Ubuntu Installation :: Upgraded To 10.10 - Now No Sound?
Dec 4, 2010
While using Ubuntu 10.04 my system worked perfectly, now that I've upgraded via the Upgrade Manager, there is no sound on my system. My computer is very Ubuntu friendly, as I've never had this problem with any other version of Ubuntu. What can I do? If I need to reinstall 10.04, or roll back to 10.04, how do I do that? If I can fix by reinstalling 10.10 how do I do that. I dual boot with Windows 7 Pro and Ubuntu 10.10.
View 1 Replies
ADVERTISEMENT
Feb 13, 2010
I have upgraded from Ubuntu Upgraded 9.04 to 9.10 . Now there is no sound output. But it was working fine with Ubuntu 9.04
View 1 Replies
View Related
Nov 11, 2010
I recently upgraded from 9.04 to 9.10 (9.04 support just ran out). Ideally, I'd upgrade further to 10.04 or 10.10, but I am somewhat bandwidth limited, and so the additional 1.5GB upgrade to 10.04 is a last resort. After upgrading, I picked up a nice crackling sound. It seems to be tied to activity. Typing up this post resulted in a few crackling sounds a minute, but scrolling up or down, resizing windows, or doing anything more intensive (such as listening to music), and the frequency picks up.
lspci lists two audio devices: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)01:00.1 Audio device: ATI Technologies Inc HD48x0 audio Though I believe the second one is for a port on my video card, and thus the first one seems to be the one actually in use. If it matters at all, I'm running 64-bit, and am currently dual booting with Arch Linux (which has its own audio issues, and I was putting off tracking down because Ubuntu worked fine).
View 1 Replies
View Related
Jan 3, 2010
I am currently running 9.04 on an HP Mini 1033CL.When I first upgraded to 9.04, my sound card would not work. Finally, about 3 months ago, an update changed that. Now, I see that 9.10 is available, but I am nervous about installing it. Are there any foreseeable problems I need to know about? Keep in mind, I know little about Ubuntu and use it on my netbook (my fun computer) because it is free and I hate windows. Therefore, if there are buggy problems I have to adjust in bios or by tagging something, or whatever, I have no idea how to do it. 9.04 seems fine, so why upgrade?
View 4 Replies
View Related
Jul 8, 2010
Since upgrading from 9.10 to 10.04 sound now only works some of the time. One boot it will work perfectly and another boot it wont, the gnome sound mixer basically says that it can't detect a sound card.
I've compared lsmod when it does vs doesn't work and I've noticed...
Working:
Code:
Not working:
Code:
So it seems like the driver/module isn't detecting or initialising my card on some boots.
View 7 Replies
View Related
Jan 3, 2010
I upgraded to UBUNTU 9.10 and now my sound card is not working. The card is listed in the sound preferences Hardware but not in the input or output sections.
View 6 Replies
View Related
May 17, 2011
I ended up upgrading my wine version to 1.3.20 before it was released to the PPA repos. I downloaded it via git, compiled & installed, but now it did not detect my drivers anymore. It even warned me when i ./configure'd it, but I didn't listen. I tried, also, remove purge all wine packages I own and reinstall them from Ubuntu, but the dud 1.3.20 version is still installed. Is there a way to bring the sound back? Or, is there a way to revert this installation and make me able to install 1.3.19 back?
The following message appears when I access the "Audio" tab @ winecfg:
Code:
Found driver in registry that is not available ! Remove 'alsa' from registry?
View 3 Replies
View Related
Jun 18, 2010
I have recently upgraded to 10.04 and try as i will I cannot get Skype to work. Sound is very patchy and hence unintelligable. Worked fine in 8.04 usung alsa.
View 1 Replies
View Related
Jan 22, 2015
I upgraded to Jessie today and found that I have no sound.
Code: Select all# uname -a
Linux ath 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08) x86_64 GNU/Linux
There is no sound card on the motherboard. Sound worked previously through HDMI from a Nvidia GTX570
Code: Select all# lspci|grep Audio
09:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1)
Code: Select all# aplay -l
aplay: device_list:268: no soundcards found...
[code]....
View 8 Replies
View Related
Aug 31, 2015
I have upgraded (twice) to 8.1 and I get constant crackling sound - interestingly only from my left speaker. It starts already after the GRUB boot, and when logged in it just cracks all the time.
- in Wheezy there is no this kind of problem
- I have installed Jessie (crackling), fresh install back to Wheezy (no problem), fresh install again Jessie (problem), back to Wheezy (no problem), and now Jessie (again problem).
- the volume slide is jumping like crazy together with crackling. There is no chance to manually change it.
I have managed (by some unknown chance) to set profile to off, and now it disappeared. However, it comes back ON when rebooted.
View 5 Replies
View Related
Sep 20, 2010
After upgrading to the latest Wine, I find one of my most prized Win apps no longer works properly (no longer detects sound hardware). Seeing as the previous version (1.2.0-2) of Wine worked fine, I have located its (16) rpm's in the Yum cache, but irrespective of which one I double-click to install, it fails, complaining one of the other packages isn't already installed. Shouldn't the installation-manager automatically detect that these all of these dependent-on-each-other files are present? The 'newest' previous version in the repository is 1.1.38 - really old in other words - and my app works with it but I'd really like to install the newer version in the Yum cache.
View 3 Replies
View Related
Dec 25, 2014
I just installed wheezy and upgraded to jessie. I had previously gotten sound working in wheezy by installing the flashplugin-nonfree and flashplugin-nonfree-extrasound packages, after configuring my headset in system settings. However, now I can't get sound to play in firefox. I've installed flashplugin-nonfree, flashplugin-nonfree-extrasound, and pulseaudio, still without luck. The volume is turned all the way up in alsamixer, sound tests play fine, and I can play music in VLC without any problems. This leads me to believe it's not a problem with drivers, but with some package I'm missing that will allow firefox to play sound. Sound wasn't working in the default video player either, before I installed the flash plugin. Is there something I'm missing?
Also, sound doesn't play on Konqueror either (KDE browser), which seems to indicate it's a problem with flash and not with firefox itself. After removing the flash plugin and installing pepperflashplugin-nonfree to ensure the pepper plugin was used instead of flash, sound still would not play in chromium, so I reinstalled the flash plugin and still don't have sound in any browser.
View 1 Replies
View Related
Oct 21, 2010
I upgraded a week ago to ubuntu 10.10 (amd64). I was unable to boot in 2.6.35-22 so I have been using 2.6.32-25. I tried again last night after installing updates to 2.6.35-22. Still no luck.I gave up since this was much like what happened a week ago and I couldn't find any solutions then. (I ran memtest then.)
View 3 Replies
View Related
Nov 12, 2010
The software manager has been nagging me to upgrade from 9.10 to 10.04 for some time now. I finally gave in and clicked on Upgrade. After the upgrade completed, my computer won't start. It just flashes Ubuntu for a split second and goes to a black screen. I happen to have the 10.04 CD from Canonical, and I tried that, and it won't launch the installer either; just a logo and a black screen. Since I can't even get to the terminal to diagnose and fix whatever's wrong, I'm installing 9.10 from the CD that I ordered from Canonical a long time ago. I went through all the graphical options just like the first time I installed 9.10, and it's in the process of installing right now.
I don't really have time to futz with it because I need my laptop for when I go and visit my mum for Thanksgiving. Maybe I'll try after the holidays if I can get some feedback on what might have gone wrong with 10.04.
View 9 Replies
View Related
Apr 29, 2010
I've looked in the grub.cfg file, and it has :
Code:
#
### BEGIN /etc/grub.d/30_os-prober ###
[code]....
View 3 Replies
View Related
May 11, 2010
I have a 10.04 installation upgraded from 9.10 somewhere around the first beta.However, since a couple weeks I have the problem that I cannot use nano anymore.
Code:
mypc:~$ nano
Segmentation fault
I've tried to do apt-get remove nano then installed but stil the same,Even tried apt-get purge but with no avail.
View 2 Replies
View Related
May 27, 2010
I upgraded 9.10 to 10.04 and now it won't boot. The way 9.10 used to boot was after turning on the computer it would go through the bios screen and then a screen would come up and list both operating systems, Windows Xp and Ubuntu. XP would be highlighted and would normally boot if I did not change the highlighted area. If I changed the highlighted area to Ubuntu it would boot into Ubuntu 9.10. Now after doing the upgrade, it gets to the same screen with the two operating systems listed.
When I change the highlighted to Ubuntu an error message is briefly displayed and then it goes back to the screen that lists both operating systems. I think the error message says something like couldn't find Ubuntu, or something similiar to that. Windows XP runs fine when I highlight Windows XP in that first screen, but I want to be able to run Ubuntu. I have Ubuntu on a secondary drive, but shouldn't it have rewritten the upgraded files on that same drive that had 9.10 on it?
View 9 Replies
View Related
May 30, 2010
I upgraded the Ubuntu 10.04, and afterwards I can't print. Cups won't detect printers, hp-setup won't, hp-probe won't. Tried rebooting, reinstalling HPLIP, & CUPS. Installed latest version of HPLIP. did a purge of HPLIP and CUPS, and reinstalled, rebooted.
View 4 Replies
View Related
Jun 20, 2010
I had upgraded to 10.04 but can not use kernel 2.6.32-22.32+, I had to go back to kernel 2.6.31-21. because of the default video driver had change from the one kernel to the other, and I do not know how the correct it. In 2.6.32-22 the font would change and to a smaller size and I can barely view anything because it looks like some two year old puke a box of crayons all over the screen.
Second issue is it does not matter what power-saving mode I am in, in 5 minutes time it with go into suspension. Or right after coming out of hibernate, it will go into suspension indefinitely and no coming out of it and must to a hard boot.
View 6 Replies
View Related
Jun 24, 2010
i just upgraded from 9.10 to 10.04 and now i cant get win xp to boot. win xp will show up on the grub list but when i select it all i get is a blank screen with a cursor flashing in the top left corner. i dunno whats happend, i have never had many problems with dual boot.
View 6 Replies
View Related
Oct 17, 2010
Upgraded to MM and it boots, desktop and apps run but cannot access synaptic - gives brief error message. In terminal, ran "sudo apt-get update" and got this message:
Reading package lists... Error!
E: Problem parsing dependency Depends
E: Error occurred while processing gsfonts (NewVersion1)
E: Problem with MergeList /var/lib/dpkg/status
E: The package lists or status file could not be parsed or opened.
View 1 Replies
View Related
Feb 18, 2011
So I was on 8.04, and I decided to hit the upgrade button on the gui to upgrade to 10.04. Well the upgrade went fine and all...until I rebooted. Now I get this
Starting up .
mount: mounting none on /dev failed: No such device
udevd[984]: error getting socket: Invalid argument
error initializing netlink socket
udevd[984]: error initializing netlink socket
[Code]...
I found some other posts and tried adding the rootdelay=35 and acpi=off but those did not fix it. This is a virtual machine running on VMWare ESXi 4.1.
View 9 Replies
View Related
Apr 29, 2011
I have Lubuntu installed on my EEEP 1005HAB. I just successfully upgraded to Naughty Narwhal and it is asking me for my username and password. They don't work. I type my name and password in exactly like I did every time I logged in before, and nothing happens, it just gives me a blank username box again.
View 4 Replies
View Related
Apr 30, 2011
After upgrading to Ubuntu 11.04 I only get the text mode login. I have a ATI Radeon HD 3600 card and before upgrade I used the propiertary driver (to make the dual screen mode work).I have tried to download the driver again from ATI and installed that but it does not helped.I have put the Xorg.0.log and some other outputs in http://83.251.70.81/X/
View 3 Replies
View Related
May 6, 2011
I just loaded the new upgrade and now the top bar does not appear.
If the cursor moves over the top bar area the menus drop dow, but every else is black-- power button, wireless icon,... all gone.
How do I get these back?
View 4 Replies
View Related
May 17, 2011
I upgraded from 10.10 to 11.04 via the update manager and somehow in the middle of it, the package failed. And so I carried on using the ubuntu, rebooted and now the disk is not ready and cannot mount. Press S to skip or M for manual recovery. Skip does nothing, only can use manual recovery.I tried everything from the ubuntu forums & google from other people who had the same problem. The problem is my root terminal on manual recovery doesn't have networking.Only can use liveCD which I still can't connect to the internet because I use wlan0 from ndiswrapper.
I am a dual booter of Ubuntu 10.10 on one partition and Windows XP on other. I edited the grub to boot those. One HDD is partitioned into 2 drives so one partition holds XP and the other partition is a "translator" that holds files which both ubuntu and XP can access. (don't ask me why, I cleaned the dust off my PC recently after 3 years )My outputs are:
/boot/grub/menu.lst
Code:
title LINUX - Ubuntu 10.10 - kernel 2.6.35-28-generic
root (hd1,0)
kernel /boot/vmlinuz-2.6.35-28-generic root=UUID=85de06c5-cf3e-46b8-8c14-2c217be8dd9d ro vga=0x317 splash
initrd /boot/initrd.img-2.6.35-28-generic[code]....
- I commented the UUIDs, that doesn't work.
- I tried remounting it, no effect.
- I fsck'ed it, no effect.
- I booted using LiveCD but cannot connect to the internet due to wireless.
- Cannot apt-get update & upgrade due to no internet.
That's all I remember cos I basically tried alot different ways and cannot get it to boot.I am thinking of formatting the mess and start all over again but I don't really want to do that because it is a good system, just that the grub file and fstab is kinda cluttered.
View 7 Replies
View Related
Sep 1, 2011
I recently upgraded my vps from 8.04 to 11.04.
When I run apt-get upgrade I get
Code:
If I try apt-get install -f I get
Code:
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
Suggested packages:
The following NEW packages will be installed:
View 1 Replies
View Related
Jan 12, 2010
I've got a toshiba A135 series. I installed 9.10 from a live cd, and the installation process went fine.
When I rebooted the computer, it loaded up giving me the option to select one of the following:
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)
Memory text (memtest86+)
Memory test (memtest86+, serial console 115200)
I chose the first one, hit enter and the computer went to a black screen with the cursor up in the top left corner blinking away. Then nothing. I've read that this distribution is giving folks a lot of trouble. Has anyone had this same thing happen to them after a clean install?
View 1 Replies
View Related
Jan 13, 2010
I need to register some dll files in ubuntu. I used following command n it gives an error,
HTML Code:
Z:home haraka>regsvr32 "C:Program FilesUnion Assurance HRMAlerts.dll"
err:module:import_dll Library MSVBVM60.DLL (which is needed by L"C:\Program Files\Union Assurance HRM\Alerts.dll") not found
Failed to load DLL C:Program FilesUnion Assurance HRMAlerts.dll
View 3 Replies
View Related
Feb 2, 2010
I recently upgraded to the 9.10 version of Ubuntu. Now my screen freezes from time to time and I cannot click on anything. I must do a hard reboot by holding the power button of the PC. Is there a fix for this? Is there a way for me to go back to 9.4?
View 3 Replies
View Related
