Ubuntu Installation :: Mountall Fails With Kernel 2.6.32-22 At Lucid
Jun 5, 2010
I have upgraded at lucid from karmic.I have a little peculiar setup. My root partition is on sda3 and I mount the following:/usr -> /dev/sdb1/var ->/dev/sdb2/home -> /dev/sdb3(sdb isn't really a SATA disk but a PATA).When I boot with the new kernel 2.6.32-22 mountall stops with error messages that /dev/sdb2 and /dev/sdb1 are not ext2 file systems(this message comes from fsck.ext4??-It's using a ext4 program to check for ext2??)and cannot be mounted.Of cource those are normal ext4 filesystems which are being mounted without any problems with the last karmic kernel 2.6.31-21 which is what I am using)
View 2 Replies
ADVERTISEMENT
Jul 14, 2010
I am running Lucid Lynx kernel 2.6.32.24. Soon after the latest kernel update I noticed that Virtualbox would not launch when I clicked on the icon. I have searched the Internet for days, tried numerous possible fixes, over hours of effort, but can't get it working at all. Ubuntu Lucid runs great!! There are no errors just a few blinks of the hard drive indicator and nothing. Is there anyone out there that has seen this same issue?
View 9 Replies
View Related
May 13, 2010
i use synaptic manager to get the updates. I tried to get the required plugins like gstreamer 0.10 plugins bad. I downloads the all the required files but at last it show the following
E: Internal Error, Could not perform immediate configuration (2) on mountall
View 1 Replies
View Related
Nov 28, 2010
i recently got a server and it was going fantastically well, but just recently when i tried installing something using apt-get install .... ( i tried irssi, firefox/iceweseal, tightvncserver) it downloads asks for a questions i press y for yess then i get this error E: Internal Error, Could not perform immediate configuration (2) on mountall and then it doesnt install, this is really frustrating.
View 9 Replies
View Related
Jan 23, 2010
I have upgraded my ubuntu to the latest version a few days ago. Prior to the update I played a little with my partitions (transferred about 15GB from my windows partition to ubuntu partition).Up until yesterday everything worked. For some reason ubuntu will not load up now. After selecting ubuntu on grub i get the following msg: init: mountall main fsck process (574) terminated with status 3 mount of filesystem failed one or more of the mounts
View 3 Replies
View Related
Aug 7, 2010
I recently re-installed lucid on a computer which had a working ethernet printer queue, to a Brother MFC-5490cn. I installed the drivers from the ubuntu package archive and set up two printer queues, one for "dnssd://<ip-address>" and the other "lpd://<ip-address>/BINARY_P1". The first appears to recognize that the printer color ink is low, so perhaps there is some communication, but nothing ever comes out of the printer. The second queue appears to fail completely.
I vaguely recall that for my previous installation I used the package supplied by Brother, but that it was very difficult, since the package no longer matched the Ubuntu file layout and locations.
View 4 Replies
View Related
May 12, 2010
I run "aptitude update;aptitude full-upgrade" today, then I updated /etc/default/grub changing only the default boot line number, and I dully run update-grub, with no error messages. Now Kubuntu will not boot. The new kernel 2.6.32-22 is in the boot menu. When I turn the computer on, a blinking cursor appears on top line, column 8, and after a few seconds this cursor disappears and the screen is blank - my monitor indicates no video signal.
The failsafe 2.6.32-22 grub line does not boot either. I tried pressing Ctrl-Alt-F1, Ctrl-Alt-F2 etc. up to Ctrl-Alt-F10 to get to a text mode login prompt, but the screen remains blank and my monitor indicates no video signal. The workaround is to boot to kernel 2.6.32-21. The machine is Athlon XP, 2GB RAM, ATI Radeon 9600
View 1 Replies
View Related
Feb 23, 2011
Why is it that about 98 to 99% of the time my computer will boot to Ubuntu/Lucid just fine but on rare / random occasions after seeing the initial BIOS boot screen and initial cursor just after initial BIOS boot screens, the video will just go BLANK, i.e. does not boot to Ubuntu desktop ?
If I then do ALT,CRL,DEL sequence the SPLASH screen is displayed on the monitor and the system then reboots and then goes thru the complete boot process all the way to the desktop just fine.Why this occasional failure to boot completely to the desktop ?
View 9 Replies
View Related
May 5, 2010
I have just run an upgrade and noticed Kernel update 2.6.32-22 for lucid. Anything new in that? Anyone have any details?
View 9 Replies
View Related
Jan 22, 2011
I wonder if others have upgraded their Lucid kernel using the deb [URL]..repository. I have been using the repository for some time now without any apparent problems, and have gone from 2.6.36-1, through 2.6.37-10, and am now on 2.6.37-12.
All of these seem to work with no problems at all, but I am just wondering if other users can also report success, or if there are any trip-ups that might occur. I still keep updating the "standard" kernel from the main repos, ie 2.6.32-27, so I have that as a backup, but I'm just very curious about other people's findings.
View 2 Replies
View Related
Mar 5, 2011
I read recently about security flaws in the ubuntu kernel, and when I checked my kernel, it is 2.6.32-29-generic. I looked in synaptic, and I have the linux-generic meta-package - which should ensure upgrade to the latest kernel, and yet this is not being updated when I run update manager. There is a linux-image-2.6.35-25-generic, but the advice is not to install this directly (to avoid breaking dependencies, etc.), but to install the meta-package instead. Yet, the meta-package doesn't seem to be doing what is should do.
View 9 Replies
View Related
Mar 4, 2010
New kernel Fails to boot. video driver is current and I tried reinstall . The .19 Kernel works fine
View 2 Replies
View Related
Apr 30, 2010
Both in 32 and 64 bit I cannot boot kernel-rt. Message displayed: mounting none on /dev failed: no such device. Then get login message in text console, gdm cannot start.
View 1 Replies
View Related
Mar 23, 2011
Can I upgrade lucid lynx kernel from 2.6.32 to 2.6.38? If so, how do I do it from command line?
View 8 Replies
View Related
Sep 21, 2010
I recently got the Message, that i should do a partial System Upgrade. It included an update to Kernel 2.6.34. Since this update, i cannot boot with this kernel:
Code:
Mounting none on /dev/ failed...
i can still boot with older kernels, but many drivers including wifi and graphics drivers dont work there anymore.
View 3 Replies
View Related
Oct 26, 2010
I am using Ubuntu Lucid Lynx 10.04 (64 bits) in my Asus U30JC laptop (Core i3 M350, intel 4500MHD + nvidia 310M with nvidia Optimus, 4GB RAM). I am content with Lucid and I don't want to upgrade to 10.10 for now. However I read that the new 2.6.36 kernel has some good improvements, such as improving system interactivity while intensive I/O (such as copying large files), and improved energy management for i3/i5 processors (which I hope translates into more battery time, which is a problem of Ubuntu vs Win7 in my laptop).
I discovered I had 2 options: compile the kernel myself, or use the Ubuntu Kernel PPA (maintained by the Ubuntu Kernel Team). I decided to use the PPA, so I added it to my software sources and installed the generic"linux-lts-backport-natty" kernel (2.6.36-1).
Package installation went fine, and after reboot, I could log in to the desktop no problem. Everything seemed fine, but after a few minutes, the system freezes completely: mouse did not move, none of the indicators moved, even Ctrl + Alt + F1 did not work.Where is the log file where there might be a message related to the freeze? Do you think that the kernel developers would try to fix a bug that probably only affects people running the 2.6.36-1 kernel on a distribution that was not built around it?
View 1 Replies
View Related
Sep 21, 2010
The following is a subset of error messages I'm getting when trying to do "apt-get upgrade" or "apt-get dist-upgrade" on a machine running ubuntu server 9.10 amd64:
Code:
Preparing to replace linux-image-2.6.31-22-server 2.6.31-22.60 (using .../linux-image-2.6.31-22-server_2.6.31-22.65_amd64.deb) ...
[code]....
View 2 Replies
View Related
May 4, 2010
I upgraded to Lucid last night, and I'm getting this error when I try to run virtualbox-ose:
Quote:
Kernel driver not installed (rc=-190 Please install the virtualbox-ose-dkms package and execute 'modprobe vboxdrv' as root.
I try it, then I get:
Quote:
modprobe vboxdrv
FATAL: Module vboxdrv not found.
I have no idea what's going on. Can anyone help? The version of virtualbox is 3.1.6-dfsg-2ubuntu2
View 9 Replies
View Related
Jun 18, 2010
Recently, I installed a fresh 64bit Lucid Lynx on my Lenovo B450 laptop (previously on Mint8 64bit, based on Karmic). It's been really nice and speedy except for one thing - USB transfers to thumb drives and external hard drives were really slow (just like in the older Ubuntu releases). I had found some forum discussions on a fix to this by way of a kernel upgrade so I decided to go for it.
Went ahead and downloaded the kernel DEBs from [URL] and installed them. Voila! USB speed issue was fixed! Everything else seemed to work fine, except for some minor troubles with burning CDs and DVDs (I think I need to upgrade the drive's firmware - pretty bad situation as the update only runs on Windows).
However, the one 'bug' or 'annoyance' I noticed straight away was that my wireless wouldn't autostart after booting into the OS with the new 2.6.34-020634-generic (x86_64) kernel. I'd have to right-click on the NetworkManager icon on the notification tray and left-click '[ ] Enable Wireless' to flag the checkbox and my wireless would come right up and work ok (WPA2 at home, WEP at the office). Not a major problem, but this has been pretty irritating to say the least.
View 2 Replies
View Related
Jul 21, 2010
after upgrading to lucid lynx ubuntu doesn't boot with the new kernels 2.6.32-22-generic and 2.6.32-23-generic (also in recovery mode). But it's does boot with the previous 2.6.31-21-generic kernel. At the time i was hoping to wait it out, but a new kernel has come and the problem persisted. I've been trying to find a solution for this but somehow, amid lots of failed boot blank black screen threads, i didn't relate to any solution. The boot seems to go well until a pixelated logo appears (before the login screen), then goes to a blank black screen and there it stays stuck with no remedy. Looking into dmesg logs - albeit some differences between 2.6.31-21 and the newer 2.6.32-23 - the failed boot seems proper in both logs. In Xorg logs the differences are bigger but i cannot pinpoint a source for this problem.
View 2 Replies
View Related
Jul 30, 2010
When Lucid released, I upgrade the Karmic in my Thinkpad R61 using
Code:
One things that remains until today is that when I'm using latest kernel (right now 2.6.32-24), the compiz run very slow, make the whole desktop unusable. When compiz is killed and using metacity, the desktop is running in normal speed.
Fortunately I still had the Karmic kernel (2.6.31-20) and booting using this kernel, everything run normally.
I just wonder what cause the latest kernel make compiz become slow. Is there any leftover application that I had to uninstall (maybe it's like pulseaudio's problem above), or any missing library/application that I need to install?
View 9 Replies
View Related
Aug 10, 2011
each time i upgrade my kernel, my installation of lirc fails to work after the upgrade, and i have to re-compile (against new kernel) and install the lirc modules... which i do via something like:
Code:
sudo modprobe -r lirc_imon
sudo dpkg-reconfigure lirc-modules-source
sudo modprobe lirc_imon
after which all is well. this of course is a problem that DKMS should solve for me but it doesn't do it. also i get this message in my messages log:
[Code]...
View 1 Replies
View Related
May 8, 2010
I have noticed in the recent updates there is a Kernel update 2.6.32-22 but there is no restricted modules included. On my Desktop I have a Nvidia card which I installed the driver using the Hardware Drivers Application. As far as I know these Drivers are ether reinstalled or updated whenever there is a kernel update.
I also have a Laptop with a ATI Radeon card which I did run the updates and ended up (after the reboot) in low graphics mode, after a bit of work I was able to reinstall the drivers and get my desktop back so that's ok now.
I had this problem a few years ago with an old version of Ubuntu, kernel updates but no restricted drivers. The drivers turned up the next day and all was fine. I was just wandering if this is a known issue with Lucid or if anyone else has had this problem, It's been a couple of days since I noticed the Kernel update but still Restricted Modules. Oh I'm using Ubuntu Lucid 10.04
View 2 Replies
View Related
Jul 4, 2010
I am trying to update using Update Manager and I get this message: Failed to fetch "Failed to fetch [URL]..404 Not Found" My system is 64 days out of date now.
I have looked elsewhere for an answer and some others have had similar problems, but I have not found a reason for it happening, nor an answer. I wonder if anyone can help me please. I have been using Ubuntu for several months, can use the Terminal if I have the right commands to issue, but beyond that have limited knowledge of the system.
View 9 Replies
View Related
Feb 23, 2010
Finally updates are broken - I've been able to use my upgraded F12 system for some time, faithfully keeping up with f10, then f11. Just yesterday it finally broke:
Test Transaction Errors: installing package kernel-2.6.31.12-174.2.22.fc12.i686 needs 10MB on the /boot filesystem
It would appear that the most recent kernel update has broken the 10MB barrier initially set by the version I first installed (for the boot partition). Needless to say, I have quite an investment in this machine, and of course no time to back it all up and do a fresh F12 install. I am hoping someone out there can give me a bulletproof way to steal some space and expand the boot partition...
View 4 Replies
View Related
Feb 7, 2011
I boot into the CLI (by changing gdm.conf) and before it gets to the logon, it produces this error. So far, I haven't seen any effects but I'd like to get rid of it. Sometimes, I also get the error
Code:
mountall: plymouth command failed
I removed and reinstalled the Plymouth packages to no avail.. Anyone know how I can at least get rid of this error from appearing (like somehow changing a .conf file to not even try and "connect" to Plymouth)?
I did try the sudo apt-get update and all those other commands as listed on other sites. I went through the basic Google search so after the first 4 pages, I'm outta ideas.
View 5 Replies
View Related
Nov 6, 2010
I just upgraded from 9.10 to 10.04 and after the upgrade I am getting an exit code of 32 from mountall which is causing the system to not boot. This wouldn't be a big deal except I have no blank CDs and it won't boot from a thumb drive so I can't go in an modify the /etc/fstab myself.
View 7 Replies
View Related
Apr 19, 2010
There is a following convention: tar/zip/rar archive renamed to cbt/cbr/cbz is recognized by some application as a comic book file, so file managers can open it using corresponding viewers, which treat sequence of images inside as pages of a book. And nautilus used to recognize cbt files, making thumbnails from the first image in such renamed archive back in karmic. It still recognizes such file as "Comic Book Archive" after upgrade to lucid but fails to thumbnail it now. It tries to do that though, showing icon with the clock for a moment, but almost instantly fails, printing "Error loading document: File type Tar archive (application/x-tar) is not supported" to the console. When I am trying to open cbt file in evince (which is responsible for making document thumbs in gnome afaik) it displays exactly the same error message. Cbt files itself are completely valid and can be opened easily with Comix for example. Thumbs created in karmic are still displaying fine as well.
View 3 Replies
View Related
Jun 13, 2010
I have 12Gb of ram, a 24Gb swap partition (which appears active in the system monitor). When trying to hibernate, the screen turns off for 5 seconds, then immediately awakens and brings me to the login screen.
Here is my /var/log/pm-suspend.log :
Code:
Initial commandline parameters:
Sun Jun 13 11:28:30 PDT 2010: Running hooks for hibernate.
/usr/lib/pm-utils/sleep.d/000kernel-change hibernate hibernate:success.
/usr/lib/pm-utils/sleep.d/00logging hibernate hibernate:Linux ubuntu-beast 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64 GNU/Linux
code....
View 9 Replies
View Related
Sep 19, 2010
Recently (after the new version iPlayer was released I guess) I have been unable to download IPlayer content. On going to download, the IPlayer screen offers to install the IPlayer Desktop app, tries to install Air (already installed via Software Centre) and fails with a message like "A download error occurred. Try to download again?". Repeating just loops around to the same error message.
This happens on both my PC and laptop - both running Lucid. Have tried uninstalling the Iplayer app and Air, but still the same happens. Any suggestions, or do I have to wait for the Beeb to get it sorted?
View 9 Replies
View Related
