Ubuntu Installation :: "omitting Empty Partition" With Fdisk
Dec 18, 2010
Since I installed TinyXP on another partition on my PC, I get "omitting empty partition" when I use fdisk -l.
Code:
omitting empty partition (5)
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
NOTE: I also searched for the palimpset error and I found a Bug Report there: [URL. I don't know if these informations could help to fix this problem, I think it's related and probably cause by the installation of Windows XP and the way that gparted and palimpset read the partitions.
View 9 Replies
ADVERTISEMENT
May 7, 2010
I have a 120GB HDD with a 22GB partition for Ubuntu and the rest for Windows XP. Windows finally died on me so I attempted a fresh install on its partition. However, the install threw a ton of errors so I used a LiveCD to re-install Grub and I booted into Ubuntu. I open up the disk utility to re-format the Windows partition so I can re-try re-installing Windows, but immediately I notice that the partitions are not right. If you add up all the partitions, they are about, say, 18 million terabytes over my HDD's 120GB capacity. Ahhh! What do I do?
I don't think anything is terribly altered, since I can still boot into Ubuntu, but I am completely confused and slightly worried that I might kill any chances to save my HDD I can't post a screenshot due to my post count, so the image loses some of its efficacy in making it small enough for an attachment. Here is the output of fdisk -l: Code: omitting empty partition (5)
[Code]...
View 5 Replies
View Related
Feb 1, 2010
I recently got a 4 GB USB-stick (CBM V88) at a meeting. After removing all files to my hard disk it still had about 200 MB used space! I tried several kinds of deleting what ever that was -- to no avail. So I got furious and zeroed out the first 210 MB with dd and then used fdisk and mkfs to create a new FAT 16 partition (I need the stick to transfer data between windows and linux/bsd).
So far so good. Then I noticed still 4096 kB used space with no file shown What can be done here?
During fiddling with fdisk parameters heads / sectors / cylinders I noticed that there were something like 5125 blocks of 512 bytes not allocated (which is about 2,5 MB?!?). Can anyone point me to a reference how to calculate an optimized heads / sectors / cylinders count for a stick of the size of 4.108.070.912 bytes or, even better, explain it here for all interested readers?
View 14 Replies
View Related
Jul 18, 2011
I just installed ubuntu via the windows executable and I couldn't mount my NTFS partition. I found this a little odd and I checked fdisk and it seems to think I don't have an ext4 partition as my entire internal HD is displayed as NTFS.
Here's the fdisk output:
When i try to mount the NTFS partition /dev/sda2 i get the following output:
I can't make heads or tails out of this. Anyone know what's going on here?
Windows recognizes that 30GB were taken from the NTFS partition for my linux install. It reads the max partition size as 465GB. fstab reports the NTFS partition size as 488GB.
View 2 Replies
View Related
Mar 26, 2010
I gave upon 11.3 M4.Tried installation by text mode but there's another screen showing various USB devices status superimposing on the Linux text install. Returned to Live installation via Live CD. Installation completed > restart >autoconfig failed. Tried live installation again but Suse kept suggesting installing into one of the empty 2 Gb partitions. Also had problems with Gparted Live 0.5.1-1 CD because somehow the keys froze. Had to replace it with 0.5.2-1. I am installing 11.2 on a laptop but right now I am stuck with frozen "Creating cache files for fontconfig". This has taken over an hour and nothing seems to be happening. I have successfully installed openSUSE 11.2 on an older laptop and a desktop. Also experienced installing Windows 7, Ubuntu and PC-BSD on both types of machines.
View 9 Replies
View Related
Jul 2, 2011
i had installed fedora 14 into my new hardisk(1500gb) as new server the problem is how can i use the fdisk to partition the hardisk into two partition.
View 10 Replies
View Related
Aug 4, 2011
I wonder whether to place swap partition on LVM or on standard fdisk partition which will not be in LVM.What is better and more often used on production ?
View 4 Replies
View Related
Nov 16, 2010
I've had Ubuntu 10.10 installed for a while and I recently cleared a partition to install Windows XP. However, when I load from the Windows XP boot CD, I get "7379one MB disk 0 at ID 0 on ?Bus 0 on atapi(Setup cannot access this disk)". I've tried just about everything
View 4 Replies
View Related
Sep 18, 2010
How would I combine a empty partition with my existing partition? A reinstall is just an option and I need more disk space
View 2 Replies
View Related
Jan 28, 2011
what I did was: - have NTFS (450GB + 4GB linux-swap + 44GB ext3 with ubuntu 10.10 upgraded from ubuntu 10.4). Ntfs partition contains data only, no windows.
- either with partition magic or paragon I tried to resize the NTFS and since then parted doesn't like my partitions anymore, but Ubuntu boots and works just fine..
- I took the output from fdisk -l and decided to remove the swap partition - ubuntu won't boot saying it needs the swap (although it was never mounted and i deleted the swap while ubuntu was active)
I have the following output from fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code].....
**NOTE: Since the partitions are not on cylinder boundaries, using parted to recreate the partition table may not be good enough.. I don't have a backup of the partition table.
View 4 Replies
View Related
Aug 20, 2009
i have one harddisk /dev/sda it is partitioned as below:
/dev/sda1: /
/dev/sda2: swap
after the centos is installed, i want to create another partition /dev/sda3 to use all remaining disk space. i used fdisk. after fdisk, it requires reboot. The partition table has been altered! Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.The kernel still uses the old table. The new table will be used at the next reboot. Syncing disks.is reboot really necessary? is there any other tools which do not need to reboot?
View 1 Replies
View Related
May 6, 2011
I recently expanded the RAID on an iSCSI device which is shared out to a linux server. Fdisk correctly sees the new size but it won't let me add a third partition. It complains about overlapping partitions whenever I try to add it.If I 'remove' the partition, the overlapping error goes away. The interesting thing here is that when attempting to use the default sizes to setup the partition the printed screen shows completely different results (which I can understand is why its complaining about overlapping)
I'm not sure why its not accepting the cylinder sizes I want. Anyone have any ideas as to what's wrong here?
View 9 Replies
View Related
Jul 17, 2009
I have a Windows Vista machine on which I selected "utilize free space on selected drives" to install Fedora 9 temporarily. Now, however, I'd like to remove the Fedora installation. I've tried using fdisk from the Fedora 9 rescue mode on the install DVD, but I seemed to merely mess up the cylinder boundaries. When I boot from the DVD, before entering rescue mode it says that /dev/sda contains a looped partition, and asks whether I want to reformat it (completely removing everything on the drive).
How do I remove the "looped" Linux partitions? (I cannot login to Windows, so any GUI applications won't be any help.)
View 4 Replies
View Related
Mar 27, 2009
OS= Fedora 10
I have a secondary 250GB disk of which I created a 50G partition on to try and set-up an LFS system. I finished with the LFS system and now I want to destroy the partition and reclaim all of the 250GB. So i simply ran fdisk /dev/sdb and deleted the 2 Linux partitions ( one 83 and one swap). I then created a new partition as primary partition #1. fdisk appears to see the entire disk....I'm able to start at cylinder 1 and end at 30401 which is 250GB, however when i mount the partition it's shows as only 50G.....What the hell is going on here???
View 4 Replies
View Related
Apr 27, 2010
had trouble viewing partition table using fdisk, now realised i just cudnt view the whole table from Rescue terminal, please remove this thread, i can't find how ))
View 1 Replies
View Related
Dec 9, 2010
I have a physical drive of about 40GB, I want to create a partition of 10GB with FDISK on this drive.
View 2 Replies
View Related
Apr 24, 2010
I had a 500gb hard drive that I wanted to use on my Ubuntu system as a media storage drive. The drive originally had two partitions on it,one was a Dell Recovery partition and the other was a Windows Vista partition. Using the Palimpsest Drive Utility that comes with Ubuntu, I deleted both partitions,created a Ext3 partition using 100% of the space and copied my data to the drive. After I finally got fstab to load the drive, I found another problem. First of all, when Grub loads, two options it offers are:
Windows Vista (loader) on sdc1
Windows Vista (loader) on sdc3
Aside from that, 100% of the drive is not being used by the Ext3 partition.It is showing 434.6gb available on the drive. Fdisk is not showing any other partitions on this drive, so A) why are the Windows loader options showing up under Grub and B) why do I not have 500gb available?Here is a copy of the output fdisk -l:
Code:
Disk /dev/sda: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes[code]....
View 5 Replies
View Related
Oct 8, 2010
Mis-allocated 10g instead of 30g to /var/lib/mysql and realized mistake After Fresh Install and upgraded all servers. Using Slackware13.1, Xfce did some googling wondering if its possible to resize the above partition with fdisk. Read some things about gparted and wonder if it will work using Xfce.. i've never use kde or gnome. There is also mention of using live cd; I have no experience with any of the mentioned tools; just fdisk to partition and install. What is the best or simplest way to backup & restore; (I do have an empty sdb 160g but don't want to get into complicated raid or LVM setups right now because I still have to learn howto backup & restore do data to the point where I feel comfortable with it)?
Current setup: sda 160gb Hdd used 73.5 for following partitions: sda1 512m /boot; sda2 Extended Rest of Hdd; sda5 1280m /swap; sda6 8g /home; sda7 2g /; sda8 8g /usr; sda9 8g /usr/local; sda10 10g /var; sda11 10g /var/log; *sda12 10g instead of 30g /var/lib/mysql; sda13 10g /opt; sda14 5g /tmp Haven't configure mysql... so /dev/sda12 is empty except for system disk data the same goes for /dev/sda13 /opt & /dev/sda14 /tmp
View 14 Replies
View Related
Dec 28, 2009
After trying without success change from windows to ubuntu (dual-boot unsolved problems), I decided to try slack as I have seen that user to user support for slack is usually best oriented and faster.But I am having some problems in order to install slack because of GPT support. As I know its a bad idea to start to asking for help without speak what I have tried, lets to this first:
At first I tried just to boot from DVD and went through the install using the help inside the disk. It doesn't work because either fdisk and cfdisk that are suggested in help doesn't offer support to GPT.
After that first try i looked to:url
But also it suggest the use of fdisk. However, it suggested too that I could use another partition application and since I have the live cd for ubuntu, I tried to partition from there and use those partitions for installation.
At first I tried to format as ext4, but i discovered that slack still dont offer support to this format (at least the version that I downloaded).So I tried again but this time using ext3 as format to my / and /home and use the swap offered in the application for use as swap (duh!)But every time I try to install using the dvd it doesnt find my partitions with fdisk, only with the parted command I can see my partition table displayed correctly.However, every time I try to run setup it say that it didnt found and linux partition (swap also when i try to target).So this is my dilemma, I cant use fdisk, in the parted manual (url) it only says that it supports ext2 (not mention ext3) and also i dont find any command to use with parted to mark the partition as 82.I ran through this 2 other posts (url), but as I am still waiting for some update there I decided to ask it here hoping to discover that this is an easy problem.
View 11 Replies
View Related
Apr 29, 2009
It seemed that it would be simple enough: take the 'f' option in the expert menu of fdisk to put partitions in order after a gap had been created by a deleted partition and then make corresponding changes in /boot/grub/grub.conf because the root partition was shifted.
Well, it didn't work out that way. No matter what I try, I either see the error 15 at Stage1.5 or the error 28, which is even stranger (file does not fit into memory). All this before I even see a grub menu. It just does not get that far.
Does anyone want to take as stab at guessing what might have happened here and whether I have a chance at recovering without having to reinstall? I can provide concrete data, if anyone would be kind to give it a try. Hoping that this is a known problem and something can be guessed from what I stated here but I can be as specific as needed, just don't want to generate noise if there are no takers.
View 3 Replies
View Related
Jan 20, 2011
So the other day I got myself a nifty ThinkPad x100e. I immediately removed windows 7 started, and installed UNR 10.04.It has a 250GB hard drive, which I decided to partition, so that I can keep all my stuff on the new partition, and then a fresh format or install of the OS would be easier.After struggling to take ownership of my own damn partition after creating it and mounting it, I discovered a rather interesting problem. I KNOW the partition is empty, but when I right click and go to properties, it says that 10GB is already used? This is rather confusing to me
View 7 Replies
View Related
Apr 12, 2011
I have Ubuntu in one partition . The partition is about to be full..I have a spare partition which I thought could merge with the existing..But I guess it is not possible. I am slightly confused with the way linux stores the files. There is a root directory and within that there are boot ,Var,tmp and home..
Suppose I install an application from a package manager , I really do not understand where the path is ...Supose I want to store certain new applications in the spare partition , how do I tell the system? Also while installing it doesnt give a choice regarding the path ...All I see is a couple of files exracted and when it completes , it sits on the menu neatly. From a storage perspective how do you gain control? Say in Win , normally any package will ask for the path which you can customize..How do you plan the storage of files in Linux?
View 7 Replies
View Related
Apr 12, 2011
How can I make the Linux ping to show the requests 'time out' instead of omitting the output?
Just like the Windows version of ping.
View 3 Replies
View Related
Sep 8, 2010
Just ran into a problem involving mdadm, a disk which had been in a raid array, and an attempt to reformat. Basically, I went to reformat some partitions which had been in raid, and one of them threw the error andy@andy-desktop:~$ sudo mkfs.ext3 /dev/sdb5 mke2fs 1.41.11 (14-Mar-2010) /dev/sdb5 is apparently in use by the system; will not make a filesystem here! An attempt to umount revealed it was not mounted. lvdisplay and fuser did not reveal anything to me, so I just started looking around. I was graphically navigating /dev and noticed a /dev/md_d0 which did not look like /dev/md_d1 etc (it was missing a little arrow). I had not seen this notation before (my raid was md0), but figured it couldn't hurt to try stopping it.
andy@andy-desktop:~$ sudo mdadm --detail /dev/md_d0
mdadm: md device /dev/md_d0 does not appear to be active.
andy@andy-desktop:~$ sudo mdadm --stop /dev/md_d0
mdadm: stopped /dev/md_d0
After this, the partition formatted fine! I saw a lot of instructions including zeroing the partition and removing a logical volume, but the above was the only thing which worked for me! Just posted it in case it helps someone else. I know I've not been terribly technical!
View 2 Replies
View Related
Mar 24, 2011
Currently I have ubuntu 10.04 LTS as the only OS.I have two partitions one for ubuntu and it is ext by default for ubuntu's files.The other is empty NTFS. (yes, it is formatted in NTFS but I haven't saved anything yet on it).The problem is: I want to install win xp sp3 on this empty ntfs partition safely (without losing ubuntu).My friend told me ubuntu will be lost even if I didn't touch its own partition.
View 5 Replies
View Related
Dec 28, 2009
I have Win7. I partitioned my C: and made a empty F:(97gb). I want to install 11.2 on F:.
1) At Sys Ananysis I get; The partitioning on disk /dev/sda is not readable by partitioning tool parted... You can use the partitions on disk /dev/sda/ as they are. You can format and asign mount points on them. But you can not add, edit, resize, or removefrom that disk with this tool. I click OK
2) New Installation, Use Auto Config
3) Time Zone
4) KDE (same results with Gnome)
5) Partition Based. I go to Create Partition Setup.
6) In CPS I get
[Code]...
View 9 Replies
View Related
May 26, 2009
The partition is formatted to ext3, starting with block 1 on the drive. The mount point for /dev/sdc1 lists 0 files when doing `ls -A` `df -h` shows that the partition has 92MB used. How is this space being used, and how can I free it up?edit: I guess this isn't a newbie question.
View 7 Replies
View Related
Mar 21, 2010
I have a server running Fedora 6, which I wish to upgrade to Centos 5.4. This will be a lengthy switch over because of all of the apps I need to convert etc. As a precaution, I would like to keep my old Fedora running as multiboot. I have a boot partition, a fedora partition (root), and an empty partition for Centos.
Can I run the Centos installer and direct it to install onto the empty partition (I don't care if it formats it)BUT only add to the boot partition (not reformat it).? I don't want to lose the kernels/images on the boot partition, and from what I've seen most installers wipe out the boot partition prior to adding their own files.
View 3 Replies
View Related
Oct 28, 2010
When I load the disk I can view my backup drive properly but when I try to view my working drive it shows it as being empty. I also noticed that I had a 1 mg unallocated partition at the beginning followed by my ubuntu partition.
I then ran gparted in terminal and it did show the partition as having my system on it but I am not able to perform any tasks. No moving or resizing.
View 9 Replies
View Related
Feb 5, 2011
The swap partition says that it is empty. When I installed Slackware I'm sure that I pointed to the right place for the swap. Or does it not show any size because none of it is being used?
fdisk -l
Code:
root@Jacob:~# fdisk -l
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00051094
Device Boot Start End Blocks Id System
/dev/sda1 1 122 979933+ 82 Linux swap
/dev/sda2 * 123 2554 19535040 83 Linux
/dev/sda3 2555 91201 712057027+ 83 Linux
free -m
Code:
root@Jacob:~# free -m
total used free shared buffers cached
Mem: 3286 1303 1982 0 365 517
-/+ buffers/cache: 421 2864
Swap: 0 0 0
View 5 Replies
View Related
