would like to share my printer from it. I have a Canon Pixia MP270 and I can download the source drivers from URL...There is also a deb file driver download tested on ubuntu 9.04 but I fails to install.Im not worried about the scanner option on the printer I just want to be able to share the printer to my Windows 7 PC.
How do I install the source drivers?I presume once its installed I can share the printer through webmin and install it on my Windows 7 machine?
View 2 Replies
View Related
Nov 5, 2010
I bought an Epson workforce 520 printer and I need to install the drivers to make it work on Maverick Meerkat. where to get the drivers and how to install them.
View 9 Replies
View Related
Jul 10, 2010
hplip-3.10.5.run is the name of the file.
View 6 Replies
View Related
