I want to install lubuntu 10.04 on my AMD 1,14 GHz, 256 MB and Nvidia GeForce FX 5500. But it doesn't boot from USB.
It writes: vesamenu.c32: not a COM32a image boot:
So, something's wrong. I tried to install lubuntu 10.10, but it just freezes. It shows that something crashed (timezones, layouts of keyboard,...)
Im trying to build an initrd image for my livecd using cpio -o -H newc, but the livecd can't boot. If I create the initrd image using mkfs.ext2 then it works.
View 2 Replies View RelatedMy laptop can't boot from cdrom becouse it is broken and it can't boot from USB becouse it has never been able. Ubuntu 8.10 now run in my laptop withgrub 1.I've just try the following trick.1) I put grub4dos in /boot2) I put iso image in /boot3) I add the follwing entrt in source.list
Code:
# =========== GRUB4GOS ===================================
title == Use grub4dos for the following entries: ==
[code]....
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies View RelatedI'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....
My HDD crashed (it wasn't completely disastrous, though). I was able to get my Ubuntu 10.10 partition of the disk with dd_rescue. I can see all of the data in the partition and everything. dd_rescue reported that there were no errors.Now, I have a fresh HDD, and I copied the image that I created with Gparted, and turned the boot flag on. I turn my system on, and all I get is a flashing cursor in the corner of the screen.I get the feeling that this would be easy for a seasoned user, but I'm not sure where to go. I originally got some information about cloning partitions here: [URL] But, it doesn't tell you how to reload the image after you make it.
View 2 Replies View RelatedGNU GRUB 0.97
Ubuntu 8.04.4
2.6.24-26
Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.
However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel
From grub:
Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.
Disk /dev/sda:
what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).
The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.
Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.
I tried installing Ubuntu 10.04 WS on my PC but it did not see any disks to install on. I believe this is because my drives are all configured as RAID. My mobo is an Asus M3A78-EMH HDMI AM2+ socket with an Athlon 2X 5000+ CPU. The chipset is AMD 780G. I have the BIOS configured for RAID drives and I already run Win XP x32 and Win 7 x64 on it. My boot drive is configured as 'RAID READY' and I have 2 RAID 1 disks consisting of pairs of SATA drives.
From what I have researched it seems that with some tuning it should be possible to install Ubuntu 10.04 but I have little Linux experience and don't want to mess up my existing drives. I have installed Linux before a few times and run it but never with RAID. Is anyone aware of an existing disk image that I will be able to install from on my system or would it be possible for someone to create one for me to use?
I have Ubuntu 10.10 installed on my laptop.Its a dual boot with XP, have been using ubuntu/xp for a while now..Till now i always used to remove older kernel images after ubuntu update, then update grub and do "sudo apt-get autoclean" never had any problem at all.i skipped the second step, i removed the old kernel image and did "Autoclean" on apt-get but forgot to update grub.
Now after i have reboot, when grub loads i can see only 2 "Memtest" lines in grub list and 1 "windows xp" line.the "Linux kernel generic" line is missing. I can boot in xp (have done just that to post this) but since there is no line in grub list to boot into Ubuntu, cant boot in Ubuntu.Is there any option, something i can do at "Grub" to boot into Ubuntu?
I already download Fedora 15 from website As ISO Image , How I can create Bootable CD Image? and it possible but it in USB as bootable
View 3 Replies View RelatedI recently performed a reinstall of ubuntu after mucking up my partitions, and I am running it dual booted with windows 7.
I recently performed a grub-pc update, but I didn't know what it was asking me to do during the process itself of updating the process.
It asked me at one point where to install grub, and I selected all my partitions because it suggested that if I didn't know. I think that may have damaged my windows section, which was also selection.
I've attached the output for:
Code:
Problem symptoms:
1) Weird upgrade error in apt-get
2) Unable to boot windows 7
3) Unable to activate proprietary drivers
4) Perpetually being reminded to restart
Yesterday, i just got my Fedora live DVD. When i tried to boot it from my CD/DVD ROM drive, it seems to hang when it's just about to finish loading. From one of the prevous threads, one of the members said that i had to have 2 partitions on my HD. Currently, i already have 2 partitions. Can someone give me advice on what to do??
View 3 Replies View RelatedUbuntu 10.10 doesn't boot at all. The liveCD only boots once every like 30 attempts, installing from liveCD froze, but the Alternate CD worked and installed ubuntu. Now when I try to boot into it using GRUB, it freezes at the beginning of the boot process.With normal boot it freezes at line: Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox.With recovery mode it freezes even before showing me anything
A little kinda like the liveCD, if I try like 30 times, it might manage to boot once in normal mode.That line keeps on repeating, the the xxx.xxx integer changes each time, and this goes on forever.I tried removing my floppy drive, but it didn't help.I tried to boot with fd0=noprobeThe one time it booted, when I restarted, it froze while trying to restart.
Debian-live-8.2.0-amd64-xfce-desktop.iso do not boot in uefi mode. I would like to know if live image can boot uefi mode? If not how can I do later from bios to install grub efi?
View 1 Replies View RelatedI'm new to fedora and when I boot from a cd I get the message: could not find kernel image. I currently have windows xp and my motherboard is and ix38 quad gt if that helps.
View 2 Replies View Relatedbasically put a new hard drive in my old computer and wanted to install fedora on it, downloaded fedora 12 dvd iso (3ish gb in size) have burnt it to a dvd disc, turned my laptop on and set it to boot from cd drive, restarted it, it reads the disc and displays the following message:
ISOLINUX 3.75 209-04-16 ETCD Copyright (C) 1994-2009 H.Peter Anvin et al
Could not find kernel image: Linux
boot:_
The uderscore is flashing and i can type stuff in but have no idea what to type in to find the kernel image, or why it cant find the kernel image.
i have been working with computers since the age of 11 "22 now" and have taught myself everything i know, from computer repair & networking to Web design, music production and Graphics design, using programs like photoshop, dreamweaver, sony acid, i learned it all myself, anyways that's just a little insight!!!
OK so here is my problem, i have an OLD P4 2.8 GHZ PC with 512MB ram, last year i was able to burn i believe fedora 9 to a CD and install it on this PC before i removed the drive to use as an external drive. "Dont know where the CD went"
I just recently purchased a 40GB hard drive and am looking to reinstall Fedora 14 on this P4 PC, i want to use this PC as a HTPC just for internet, ..... and stream videos, maybe some internet games etc etc, my problem is my main PC cant burn any cd/dvds due to the Drive's being burned out from burning xbox games at 4x on a regular basis, the PC i want to install Fedora on only accepts CD's and even then it barely reads anything!!
Now that you know my situation i want to know if i can take the 686MB 32bit iso image and put it on a 2GB usb drive and boot/install it to the HD that way on my old P4 PC, i want Fedora 14 as my main desktop, no partitions or walk arounds. If this helps the mobo on that OLD pc with the P4 is a p4vmm2 v5 i believe the p4 is 2.8ghz, ram is 512mb and i was able to install a 64mb nivida card agp 4x over the stock 32mb agp card it came with!
Last year windows xp was sketchy on it, i installed i think Fedora 9 and it ran great, but at that time it was a 120GB maxtor ide, and i decided to use it as an external drive for my main pc to back up alot of goodies, in the end the drive just randomly stopped working and just a few faint clicking sounds before it died. The current hard drive i will be installing on this P4 P4VMM2 mobo is a 40GB Seagate 7200. In the end do you think i can do a HD install from a USB stick with this P4VMM2 MOBO with a 40GB Seagate 7200 HD.
I have downloaded the i386-DVD.iso image and have burned it on a DVD using Nero Express 6, when it boots from the DVD, it give me an error message "Could not find kernel image: Linux" and the boot: prompt after that. I have burned another DVD using Infra Recorder with minimum write speed but with the same problem. I have Ubuntu already installed on the computer.
View 8 Replies View RelatedI have a MSI a6000 Laptop (that has given me a lot of problems installing Ubuntu.
I finally had to run Ubuntu from a CD in nomodeset
Then when I go to install Ubuntu the only options it gives (regarding my harddrive) are to format my whole hardrive or do the partitioning. I have seen screenshots though where there is a third option on the same page to install ubuntu alongside a prior OS and dual boot.
Does anyone know why the "install alongside a prior OS (dual boot)" option doesn't show up?
I installed Ubuntu 11.04 from a downloaded CD onto an old computer. It replaced the old Windows that was on it (that is what a wanted). The machine is a AMD-64, I think the video is a Radeon.When I reboot it only gives meubuntu login: I give the name, and then the password, and what I get is the following:gilles@ubuntu:`$How do I get my Ubuntu desktop?
installed Ubuntu 10.10 with my old System ( Windows 7 ) , the installation was successful , but when i run my pc i just find windows 7 without Ubuntu
View 4 Replies View RelatedI just downloaded Ubuntu Netbook 10.10 and created a boot usb stick.
My netbook runs ok from the stick (i.e. "Live CD" mode) and all seemed OK, so I went for an installation.
The install process appeared to complete ok, but when I restart the machine without the usb stick nothing happens - after inputting my power-on password, nothing at all: no disk activity or anything, just blank screen.
The netbook is an Acer Aspire One, the solid-state disk version, no hard-disk (110Ab ZG5)
I previously had the EasyPeasy implementation of Ubuntu NBR 10.04 running without problem (and NBR Karmic before that)
How do I begin to trouble-shoot this?
I'm currently having problems trying to install Ubuntu on my laptop.I have burnt off a CD that contains the latest Ubuntu 10.10 iso using the exact way the website tells me to.However, I can't boot from that CD. I can, however, boot from other CD's. For example i ran my Gparted Live CD to create a partition on my hard drive about an hour ago and that worked fine.
View 6 Replies View RelatedI've recently been trying to attempt to install Ubuntu on a partition on my macbook pro OS X 10.6.6. I have attempted to create a bootable USB stick (as I currently do not have any CD's/DVD's to use). I have followed the guide on the Ubuntu installation page twice, word for word, command for command. Everything goes flawlessly, all the files are visible on the drive when I checked, and I have never received any errors in the terminal. The problem arises when I attempt to boot from the USB, it simply does not appear under the options when I attempt to boot. I have also checked the Start up Disk under system preferences.
I have attempted the installation on two different USB sticks, and the same problem on both, flawless to install to USB, but then it is somehow not booting. I have checked with the USB company and directly from the website it says that the PNY attache is capable of this. It is the 4GB model.
I'm trying to dual boot 9.10 with Vista on an HP Pavilion Slimline (AMD64). I've tried both booting from a disk and using Wubi, and neither has worked. Booting from the disk takes me through the screen where I can choose to try Ubuntu without installing, but after selecting that, the desktop didn't load, the screen just went to black.
I decided to try Wubi, and it went well enough. Everything in windows worked, and upon rebooting, it was able to finish checking the installation. After one more reboot, I selected Ubuntu from the Windows boot manager, and then the grub command prompt appears. I can't seem do anything after that except reboot.
I have no idea what's going on with this computer.
I loaded Kubuntu 9.1 and got a mess in the Grub 2 Boot Menu, which I can't correct.
I get extra choices in the Boot menu, and the first few, which are supposedly for Kubuntu Karmic Koala all put me in a shell, which ends in a black screen, then shows up a shell once I hit "enter". Then I just have a "intramfs" (?) prompt.
So I went into Grub2 to change it, and it refuses to do it. All I get is a screen full of error messages every time I try, with no change. Apparently it is looking to access drive sdb8, which is non-existent. I DO have a drive sda8, though.
So with all the wonderfulness of the indirect system to change Grub 2 how am I supposed to set it right? The old Grub worked fine, and just took simple changes to the menu.lst file.
Can't somebody write a program that lets Grub 2 be changed from within the program, rather than all this running around trying to find what file to change, and how to get the change to work?
Just to be clear, here are the errors as they show up when grub-update is flailing around:
"error: cannot open '/dev/sdb' while attempting to get disk size
error: cannot open '/dev/sdb' while attempting to get disk size
Generating grub.cfg
error: cannot open '/dev/sdb' while attempting to get disk size
[Code].....
I donwload the Ubuntu 10.04 *32bits ISO image, and i burned each image with diferent speeds. Then, i tried to install, appears the Language Selection screen, all good. then, the Localization screen, I select Colombia (I'm from Colombia), clic on forward and the mouse shows the "loading animation", but the PC doesn't do anything (I let it for 30 minutes). I tried with the 2 CD, but ever the same result. And in some times when I try to out and reboot appears an error, so I have to reboot manually (with a button ).
And other problem, is that my BIOS doesn't let me boot form USB, so I can't install form USB. The last opportunity, and tried to install it, upgrading from Ubuntu 9.10, but in the instalation it gave me some errors, and in the 80% (or something like that), appears a window asking me to install GRUB AND EVERYTHING FREEZES, so I had to rebbot manually, and reinstall Ubuntu 9.10.
has anybody tried 10.10 on their PS3 (FW 3.15)? I first ran an update from 10.04 (which was working fine, including ext4 FS), and upon rebooting after the update, all I had was a black screen after PetitBoot. I then tried to do a clean install with the 10.10 PPC+PS3 Alternate CD, but same black screen after selecting any type of install from CD in PetitBoot. I then installed the OtherOS that's on the 10.10 CD (KBoot); same black screen. Went back to PetitBoot and tried the PS3 desktop 10.10 CD; same problem. I was almost ready to give up and reinstall 10.04 when I thought of using the "linux-old" option in PetitBoot. This loaded the newly upgraded Ubuntu 10.10 on my HD, with the difference that it's using kernel 2.6.32 instead of 2.6.35. This works fine. So here's my question (at last ): was the PS3 port of 10.10 tested by anyone before being pushed as a release on cdimage.ubuntu.com, or is there an incompatibility with kernel 2.6.35 that was never noticed, except for here where it didn't seem to go anywhere: [URL]? If I'm the only one left on earth with firmware 3.15 and interested in Ubuntu on PS3 at this point.
View 5 Replies View RelatedI downloaded the Lubuntu 10.10 Live-CD ISO and burned it to a CD-RW disc. The Lubuntu Live-CD fails to boot on my secondary PC. It boots fine on my primary PC. The PC on which Lubuntu fails to boot is a Dell Dimension L (year 2000). Celeron 566 MHz. 192 MB RAM. That PC has Xubuntu 10.10 installed on HDD. Xubuntu runs fine. The PC on which Lubuntu boots OK is a Dell Dimension 4100 (year 2000). PIII 733 MHz. 512 MB RAM. The failing boot progresses to a point where I get a purple screen showing "Ubuntu 10.10". Underneath the "Ubuntu 10.10" is a progress bar consisting of four dots. The progress bar continually shows progress, but after a few minutes there is no HDD or CD activity. After about seven minutes I get a blank bluish-gray screen. After waiting an additional five minutes I pressed "Enter" and was returned to my original purple screen. The progress bar continued to show progress, but there was no HDD or CD activity.
View 2 Replies View RelatedI'm installing Ubuntu server 10.04 LTS in several machines with identical hardware using clonezilla.Every thing is ok except than wen starting a cloned machine, grub waits the user to make a selection to boot from.The hard disk has 3 partition:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 14 112423+ 83 Linux
/dev/sda2 15 1059 8393962+ 82 Linux swap / Solaris[code].....
how to do to start automaticaly? This is the content of grub configuration file (/boot/grub/grub.cfg)[code]...........