I am running Ubuntu 10.10 right now. I'm going to upgrade to 11.04, but I want to upgrade to Kubuntu 11.04. Can I safely upgrade from Ubuntu 10.10 to Kubuntu 11.04 using my Kubuntu live cd?
View 6 RepliesI want to install Kde desktop on ubuntu 9.04, is there any way to do it from my kubuntu 9.04 live cd. Another question is that i recently find that many useful packages and many dependencies for it are available in a disk of my 64 studio. I am also able to install them just by clicking on that .deb files. But i find it difficult when i need to install dependencies since it take a long time to search and find it though they are available in the same disk. Is there any way to install it easily.I mean to install the packages and there dependencies from cd using some simple terminal command or something.
View 1 Replies View RelatedI'm trying to install kubuntu and it keeps going in to the live os. From there I know it can be installed but its not getting far enough. My guess is do to my vga card. I'd just like to install from outside the kernal like normal, can that be done?
View 4 Replies View RelatedI'm trying to run Ubuntu on an old laptop, a Gateway M520S-H2. The Kubuntu 10.10 live CD runs fine. Right away the menu comes up allowing you to check the CD, try it, or install it, and so on. But the Ubuntu 10.04 live CD, it shows "Ubuntu" on the screen in a logo-ish way for several minutes, then the "Ubuntu" deteriorates in an unhealthy looking way, then the screen just sits there blank forever.
So then I tried an Ubuntu live DVD. Same things. I checked both the CD and DVD for errors, the DVD with Ubuntu's checker and the CD after I burned it. Also, both disc work on another computer.
Does anyone have any idea why Ubuntu live CD doesn't work on this system while Kubuntu does? Must it be something with the GUI? DO you think I'd have more luck with Ubuntu 10.10? (worth a try I guess...)
I am booting from a USB stick live CD image of Kubuntu 10.04 Beta. When I run the installer, and choose the "manual select partitons" option, it lists only my full hardisk, whereas I have atleast 5 partitions on it, and none are shown. Could anybody help me with this? I want to install on one of the partitions and leave the rest intact. I am dual-booting BTW.
View 4 Replies View Relatedis there any way to upgrade my install of Ubuntu 9.10 to Kubuntu 9.10 and keep my files and settings?
View 3 Replies View RelatedI am being told I need to upgrade from 8.04 to at least 9.10 on another linux forum. I like KDE 3.5 and I CANNOT STAND KDE 4 I tried it like 3 or 4 times and I cant stand it... I tried that TRITON or whatever it is with 10.04 with kde 3 but it kept messing up like I would go to install updates it would say 83 updates but it only installed 7 anyways I said no to that and went back to 8.04 and I got the /! icon blaring at me saying hey idiot upgrade to 9.10. I mean I am doing fine on 8.04 I mean I got the latest thunderbird and updated pidgin to 2.7 I mean everything is up to date so its like why give it up? I am scared to go to 9.10 cause 3.5 will be gone and I will be stuck with KDE 4.0 ( the 1st version ) and I dont want that I want 3.5.
View 2 Replies View RelatedIs Kubuntu 10.10 stable?? At the moment i'm using Kubuntu 10.04, should i upgrade to Kubuntu 10.10(Is it stable??)
View 4 Replies View RelatedI want to make a DVD with Ubuntu, Kubuntu, and Xubuntu so i can choose one to start a live session when booting from the disc. I'd like to introduce linux to friends and having a few variations might make it easier to transition.
View 3 Replies View RelatedI have an Proliant DL380 that I use as a home server/router that I attempted to upgrade to Lucid. The gui upgrader first attempted to upgrade to 9.10 (as expected.)
I believe grub was incorrectly installed/updated. Not quite sure if grub2 was installed. The machine boots to a maintenance prompt. The partitions seem to be mounted read-only because of errors. The grub menu only shows an 8.04 kernel choice, even though all 9.10 packages were downloaded and, I believe, installed. The gui upgrader did fail with an error right before the "cleaning-up" stage. After "messing around" with it, the upgrader said I needed to reboot. So, I did and my problems started.
I tried booting the 9.10 Kubuntu cdrom and also a Knoppix 6 CD, but neither one would boot properly (gave me a BusyBox prompt.) So, I guess they don't like the Smart Array 6.
what I could try to fix and upgrade to 10.04? I really don't want to lose my configuration files (dhcp, firestarter rules, apache, squirrelmail, NFS, etc.)
Running Landmarq Intel Atom DC330 Desktop I have just attempted to upgrade my desktop machine from Kubuntu 10.04 to Kubuntu 10.10. I used KpackageKit to do the upgrade which proceeded smoothly until the install packages phase, which seemed to complete and then repeat. I don't know the detail of what happened as I was out of the room.
The repeat almost completed, but then I got a set of error messages, which basically told me that KpackageKit was unable to install the upgraded packages. I closed KpackageKit, and closed the machine and tried a reboot. This time, I got as far as the splash screen, but although the cursor flashes, I can't type anything in the password box. In addition, the mouse pointer won't move. Using a different wireless mouse works, but I still can't type in a password.
However, the command ctrl+alt+sysrq+RSEIUB works, so the machine is accepting some keyboard input. I also know from using a live disc that my home directory is intact. I would like to revert to my 10.04 installation, and re-try an upgrade to 10.11 afterwards.
I have a problem, because installation of ubuntu 11.04 will fail if I try to.
I have also Kubuntu and Xubuntu installed, which I regret a lot because I cannot uninstall them as well...
The problem is that I have installed a one-time-activation proprietary software so a fresh install is no option.
The error when upgrading is, that "xubuntu-desktop" cannot be marked for upgrade!
I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
I'd like to upgrade the Ubuntu 9.04 on a system to the 10.04 and I have the 10.04 LiveCD. Usually I would get a new HDD and install on that , then move stuff onto the new HDD, but I thought that this time i'd try some other method. I've done the online upgrade once but it took a long time, while connected, and it worried me.
Can I replace the 9.04 with 10.04 without losing anything (although perhaps requiring an Update Manager run to refresh some apps, Like OO, VLC, etc.)?
My first upgrade attempt to 9.10 ruined my install - there was no return and as 9.10 would not install either, I reinstalled 9.04 and everything was as expected.I decided to wait for 10.04 hoping the issue had been solved - unluckily it has NOT. Neither Live CD 9.10 nor 10.04 work. New Mint does not work either - to closely related to Ubuntu, but Suse live CD does. Played around with findings from different threads - like taking out "quiet splash --" and adding modprob parameter to no avail Prime suspect is HD and HD controller (ATA/PATA) - but I could not nail it.
View 3 Replies View RelatedI was running 10.04 with no problems. Upgraded. I may or may not have lost power before the upgrade was finished. Now my system locks out the keyboard and mouse on the login screen...nocapslock light or anything, but I know it's still running because the clock at the bottom increments once per minute. Booting safemode does not help, it simply hangs at some point on the scrolling black screen instead.I can boot 9.04, which is still installed on another partition, just fine.Is there any way I can boot to a terminal and try running apt-get again, to see if I can fix whatever's wrong?
View 1 Replies View RelatedYesterday my wife was using our laptop and an upgrade manager dialogue box came up. She clicked yes to install upgrades, but at some point during this process the machine froze. She restarted, and I haven't been able to successfully boot since then. the final screen when trying to boot from the hard drive reads:
Killed
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init=bootarg.
[Code]...
I'm slowly getting the hang of Ubuntu. By now I know enough that a Live CD can fix most problems. So that's where I went after doing several searches about the error messages that were appearing. The menu screen works, but I can't get it to boot into the "Try ubuntu" mode. I tried changing the boot parameters to no avail. As the boot tries to load I can see a line by line report of errors- some are I/O errors and are in white, but many were in red, which seems bad from my mostly ignorant perspective. I saw lots of SQUASHFS errors among other things. I took a snapshot of the screen that was displayed when the boot failed- it's attached to this post (lots and lots of text to be typed otherwise). The reason I know it failed is because I've tried a half dozen times with the same exact result- once I let it sit for an hour+ just to make sure it was really frozen (a bit optimistic).
Relevant info: Ubuntu is running on a Dell Inspiron 8600 laptop. I think it's version 9, but could be 10. The Live CD I'm using is version 10 burned 1/4/2011. I'd be thrilled to hear any suggestions that folks might have.
Is it possible to update a Live USB so that way when you use it to install to another computer it will install with the most recent updates? I want to install Lucid to my sister's computer, but it doesn't have internet so once its installed it's never getting updated again.
View 9 Replies View RelatedWhen I ran the distribution upgrade from 9.04 in update manager, my screen went blank on reboot and will not recover. Every time I reboot, screen goes blank. I cannot press CTRL-ALT F1 - F6 to gain access to text shells.
I tested booting from the 9.04 live CD and it works fine. So I downloaded the 9.10 live cd on another computer and booted it on the disabled system. Same exact problem on the live CD that I had upon installation: on boot screen goes black and cannot access text shells.
What can I do next to get out of this short of going back to 9.04, which has problems that I do not want to live with?
My ubuntu desktop died yesterday. I rebooted my computer in like 1 month and after grub, the screen is all black and it stays there... forever. So I decided to see if the problem persists or not when I completely upgrade my ubuntu to the latest version. So I downloaded the latest ubuntu iso from the site, burned it, and booted from CD and I see several selections to choose from the menu list. The second one was "Install Ubuntu". What I'm worried about is I don't know whether selecting 'Install Ubuntu' will erase all my previous data, or there will be an option to upgrade Ubuntu without erasing all the data. Is it safe to install from the live disk? Will my data be safe? Is there any way to upgrade my Ubuntu on the HD to the latest Ubuntu from a live disk?
View 3 Replies View RelatedI've recently been trying to install Kubuntu Live onto a pendrive but I'm having some problems. Situation is as so:- Installed Kubuntu 10.10 desktop to 4Gb pendrive via Universal installer 1.8.1.2, with 2Gb allocated persistence.
- Reboot PC, boot from USB into Kubuntu, no problems.
- Configure WiFi connection.
- Reboot.
- Error: NTLDR is missing
I've tried this several times, always with the same result. As soon as I reboot, boot loader appears to be missing. I've read here:[URL].. that there are problems with syslinux and Ubuntu's version and wondered if this was the problem, but plenty of people appear to be running with this setup.
Does anyone have any ideas what may be the problem (and apologies if this has already been asked, I'm struggling to find anything pertinent.) For info, the pendrive I'm using has a small partition that acts as a floppy drive, could this have any influence?
I would like to install to hardrive but screen resolution is too big, the required resolution is 1024x768. when i try to install i cannot see the buttons needed to install. my video card is S3 unichrome with 3D effects. default resolution is 840X600 is there a solution to this problem. all input is welcome.
View 2 Replies View RelatedI see a few guides for Ubuntu on a thumb drive, but will it work for Kubuntu?
View 1 Replies View RelatedI gave Kubuntu (Live CD) a test drive that turned out to be longer than planned... How do I export my Konquerer history?
View 2 Replies View RelatedCouple of days I go I setup VLC using Kubuntu's graphic software manager, and installed the 3 plug-ins, one of which was related to pulse. After doing this sound stopped working in flash videos. I had read, not sure where, that Kubuntu didn't use pulse (which slipped my mind when setting up VLC).
So I make the mistake of removing everything which had pulse in it's name (again, via the graphic software manager). A message popped-up saying that some packages needed to be removed/edited (a LONG list, a big clue that I was doing something stupid I guess). I let it run it's course and after that it won't boot properly.
If I boot it normally it hangs at the Kubuntu screen with the five dots filling endlessly. If I press F1 it's stuck at "checking battery status."
Recovery mode boots, but the recovery option does nothing.
So I was wondering if I could boot into recovery mode and go into the terminal and add a live USB as a repository for apt, and try to salvage the install?
Or should I admit defeat and reinstall?
I changed from Ubuntu to Kubuntu by installing KDE. I'm not sure if I have Ubuntu or Kubuntu now because at login I can choose between both desktops.Anyway, when using Gnome, about once a week it asked for upgrades, and then did this all in the background.
Now with KDE, this doesn't work anymore. At some point there came a screen that was similar to that of Gnome, except if I pressed ok to update and entered my password, it crashed and brought up the KDE crash handler.
I recently upgraded kubuntu from 10.04 to 10.10 Slower boot time First,systen will wait a few seconds on tty1 after a few seconds then jump to the login screen Then wait for a few seconds to type When I waiting the hard drive do not do anything My hardware is lenovo r400 Intel (R) Core (TM) 2 Duo CPU P8700@2.53GHz. RAM 4G Before the upgrade are quite fast boo Become like this after the upgrade
[Code]...
I just ran sudo aptitude update and sudo aptitude safe-upgrade. Now, the machine won't boot. It's a 64-bit system with two disks. Both show up in the bios, and I have tried booting from both. The boot process gets past the motherboard splash screen, then the grub countdown, and then it says:
Boot from (hd0,0) ext3 [lots of numbers and letters]
Starting up...
Then, this error messages appears, very briefly:
Cannot reserve MMIO region
and then the screen just goes dark.
On kubuntu 9.10 my sound was working fine. less than a week ago i upgraded to kubuntu 10.04.After the upgrade the sound did not work at all. i made sure that my volume was turned up and that my volume was not on mute. so far i have gotten no sound on 10.04
View 4 Replies View RelatedSince I've upgraded to Kubuntu 10.10 I've lost my wireless internet. In Windows 7 everything's fine, but in Kubuntu wicd keeps giving a "Unable to get IP address message".
Here's some output:
dmesg | grep wlan0
wlan0: associate with **:**:**:**:**:** (try 1)
wlan0: RX AssocResp from **:**:**:**:**:** (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from **:**:**:**:**:** by local choice (reason=3)
[Code].....