I need to substitute the openssl package modified by ubuntu with the original openssl package because I have to collaborate to a university project that use SSLv2 protocol.I tried to install it manually (by ./config and make) but nowaday the system continues to use the old one (0.98o-5ubuntu1).What i have to do to substitute the modified version with the original one?
View 1 Replies
I just installed ubuntu 10.10, and im triying to update, when i uncheck the packages that i dont want and click on the "install updates" button in the update manager, the update manager check it again and download the packages that i dont want
View 1 Replies View RelatedI'm running Ubuntu 10.04 64 bit as a VirtualBox (3.1.6) guest. Every time I try to run apt-get update, I get the following:
[Code]...
I'd like to update /etc/apt/sources.list with all the packages available on packages.debian.org and packages.ubuntu.com without apt-get, aptitude, and synaptic then trashing my system by trying to update all the obsolete packages. (I'm stuck with 8.04) I only want to update the packages / install new ones with their dependencies as I request them. How do I do that?
View 9 Replies View Related9.04 has not been updating and is giving these messages.
Failed to fetch [URL]...86/Packages.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...86/Packages.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...rce/Sources.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...rce/Sources.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...86/Packages.gz 404 Not Found [IP: 91.189.92.170 80] .....
Some index files failed to download, they have been ignored, or old ones used instead.
I can't seem to figure out what's going on here. Whenever I use synaptic to attempt to add/remove anything I receive the following error: (Reading database... 65%dpkg: unrecoverable fatal error, aborting: files list file for package 'dnsmasq-base' is missing final newline E: Sub-process /usr/bin/dpkg returned an error code (2) A package failed to install.
View 3 Replies View RelatedGoing from 10.10 to 11.04 and I get this message:[URL].. I honestly have no idea what most of those are (yes I'm a huge noob), so it's possible that it's necessary to delete some of them, but Handbrake? Open Office? Why would it delete those? What possible reason could there be?
Additionally, what does "no longer needed" mean? Is it going to delete those packages too?
I would like to know if it is possible to disable apt-get's on a few packages I have compiled from sources : I have removed some ext from PHP and I don't want it to upgrade itself to a new version when there is one.
View 3 Replies View RelatedA few weeks ago, i installed Ubuntu Desktop 10.10. I installed several of my previously used programs and am now having trouble with the update manager. It refuses to download updates; insisting that it does not trust the source. The details in the error message indicate that the problem is with a package for Banshee Media Player. I am posting a link for a video I made that displays this problem. [URL]
View 5 Replies View RelatedI installed F12 to a live USB stick. When I boot up the system it says there are several hundred updates available. I've tried to update packages, but when I reboot the updates that claim to have been made do not appear. The system reverts to its original state after reboot.
So is it possible to do this? Can one have persistent packages? (this does seem to work with ubuntu)
Or is F12 on a live USB stick supposed to be pretty much the same thing as having a live (read-only) CD?
What I'd really like to do is have a small version of F12 on a USB stick that has up to date packages I need while dropping the packages I don't need.
Whenever I try to either update, or install new software to Ubuntu 10.10, I get this error...
Requires Installation of Untrusted Packages
The action would require the installation of packages from not authenticated sources.
I can't do any updates! it just gives a message like this: "The following packages block the update: kdebase-workspace-libs4+5"
View 2 Replies View RelatedI've just updated fedora-release* packages, then, after a yum upgrade command I get the message: No Packages marked for Update
View 1 Replies View RelatedI wanted to do a routine check/update today and I received this error code...
View 3 Replies View RelatedI'm trying to update my Ubuntu 10.04 to 10.10... But I get this error message:pkgProblemResolver:Resolve generated breaks, this may be caused by held packages
I tried to disable all the repositories, and also "sudo apt-get -f"... But still having this error message...
When I tried to upgrade (update) current packages list in my synaptic I got error messages about unresolved gpg keys as following:
Code:
How I can get all missed keys for completing update process?
I am creating custom install media using the Fedora Core 14 DVD as a base and I have gathered all of the packages and their dependencies I require using the yumdownloader command.I made sure to download the @core group along with the ones listed above. The problem I'm running into is that I don't know how to update the media's repo information to reflect some of the updated packages I have downloaded. So when I go to install on the device, it's saying it can't read/open a certain package and you can see that it's looking for an older version because I'm guessing its repo is telling anaconda that this is the specific version to look for. I'm looking for a way to "update" the repo found on the installation media.
View 1 Replies View RelatedI'm trying to do a net install with the latest release of debian - but my ethernet card is not recognized/the drivers are not available because I have a card that requires a linux kernel version of 2.6.35. This is obviously a problem because I can't download any additional packages, and I can't update the version because I'm not able to connect to the internet. I have installed it, but it's only text (which I assume is because I could not install the graphical interface, correct me if I'm blaringly wrong here). So what can I do to install debian on my laptop and be able to use my Intel Centrino Advanced-N 620 network card?
View 14 Replies View RelatedI was running 10.04 LTS and had decided to stick to the LTS versions as I'm now running my machine as a server and don't want to be updating regularly.Every time I logged in via SSH I got a message telling me there where packages to update including a security update. So I did a search to find out how to perform an update on Ubuntu server from the command line.What I found was to do this:sudo apt-get updatesudo apt-get dist-upgradeAfter doing that I rebooted but now my machine gives me this message:
init: ureadahead-other main process (794) terminated with status 4Your disk drives are being checked for errors, this may take some timePress C to cancel all checks currently inprogressI'm not pressing C yet and leaving it alone to finish, but I noticed when the machine booted that one of the options for booting talked about Ubuntu 10.10, so I'm worried that I've updated from 10.04 LTS to 10.10 by accident?
I'm trying to use my update manager, and I keep getting an error box that says "Requires Installation of untrusted packages. The action would require the installation of packages from not authenticated sources" When I push the "Details" Button a text box appears and inside it says "libv4l-0."
View 1 Replies View Relatedwhen I try to install anything using the Ubuntu software centre, I get the following message Requires installation of untrusted packages The action would require the installation of packages from not authenticated sources.
View 1 Replies View RelatedWhenever I do sudo apt-get or use the Ubuntu Software Center, I can't download anything because a message comes up saying "Action requires installation of untrusted packages: The action would require the installation of packages from not authenticated sources." I've been trying to download GIMP and Thunderbird, so... I dunno what the problem is.
View 8 Replies View RelatedI recently upgraded from F13 to F14 using "preupgrade". This is the first time I've used preupgrade. So far, F14 is running OK. There are some leftovers from F13 and I'm wondering if this is correct.
Q1: There are 176 F13 packages remaining. [alfrugal@localhost Documents]$ rpm -qa | grep fc13 | wc -l 176 Is this OK? FWIW, after the upgrade, I ran "package-cleanup --orphans" as recommended by the "preupgrade" page on the Fedora Project wiki.
Q2: Also, my GRUB menu was correctly updated for F14, but it still contains the three entries it had for F13. Is it normal for the preupgrade process to require the user to clean up the obsolete entries from the GRUB menu?
How to add packages using X-Window's add/remove packages option in RHEL-5.3 as it shows only the currently installed package and and does not show any thing when we click the button "available packages" ?
View 2 Replies View RelatedHOW TO INSTALL PACKAGES IN IT ,IT SHOWS SOME ERROR (Cannot install source packages) OR (No packages were given for installation.)
View 5 Replies View RelatedI am trying to do the update of ubuntu 9.10 UNR (it is your netbook equal to every other), but I get a error, it says it cant get some packages from the servers.
I tried to do a bug report but I dont know how.
When I allow Update Manager to download and install security and other updates it saves the deb package files in /var/cache/apt/archives. I don't really need or want to keep these files. I seem to recall that in versions years ago the default was to delete them after installation. But the issue at the moment is how to get 10.04 and later to automatically delete the files after installation. Space is not a concern on my desktop PC nor my server. It is an issue with various virtual machine installations as they are limited in disk space and the more they take up the more there is to backup.
I have tried telling Synaptic to delete the files after installation but this does not change the performance of Update Manager.
if there is a way to blacklist certain packages when updates come around. The reason for this is that I have two repositories that contain Smplayer and Mplayer. But one repository versions of this aren't VDPAU active (but the build is newer).
View 1 Replies View RelatedI read something like said:
Update Packages not authenticated so imagine.
I wonder why (and how) a 'contaminated' update/package can get access to the Ubuntu server.
what I have on my desktop waiting for my approval to download?
The information of those updates is as follows:
1- Firefox
Changes for the versions:
3.6.8+build1+nobinonly-0ubuntu0.10.04.1
3.6.9+build1+nobinonly-0ubuntu0.10.04.1
[Code].....
1. when we install package and run update manager, are all the packages stored in /var/cache/apt/archives ?
2. let's say i make a copy of all the packages i installed and from update, store them in a backup drive. How do i make a freshly installed Ubuntu to copy/use these packages instead of downloading them from the internet?
