I just loaded the new upgrade and now the top bar does not appear.
If the cursor moves over the top bar area the menus drop dow, but every else is black-- power button, wireless icon,... all gone.
How do I get these back?
I recently upgraded to 10.04 Lucid a while ago. I don't know if anyone else needs this feature but I use it a lot.
MOUSE-OVER RHYTHMBOX PLAYER ICON FUNCTIONALITIES
In previous releases, one of my favorites about RhythmBox was the fact that if you need to control things such as volume or check presently playing track, you can do so just by a mouse-over action and a scroll mouse over the Top-panel tray icon. It's all gone. Need to say the new click-on is good too but it's without the mouse scroll or Mouse-Over INFO
How can I re-enable it please? Why should I click on RhythmBox player each time just to control volume
BUILT-IN MIC CEASED WORKING
Since upgrading to 10.04, only external mics work
-I upgraded my Ubuntu install and the system boots except it ignores my two data drives. I get a prompt to continue waiting, skip or manually recover. If I skip I boot into Ubuntu. The fstab entries for the data drives are:
[Code]....
I booted with a knoppix cd and both drives are found and contain data. What steps can I take to remount these drives and recover the data?
I upgraded to 2.6.35-30.56 last night and now my system's a little flaky. Everything seems to be running ever-so-slightly slower and fullscreen flash is now choppy. The weird thing is the Grub menu upon bootup only shows the latest kernel, but not the previous kernels. Doing an "ls" of the /boot folder only shows this newest kernel. I'd like to revert back to the previous kernel but don't know how.
View 2 Replies View RelatedI have upgraded my acer 2930 and I have lost my audio output
View 5 Replies View RelatedI am a linux noob and have been searching for a couple months to a fix for my problem but now I just need I have two hard drives. One with vista and the other with ubuntu, storage space, and some other partition. I was dual booting windows and ubuntu jaunty jackalope then one day I decided it would be fun to upgrade to 10.04 so I did. When I tried loading windows from grub it just showed a blinking cursor forever. And while attempting to fix the problem by adding windows to the grub menu.lst file it dissapeared from the grub options.
[Code]...
I upgraded my Edubuntu 10.10 LTSP server to 11.04 and I've lost my network. The server boots fine but none of the workstations connect. They start the boot process but hang-up as it starts to load the GUI.The screen on-which the computers hang displays Ubuntu 10.10.Do I have to manually update the LTSP image?
View 1 Replies View RelatedI was running 8.04 and my internet (Comcast) comes via a Motorola SB5100 cable modem then into a Netgear router then into my Dell. When I upgraded to 10.04 yesterday, I lost the wired connection. The wireless connection still works fine, but I have not been able to get a wired connection. Also, most online solutions reference the Network Manager, which is nowhere to be found.
Anyone have any solutions? I would be willing to revert to 8.04 if needed, as that worked fine, and obviously I quite regret the upgrade!
Ubuntu and other Linux distros have a limited useful life, for example Ubuntu only supports its current release until April 2012. If I decide to upgrade at that time, are my customizations lost, also add on software lost e.g. Codeweavers Crossover Office, and software running inside Crossover, etc.?
View 6 Replies View RelatedJust upgraded from Ubuntu Server 9.04 to 10.04 and in the process my hostname was lost.
Code:
Although configure file looks fine:
Code:
The following lines are desirable for IPv6 capable hosts
Have set hostname with:
Code:
But doing it this way you cant use '_' ..
Just upgraded to 9.10 and lost the ability to use my scanner with VueScan. No help at their site or the Avasys Corp. site, where downloads of the "driver" refuse to load due to various conflicts. Has anyone gotten VueScan to work with 9.10 and how on earth did you do it? (Scanner is an Epson Perfection V500 Photo.)
View 7 Replies View RelatedI upgraded to ubuntustudio last night while I was sleeping, and when I woke up this morning and restarted the laptop the sleek desktop environment was gone. I actually liked that layout. I can't find a way in the settings to re-enable it. en uninstalled the ubuntustudio suite and restarted the system. Nothing changed. Do I have to reinstall 11.04?I really love the new layout..as a side note, I had a small bug with it when I tried to enable the compiz effects. when I enabled the rotating cube and restarted the system the menus were gone and it was only a blank desktop
View 2 Replies View Relatedi had a dual boot with xp and lucid lynx, then upgraded the xp to win7. windows commonly overwrites grub with it's bootloader. and so it did. now i can't access my lucid OS. i need to get grub back (i need to get lucid back).
here's my fdisk:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
Lost my desktop effects when I upgraded to Ubuntu 10.04LTS
from 09.10.
Card is nVidia G96 [GeForce GT 120]
I run Debian with Gnome on a beat up workhorse ThinkPad. I upgraded to Jessie last week with just one issue. Before the upgrade, I could plug in a USB drive (I use a couple of WD MyPassports most often) and they would mount, read, and write without a hitch.
Since the upgrade, when I plug in a USB drive, the file manager (3.14.1) sees the drive, but when I click on the drive to access/mount it, I receive a dialog box reading: Oops! Something went wrong. Unhandled error message: Error when getting information for file '/media/user/MyPassport1': Input/output error.
If I hit the little “eject” button in the file manager, then mount the drive as root from a command prompt [e.g., mount -t ntfs-3g /dev/sdb1 /media/external] I can run a directory of the drive, but ls -l /media/external fails. From the command prompt I am unable to perform reads or writes to the drive.
Rebooting into recovery mode (i.e., without Gnome), I get the same behavior with CLI messages reporting I/O errors with the drive. I can run a directory, but ls -l, reads, and writes fail.
This behavior is the same on all three USB ports. It is not limited to these MyPassport devices.
The drives work flawlessly on another headless machine upgraded to Jessie the same day. And on another still running Wheezy.
If I boot the ThinkPad from a live CD (Mint 14, I believe) the USB drives mount, read, and write fine.
My BIOS is up to date, 1.52.
lspci -v says this about USB ports:
Code: Select all00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 1880 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
[Code] .....
I upgraded a week ago to ubuntu 10.10 (amd64). I was unable to boot in 2.6.35-22 so I have been using 2.6.32-25. I tried again last night after installing updates to 2.6.35-22. Still no luck.I gave up since this was much like what happened a week ago and I couldn't find any solutions then. (I ran memtest then.)
View 3 Replies View RelatedThe software manager has been nagging me to upgrade from 9.10 to 10.04 for some time now. I finally gave in and clicked on Upgrade. After the upgrade completed, my computer won't start. It just flashes Ubuntu for a split second and goes to a black screen. I happen to have the 10.04 CD from Canonical, and I tried that, and it won't launch the installer either; just a logo and a black screen. Since I can't even get to the terminal to diagnose and fix whatever's wrong, I'm installing 9.10 from the CD that I ordered from Canonical a long time ago. I went through all the graphical options just like the first time I installed 9.10, and it's in the process of installing right now.
I don't really have time to futz with it because I need my laptop for when I go and visit my mum for Thanksgiving. Maybe I'll try after the holidays if I can get some feedback on what might have gone wrong with 10.04.
I've looked in the grub.cfg file, and it has :
Code:
#
### BEGIN /etc/grub.d/30_os-prober ###
[code]....
I have a 10.04 installation upgraded from 9.10 somewhere around the first beta.However, since a couple weeks I have the problem that I cannot use nano anymore.
Code:
mypc:~$ nano
Segmentation fault
I've tried to do apt-get remove nano then installed but stil the same,Even tried apt-get purge but with no avail.
I upgraded 9.10 to 10.04 and now it won't boot. The way 9.10 used to boot was after turning on the computer it would go through the bios screen and then a screen would come up and list both operating systems, Windows Xp and Ubuntu. XP would be highlighted and would normally boot if I did not change the highlighted area. If I changed the highlighted area to Ubuntu it would boot into Ubuntu 9.10. Now after doing the upgrade, it gets to the same screen with the two operating systems listed.
When I change the highlighted to Ubuntu an error message is briefly displayed and then it goes back to the screen that lists both operating systems. I think the error message says something like couldn't find Ubuntu, or something similiar to that. Windows XP runs fine when I highlight Windows XP in that first screen, but I want to be able to run Ubuntu. I have Ubuntu on a secondary drive, but shouldn't it have rewritten the upgraded files on that same drive that had 9.10 on it?
I upgraded the Ubuntu 10.04, and afterwards I can't print. Cups won't detect printers, hp-setup won't, hp-probe won't. Tried rebooting, reinstalling HPLIP, & CUPS. Installed latest version of HPLIP. did a purge of HPLIP and CUPS, and reinstalled, rebooted.
View 4 Replies View RelatedI had upgraded to 10.04 but can not use kernel 2.6.32-22.32+, I had to go back to kernel 2.6.31-21. because of the default video driver had change from the one kernel to the other, and I do not know how the correct it. In 2.6.32-22 the font would change and to a smaller size and I can barely view anything because it looks like some two year old puke a box of crayons all over the screen.
Second issue is it does not matter what power-saving mode I am in, in 5 minutes time it with go into suspension. Or right after coming out of hibernate, it will go into suspension indefinitely and no coming out of it and must to a hard boot.
i just upgraded from 9.10 to 10.04 and now i cant get win xp to boot. win xp will show up on the grub list but when i select it all i get is a blank screen with a cursor flashing in the top left corner. i dunno whats happend, i have never had many problems with dual boot.
View 6 Replies View RelatedUpgraded to MM and it boots, desktop and apps run but cannot access synaptic - gives brief error message. In terminal, ran "sudo apt-get update" and got this message:
Reading package lists... Error!
E: Problem parsing dependency Depends
E: Error occurred while processing gsfonts (NewVersion1)
E: Problem with MergeList /var/lib/dpkg/status
E: The package lists or status file could not be parsed or opened.
While using Ubuntu 10.04 my system worked perfectly, now that I've upgraded via the Upgrade Manager, there is no sound on my system. My computer is very Ubuntu friendly, as I've never had this problem with any other version of Ubuntu. What can I do? If I need to reinstall 10.04, or roll back to 10.04, how do I do that? If I can fix by reinstalling 10.10 how do I do that. I dual boot with Windows 7 Pro and Ubuntu 10.10.
View 1 Replies View RelatedSo I was on 8.04, and I decided to hit the upgrade button on the gui to upgrade to 10.04. Well the upgrade went fine and all...until I rebooted. Now I get this
Starting up .
mount: mounting none on /dev failed: No such device
udevd[984]: error getting socket: Invalid argument
error initializing netlink socket
udevd[984]: error initializing netlink socket
[Code]...
I found some other posts and tried adding the rootdelay=35 and acpi=off but those did not fix it. This is a virtual machine running on VMWare ESXi 4.1.
I have Lubuntu installed on my EEEP 1005HAB. I just successfully upgraded to Naughty Narwhal and it is asking me for my username and password. They don't work. I type my name and password in exactly like I did every time I logged in before, and nothing happens, it just gives me a blank username box again.
View 4 Replies View RelatedAfter upgrading to Ubuntu 11.04 I only get the text mode login. I have a ATI Radeon HD 3600 card and before upgrade I used the propiertary driver (to make the dual screen mode work).I have tried to download the driver again from ATI and installed that but it does not helped.I have put the Xorg.0.log and some other outputs in http://83.251.70.81/X/
View 3 Replies View RelatedI upgraded from 10.10 to 11.04 via the update manager and somehow in the middle of it, the package failed. And so I carried on using the ubuntu, rebooted and now the disk is not ready and cannot mount. Press S to skip or M for manual recovery. Skip does nothing, only can use manual recovery.I tried everything from the ubuntu forums & google from other people who had the same problem. The problem is my root terminal on manual recovery doesn't have networking.Only can use liveCD which I still can't connect to the internet because I use wlan0 from ndiswrapper.
I am a dual booter of Ubuntu 10.10 on one partition and Windows XP on other. I edited the grub to boot those. One HDD is partitioned into 2 drives so one partition holds XP and the other partition is a "translator" that holds files which both ubuntu and XP can access. (don't ask me why, I cleaned the dust off my PC recently after 3 years )My outputs are:
/boot/grub/menu.lst
Code:
title LINUX - Ubuntu 10.10 - kernel 2.6.35-28-generic
root (hd1,0)
kernel /boot/vmlinuz-2.6.35-28-generic root=UUID=85de06c5-cf3e-46b8-8c14-2c217be8dd9d ro vga=0x317 splash
initrd /boot/initrd.img-2.6.35-28-generic[code]....
- I commented the UUIDs, that doesn't work.
- I tried remounting it, no effect.
- I fsck'ed it, no effect.
- I booted using LiveCD but cannot connect to the internet due to wireless.
- Cannot apt-get update & upgrade due to no internet.
That's all I remember cos I basically tried alot different ways and cannot get it to boot.I am thinking of formatting the mess and start all over again but I don't really want to do that because it is a good system, just that the grub file and fstab is kinda cluttered.
I recently upgraded my vps from 8.04 to 11.04.
When I run apt-get upgrade I get
Code:
If I try apt-get install -f I get
Code:
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
Suggested packages:
The following NEW packages will be installed:
