So when I booted my system up today my second internal hard drive which is formatted to ext4 failed to auto-mount for me(I have an fstab entry for it). When I I tried to manually mount it from terminal it failed and suggested I run dmesg | tail and here is the output from said command:
Code:
dmesg | tail
[ 292.424199] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[code]....
So when I booted my system up today my second internal hard drive which is formatted to ext4 failed to auto-mount for me(I have an fstab entry for it). When I I tried to manually mount it from terminal it failed and suggested I run dmesg | tail and here is the output from said command:
Code:
dmesg | tail
[ 292.424199] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 292.424208] end_request: I/O error, dev sdb, sector 65
[ 292.424456] EXT4-fs (sdb1): unable to read superblock
[ 298.348591] DRS: unkown mode,default use 11N 1S AP
[ 298.348602] DRS: unkown mode (SupRateLen=8, ExtRateLen=4, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 301.371878] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 80
[ 306.211535] sd 2:0:0:0: [sdb] Unhandled error code
[ 306.211543] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 306.211552] end_request: I/O error, dev sdb, sector 65
[ 306.211581] EXT4-fs (sdb1): unable to read superblock
I've just loaded Vector Linux on my computer (it's a Pentium 4/2ghz my father-in-law gave us). It seems to be working well, however, I have a second hard drive in addition to the boot drive. This drive is from a previous computer that ran Mandriva Linux, so I would imagive VL can read it. I can't seem to locate it anywhere using the gui. However, I checked the system settings window under "storage" and the drive shows up. It doesn't show up in the "devices" area of the system tray. I don't think I can navigate to the drive using the "file system" window either..Is there something I can do to -- one, find the drive; and two, add the drive to the devices window so I can mount it when I need to (or, preferably, keep it permantly mounted -- like on a mac or windows computer)?By the way, the drive was the boot drive for the Mandriva computer, but the jumper is currently set to "slave."
View 1 Replies View RelatedI have an internal hard drive which is NTFS that I have some of my windows stuff on.Ubuntu seems to mount it only after I choose to open it from the places menu.I would love it if it mounted automatically on startup but I can't work out how to do this
View 1 Replies View Relatedwhen i powered on my computer i went to mount my second internal hard drive. Normally it just opens right up no problem but today for some reason it says that im "Not Authorized" to do it. same goes for flash drives. My comp is running ubuntu 10.04 . What should i do???
View 9 Replies View RelatedI got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedI have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
I've just put together a new machine and as I expected, there are some issues with hardware. I've just tried to set up the installation of ubuntu, got to the partitioning section and only my external hard drive is being picked up. The internal hard drive is a 1TB SATA drive plugged into a 6GB/s DATA port on my m/b (Gigabyte GA-P55A-UD4 running Intel i5 760 processor). I'm probably going to try the alternate CD to see if that works, but does anyone know if this is a common problem for any of my hardware? (I did a google but couldn't find anything).
View 3 Replies View RelatedI am running Windows XP on my PC. I installed a new SSD Drive, which is OCZ-VertexII 120GB. I would like to run Windows and Ubuntu 11.04. The Ubuntu 11.04 Live-DVD runs fine, but when I click on Install, I get to the Screen where it ask if I want to install Ubuntu Side by Side with Windows or want to replace Windows, Ubuntu does not recognize the second SSD-Drive. how to install Ubuntu onto the second SSD-Drive and install the Boot loader onto the First Hard-Drive?
View 2 Replies View RelatedI have appealed to anyone on this forum site for any help on installing Unbuntu 10.04.1 LTS on a MACBOOK PRO (Mid 2007 Model. Basically I've followed a few threads & posts on how to Quad boot a Macbook Pro & it seems pretty straight forward,however. Ubuntu is not playing ball for some reason?? The first attempt I tried I had the partitions as follows:
I am using a 500gb sata internal hard drive.
WIN 7 - 125gb
STORAGE - 15gb
WIN XP -125gb
MAC OSX - 180gb
FREE SPACE 50gb - Formatted DOS - Which would become the EXT4 & SWAP FILE partition.
After following instructions:
http://hydtechblog.com/2009/01/26/du...windows-vista/
[Code]...
when I load into Ubuntu 11.04 from my USB drive, why can't I access the files on my internal hard drive? I mount the drive but I cannot see any of the music, videos or documents contained on that drive (which is also an Ubuntu 11.04 drive). I was wondering so I could copy those files onto my external hard drive and reinstall since my Ubuntu crashed.
View 3 Replies View RelatedI can't mount it, and also since apparently debian doesn't care about the nasty systemd but I had to deal with that but I digress.
I cannot mount my itnernal drive, and even memory cards are listed as "permission denied" even though I am part of the disks group. I know that before systemd I could just edit a udisks config file but I cannot find out where it'd even be.
I've included my /etc/fstab.
Code: Select all# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
[Code] ...
I am part of the disks group, and am 90% sure that I edited the udisks file that says something about mount internal disk to allow active from allow_admin
The only udev rules that i've changed was the one to change the mount point for external drives to /media/drive_label instead of /media/$username/drive_label
Basically I'm trying to automount the partition after clicking on it in the file manager.
I've been thinking of buying a new internal hard drive, mostly because my 40 GB drive is beginning to get a little crowded. I haven't bought a hard drive in many years, so I don't know what brands are currently reliable. Years ago, I heard that the larger drives were much less reliable, but in recent years I have heard that is no longer true, so that it is cost effective to get a larger drive.
View 14 Replies View RelatedI went through the Fedora 11 DVD setup process up to the partition screen, which does show my external SATA drive correct as; /dev/sda when connected by eSATA, but it shows the internal drive which is a standard IDE, as; /dev/sdf , when it should be as; sdb, why ? I did run that fdisk -l in a terminal from one of my other installed Linux, and it did show drives as correct, ( sda, sdb ). I think this may be a issue related to the digital media card reader built into this 2006 Gateway desktop computer being detected as drives like Windows does and assigns drive letters, or is this some bug in Fedora 11 ?
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x826d56f6
Device Boot Start End Blocks Id System
/dev/sda1 * 1 26 208813+ 83 Linux
/dev/sda2 27 1958 15518790 83 Linux
[code]....
I have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
Recently i bought an external HDD, and unfortunately my internal HDD is not working.
Instead of buying new internal HDD, can i make external HDD work as internal HDD.
I have got 2 hard drives running one one of my computers which i am running as an server. I was using Ubnntu Server which is good but i have decided to change the way that i am going to use the server and have installed Xubuntu over ubuntu server. However in the installation the hard drives shwn when it asked where i would like to install the operateing system. It installed sucessfully and is working but it cant mount my other hard drive which has all of my data on it.
I had tried mounting it throught the command prompt and had no success. After which i have checked if the the toher hard drive is being reconised by Xubuntu and it is as sdb1 but i caqnt mount it and get to my data. I hoped that i can try and put in my ubuntu live cd and see if it can pick the seoncd hard drive up and mount it which it has not been able to.
I have 2 20 gigabyte hard drives atm the moment and i am not adding the others until i can get to all my stuff again form the other hdd.
id installed ubuntu 10.04 on 160GB hard drive and now i cant see the other hard driveonly ubuntu installed ...
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
[code]....
I want to pull a few things off this external hard drive I have that is an ubuntu install from last year. However, my mac won't recognize the file system and mount it so I can pull the few files I need off of it.
What's the trick to getting a mac to find an ubuntu hard drive?
My other option is removing my laptop hard drive, installing the ubuntu one, opening ubuntu manually, burning the information I need to a CD, or a usb key, and then removing the ubuntu hard drive, and reinstalling my mac osx drive to the laptop bay.
I'mm trying to mount a hard drive in Ubuntu but it doesn't work i typed the following commands
Code:
cd ../..
sudo mkdir /media/windows
sudo mount /dev/sda /media/windows -t ntfs
and then it says
Code:
Error opening '/dev/sda': Read-only file system
Failed to mount '/dev/sda': Read-only file system
i wanted to access my files, not write to it, so is there anyway to mount as read only?
I'm very new to Linux and recently setup a desktop PC with Puppy 5.2.5. only. I chose to have a permanent install on the hard drive and loaded additional PETS and utilities as I thought needed for my use. Last night after immediately booting up the PC I had a power cut lasting a few minutes. When power returned and I repowered the PC, I found during Puppy's boot sequence it reported an error and remained in what appeared to be a console mode - did not carry through and load my desktop. So I inserted the Puppy CD and booted from that but I'm afraid I'm not familiar enough with Linux to understand how I can get back my original desktop setup and run once again from my hard drive without having to go back to scratch.
View 5 Replies View RelatedI've tried to be clever but as usual I didn't think before acting and missed a small detail.
I have recently installed karmic (dual booting with Vista) on my dell xps laptop. The install went fine, I'm very happy with my new OS.
I bought a new Seagate 500GB portable external HDD. I got a bit over-excited and installed karmic on the external drive. This worked fine and I got a lovely (but slow to appear) Grub2 menu showing my vista and both ubuntu options.
My problem is that now, when I unplug the external drive, Grub fails and I get a grub rescue> prompt. So I need the external drive to be plugged in if I want to boot.
It seems I have done something to the grub configuration. I have read around the subject but I am not confident about how best to proceed.
I understand there is an 'advanced' option in the installer which will allow me to choose where to install grub. Presumably I want it on the internal drive so that I can boot without the external one plugged in.
Am I right in thinking I can just pop in my install disk and redo the installation?
If I indicate I want to install Grub on the internal drive, which partition should I aim for?
Will I get a grub option for booting to the external drive?
Will I be able to plug the external drive into a different machine and boot from it?
I haven't done anything with the fresh install on the external drive so I don't mind losing that.
I'm new to the ubuntu forums as well as ubuntu. I'm excited to learn more about linux itself as well as ubuntu. I got ubuntu 10.04 running on my toshiba L505D laptop by disabling acpi in the boot commands. My first question is how do i do this permanently, is this bad, and would updating fix the issue? If so how would I go about updating.
Secondly, when the external hard drive I installed ubuntu on is not plugged in to the laptop, GRUB rescue comes up. I kind of like this because it provides a level of hardware security. I would however like to know how to load my windows partition encase the external hard drive fails.
I am having problems mounting an iso on my external hard drive. I do not want to move it onto my linux partition because it is 3.6 GB. I have a directory made (/media/iso) that I would like to mount it in, but if that doesn't work then I don't care where it goes. After I mount it I want to be able to run it using Wine, but that will come later. For now I just need to get it mounted. And, of course, I am fairly new to linux/ubuntu.
View 2 Replies View RelatedI've been checking the Forums and I can't find anything similar to my problem yet. I have 2 external drives that my UBUNTU 9.10 doesn't recognize, although I can see them perfectly in Win XP.I was using them in Ubuntu until 2 weeks ago, when this problem started and I can't find a way to see/mount them again. GPARTED doesn't find any of them; and when aply fdisk -l, can't see them either (only my internal HD).
View 2 Replies View RelatedI run 10.04 lucid in a laptop with EXT4 as filesystem, and I tried to mount an external hard drive from a Windows that, obviously, uses FAT32. Its the first time I try to mount a hard drive (external) since the upgrade to 10.04. Do I have to download some packages via synaptic? If not, what do I have to do?
Plus, I have run
Code:
sudo fdisk -l
and this is what I get
[Code]...
I would like to know how to get brassero to look at my 2nd hard drive I can only see my main HD. I have music files on my other drive.
View 1 Replies View RelatedInstalled ubuntu 10.4 on a formatted hard drive IDE. desktop has two other drives , one SATA drive and one SCSI drive. SCSI drive has windows.
Both windows and ubuntu load fine through GRUB2 etc
I had installed WUBI before on the SATA drive and then i uninstalled it.
problem is that when i log in to Ubuntu i see on fdisk
But i cannot access the SATA drive /dev/sda i tried mounting the drive but i get an error saying this is mounted as /dev/sdb5
How do i mount the SATA drive to get access to the drive ? i messed around with this drive when i was using WUBI. i.e. tried to mount it to recover grub but never got it working. Now somehow it seems that this old mounted drive is messing with my current Ubuntu install.
How to recover my fstab is shown below:
Changed the connect sequence in BIOS and mounted the volume using sudo mount /dev/sdb1 /media/sdb1
im runing ubuntu 10.04.
i just had a init input output error, (and ubuntu wound not boot) so i decided to boot from my live USB to see my fstab file. It booted about 5 times then started to return an input/output ewrror (cant mount)
Hard drive checks ok as per the bios. Ubuntu will not boot and cant try any other OS (no CD drive) (I have tried 3 diffrent live USBs) what next?
Windows XP Laptop hard drive is stuck in a hibernated mode. Will not let me access it through Windows, period.
I loaded Ubuntu Live on the suggestion of a coworker in order to retrieve my important files by hooking up the Windows HD through a USB adapter (Inland).
Ubuntu recognizes the 160GB HD, but refuses to mount the drive because "Windows is Hibernated." I Know my disk is hibernated, I need a way to get my important files from the drive...
(Screen Shot Attached in .jpeg format)
I know very little abount Ubuntu so please keep that in mind with your gracious replies.
