Ubuntu Installation :: Upgraded To 10.04 LTS, Now Won't Boot?
Feb 18, 2011
So I was on 8.04, and I decided to hit the upgrade button on the gui to upgrade to 10.04. Well the upgrade went fine and all...until I rebooted. Now I get this
Starting up .
mount: mounting none on /dev failed: No such device
udevd[984]: error getting socket: Invalid argument
error initializing netlink socket
udevd[984]: error initializing netlink socket
[Code]...
I found some other posts and tried adding the rootdelay=35 and acpi=off but those did not fix it. This is a virtual machine running on VMWare ESXi 4.1.
View 9 Replies
ADVERTISEMENT
Apr 29, 2010
I've looked in the grub.cfg file, and it has :
Code:
#
### BEGIN /etc/grub.d/30_os-prober ###
[code]....
View 3 Replies
View Related
May 27, 2010
I upgraded 9.10 to 10.04 and now it won't boot. The way 9.10 used to boot was after turning on the computer it would go through the bios screen and then a screen would come up and list both operating systems, Windows Xp and Ubuntu. XP would be highlighted and would normally boot if I did not change the highlighted area. If I changed the highlighted area to Ubuntu it would boot into Ubuntu 9.10. Now after doing the upgrade, it gets to the same screen with the two operating systems listed.
When I change the highlighted to Ubuntu an error message is briefly displayed and then it goes back to the screen that lists both operating systems. I think the error message says something like couldn't find Ubuntu, or something similiar to that. Windows XP runs fine when I highlight Windows XP in that first screen, but I want to be able to run Ubuntu. I have Ubuntu on a secondary drive, but shouldn't it have rewritten the upgraded files on that same drive that had 9.10 on it?
View 9 Replies
View Related
Jun 24, 2010
i just upgraded from 9.10 to 10.04 and now i cant get win xp to boot. win xp will show up on the grub list but when i select it all i get is a blank screen with a cursor flashing in the top left corner. i dunno whats happend, i have never had many problems with dual boot.
View 6 Replies
View Related
May 17, 2011
I upgraded from 10.10 to 11.04 via the update manager and somehow in the middle of it, the package failed. And so I carried on using the ubuntu, rebooted and now the disk is not ready and cannot mount. Press S to skip or M for manual recovery. Skip does nothing, only can use manual recovery.I tried everything from the ubuntu forums & google from other people who had the same problem. The problem is my root terminal on manual recovery doesn't have networking.Only can use liveCD which I still can't connect to the internet because I use wlan0 from ndiswrapper.
I am a dual booter of Ubuntu 10.10 on one partition and Windows XP on other. I edited the grub to boot those. One HDD is partitioned into 2 drives so one partition holds XP and the other partition is a "translator" that holds files which both ubuntu and XP can access. (don't ask me why, I cleaned the dust off my PC recently after 3 years )My outputs are:
/boot/grub/menu.lst
Code:
title LINUX - Ubuntu 10.10 - kernel 2.6.35-28-generic
root (hd1,0)
kernel /boot/vmlinuz-2.6.35-28-generic root=UUID=85de06c5-cf3e-46b8-8c14-2c217be8dd9d ro vga=0x317 splash
initrd /boot/initrd.img-2.6.35-28-generic[code]....
- I commented the UUIDs, that doesn't work.
- I tried remounting it, no effect.
- I fsck'ed it, no effect.
- I booted using LiveCD but cannot connect to the internet due to wireless.
- Cannot apt-get update & upgrade due to no internet.
That's all I remember cos I basically tried alot different ways and cannot get it to boot.I am thinking of formatting the mess and start all over again but I don't really want to do that because it is a good system, just that the grub file and fstab is kinda cluttered.
View 7 Replies
View Related
Feb 5, 2010
This the second time it has happened after the security upgrade to kernel 2.6.31-19 with a clean shut down it goes into the grub menu and will not boot.
View 9 Replies
View Related
Oct 10, 2010
I had upgraded Ubuntu 10.04 (which had worked fine) to 10.10 and now if I try to boot normally, I see the "Ubuntu 10.10" text and startup meter... thing for only about a second, then it becomes a pure purple screen and all disk activity stops. I can still boot through Recovery mode with a failsafe X session and Windows (my other OS) can still boot. Along with that my desktop wallpaper is completely white. My PC is an Acer Aspire 4530-6823 with an AMD Athlon 64 X2 QL-62 dual-core processor clocked at 2GHz, a NVIDIA GeForce 9100M G and has a dual-boot between Windows 7 and Ubuntu 10.10 set up
View 5 Replies
View Related
Jan 16, 2010
I have both 9.04 & 9.10 installed & running with a dual-boot...now I want to remove 9.04 and go to a single-boot of 9.10...how do I do this? I want to reclaim my disk space from the old OS as well...to make matters alittle messier, 9.10 was installed first...then after encountering trouble I installed 9.04 to see if it solved my problem...when I figured out how to solve problem it worked same on both releases...so I now want to remove 9.04 and stay with 9.10...but I don't want the uninstall of 9.04 to impact the 9.10 install...I would also like to adjust the partitions so that I can use all of the disk for 9.10 (including that which was used for 9.04 and it's swap file)..
View 2 Replies
View Related
May 9, 2010
For some reason after upgrading from 9.10 to 10.4 I now at boot get the password box for unlocking the keyring. It does not seem to make any difference to the computer if I put the correct password in, junk or just cancel. Everything still works as it did before. So how do I turn it off, it's not doing anything from what I can see.
View 4 Replies
View Related
May 20, 2010
I upgraded to 10.04 but now i can't boot windows 7 from the grub. what can i do?
View 9 Replies
View Related
Aug 28, 2010
I just upgraded my server, and now I am stuck at "Kernel panic- not synching: VFS: Unable to mount root fs on unknown-block(0,0)" I have read other suggestions about booting to previous kernels to reinstall latest kernel, but that doesn't work since I can't boot to any kernel. How can I fix this with the restore cd or from grub2 command line. Reinstalling is not an option as I have lots of configurations that I don't want to lose.
View 5 Replies
View Related
May 24, 2011
I updated to new ubuntu with the selection to leave the previous version untouched... At boot I try to log into previous version and all I get is 11.04... I dont like the new Ubuntu and I want to uninstall but how?
View 3 Replies
View Related
Dec 4, 2015
I had Debian 7.9 up and running like a charm until yesterday. Today I did the upgrade to 8.2, now boot hangs. I see 3 boot entries for the new kernel now -
Debian GNU/Linux, with Linux 3.16.0-4-amd64
Debian GNU/Linux, with Linux 3.16.0-4-amd64 (sysvinit)
Debian GNU/Linux, with Linux 3.16.0-4-amd64 (recovery mode)
The latter 2 entries have no problem booting up. So do the previous kernel(3.2.0.4) entries. Only the first one hangs, for which I see these 6 lines on the console:
[ 0.214704] pnp 00:04: can't evaluate _CRS: 12298
Loading, please wait...
fsck from util-linux 2.25.2
/dev/mapper/myhost-root: clean, 198627/61000000 files, 2160052/24412 blocks
[ 0.047141] kvm: disabled by bios
[ 0.000985] kvm: disabled by bios
How can I make it boot up like others?
View 6 Replies
View Related
Oct 11, 2010
Installed Ubuntu 10.04 a week ago or so (using wubi.)Tried to upgrade to 10.10 from within Ubuntu using the update manager.Now the PC will only boot to grub rescue.When booting, this is what i get:error: no such device: cd200414-0606-4d7d-8c08-004e9b5dc92d.grub rescue>Three commands work: ls, set and insmod.The ls command only yields: (hd0)(no partitions like (hd0,1), (hd0,5), etc.)
View 4 Replies
View Related
Nov 3, 2010
I upgraded from Ubuntu Desktop 10.04 to Ubuntu Studio 10.04 and running a dual boot system with Windows. On the grub screen there are four listings now for Ubuntu. Two recover modes and two ubuntu modes. Is this normal? Going to reboot and see if I can get a picture of it.
View 3 Replies
View Related
May 14, 2010
i upgraded ubuntu from 9.10 (pretty sure it was .10...) and now my machine goes through the bios and i get a black screen w/a blinking cursor instead a boot choice to ubuntu or windows 7. system worked fine prior to upgrade... reading lots of things it appears i likely have a problem with grub2 (soemone correct me if i'm off base?) so i've been trying to restore and reinstall grub 2 (using this and silmilar threads: [URL]), got frustrated and reinstalled 10.04 over the upgrade install. same blinking cursor... i did the following from this thread: [URL]
[Code]...
i've gotten that response from trying to reinstall/repair grub 2 also. i'm near wit's end and am near completely wiping hdd and reloadng w7 OS.
View 3 Replies
View Related
Apr 27, 2011
When "sudo apt-get upgrade" said packages have been kept back, used "sudo aptitude dist-upgrade."Obtained grub prompt on restart; purged and reinstalled grub using the chroot method. This has become customarily necessary after certain system-wide changes (see my other threads) but I still don't know why. But it's not the main subject of this thread.On restart obtained message saying kernel and fallback failed to load. Restarted and used shift to select 2.6.35-25 (3rd on the list) to load.I inferred that 2.6.35-28 is at fault since the recent upgrade mentioned kernel generic.
View 2 Replies
View Related
Jan 8, 2011
I upgraded a PC from 10.04.1 to 10.10 and it will not boot into the new kernel. Because the system started as Ubuntu 7.10, it is using Grub 1.
It gets to the point where it displays "Starting up..." then displays a flashing cursor at the upper left of the screen, it does nothing further.
Yet it will boot into the previous kernel from the 10.04.1 installation, but X will crash if I login using the XFCE desktop, yet it will log into LXDE without a problem.
Is this a known issue (not booting up with new kernel)?
The CPU is an AMD Athlon 32-bit which does have CMOV (per cat /proc/cpuinfo). I have also manually run various apt-get commands to upgrade/update everything, no change resulted.
View 3 Replies
View Related
Jul 10, 2010
One hour ago I had a nice computer running Ubuntu 9.10 and I ran the update manager and clicked on update to 10.04 LTS distrubution. Now the computer wont boot! I get this message:
init: plymouth main process (3083) killed by SEGV signal
init: plymouth-splash main process (477) terminated with status 2
... and after that nothing happens unless I hit Ctrl-alt-delete. the rest of my family is lining up for a chance to punch me. Yes, I have googled around and I see that I'm not alone about this but how the heck can I get the computer working again? I have a rescue partition so I can boot up another installation on the same machine
View 6 Replies
View Related
Apr 29, 2010
I upgraded today to 10.04, everything went fine and was working fine. I went to boot back into Vista via grub2. I immediatly get the PXE-E61 Media Test Failure, check cable PXE-M0F Exiting PXE ROM
I first checked my boot order, and lan is very last. Also, through Ubuntu I can view everything on the hard drive so it is not that. I think it may have to do with during the update process, it asked about grub2 update preferences and asked about different drives and such (I am not exactly sure what it was called). I didn't select all of the choices, and I believe this may be the cause, as this was the only thing I had control of that I could have screwed up.
View 9 Replies
View Related
Apr 8, 2011
I upgraded from Maverick to the Natty beta a little while ago. It all worked fine for a couple of weeks. Then, this morning, I was unable to boot. I got to GRUB, picked the first option and it went to the Ubuntu 11.04 with the dots, then returned this:
Code:
fsck from util-linux-ng 2.17.2
/dev/sdb2: clean, 330122/2170880 files, 7302496/8683520 blocks
init: udevtrigger main process (367) terminated with status 1
init: udevtrigger post-stop process (372) terminated with status 1
init: udevmonitor main process (366) killed by TERM signal
[Code].....
View 9 Replies
View Related
May 4, 2010
I have recently upgraded from Ubuntu 9.10 to 10.04.In 9.10 i could change the visual settings no problem and it would save. However now that i have upgraded i can change the visual settings but everytime i reload the computer the settings change back to none
View 2 Replies
View Related
May 8, 2011
i had a dual boot with xp and lucid lynx, then upgraded the xp to win7. windows commonly overwrites grub with it's bootloader. and so it did. now i can't access my lucid OS. i need to get grub back (i need to get lucid back).
here's my fdisk:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
View 5 Replies
View Related
Mar 7, 2011
I apologize for this being somewhat vague but it happened several months ago and I don't currently have access to the laptop. But here goes anyway:Perfectly working dual-boot system with XP and Ubuntu 8.04. I also think I had installed a different boot loader (or maybe just a GRUB editor?). This was several years ago. I upgraded Ubuntu to 10.04 and I remember it asking me if I wanted to overwrite probably menu.lst. I said no when I should have said yes and now XP still loads fine but neither version of Ubuntu will load at all. I wish I had access to the machine so I could say what the error message is, but I don't and I forget.So I expect that menu.lst is just pointing to the wrong place but I'm not sure how to fix it. Can I boot from a live CD and edit menu.lst? Just thought about that.No biggie but I cannot screw up the XP aspect since that's major drama.
View 2 Replies
View Related
Aug 4, 2011
Everything has been running well FC 14 dual boot with a Vista partition. I haven't touched the Windows partition since FC 10.Now I upgraded to Windows 7 because I am having networking issues at school and want windows while I take time to address them( I am a novice) So I upgraded the Vista and now it only boots into windows. I know I only installed on the windows partition. How do I get my old Fedora boot screen back that lets me choose
View 7 Replies
View Related
Dec 16, 2010
I run my linux server on the Fedora 11 x86_64 flavour of linux. It did have 1GB of DDR SDRAM PC2700 (Crucial) in the first DIMM slot. It worked fine, however i felt the need to add more RAM to the server. So I purchased 2Gb from Crucial 2 * 1Gb memory stick of DDR SDRAM PC2700 333 CL2.5. However when these are used the machine goes through grub begins booting and then hangs. Sometimes it goes through to the login screen where it hangs, othertimes it hangs after logging in. I have performed a memory test and the results come back fine. However if I just use a single stick of memory the server boots fine (Either stick of memory works).The Machhine is dual boot and my XP professional partition always boots fine
View 1 Replies
View Related
May 8, 2010
I upgraded Kubuntu to 10.04 LTS. At login screen I enter my password to login once that harddrive icon comes up it immediatly gives me a black screen then goes back to the login screen.
ive tried deleting everything in /tmp/. i did a sudo dpkg --reconfigure -a, Gnome works perfectly well.
**Just noticed that on grub screen it displays Ubuntu**
View 1 Replies
View Related
May 9, 2011
I got wireless printing working on my mom's computer... Then when I upgraded the laptop to 11.04 it wouldn't boot properly. It shows the Ubuntu splash and then switches to a console where I can see services starting and stopping. It freezes when it's going through this section of startup. I rebooted and started the machine in recovery mode, then selected low-graphics from the list. It works in low-graphics mode in Ubuntu Classic (my mom doesn't want Unity so I set Classic as the default)
View 5 Replies
View Related
Oct 21, 2010
I upgraded a week ago to ubuntu 10.10 (amd64). I was unable to boot in 2.6.35-22 so I have been using 2.6.32-25. I tried again last night after installing updates to 2.6.35-22. Still no luck.I gave up since this was much like what happened a week ago and I couldn't find any solutions then. (I ran memtest then.)
View 3 Replies
View Related
Nov 12, 2010
The software manager has been nagging me to upgrade from 9.10 to 10.04 for some time now. I finally gave in and clicked on Upgrade. After the upgrade completed, my computer won't start. It just flashes Ubuntu for a split second and goes to a black screen. I happen to have the 10.04 CD from Canonical, and I tried that, and it won't launch the installer either; just a logo and a black screen. Since I can't even get to the terminal to diagnose and fix whatever's wrong, I'm installing 9.10 from the CD that I ordered from Canonical a long time ago. I went through all the graphical options just like the first time I installed 9.10, and it's in the process of installing right now.
I don't really have time to futz with it because I need my laptop for when I go and visit my mum for Thanksgiving. Maybe I'll try after the holidays if I can get some feedback on what might have gone wrong with 10.04.
View 9 Replies
View Related
