I have a laptop which have vista,fedora 12. Today i have install another operating system ubuntu in my laptop. But when i restart it, it not boot up and show black screen. how to resolve this
View 1 Replies
I have a laptop Toshiba a65 s-1067 and i just installed ubuntu 10.04 but after updating the files that update manager said i restarted the laptop but now its not booting the gui it just shows a black screen with text going then it apears the logo of ubuntu in dark red backround with some text that i cant read cuz it disapears fast.. after this the screen just goes blan (dark red) and presing ctrl + alt F1 or F8 or anything doesnt work generaly no key works.
View 1 Replies View RelatedI'm using OpenSUSE 11.2 64 bit. Sometimes boot fails and I get a black screen. It starts quite normal, but when it tries to start X and KDE, it fails and I only see a black screen. I can't switch to terminal and I can not reboot my computer by pressing "Ctrl + Alt + Del". It doesn't even shutdown by pressing the power-button. The only possibility is to switch off the computer. Then it normally starts.
The problem also occures with a clean installation of OpenSuse. And it cannot be solved by updating kernel, X-Server and KDE.
What files do you need? I'll post them.
The same computer worked fine with OpenSUSE 11.1. I think, the new radeon driver could be the problem, I have to use it because I can not use fglrx anymore as with 11.1
I take a look into my log-files, but I cannot see any error. Sometimes it seems, that /var/log/messages is partly overwritten by restarting the machine.
lspci:
Code:
Code:
whenever i open my kubuntu desktop it brings a black screen. the pointer of the mouse is active but i cannot see anything.but my gnome desktop works well.what might be wrong?
View 5 Replies View Relatedi am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.
View 4 Replies View RelatedI wanted to get rid of ubuntu splash screen, and edited the line GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash text". Now it won't load at all. It nust shows the same purple background without ubuntu logo, then turns black and shows few lines of text. After displaying "Checking battery state... [OK]", it freezes and does not move further. I can't even.start a recovery mode because I have no dual boot and do not get this opfion at the start.
View 7 Replies View RelatedI am just new in Linux. Last week I install Linux Fedora12 into my notebook. The problem is sometime it come black screen when we want to start after booting. It also blank screen when want to tab to other properties in system. It is due to graphic card or else which the system used ATI Radeon.
View 1 Replies View RelatedI have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies View RelatedI downloaded Fedora-14-i686-Live-Desktop.iso and used the Fedora liveusb-creator to put this on a 2GB USB stick. Everything seemed to have gone well and it said complete; however, when I try to boot from the USB stick, I get a black screen with a linux copyright notice at the top and it just stays at that screen forever. I tried this on two computers with the same results.
I'd previously tried with Ubuntu and had a similar issue, it would go to a purple (if I remember correctly) Ubuntu screen and it sat that forever.
I have a Logitech Quickcam Chat webcam (USB ID 046d:092c) that's worked with my Ubuntu with minimal problems (just some nVidia driver crap) for ages now. I'm not using nVidia anymore (Intel now), but since my fresh install of Lucid, my webcam doesn't seem to capture anything. It is detected by lsusb, but when I open Cheese, the picture is just black. Skype doesn't give me any video at all, not even that annoying static or green lines. Clicking the Test button in my Skype Options undedoesn't do anything;double-clicking it gives me a full-screen grey screen - pressing Escape takes me back to the preferences window. After I get the grey full screen and press Escape, the Test button is gone until I close the Options window and open it up again.Going into gstreamer-properties and testing v4l2 (under Video -> Default Input) just shows me the 'Testing ... Click Ok to finish' window for ages until I close it - no video appears or anything and I'm not entirely sure what I'm supposed to be seeing. Testing with the 'Test Input' option does give me the coloured lines and static. Testing v4l seems to make it crash, but no error comes up in the terminal I'm running it from.lsusb output:
Code:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:092c Logitech, Inc. QuickCam Chat
[code]...
With a default 11.4 (64bit) installation, and the one click installer for VLC at VideoLAN - VLC: Free streaming and multimedia solutions for all OS! - if you get a black screen when watching movie files there are 2 solutions.1)-> Go to Tools->Preferences->Video-> Remove the tick for "Accelerated video output (Overlay)"-> Try and play the movie again, you should now see output.2)Download proprietary drivers for your graphics card - I think theres a thread on the forum dedicated to that.
Example, NVIDIA 8600 using the default 11.4 open source drivers (nouveau?) shows a black screen when VLC uses "Accelerated video output".However, installing the proprietary NVIDIA drivers, VLC will successfully show the movie using "Accelerated video output".To clarify the default VLC installation with "Accelerated video output" ticked - works with proprietary NVIDIA drivers - and doesn't without.
I burnt the Ubuntu 9.10 ISO to CD and installed on a freshly nuked Dell 2350. It is pentium 4 at 1.8 MHZ with 512 RAM. Just a spare machine I have sitting there. Install went fine, restarted box, boot from hard drive. I get the little white Ubuntu symbol on a black screen and then a black screen with un-occupied white tool bars at top and bottom of screen and a functional mouse pointer, then nothing. It freezes there.
If I restart by holding the power switch in it occasionally shows multiple CPU overtemp messages and freezes with totally black screen. I can run the CD live and everything works like a champ. I'm going to like Ubuntu once I have this sorted out. If I boot from CD and choose the run from first hard drive option, everything loads and works fine. I was able to remove CD, update and save preferences, etc..
On one occasion, I was able to restart and boot from hard drive and it worked fine but usually it freezes at previously mentioned black screen with white bars top and bottom with mouse pointer. Please excuse my ignorance as I have very little knowledge of the inside workings of computers. I didn't even know about burning ISO's or changing boot orders until reading online. For what it's worth, the computer worked fine with no known hardware problems when it was running XP. It also is completely stock with no mods or added/replaced hardware.
Once I select Ubuntu 9.10 from Grub, it shows the logo, the logo disappears, a jet black screen shows with 2 horizontal white dashes appear at the top.
I recently uninstalled Firefox 3.6 pre using synaptic to go with the stable Firefox 3.6 installed with the PPA repository that was given in the Ubuntu wiki. It installed and ran fine but when I rebooted, ubuntu wouldn't start.
I went into recovery mode a few times, tried to fix any broken packages and when it said it was fixed, I tried rebooting and the same error occurred. I also tried to use dpkg-reconfigure for the xserver-xorg and then ran startx but x didn't load properly. Some more debugging and a few driver errors came up involving intel so I installed a package which fixed that.
Ran the dpkg-reconfigure again and ran startx. This time x loaded but it was a jet black screen and I had to hold ctrl + alt and hit a few F keys to get back to the prompt.
I understand this could be a xulrunner error so I tried reinstalling xulrunner-1.9.1. I also rolled back my repositories to get the Firefox 3.5 branch and I installed the original Firefox 3.5, ran firefox --version to make sure and I finally have that back installed.
I tried rebooting and running the OS normally, but again it failed at the same point. What exactly should I do next? Yes, I could reinstall but it's such a small problem with maybe 1 or 2 broken packages, is there anyway I can save my current ubuntu system (as I have made countless configuration changes months ago and I do not want to do it again)?
I have upgrade to the Lucid alphas. Just lately when I turn on the computer it appears to start ok but it will not go to the signon screen. It stops on a blank black screen with a curser top left corner. Pushing keys just seems to give a mixture of letters ,symbols and numbers nothing intelligible, how to fix this concern or at least how to get into safe mode so I can attempt to find the problem.
View 2 Replies View RelatedI'm new using Ubuntu desktop and I made a mistake while reading a tutorial on shell. I used the bind ctrl + alt + Fx (in this case, F6) and I didn'tnow how to come back to my original desktop after that. So I did a hard reboot . Since, after booting I see the loading screen with Ubuntu writen on a purple background, but after that I get a black screen and I cannot type or do anything.I tried to log in in "safe mode" (or something like that) and it worked but I got a low screen resolution of course and after rebooting in normal mode it still doesn't work.
View 5 Replies View RelatedI just downloaded Ubuntu 10.10 Netbook. Sometimes when i am start my netbook i boot to black screen. I can hear the loading music but the screen is just black. And when i press the powerbutton to close the computer and turn it on again, then sometimes i can see the screen and everything is working. and sometimes it is working just fine.
When i have my usb mouse and usb wireless network thingy it seems to have a hard time booting, but when i unplug my usb mouse and network thingy it boots just nice.
It would be nice if i could turn on the power and then the netbook would just startup and show me a screen, and didnt have to unplug my usb things first...
openSUSE 11.2 i586, ASUS P3-P5G43 Rev. R1.04G Intel Core2 Duo CPU E8400@3.00GHz, Intel G45/G43 Chipset The Problem: The screen is for the WSXGA+ (1680x1050) standard. This resolution was detected, at the initial install and later with sax2. It shows the desktop with a 1 inch wide black area along the right border of the screen and that is exactly what is missing at the left border (i.e. invisible). It is like the desktop is shifted to the left of the screen. As far as it is visible the image is crisp and clean. Lowering the resolution to 1280x960 works ok, but the aspect ratio is no longer correct. I have checked the archives and found Intel integrated graphics - openSUSE Forums but trying different hints from the thread did not help.
[Code]...
downloaded Fedora 15 Live CD and made a booting live CD with it , everything went Okbut after the first screen " automaticlly boot after 10 s " everything just went creepy and the contrast of my screen has become very very low , I was able to see that unity booted but I barely could see the icons without being able to see anything esle , just dark*darkthe same happened with the usb live version .Im having a " Mageia RC " installed in dual-boot with windows 7 and I have the same problem with it . which means, the distro is there but cannot be used cuz the contrast is very very low
View 1 Replies View RelatedIf I choose to boot Ubuntu, the splash screen appears, but right when the login screen should appear, I get nothing. This is how it started: While update manager was installing updates, I hit ALT+F2 to get to the TTY. I did this because ubuntu now refuses to mount any usb devices whatsoever. (for more on that, see this link: [URL] Once I got to TTY3 or whatever, I hit ALT + F7 to get back to the GUI. All I got was a black screen and a mouse. The computer froze and I restarted. All I have now after booting is a black, frozen screen. ALT + any F key to get to TTY doesn't work.
View 2 Replies View RelatedI've installed Ubuntu 9.10 in my old desktop, i.e. Compaq Evo D510 e-pc:
Intel Pentium 4 1.7Ghz
1GB 400Mhz RAM
80GB HDD
Intel 845G chipset board
Onboard 4X AGP Intel Video chipset
Onboard audio
The above is my setup and Ubuntu runs perfectly fine when it is being cold booted, i.e. I shut it down during the night and boot it in the morning, it boots perfectly fine. But while using, it suddenly freezes and I'm only able to move my mouse pointer and nothing else works on the screen. I tried doing the Ctrl+Alt+(F1/F2/...) but nothing works.
So when I restart it using the power switch, it goes into the black screen and nothing loads up. I'm stuck over here. And if I turn it off for around 30mins by removing the power plug, and then reboot it again, Ubuntu loads without any problem and runs for sometime, then again the same freezing problem happens and I have to wait for another 30mins to boot it up again.
I have a 28" monitor connected to it and it runs at 1920 x 1200 (16:10) resolution at 60Hz.
I have been trying to install Ubuntu 10.10 64bit on my Windows7 64bit machine. I created the Ubuntu installation on a USB stick and when I run it live from the stick, it works fine. Under Windows7, I created a partition for Ubuntu, and after reboot run the installation off the USB stick. During installation, I pointed the installer to the partition I just created, and told it to use it as "/" (root - this is the part where I think I could have screwed up, but I am not sure). I want to have both Win7 and Ubuntu on that machine. I did not create the SWAP file as I don't think I'd need it (this is a 8Gb RAM 3Ghz i7 machine). The installation goes without any problem, but then I reboot...
When I restart after installation, and any time after that, I get to the grub screen that allows me to pick the system I want - and when I chose Win7, everything's fine. When I want to pick Ubuntu, or Ubuntu in recovery mode, the screen goes black, and after a short while it seems the monitor itself stops receiving any input from the computer, as it goes into standby. There is no error message, no restart of the computer, no message after I select Ubuntu and click enter. Nothing, just total blackness and despair, and a monitor in standby mode.
I just installed Ubuntu 10.04.1 (desktop edition) on my netbook (NB200), the installation worked fine, but when i restart i get a black screen with a blinking underscore on the top left corner. I don't have any options as any key that i press is just printed on the screen. (This happened with every version that I tried so far, even the netbook remixes).
If I don't press anything for some minutes, Ubuntu is finally starting, but without showing the Ubuntu loading screen in the process, like it did when I tried it with the USB.
Fedora 12 64bit - hostKVMThrough difficulty and pain I succeeded update Fedora. However today when I boot the PC only a black screen resulted (gui booting). I can type on the black screen. Pressing Ctrl+Alt+Del reboots the PC.The PC is working. I have another HD running Windows Vista. oot without problem. I'm now running it posting this thread via IE.
View 5 Replies View RelatedI recently upgrade from Lenny to Squeeze. My graphic card is nVidia Corporation G86 [GeForce 8400M GT] (rev a1). Using lenny latest drivers from nvidia worked fine. I installed nvidia drivers using Debian packages 195.36.31-6 and latest driver from nvidia site (260.19.36) and also other nvidia drivers. The problem is when I start gdm3 I saw nvidia logo but then when it loads gdm3 it shows gdm3 screen with lot of black pixels and other random pixels and then the screen freezes. And the only thing I can do is restart using [alt]+[sysrq]+b.
View 13 Replies View RelatedI am not sure what is wrong I am dual booting with windows 7 I have partitioned correctly when I boot from the CD The first screen comes up where it says automatically boots in 10 seconds. when it finishes counting down it pauses and then goes straight to a black screen I also tried to load Ubuntu and the same thing happened. Not sure what to do?
View 3 Replies View RelatedAfter dual booting into Windows to play Mass Effect 2, I hit the windows key by mistake, and the screen quickly turned black! Since then, I couldn't boot into Fedora, nor Windows; not even Fedora's linux rescue. I see the GRUB, I hit enter on any one of the two options, and all I see is a black screen!
View 3 Replies View RelatedI have windows 7 + Ubuntu 10.04 in dual boot, I noticed that sometimes the ubuntu was not booting.
Right after I select the os in grub (ubuntu) the screen goes black with the blink cursor and nothing happens, that's all no messages it's stuck there forever.
Today, it does this every time I try to enter Ubuntu, it's just stuck there.
I've just tried installing Ubuntu 10.04 on my powerpc. It installed fine, and booted first time ok, but since restarting it just seems to boot into a black screen. My monitor says 'going to sleep mode'
I don't think it's hanging on anything, as I can hear sounds if I play around with the keyboard. Could this be something to do with the resolution being too high? If so, can anyone tell me how I go about changing this?
I've got a problem with my Ubuntu Server 11.04 amd64, I think the problem comes from GRUB 2. Here is my problem : I updated my server and I now have Linux 2.6.38-10-server (in addition to 2.6.38-8) and, when I try to boot on version "10", I think I have a Kernel Panic because the screen keeps black and there is no use of the HDD (I can ear it working with version "8"). I also looked at /boot/grub/grub.cfg and I didn't saw any diference between the lines for v10 and those for v8 (except for "8">"10" of course).
I tried with Recovery Mode too, with this result : Loading Linux 2.6.38-10-server... Loading initial ramdisk...
> No use of the HDD (I don't ear it), and it's "frozen", can't do anyting but reboot it by ACPI (nothing happend when hitting "Num Lock") Another question : can we have no submenus in Grub2?
Yesterday I upgraded from 9.10 to 10.04 via Update Manager. But when the upgrade procedure was finished and I made a reboot, I only come to the Ubuntu logo appears for a second, then the screen turns completely black and nothing happens. I then have to reboot via the power button.
But I can get it working with so far no problem, by booting to the third option in the boot options list. In the list there are several options, something like this code...
Now the question is; what does this mean when there are several alternatives with the same name? What is the difference between alternative 1 and 3, other than 3 is working and 1 is not? Is there any problem running alternative 3 instead of 1, and if so how do I get it to boot from alternative 3 as standard?
If this is not the right way to do it, how can I figure out what the error is on alternative 1?
