Ubuntu Installation :: Packages For Gdisk?
Mar 19, 2010
With GPT partitioning more and more needed (MSDOS partitions not supporting drives larger than 2TB), and fdisk and sfdisk not supporting GPT, and parted still being cranky, I'm looking for another partitioning tool. There is a project called "gdisk". But I can't find an Ubuntu package for it. I guess I'll have to build that one from source. Is there a place to suggest adding the package? how to build my own Ubuntu packages. Or if I can find enough docs on the partition table structures, maybe I can write my own that will be even easier to use from the command line
View 2 Replies
ADVERTISEMENT
Sep 10, 2010
I'm having big problems trying to install Ubuntu 10.04 (32bit) on a new computer - nothing has ever been on it so it's fresh as a daisy. It has no optical drive so I created a live USB installation through Unetbootin, which starts up no problem and I can start the installation to the hard drive. After picking my keyboard layout in stage 3, the installer hangs. A crash message appears in the top right (but nothing overtly obvious happens and I can close the installation window easily). Trying to start GParted from the applications menu also results in the same crash error. Looking around I thought this may be some disk formatting issue so I created a new ext4 partition for the whole hard drive (160GB) with the disk utility which went without a hitch but hasn't made any difference.
I can however start GParted from the command line (gksudo gparted) into the partition created above just fine but still no dice when opening from the applications menu, it just pops up, starts to read then closes. Just to check if this was Ubuntu specific I also tried running Fedora off another USB and the same thing happens, the installer hangs when reading the hard disk. Looking around this seems like a common problem with many users finding the same issue (there's a 4 page topic about it going back 12 months)
View 5 Replies
View Related
Jun 25, 2011
I have installed 10.04 64bit on two machines that have different hardware. After the installation (that went perfectly by the way), I needed to add extra partitions on both machines. Normally I use fdisk for this, and on one machine this went OK. On the second machine, however, after starting fdisk, I got the warning message that a GUID Partition Table was found on the disk, and fdisk was not compatible.
This leads me to believe that during installation on the first machine fdisk was used to partition my harddisk, and on the second machine gdisk or gparted was used. Is this normal ? Is there a way at installation time to force the use of fdisk ?
View 1 Replies
View Related
Dec 5, 2010
I would like to mount several partitions into my dd of my /dev/sa, normally I do this with gdisk... however the gpt gdisk debian is not there into the leeny testing repositories... any ideas if it has moved into another packages
View 1 Replies
View Related
Jul 26, 2010
when I try to install anything using the Ubuntu software centre, I get the following message Requires installation of untrusted packages The action would require the installation of packages from not authenticated sources.
View 1 Replies
View Related
Apr 30, 2010
Whenever I do sudo apt-get or use the Ubuntu Software Center, I can't download anything because a message comes up saying "Action requires installation of untrusted packages: The action would require the installation of packages from not authenticated sources." I've been trying to download GIMP and Thunderbird, so... I dunno what the problem is.
View 8 Replies
View Related
Nov 17, 2010
I recently upgraded from F13 to F14 using "preupgrade". This is the first time I've used preupgrade. So far, F14 is running OK. There are some leftovers from F13 and I'm wondering if this is correct.
Q1: There are 176 F13 packages remaining. [alfrugal@localhost Documents]$ rpm -qa | grep fc13 | wc -l 176 Is this OK? FWIW, after the upgrade, I ran "package-cleanup --orphans" as recommended by the "preupgrade" page on the Fedora Project wiki.
Q2: Also, my GRUB menu was correctly updated for F14, but it still contains the three entries it had for F13. Is it normal for the preupgrade process to require the user to clean up the obsolete entries from the GRUB menu?
View 2 Replies
View Related
Sep 21, 2010
How to add packages using X-Window's add/remove packages option in RHEL-5.3 as it shows only the currently installed package and and does not show any thing when we click the button "available packages" ?
View 2 Replies
View Related
Jan 5, 2010
HOW TO INSTALL PACKAGES IN IT ,IT SHOWS SOME ERROR (Cannot install source packages) OR (No packages were given for installation.)
View 5 Replies
View Related
Jun 24, 2010
I did the UPGRADE from Karmic Koala to Lucid, and everything was going well. But now I've been having problems with the UBUNTU UPDATE tool for the last 2 weeks. Every time I try to do an update check on the packages, I get the following message:Failed to fetch http:[url]....Release Unable to find expected entry deb-src/binary-i386/Packages in Meta-index file (malformed Release file?)
Some index files failed to download, they have been ignored, or old ones used instead.I've tried changing the servers to MAIN and others, and still no way to solve it. I've also checked for other posts, but haven't found a solution yet. Here's my SOURCES LIST (gksudo gedit /etc/apt/sources.list)# See http:[url].... for how to upgrade to # newer versions of the distribution.
View 3 Replies
View Related
Apr 24, 2010
I've been trying to fix this problem for quite a few days now and have done a lot of searching on these forums, Linux Mint Forums and some others Google lead me to and have has some success, but am now stuck.I have posted a thread on this same topic on the Linux Mint Forums, but have had no success (if you want check it out at:URL...Originally I received error messages when trying to update involving certain repositories which couldn't be accessed (because they either didn't exist or had been moved) and I hunted these down and changed or removed them.
I have done much searching, etc. and cannot find any broken packages. I have tried many many different commands which have mostly done nothing.I seem to be in a similar boat to this person: URL...
View 2 Replies
View Related
Feb 5, 2011
Package Installation error
Recently I get an error while installing any packages offline.
"Action would require the installation of packages from not authenticated source".
The key icon at top tight corner shows.
View 3 Replies
View Related
Feb 9, 2010
I have an installation of Ubuntu 9.04 on a standalone workstation. I need to download all of the packages for the normal installation and updates.Does anyone know where I can pull the complete package sets rather than individual packages rather than one at a time?
View 1 Replies
View Related
Oct 16, 2010
Since upgrading to Maverick, the Update manager will not install the Google update as it says that this "Requires installation of untrusted packages"
What needs to go into the Sources file to get around this? I used to have a gui for doing this, but Maverick appears to have scribbled this as well.
View 2 Replies
View Related
Jun 1, 2010
I did a clean install of fedora 13 on my sys, however when i run
Code:
rpm -qa |grep fc12
lots of and lots of fc12 packages pop up. below is the list. if there is fc13 version of these packages, and if there is (which I suspect for at least some of them there should be) why my sys doesn't update to those packages?
here is the list of fc12 packages:
Code:
~$ rpm -qa |grep fc12
ctan-cm-lgc-fonts-common-0.5-17.fc12.noarch
plexus-compiler-1.5.2-4.3.fc12.noarch
texlive-texmf-errata-fonts-2007-7.fc12.noarch
[code]....
View 5 Replies
View Related
Dec 2, 2010
Is there a way using dpkg or apt-get to segregate user application packages from system packages? What I envision is an /apps directory structure that can be the install target for selected packages so not to "clutter" the storage areas for the system administration files/packages - maybe even with permissions set so that (a GROUP of) users could install packages on an Ubuntu server w/o SysAdmin guidance. This could also allow 1)system upgrades with or w/o including these packages, and 2)the sharing of /apps (via NFS) among common Ubuntu systems. Is this doable using the dpkg or apt maintenance tools?
View 2 Replies
View Related
Apr 11, 2010
I have a broken package and can't seem to fix it. Now, nothing can be downloaded from synaptic. I get the following error message:
Processing triggers for software-center Setting up courier-mta (0.61.2-lubuntu3) * Starting Courier mail server. Starting Courier mail server. invoke-rc.d: initscript courier-mta, action "start" failed. dpkg: error processing courier-mta (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: courier-mta E: Sub-process /usr/bin/dpkg returned an error code (1) How do I fix this?
View 1 Replies
View Related
Apr 30, 2010
during installing tons of packages rather did not install/upgrade or where not found so now its done but audio slider from top bar is missing and so is a few things dont work now what can i do?
View 3 Replies
View Related
May 24, 2010
I tried to install some packages using "apt-get" but every time I try to install one it throws "Aborted" message, I tried several packages and combination allways with the same result.
But If I install them with Synaptics I can do it without any problem, as I know Synaptics uses apt-get to install packages so all this is a bit confusing to me .
apt-get version:
apt 0.7.25.3ubuntu9 per a i386 compiled on May 14 2010 15:33:48 I'm using Ubuntu 10.04 Lucid Lynx
Should I report some more information ?
View 7 Replies
View Related
Jun 26, 2010
I have a lenova B450, installed ubuntu 10.04 netbook remix(dual boot with win xp), everything works fine, even installed some games through ubuntu software center. I tried to install cd burning software, i received the following message. Requires installation of untrusted packages The action would require the installation of packages from not authenticated sources. Even after i gave OK there was no response. Now when i tried to install games also same message & no response.
View 3 Replies
View Related
Aug 23, 2010
how to install tar.bz2 packages.
View 9 Replies
View Related
Sep 29, 2010
I did a succesfull Alternative Installation of 10.04 yesterday and managed to load the packages that allowed me to install NetGear NG511v2 drivers. So far so good.
When I plug in a usb flashdrive it only mounts during boot-up. I know I can load a package that allows me to select ' hot mount usb drive' (or similar check box). How do I find what packages to install to give me this functionality?
Similarly my accessories tab shows Bluetooth as being available. There is no bluetooth on the laptop so how do I find out what packages I can safely remove?
The wider question is, is there a list of packages with their associated functions and associations?
I've already had a look at the lists of installed packages and available packages on my CD, but I have no idea what they do.
View 1 Replies
View Related
Oct 11, 2010
It's my first post at this forum then - hello everyone ;] I have problem with upgrade my Ubuntu 10.04 to 10.10 It's a screen with error at upgrading:
There's my logs from /var/log/dist-upgrade/:
apt.log : http://paste.org/pastebin/view/23438
main.log : http://paste.org/pastebin/view/23439
What can be problem? I was trying update using console or synapic but the same error. PS I have Polish Ubuntu but error comunicates is in English then I think it's no problem
View 2 Replies
View Related
Oct 16, 2010
Recently I installed airlines-themes, using the command
Code: sudo aptitude install airlines-theme It worked perfectly. My question is where are all these packages downloaded locally, so that if needed I can install them later without an Internet connection. Not just theme, I can do it for other application as well (for eg. ubuntu tweak and many others).
View 5 Replies
View Related
Nov 15, 2010
I would like to do a fresh install of Ubuntu 10.10 on my Ubuntu 10.04 machine.Living in South Africa where we pay per MB, the 700MB live cd will use my data cap up for the month. I have a few other applications/programs installed (like vlc, skype, remastersys...) that are not part of the normal distribution. Is there a way whereby I can extract these applications to install again without having to download them of the internet? Also to get my added repositries, codecs,
View 1 Replies
View Related
Dec 13, 2010
I am trying run an update but I get an error "Fix broken package first".I then went into synaptic and fixed the broken packages and tried to the update but I had the same problem still.
View 9 Replies
View Related
Feb 8, 2011
if there was a version of Linpack for Ubuntu. Yes, I know about TNT, Atlas, and Lapack, but none of them have the stuff I want.
View 2 Replies
View Related
Jun 14, 2011
I open Synaptic package manager, and did a search for Qt. It came back with about 2 to 3 dozen packages, including qt3 and qt4. What to install?
View 1 Replies
View Related
Jun 14, 2011
I need to substitute the openssl package modified by ubuntu with the original openssl package because I have to collaborate to a university project that use SSLv2 protocol.I tried to install it manually (by ./config and make) but nowaday the system continues to use the old one (0.98o-5ubuntu1).What i have to do to substitute the modified version with the original one?
View 1 Replies
View Related
Sep 1, 2011
I have ubuntu 9.04 Jaunty and I was experimenting with theming. But I need to install 4 packages which I can't seem to find on the net.I DO NOT want to update as this is the last version in which you can completely customize the login screen.
View 9 Replies
View Related