Just upgraded from Ubuntu Server 9.04 to 10.04 and in the process my hostname was lost.
Code:
Although configure file looks fine:
Code:
The following lines are desirable for IPv6 capable hosts
Have set hostname with:
Code:
But doing it this way you cant use '_' ..
I upgraded my Edubuntu 10.10 LTSP server to 11.04 and I've lost my network. The server boots fine but none of the workstations connect. They start the boot process but hang-up as it starts to load the GUI.The screen on-which the computers hang displays Ubuntu 10.10.Do I have to manually update the LTSP image?
View 1 Replies View RelatedIm using bind9 as DNS server on my LAN, but it does not seem to translate its own hostname correctly for some reason. Other hosts is translated correctly, the problem only seems to apply to the DNS host itself. if i "ping <server_hostname>" from the server, it translates correctly. But if i "ping <server_hostname>" from the client it only says "unknown host" The client has the correct DNS-server assigned. How can i start troubleshooting this?
[Code]...
I just loaded the new upgrade and now the top bar does not appear.
If the cursor moves over the top bar area the menus drop dow, but every else is black-- power button, wireless icon,... all gone.
How do I get these back?
I recently upgraded to 10.04 Lucid a while ago. I don't know if anyone else needs this feature but I use it a lot.
MOUSE-OVER RHYTHMBOX PLAYER ICON FUNCTIONALITIES
In previous releases, one of my favorites about RhythmBox was the fact that if you need to control things such as volume or check presently playing track, you can do so just by a mouse-over action and a scroll mouse over the Top-panel tray icon. It's all gone. Need to say the new click-on is good too but it's without the mouse scroll or Mouse-Over INFO
How can I re-enable it please? Why should I click on RhythmBox player each time just to control volume
BUILT-IN MIC CEASED WORKING
Since upgrading to 10.04, only external mics work
I am a linux noob and have been searching for a couple months to a fix for my problem but now I just need I have two hard drives. One with vista and the other with ubuntu, storage space, and some other partition. I was dual booting windows and ubuntu jaunty jackalope then one day I decided it would be fun to upgrade to 10.04 so I did. When I tried loading windows from grub it just showed a blinking cursor forever. And while attempting to fix the problem by adding windows to the grub menu.lst file it dissapeared from the grub options.
[Code]...
-I upgraded my Ubuntu install and the system boots except it ignores my two data drives. I get a prompt to continue waiting, skip or manually recover. If I skip I boot into Ubuntu. The fstab entries for the data drives are:
[Code]....
I booted with a knoppix cd and both drives are found and contain data. What steps can I take to remount these drives and recover the data?
I was running 8.04 and my internet (Comcast) comes via a Motorola SB5100 cable modem then into a Netgear router then into my Dell. When I upgraded to 10.04 yesterday, I lost the wired connection. The wireless connection still works fine, but I have not been able to get a wired connection. Also, most online solutions reference the Network Manager, which is nowhere to be found.
Anyone have any solutions? I would be willing to revert to 8.04 if needed, as that worked fine, and obviously I quite regret the upgrade!
Ubuntu and other Linux distros have a limited useful life, for example Ubuntu only supports its current release until April 2012. If I decide to upgrade at that time, are my customizations lost, also add on software lost e.g. Codeweavers Crossover Office, and software running inside Crossover, etc.?
View 6 Replies View RelatedI keep getting this message as the first thing I see when I boot up. Afterwards, it displays the ubuntu logo and dots under it and then the screen blacks out, but the display lights act like its OK (wireless ETC). should I use a boot CD or something? The hard drive is fine and this happened after the computer blacked out during updates. i scanned the hard drive and its OK, according to the little scan thing you can do before booting up. I have a Compaq Presario V200. For specs, thats all I know.
View 1 Replies View RelatedJust upgraded to 9.10 and lost the ability to use my scanner with VueScan. No help at their site or the Avasys Corp. site, where downloads of the "driver" refuse to load due to various conflicts. Has anyone gotten VueScan to work with 9.10 and how on earth did you do it? (Scanner is an Epson Perfection V500 Photo.)
View 7 Replies View RelatedI upgraded to ubuntustudio last night while I was sleeping, and when I woke up this morning and restarted the laptop the sleek desktop environment was gone. I actually liked that layout. I can't find a way in the settings to re-enable it. en uninstalled the ubuntustudio suite and restarted the system. Nothing changed. Do I have to reinstall 11.04?I really love the new layout..as a side note, I had a small bug with it when I tried to enable the compiz effects. when I enabled the rotating cube and restarted the system the menus were gone and it was only a blank desktop
View 2 Replies View RelatedI upgraded to 2.6.35-30.56 last night and now my system's a little flaky. Everything seems to be running ever-so-slightly slower and fullscreen flash is now choppy. The weird thing is the Grub menu upon bootup only shows the latest kernel, but not the previous kernels. Doing an "ls" of the /boot folder only shows this newest kernel. I'd like to revert back to the previous kernel but don't know how.
View 2 Replies View RelatedI have upgraded my acer 2930 and I have lost my audio output
View 5 Replies View Relatedi had a dual boot with xp and lucid lynx, then upgraded the xp to win7. windows commonly overwrites grub with it's bootloader. and so it did. now i can't access my lucid OS. i need to get grub back (i need to get lucid back).
here's my fdisk:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
Lost my desktop effects when I upgraded to Ubuntu 10.04LTS
from 09.10.
Card is nVidia G96 [GeForce GT 120]
Currently have access to a VPS where we are running a small game server on ubuntu - the problem is that it is a multi-user environment, so when one person restarts the server process, all files it creates are owned by that users name and group. I have created a group called 'game' and added both users to it, but I need to know how to make all files in the game server's directory to be r/w/x for the group 'game'. Currently, I have a script that chowns and chmods all files recursively on startup, but I'd prefer not having to do this.
View 4 Replies View RelatedI run Debian with Gnome on a beat up workhorse ThinkPad. I upgraded to Jessie last week with just one issue. Before the upgrade, I could plug in a USB drive (I use a couple of WD MyPassports most often) and they would mount, read, and write without a hitch.
Since the upgrade, when I plug in a USB drive, the file manager (3.14.1) sees the drive, but when I click on the drive to access/mount it, I receive a dialog box reading: Oops! Something went wrong. Unhandled error message: Error when getting information for file '/media/user/MyPassport1': Input/output error.
If I hit the little “eject” button in the file manager, then mount the drive as root from a command prompt [e.g., mount -t ntfs-3g /dev/sdb1 /media/external] I can run a directory of the drive, but ls -l /media/external fails. From the command prompt I am unable to perform reads or writes to the drive.
Rebooting into recovery mode (i.e., without Gnome), I get the same behavior with CLI messages reporting I/O errors with the drive. I can run a directory, but ls -l, reads, and writes fail.
This behavior is the same on all three USB ports. It is not limited to these MyPassport devices.
The drives work flawlessly on another headless machine upgraded to Jessie the same day. And on another still running Wheezy.
If I boot the ThinkPad from a live CD (Mint 14, I believe) the USB drives mount, read, and write fine.
My BIOS is up to date, 1.52.
lspci -v says this about USB ports:
Code: Select all00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 1880 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
[Code] .....
I am in the process of setting up a couple of virtual servers in a cloud environment. I am currently working on my application server (Server 1) and am stuck on the creation of my ruleset for this server.
I need to allow SSH, FTP, HTTP, HTTPS, and PING on this server. This server will also need to be able to talk with a couple of database servers as well as a memcache server (all internally within my cloud environment)
I have been reading on iptables, since I have never messed with them before, and have come up with the ruleset I will paste below. I have taken other steps to secure my server...changing ssh port, not allowing root to login via ssh without logging in as a user, turning off unnecessary daemons, editing my hosts allow/deny files, just to name a few.
I am a newbie to iptables, so I would love a bit of helpful advice, criticism, and even a good explanation why I should add or remove or edit something. I really want to know the how AND the why!
[Code]...
I have installed a ubuntu 9.10 server to use mostly as a fileserver. When I installed the server I set it up as DHCP and later on I have changed the /etc/network/interfaces file, the /etc/hosts file and the /etc/hostname file. I have the ip 192.168.1.100 set on the server and I can ping and SSH this address. But I can not ping my server by it's hostname enighet. I am setting up a NFS server and I would like to use my servers hostname when I do this. Why can I not ping my server by it's hostname? These are the 3 files I have changed...
Code:
johan@enighet:~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
[Code]....
I've looked at several tutorials and since i'm a newb I can't figure them out. I'm trying to set my hostname on my LAMP 10.04. What files do I need to configure? (all IP's below are fake)
Here are the first lines from /etc/apache2/sites-available/default
Code:
<VirtualHost 111.111.111.111:80>
ServerAdmin webmaster@localhost
/etc/apache2/ports.conf has these lines after the comments
[Code]....
I am trying to set up a web server, i have put in a hostname.In terminal command: hostname shows 'promisedland, but hostname -F gives me name or service not known.How do I associate hostname properly, I have registered a hostname through DynDNS.I can access the page in my browser so I know it is there, I see the blank "u made it page".I just want to host a web server w/ a directory to my shared files (movies, music etc) that are on my server.
View 2 Replies View RelatedI have two computers.
Computer A = windows 7.
Computer B = Ubuntu Server 9.10
Computer B automatically receives an IP address from my router.
I can ping computer B from computer A using the IP address. I cannot ping computer B from computer A using its hostname.
My router did not show a hostname under it's active clients table. After some searching I found a threat where somebody suggested modifying /etc/dhcp3/dhclient.conf and adding 'send hostname "blahblah"' This allowed me to see the hostname in my router but I still cannot resolve it from my windows box.
I have a problem with server bcs of the machine name. I'm wondering how to change the server name to it's IP. bcs now it has name "chrochne". I've found hostname in /etc/host and in /etc/hostname. But I'm afraid of changing it in this files. I'm using webmin and virtualmin to admin the server so can I change the name somewhere in the GUI?
View 9 Replies View RelatedI saw in the tutorial "The Perfect Ubuntu 11.04 Server ISPConfig3" that it is possible to turn the internal ip into a hostname.
Example: 192.168.1.170 -> myserver.example.com
Example: 192.168.1.128 -> aserver.inet
However, when I edit my /etc/hosts file and after I echo the name to the /etc/hostname file, it still doesn't work. I am using Ubuntu Server 11.04 (Natty Narwal)
- ChosenOreo
I'm running Ubuntu 11.04 x64
I upgraded to Netatalk 2.2 and I've hit a wall.
I'm authenticating netatalk with an external LDAP server but for some reason pam is confused.
Here's my output when I authenticate with the server:
CODE
I went searching for system-auth but it doesn't exist.
I just built out an Ubuntu Server 10.04.
My problem is setting the hostname. I cloned the machine, then normally on the clone, I would change the /etc/hostname and /etc/hosts file.
However, when I do this, upon restart, I get the message, "init hostname main process (some process number) terminated with status 1"Then, when the machine finally boots, the hostname is set to (none). Literally has braces like: user@(none):
I've tried: sudo hostname machine_name but it says can't resolve hostname (none).
I've Google'd around a lot but can't get it. It may have something to do with 10.04? I have been using 9.04, 9.10 with no problems.
eric@(none):~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
code....
I'm facing bit of a conundrum with my new server. It is essentially a distributed-virtual Plesk Virtuoso container with a rather simple LAMP setup (PHP5 etc) and virtual hosting. Running 10.04 LTS.
The issue is that on each reboot, the /etc/hosts and /etc/hostname files are reset with their original configs causing the virtual hosting to break, i.e. rather than hosting the vhosts correctly, it essentially routes all traffic to /var/www, or essentially 000-default ~ this beats the whole point of vhosting in the first place!
Is there any way to get around them being overwritten at boot? A very crude workaround would be to set a script to load at boot via init.d and have it rewrite both files to their correct configs - of course, I have no idea as to the point during boot at which they get replaced.
I have a ubuntu server 10.04 that will not boot. I saysno ip address specified and hostname not found refer to mount cifs blah blah blahmountall mount /directory/share [863] terminate with status 32I know its because I had a share mounted at boot but the server cannot mount the share for some reason. is there a way around this so I can boot the machine.I can ping the server. I just cant ssh to it. I need to get to a prompt some how so I can remove the mount from fstab.
View 1 Replies View RelatedI have a network of 2 WinXP machines and one linux box. I have fiddled around with the settings as you do when learning. The network is working. The network neighbourhood on the WinXP machines recognise the linux box and vice versa, (the linux Places|Network recognises the 2 WinXP). I can Ping the linux box using its hostname from a WinXp. But I cannot do the reverse. I get an 'unknown host' response. I can ping the linux to itself using its hostname.
View 7 Replies View Related