what should be my menu.lst entry to the 3rd drive intended for fedora to boot. for now this is what i did but didn't work.
# Other bootable partition config begins
title Fedora (on /dev/sda3)
rootnoverify (hd0,2)
kernel (hd0,2) vmlinuz PMEDIA=idehd
initrd (hd0,2) initrd.gz
# Other bootable partition config ends
i just installed ubuntu 9.10 netbook remix, i made a partition (sda6) for it, first i had only opensuse, and when i was installing ubuntu, i put the bootloader in (sda6) the Opensuse bootloader is installed on MBR,
[code]...
i just installed ubuntu 9.10 netbook remix, i made a partition (sda6) for it, first i had only opensuse, and when i was installing ubuntu, i put the bootloader in (sda6) the Opensuse bootloader is installed on MBR,
Code:
fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb02fb02f
[Code]...
I am running ubuntu 10.4 only .
I assume to make the boot menu appear I have to add an entry into 40_custom file. Not quiet sure how to make that entry, or if it has to be positioned a certain way.
There are times that I would like to open an app as root user without having to use the command line in order to do that. I learned of a nice app in the Fedora repos called beesu and I will show you how to set up a menu entry to be able to use this nice app.
From man beesu:
Code:
See man beesu for more information.
Beesu can be installed in Fedora with the following command:
Code:
IMPORTANT: Beesu must be installed in order to successfully complete this tutorial.
You can use beesu from the command line with the following example:
Code:
This will open gedit as root user after the correct root password has been entered into the password prompt. This is great. However, I'd like to open an app as root user without having to use the command line or alt+f2 run box. So, I wrote a small bash script that uses zenity to prompt the user for an app to open as well as the root password.
Copy the following code into a new text file and name it mybeesu.sh.
Code:
You need to change the /path/to bit in step 4 "Command" to reflect the path to which you saved the mybeesu.sh script. Click the OK button to save the new menu item.
Now, when you click the new menu item from the gnome menu, a zenity window will open asking which app you want to open. After that, a second window will open prompting you for the root password. If all goes well, and you entered the correct root password, your desired app should open as if you used su -c 'foo' to launch it.
I'm using Fedora 12 with Gnome and I have a slight problem with my places menu. I have entries in the list that I would like to remove, but cannot figure out how. I multiboot Fedora with Windows 7 and windows 98. My Places menus looks something like this:
Places
Code:
Home Folder
Desktop
Music .....
Now, if you notice there are 2 entries for both my 'Storage' and 'Windows 98' partitions. On of them will actually open up a window showing the contents of the partition, the other displays an error which basically says "Unable to mount, drive is already mounted". Right clicking on the entry has the same effect as left clicking, it just brings up the error message. They do not appear in the Bookmarks menu.
If i select Places -> Home Folder vlc starts and try to open the content of the selected folder.
Any idea which config file i should adjust to solve this behaviour?
I currently have a Slackware system an am using Lilo. I just installed Fedora 13 on a different root partition to play around with, I chose not to install Grub. How can I add an entry to Lilo to boot Fedora? Almost everything I am reading online says to use Grub and not Lilo, is there a reason for this?
View 12 Replies View RelatedI'm going to try and install fglrx again, however last time it killed my system, giving me a 'display not detected' error on my monitor with no way to reach a non-grapgical tty to edit xorg.conf.Is it possible to create a custom grub entry that will boot Fedora 15 with the Radeon drivers in case fglrx once again trashes my system?
View 2 Replies View RelatedI have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies View RelatedI successfully installed Fedora 11 from the DVD iso. At the end, the installation program prompts me to reboot the system. But when the boot loader appears after rebooting, there are only the old entries.
I have 2 IDE disks and one sata disk. The first IDE disk is hd0, the second IDE is hd1. The SATA disk is hd2. In the setup, I selected hd0 to install grub. Fedora 11 was installed on the SATA disk (hd2).[edit] I forgot to say, that Fedora 10 is on /dev/sda and Fedora 9 on /dev/sdb
Update Mgr got me a bunch of updates today, including a kernel (2.6.31-20). I was doing something else, and when it prompted me to do something with menu.lst, I accidentally accepted the default, which I think was to keep menu.lst unchanged.
As a result, the new kernel was installed but not added to menu.lst, so I guess I can't boot to it.
Is there a way to tell my computer, "make the entries into menu.lst automatically"
I guess I could put the entries in manually, but as a beginner, I'm pretty scared to be messing with that file...perhaps if someone has a link to an exceptionally understandable explanation...
I'm trying to add an entry to the gnome menu for every users of a FEDORA 14 system, both
Code:
xdg-desktop-menu install --novendor --mode system osean-programmer.desktop
and
Code:
desktop-file-install osean-programmer.deskto
[Code]....
How to add the application launcher to every user's Desktop during the RPM installation?
I compiled QLWM window manager but it's not in GDM's session menu. How do i add it there?
View 1 Replies View RelatedI have openSUSE 11.4 KDE (64-bit). Very inexperienced Linux user. I just dragged Thunderbird's icon to the lower panel so that it can be launched quickly. But now when I go to Application Launcher -> Applications -> Internet -> E-mail, the Thunderbird entry is no longer visible.How do I bring it back?
View 3 Replies View RelatedI just finished an install with 4 OS's. DOS, XP, WIN7, and UBUNTU. They work fine no with problems. However, the menu entry to run memtest does not work, However on my other system it works. The failing system is an i7 and the working one is a Core Duo. Both have a lot of ram. The Ubuntu os was copied with GPARTED. So it is identical.The menu.lst was a copy/paste job and then the HDxx's modified as needed. Please take a look and tell me where I went wrong.menulst.txt
View 4 Replies View RelatedI uninstalled OpenOffice using Software Center and installed LibreOffice from the PPA using the instructions on this page:[url]
I can't find any way to launch it. Applications > Office used to have OpenOffice Writer in it. Now there are no menu items for LibreOffice any darn place.
I installed(actually i hope i did) CentOS 5.5.However i can see my HDD in Hard drive menu in bios but HDD doesn't shows in boot menu.
View 10 Replies View RelatedI recently upgraded grub -> grub2 on my karmic box. Grub2 worked when chainloaded from legacy grub, and also the first time I tried it standalone. Both times the grub2 menu came up.
I ran vbeinfo at a grub2 command prompt, and found my monitor's native res listed - 1280x1024. I added that to my /etc/defaults/grub and then ran update-grub, and rebooted. This time no menu appeared and the default entry booted straight away. I suspected that the resolution was not supported for some reason or that the way I entered it in the config file was wrong, so I commented it out again in /etc/default/grub, and ran update-grub again - to no avail.
I have since tried lots of different formats for the GRUB_GFXMODE, such as 1280x1024@24, 1280x1024x24, and the normal 640x480, but none of them give me a grub menu. I have even tried using GRUB_TERMINAL=console, to no avail. I have checked the /boot/grub/grub.cfg file each time to make sure my changes were put there correctly by update-grub. I have also made sure that timeout was set to 10, and the hidden timeout was set to 0. My GRUB_CMDLINE_LINUX_DEFAULT="quiet".
I have reinstalled grub2, grub-pc, and grub-common, and I have dpkg-reconfigured them all too. I have no idea what to do to get my grub menu showing up again.
I've just installed FreeBSD 8.1 on /dev/sda4 (FreeBSD slice), without installing the boot loader from FreeBSD (I've selected None when prompted for boot loader in sysinstall). Now I want to use my existing Grub2 from already installed Ubuntu 10.10 to boot FreeBSD also.
After some reading, I've added to the end of /etc/grub.d/40_custom:
After running sudo update-grub, grup.cfg file shows my new entry. The problem is that after restart, I don't see the new entry in the grub menu.
Another question, If i used chainloader +1, that means I need to have the FreeBSD bootloader installed also on /dev/sda4 right? For chainloading booloaders?
I didn't get to that step, I first want to see the entry in the menu.
Any idea what I might be missing/misdoing? (I also checked for blank spaces in the menuentry like the wiki for grub2 says)
Having just upgraded to Ubuntu 11.04 from 10.10 I noticed that my Grub menu had not upgraded. The upgrade was not as straight forward as it should have been as the PC hung at the end of the installation resulting in a reboot and running dpkg in safe mode to get it all back up and running.
To fix the incorrect grub menu.lst file which was not updating, I renamed the original file and then ran sudo update-grub. It generated a new and correct file. However, my Windows partition was not listed as a Grub menu option.
[Code]...
How can I add a menu entry when I right click my mouse system wide?
View 2 Replies View RelatedOk, first is it possible to take a program I wrote and make it to be a entry in the right menu of a file browser program.
Also, can this happen if the program is developed in Java?
OpenSuSE 11.4
Kde 4
Dolphin(file browser)
I have just installed KDE3.5.10 on S13.1 and have followed all steps required on the site at 'http://slackware.osuosl.org/unsupported/kde-3.5.10-for-slack13.0/' containing the packages, finishing with:
[code]...
You'll probably need to log out and back in again for the profile scripts to add the KDE3 stuff to your $PATH and $XDG_CONFIG_DIRS. When you log back in, KDE3 should start when you run X. Unlike LXDE, this install didn't automatically create a menu entry for gdm. Everything seems to be right, but I can't get the gdm entries I've tried to work. Could somebody who has also installed 3.5.10 kindly post the correct file contents?
I've recently installed suse x64 kde in dual boot mode with windows. I have 2 primary partitions with ntfs with 1 for windows7 boot and other for data/storage. There is no boot provision for data partition. SUSE install is on extended partition. I am unable to run fdisk -l and boot info script for some reason, kde is freaking me out (used to use gnome for last 4 years). The GRUB shows data as a boot and it added an entry in its menu. I will like to remove that entry from menu list.
View 9 Replies View RelatedI have manually added an entry for Ubuntu in my grub menu, using Yast. But every time the kernel is updated, this entry disappears. On the other hand, the one for Windows, that was added during OpenSuse's installation, is still there. So how can I keep this entry for Ubuntu ?
Edit : when I save the menu configuration in Yast, I get the following message :
Code:
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kbuildsycoca4 running...
[Code]...
How do you find out which USB device in lsusb maps to what /dev entry? How do you find out which /dev entry maps to what /device entry? What about drives with multiple partitions?
View 8 Replies View RelatedI want to install ubuntu 9.10 into other partition, but I want the win xp boot.ini file to configure my boot settings, not the GRUB. First I want to ask is it possible to install ubuntu, but add a boot entry in boot.ini? If not, then I know how to remove it, i found a file called ms-sys, with it I can remove GRUB. So let's say grub is no more, what should be an entry to ubuntu. When it was installed into Windows it was
Code:
c:wubildr
now what should I enter, my guess would be
Code:
m:ootgrubmenu.lst
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies View RelatedWe had a perfectly working SUSE OES netware server for some months, and wanted to create a new image backup. Using Acronis Backup and Recovery Advanced Server Software. This worked a treat on our SBS 2008 Server. We went to run it for Novell OES and a system lock up occurred and services such as Iprint then disabled. A server restart recovered the server after a few attempts. We then learnt that the server could not write files to an NTFS formatted USB drive. This was the ideal destination to test the backup. However we could not even write a simple file to the drive without an error message about permissions.
We then learnt that Linux needs a package called NTFS-3G to enable NTFS writing permissions. This did fix the writing issues. We attempted to run another back up which again failed, bringing down the server. We again attempted to reboot the server this time we fail to get to the graphical user login. At the suse Linux Enterprise boot screen we select "boot from hard disc". Which fails immediately with "GDM could not write a new authorisation entry to disk...Error no space left on drive". When the boot eventually continues, a number of things fail with the same message about "No space left on device".
The next message starts "Could not start the X server due to some internal error."
Further to the above, starting "recovery" instead, the checks of partition fail and it seems obvious that the partition definitions have become corrupted. In the expert partion manager the lines for partitions seem correct except that there are no entries for 'mount point' and 'mount by' columns. Trying to edit these lines does not appear to allow entries for mount point or mount by - they are disabled. It seems likely the server is not mounting some partitions at boot which is why the kernel thinks the server is full. Is there some simple way we can use say fdisk to repair the partition definition without loosing anything of the server OS and data ?
