I am running ubuntu 10.4 only .
I assume to make the boot menu appear I have to add an entry into 40_custom file. Not quiet sure how to make that entry, or if it has to be positioned a certain way.
I am very new user to ubuntu and new to this community,first of all if i make anything wrong in this post please forgive and guide me,
My friend have a laptop which was running in windows 7.Last week he installed Ubuntu 10.04 Lucid Lynx.But after that boot menu is not showing and it is automatically booting to ubuntu.
So i pressed Shift key during boot and checked boot menu list,which is showing only linux OS ,Linux OS recovery mode and memtest86,No windows 7 option.
So I did following things.
Step1: Tried to find out the partitions using fdisk -l
2.So i tried to add a manual entry by editing the /etc/grub.d/40_custom file like below ,and changed the permission using chmod +x update-grub command
3.Run the update-grub command
But it is not updating the manual entry,The above update-grub command output showing the update-grub command not even entering into the /etc/grub.d/40_custom file because i put echo in that file in that ,and that also not coming.
I have 4 OS's on a publicly used pc. I want to hide the boot menu on GRUB2 and have it appear only when I press and hold the SHIFT key during boot. Will changing in /etc/default/grub GRUB_HIDDEN_TIMEOUT to 0 safely accomplish this goal? Also, what is the command for deleting all of the former kernel upgrades from the boot menu?
View 8 Replies View RelatedI have dual boot PC with XP and U10.10. Is it possible to set up dual OS boot menu that it is hidden in a way that i can still choose to boot which OS i want from that hidden menu.Or even better, is it possible to set up automatic boot into XP in a way that boot menu isn't shown at all but that I can call boot menu via keystroke (like you call boot menu to go into the safe mode in XP options by pressing F?
View 3 Replies View Relatedi just installed ubuntu 9.10 netbook remix, i made a partition (sda6) for it, first i had only opensuse, and when i was installing ubuntu, i put the bootloader in (sda6) the Opensuse bootloader is installed on MBR,
[code]...
i just installed ubuntu 9.10 netbook remix, i made a partition (sda6) for it, first i had only opensuse, and when i was installing ubuntu, i put the bootloader in (sda6) the Opensuse bootloader is installed on MBR,
Code:
fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb02fb02f
[Code]...
what should be my menu.lst entry to the 3rd drive intended for fedora to boot. for now this is what i did but didn't work.
# Other bootable partition config begins
title Fedora (on /dev/sda3)
rootnoverify (hd0,2)
kernel (hd0,2) vmlinuz PMEDIA=idehd
initrd (hd0,2) initrd.gz
# Other bootable partition config ends
I have a problem with GRUB 2 that I hope someone here can help me fix. Every time I boot I get an error because GRUB deletes that last part of the initrd line in /boot/grub/grub.cfg.
So this:
Code:
Becomes this (notice the missing "c" at the end):
Code:
And the windows part is also broken:
Code:
If I add an extra character at the end of the line it get removed instead and then it works. But only until next time the grub.cfg is auto updated. The error is only there when booting. Reading the file every character is in there.
After some system updates, I now have the Grub menu appearing every time I boot my computer. Is there any way to disable it, or make it automatically boot whichever entry is selected by default? I only have one operating system installed, so there's not much of a point to having to press enter every time my computer starts up.
View 4 Replies View RelatedWith the advent of Ubuntu 10.04 Lucid Lynx LTS People are migrating servers to the latest LTS. One fundamental thing that has changed is the move to Upstart. In the old days to stop multidaemon service such as Samba, one would simply type /etc/init.d/samba stop and to disable it from starting on boot one would simply type update-rcd samba disable.
Now its the year 2010 and in 10.04 it seems on has to edit a bunch of files, etc. Is there not an easy tool to correctly and properly disable services on startup in 10.04 consistently? in Redhat/Mandrake 10 years ago it was simply
Code:
service smb off
In Ubuntu 10.04 its
1) edit /etc/init/smbd.conf and modify the line that says
Code:
stop on runlevel [!2345]
and change it to
[Code]...
And one has to remember all these changes when the get ready to enable the samba service in the future? This can't be right.I know I must be missing something here. or maybe overlooked something in the upstart documentation.Which seems quite sparse by the way. So the question remains. How does one simply disable a multidaemon service starting on boot such as samba. Any tool to do this ? Is the above the correct method recommended by Canonical to disable services? and enable them?
Update Mgr got me a bunch of updates today, including a kernel (2.6.31-20). I was doing something else, and when it prompted me to do something with menu.lst, I accidentally accepted the default, which I think was to keep menu.lst unchanged.
As a result, the new kernel was installed but not added to menu.lst, so I guess I can't boot to it.
Is there a way to tell my computer, "make the entries into menu.lst automatically"
I guess I could put the entries in manually, but as a beginner, I'm pretty scared to be messing with that file...perhaps if someone has a link to an exceptionally understandable explanation...
I just finished an install with 4 OS's. DOS, XP, WIN7, and UBUNTU. They work fine no with problems. However, the menu entry to run memtest does not work, However on my other system it works. The failing system is an i7 and the working one is a Core Duo. Both have a lot of ram. The Ubuntu os was copied with GPARTED. So it is identical.The menu.lst was a copy/paste job and then the HDxx's modified as needed. Please take a look and tell me where I went wrong.menulst.txt
View 4 Replies View RelatedI uninstalled OpenOffice using Software Center and installed LibreOffice from the PPA using the instructions on this page:[url]
I can't find any way to launch it. Applications > Office used to have OpenOffice Writer in it. Now there are no menu items for LibreOffice any darn place.
There are times that I would like to open an app as root user without having to use the command line in order to do that. I learned of a nice app in the Fedora repos called beesu and I will show you how to set up a menu entry to be able to use this nice app.
From man beesu:
Code:
See man beesu for more information.
Beesu can be installed in Fedora with the following command:
Code:
IMPORTANT: Beesu must be installed in order to successfully complete this tutorial.
You can use beesu from the command line with the following example:
Code:
This will open gedit as root user after the correct root password has been entered into the password prompt. This is great. However, I'd like to open an app as root user without having to use the command line or alt+f2 run box. So, I wrote a small bash script that uses zenity to prompt the user for an app to open as well as the root password.
Copy the following code into a new text file and name it mybeesu.sh.
Code:
You need to change the /path/to bit in step 4 "Command" to reflect the path to which you saved the mybeesu.sh script. Click the OK button to save the new menu item.
Now, when you click the new menu item from the gnome menu, a zenity window will open asking which app you want to open. After that, a second window will open prompting you for the root password. If all goes well, and you entered the correct root password, your desired app should open as if you used su -c 'foo' to launch it.
I recently upgraded grub -> grub2 on my karmic box. Grub2 worked when chainloaded from legacy grub, and also the first time I tried it standalone. Both times the grub2 menu came up.
I ran vbeinfo at a grub2 command prompt, and found my monitor's native res listed - 1280x1024. I added that to my /etc/defaults/grub and then ran update-grub, and rebooted. This time no menu appeared and the default entry booted straight away. I suspected that the resolution was not supported for some reason or that the way I entered it in the config file was wrong, so I commented it out again in /etc/default/grub, and ran update-grub again - to no avail.
I have since tried lots of different formats for the GRUB_GFXMODE, such as 1280x1024@24, 1280x1024x24, and the normal 640x480, but none of them give me a grub menu. I have even tried using GRUB_TERMINAL=console, to no avail. I have checked the /boot/grub/grub.cfg file each time to make sure my changes were put there correctly by update-grub. I have also made sure that timeout was set to 10, and the hidden timeout was set to 0. My GRUB_CMDLINE_LINUX_DEFAULT="quiet".
I have reinstalled grub2, grub-pc, and grub-common, and I have dpkg-reconfigured them all too. I have no idea what to do to get my grub menu showing up again.
I've just installed FreeBSD 8.1 on /dev/sda4 (FreeBSD slice), without installing the boot loader from FreeBSD (I've selected None when prompted for boot loader in sysinstall). Now I want to use my existing Grub2 from already installed Ubuntu 10.10 to boot FreeBSD also.
After some reading, I've added to the end of /etc/grub.d/40_custom:
After running sudo update-grub, grup.cfg file shows my new entry. The problem is that after restart, I don't see the new entry in the grub menu.
Another question, If i used chainloader +1, that means I need to have the FreeBSD bootloader installed also on /dev/sda4 right? For chainloading booloaders?
I didn't get to that step, I first want to see the entry in the menu.
Any idea what I might be missing/misdoing? (I also checked for blank spaces in the menuentry like the wiki for grub2 says)
Having just upgraded to Ubuntu 11.04 from 10.10 I noticed that my Grub menu had not upgraded. The upgrade was not as straight forward as it should have been as the PC hung at the end of the installation resulting in a reboot and running dpkg in safe mode to get it all back up and running.
To fix the incorrect grub menu.lst file which was not updating, I renamed the original file and then ran sudo update-grub. It generated a new and correct file. However, my Windows partition was not listed as a Grub menu option.
[Code]...
I'm using Fedora 12 with Gnome and I have a slight problem with my places menu. I have entries in the list that I would like to remove, but cannot figure out how. I multiboot Fedora with Windows 7 and windows 98. My Places menus looks something like this:
Places
Code:
Home Folder
Desktop
Music .....
Now, if you notice there are 2 entries for both my 'Storage' and 'Windows 98' partitions. On of them will actually open up a window showing the contents of the partition, the other displays an error which basically says "Unable to mount, drive is already mounted". Right clicking on the entry has the same effect as left clicking, it just brings up the error message. They do not appear in the Bookmarks menu.
I'm trying to add an entry to the gnome menu for every users of a FEDORA 14 system, both
Code:
xdg-desktop-menu install --novendor --mode system osean-programmer.desktop
and
Code:
desktop-file-install osean-programmer.deskto
[Code]....
How to add the application launcher to every user's Desktop during the RPM installation?
I compiled QLWM window manager but it's not in GDM's session menu. How do i add it there?
View 1 Replies View RelatedIf i select Places -> Home Folder vlc starts and try to open the content of the selected folder.
Any idea which config file i should adjust to solve this behaviour?
I have openSUSE 11.4 KDE (64-bit). Very inexperienced Linux user. I just dragged Thunderbird's icon to the lower panel so that it can be launched quickly. But now when I go to Application Launcher -> Applications -> Internet -> E-mail, the Thunderbird entry is no longer visible.How do I bring it back?
View 3 Replies View RelatedI have Ubuntu Lucid, but this problem has been around since Feisty for me. Here's what happens: My menu.lst file has the following line in it:
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
root (hd0,2)
kernel /vmlinuz-2.6.32-22-generic root=UUID=de57202b-4cfd-4de3-8b3c-92c2267eb10a ro quiet splash vga=773
initrd /initrd.img-2.6.32-22-generic
Upon any kernel updates, or uninstalling old kernels that I no longer need, the hd(0,2) gets replaced by hd(0,0), which leads to not being able to boot, unless I manually reset the hd(0,0) back to hd(0,2).
Naturally, hiding the graphical grub screen on a regular installation is easy, by adding either "timeout 0" or "hiddenmenu" to menu.lst. But on a live boot, there seems to be no menu.lst - at least no accessible one.
Although, in some kiwi image types, you can specify boottimeout="n" in the image description's type element, it does not have the intended effect. Here is an example. The following type element's boottimeout attribute will invoke the first grub menu item instantly. Changing the value to zero, not only does not hide the grub screen, but seems to restore the default 10 second time out.
<type image="iso" primary="true" boot="isoboot/suse-11.3" boottimeout="1" hybrid="true" flags="clic"/>
Is there any way to hide the graphical grub screen in a kiwi live boot?
How can I add a menu entry when I right click my mouse system wide?
View 2 Replies View RelatedOk, first is it possible to take a program I wrote and make it to be a entry in the right menu of a file browser program.
Also, can this happen if the program is developed in Java?
OpenSuSE 11.4
Kde 4
Dolphin(file browser)
I have just installed KDE3.5.10 on S13.1 and have followed all steps required on the site at 'http://slackware.osuosl.org/unsupported/kde-3.5.10-for-slack13.0/' containing the packages, finishing with:
[code]...
You'll probably need to log out and back in again for the profile scripts to add the KDE3 stuff to your $PATH and $XDG_CONFIG_DIRS. When you log back in, KDE3 should start when you run X. Unlike LXDE, this install didn't automatically create a menu entry for gdm. Everything seems to be right, but I can't get the gdm entries I've tried to work. Could somebody who has also installed 3.5.10 kindly post the correct file contents?
I have a dual boot system with Windows 7 and Ubuntu 10.04 and have been been playing around with GRUB2 in order to customize the boot menu (background image, less menu item, etc). I've been successful in doing some things but my 40_custom file in my grub.d folder is missing! Here is what happens when I try to update my grub:
euri@euri-HP-6730b-FN021UT-ABA:~$ sudo update-grub
[sudo] password for euri:
Generating grub.cfg ...
[code]....
I've recently installed suse x64 kde in dual boot mode with windows. I have 2 primary partitions with ntfs with 1 for windows7 boot and other for data/storage. There is no boot provision for data partition. SUSE install is on extended partition. I am unable to run fdisk -l and boot info script for some reason, kde is freaking me out (used to use gnome for last 4 years). The GRUB shows data as a boot and it added an entry in its menu. I will like to remove that entry from menu list.
View 9 Replies View RelatedI have manually added an entry for Ubuntu in my grub menu, using Yast. But every time the kernel is updated, this entry disappears. On the other hand, the one for Windows, that was added during OpenSuse's installation, is still there. So how can I keep this entry for Ubuntu ?
Edit : when I save the menu configuration in Yast, I get the following message :
Code:
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kbuildsycoca4 running...
[Code]...