Ubuntu Installation :: Init: Mountall Main Fsck Process (574) Terminated?
Jan 23, 2010
I have upgraded my ubuntu to the latest version a few days ago. Prior to the update I played a little with my partitions (transferred about 15GB from my windows partition to ubuntu partition).Up until yesterday everything worked. For some reason ubuntu will not load up now. After selecting ubuntu on grub i get the following msg: init: mountall main fsck process (574) terminated with status 3 mount of filesystem failed one or more of the mounts
I have Ubuntu 10.10 installed. When I boot, this error message appeared "init: ureadahead main process 388 terminated with status 5" After that, another error message appear saying " *ERROR* render ring head not reset to zero"
Code: init: ureadahead main process (423) terminated with status 5 Ubuntu 10.10 lorentz tty1
lorentz login: The first line of the above shows up during boot before the display goes graphical. I can see it again (all of the above) when I Ctrl+Alt+F1 to access the first text console. Anyone know what is causing this, what problems can happen as a result, and what should be done about it? I moved from 9.10 on one machine to 10.10 on a new machine, so I don't know if it's a hardware problem or software. I am running 64-bit. I am not really seeing any problems happening besides the few scattered application and GUI glitches that are common with a new/migrated setup.
I keep getting this message as the first thing I see when I boot up. Afterwards, it displays the ubuntu logo and dots under it and then the screen blacks out, but the display lights act like its OK (wireless ETC). should I use a boot CD or something? The hard drive is fine and this happened after the computer blacked out during updates. i scanned the hard drive and its OK, according to the little scan thing you can do before booting up. I have a Compaq Presario V200. For specs, thats all I know.
I installed Lucid Lynx on my laptop a couple of months ago and for the most part everything was working fine. However, just recently the computer doesn't seem to be booting up at all. I start up the machine and then a black screen appears with the text: init: ureadahead main process (306) terminated with status 5 the (#) is different in some boot-ups
And the computer just hangs there. typing anything doesn't seem to help at all. I press enter and a new line just appears. I've left it there for hours and still no login screen.
So when I boot before the boot slpash this shows:ureadahead-other main process (320) terminated with status 5. It started happening completely randomly, is this anything I should be worried about and can I fix it?When I try and run ureadahead I get this:
brandon@brandon-laptop:~$ sudo ureadahead -v /var/lib/ureadahead/pack: No such file or directory ureadahead: Error while tracing: No such file or directory
I tried a dist upgrade from 10.10 and come across the below errors:
init: udevtrigger main process (352) terminated with status 1 init: udevtrigger post-stop process 357terminated with staus 1 init: udevmonitor main process (351) killed by erm signal
Quote: init: ureadahead main process (274) terminated with status 59 Starting up... There is a blinking cursor under the 'S' in Starting. It doesn't boot or respond to any escape combinations that I know. Several retries have yielded the same screen. I read the original post and a few comments here about ureadahead, but did not find anything related to my problem.
Last night i have upgraded my 9.10 to 10.04. After rebooting the system i couldnt boot linux.I got the following message:Starting up ...mount: mounting none on /dev failed: No such deviceinit: ureadahead main process (20 terminated with status 5After that message some 10.04 check disk started, but nothing good came out of it.
I have an Acer 9410Z laptop that I believe is running the Maverick Meerkat version of Ubuntu Studio. I just did an upgrade using Synaptic. I get to GRUB, but When I try to boot 2.6.35-22 (or the recovery mode or a real time kernel I had installed )I get the error:
INIT: Failed to spawn ureadahead main process. No such file or directory I then get the Ubuntu Studio splash screen for 2 seconds but then instead of a normal boot I end up in the terminal.
Can't seem to get past this error Doing a google search resulted with no good answers that pertained to this issue. Not sure what's halting the system from starting up, but it just sits and hangs at this forever. Only able to view the error when booting into single user mode - normal boot hangs after "enabling /etc/fstab swaps: [OK]"
When i boot my pc there is a black screen and then a message appears (initlymouth-splash main process(856) terminated with status 1) Some other times only this appears '' _ '' blinking (i don't remember how it is called in english,sorry) I hold Ctrl+Alt+Delete and then the screen where i choose profile comes up. I have 10.04 since they came out,and didn't have any problem except one issue with my belkin adaptor,but now i can't sync my iphone with rhythmbox or detect any flash sticks.
I have a project in which many processes run. p1,p2,p3.
->There are some .so files are included in some process when needed example ppp.so in process p1 (when ppp is needed and will go like a plugin) but it has a init () function how a process includes a init() function ?
->process p1 has main function i.e main()
->so evry process has main() right ?
what is the difference between init () and main () functoins. where is init () used and how many init() a process van have ?
i had a couple of things popping up during bootup and checked my boot.log and found this
Code: fsck from util-linux-ng 2.17.2 fsck from util-linux-ng 2.17.2 udevd[416]: can not read '/etc/udev/rules.d/z80_user.rules' fsck from util-linux-ng 2.17.2 fsck from util-linux-ng 2.17.2 [Code]....
I upgraded from Ubuntu 10.0.4 to 11.0.4 on a Dell Optiplex. Now, when I boot, I am given the option to boot into different kernels. I select "ubuntu, with Linux 2.6.38-8-generic", which results in a black screen that reads
Code:
init: plymouth main process (58) killed by SEGV signal and that's where it hangs. Pressing ENTER or hitting Esc does nothing. What steps can I take to recover my machine and all the files I used to have on it?
I just updated from 9.04 to 9.10 (it's a long story, and I still can't go beyond 2.30).The update got rid of WICD, which is what I used and installed network-manager. Network-manager was not working at all, so I uninstalled it again and installed WICD. I could connect perfectly and had no problems.However, now the computer hangs during boot, saying that init can't start network-manager. I assume that something went wrong during the uninstalling process, since it wasn't updated.
This is the message: init: Failed to spawn network-manager main process: unable to execute: No such file or directory.
So how do I update it or manually change it so it stops requesting network-manager?
My machine is dual booted with Fedora 14 and RHEL 6. (I have only installed Red Hat because I am studying for RHCE). Just now I tried to install the Banshee player on my Red Hat OS. I ran various scripts inside the directory to see what really happens and after I ran the 'Makefile.in' file my terminal froze. It displayed '/bin/ not found'Then i restarted my computer and I got the following messages:
init: Failed to spawn readahead-collector main process: unable to execute: no such file or directory init: Failed to spawn rcS main process: unable to execute: No such file or directory init: Failed to spawn readahead main process: unable to execute: No such file or directory
[code].....
I tried run level 1 and run level 3 but I get the same error messages.
I booted up my laptop and the boot sequence got stuck at the boot splash screen (plymouth). I did an esc and I saw a failure message, the error I remember in my panic mode is: fsck terminated with status 8
I rebooted, got the same message. Rebooted again and this time, to my relief, it worked.
1) What happened, should I be concerned? Not sure why it worked after 2 reboots.
2) Is there a possibility this could happen again?
3) Are there any boot log files I could look at?
4) Is there anything I can do to fix this? Or a check of some sort?
I'm using Ubuntu 10.04 on a Dell Studio 1535 laptop. No dual boot. The disk is partitioned and I've got my /home folder on the other partition for situations like this.
I have a Dell Mini 12 running what I think is Ubuntu 10.10 Netbook Remix. It won't boot all of a sudden, saying 'No init found'. I've been through [URL].. which is VERY close to my problem but I cannot get Disk Utility to work when running off my Live USB. Asking it to check the hard drive results in it telling me the filesystem is 'not clean'.
I have recently upgraded 9.10 to 10.04 through the alternate CD. However, each time when I boot my system, post upgrade, I receive this error: INIT:failed to spawn spreadahead main process: unable to execute: No such file or directory After that it waits for a long time to show the desktop.
I am working on a light version of linux for no particular reason other than to see how small I could make it. I was wondering if INIT was necessary, or if I could perform all of the INIT-related tasks (fsck, unmounting, etc) by hand/bash scripts?
I do not need multi-user functionality (Or much of anything for that matter). I started off with a Gentoo base 2.0.2 Install with kernel 2.6.38.
Is there any difference in cpu usage for process in init.rc(runs automatic when boot is happened) and manually running process. Will these both have same priority by default...?
When I restart my computer the following messages come up: __________________________________________________ _ init: usplash post-start process (2221) terminated with status 1 * Stopping ClamAV virus database updater freshclan
i use synaptic manager to get the updates. I tried to get the required plugins like gstreamer 0.10 plugins bad. I downloads the all the required files but at last it show the following
E: Internal Error, Could not perform immediate configuration (2) on mountall
I installed slackware 12.1 from files i downloaded and converted to cd (images). There are six "disks" i downloaded from the slackware site and converted to images via a homemade .cmd in windows xp and then burned using imgburn.
I partitioned my hd (canibalized from an acquaintance's emachine and connected it to my desktop (1G ram, 2Ghz processor). Booted from disk 1 and fomatted the 80G HD for 2 partitions of linuxswapable at 2G apeice and 2 partitions of bootable linux. (Because i want to try another distro later). I ran the setup installing most everything and all seemed to go well. After i exited setup and restarted, it identifed the cd/hd as normal and then went into some sort of recovery mode with the emachine logo call pcangel, after which it tells me.
STOP: c0000021a (fatal system error) The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000 0x00000000). the system has been shut down. So, is this indeed an xp error message, and if so, why am i getting it after formatting everything?
I have upgraded at lucid from karmic.I have a little peculiar setup. My root partition is on sda3 and I mount the following:/usr -> /dev/sdb1/var ->/dev/sdb2/home -> /dev/sdb3(sdb isn't really a SATA disk but a PATA).When I boot with the new kernel 2.6.32-22 mountall stops with error messages that /dev/sdb2 and /dev/sdb1 are not ext2 file systems(this message comes from fsck.ext4??-It's using a ext4 program to check for ext2??)and cannot be mounted.Of cource those are normal ext4 filesystems which are being mounted without any problems with the last karmic kernel 2.6.31-21 which is what I am using)
