Ubuntu :: 10.04 RC Desktop I386 ISO Defaults To Installation?
Apr 26, 2010
I downloaded the ubuntu-10.04-rc-desktop-i386.iso file and burned it to a CD - i.e. what I thought would be a standard Ubuntu Live CD experience. Imagine my surprise when:On a black screen, there was a new (small) window on the left and a (small) meaningless stick figure on the right at the bottom of the screen, and after a while I got the error window entitled:
Installation failed
The installer encountered an unrecoverable error.
A desk top session will now be run so that you may
investigate the problem or try installing again.
Since when is installation (with no user interaction) a default when using a (Live)CD ISO image of any Ubuntu RC or otherwise?My only purpose was to boot up into the Live CD environment - but that was not only not presented as an option (normally there is a 30 second countdown) and the usual default is to boot up into the Live CD environment.This was not the case with the RC! Why not?
View 1 Replies
ADVERTISEMENT
May 1, 2010
I want to make a live-USB containing among others both Ubuntu desktop i386 and Ubuntu desktop AMD64. How do I go about this? I tried using unetbootin, first adding i386 and then amd64, but that failed. My computer with an athlon II did manage to boot, and showed it had booted into the 64-bit version (ram shown was 3.9 GB, i386 goes to about 2.7 I think), my wife's computer with a pentium 4 did not manage to boot, got to a black screen. I think this is because casper has issues, being overwritten (I'd seen something to that effect somewhere), and thus only the latest version added being booted (in this case amd 64).
I'm under the impression that the startup disc creator included won't help, nor won't the multicd.sh script, so how do I circumvent the issues?
View 4 Replies
View Related
Jan 8, 2010
im trying to install ubuntu 9.10 desktop i386 version, but i simply cant do it! I have tried for hours now. I boot my computer, the cd-room boots, i choose language from the list and press install ubuntu, after that i see the ubuntu logo blinking and in few minutes it gets black and shows "Input Not Supported" and its just bumping around the screen! I had a feeling that maybe my monitor (ASUS) does not support ubuntu so i tried with a very old syncmaster monitor, but similar message appeared! What could be the problem?
View 1 Replies
View Related
Apr 21, 2011
I installed the Elegant Gnome theme/package and I uninstalled it after about a week of use. Even after reverting back to the ambiance theme, or other themes, I've noticed that some elements of the Elegant Gnome theme have remained (e.g. the panel color and icons in Chrome or after right clicking and the system font).Is there a way to restore the Gnome defaults or Ubuntu system defaults so that everything is as it should be?
View 2 Replies
View Related
Mar 2, 2011
The link to ubuntu-10.04.1-desktop-i386.iso.torrent is not found on the [URL] ative-download page. The 10.10's are ok.
View 2 Replies
View Related
Aug 21, 2010
I was following a simple tutorial on how to program and compile a hello world program using assembly when I got this error;Quote:ld: i386 architecture of input file `hello.o' is incompatible with i386:x86-64 output.The tutorial told me to make two files;Quote:hello.asmsection .data;section declaration
msg db "Hello, world!",0xa;our dear string
len equ $ - msg ;length of our dear string
section .text;section declaration
[code]....
View 3 Replies
View Related
Aug 13, 2011
I installed sqeeze on a netbook. Having no optical drive, I created a usb install disk with unetbootin on a laptop running Squeeze stable and the "Debian 6.0.1a DVD 1" iso. Much to my suprise it installed KDE. I expected, and wanted, Gnome. At the tasksel section I checked off "Graphical Desktop Env", "Laptop", and "Standard Sysytem Utilities". I found a similar post regarding this: viewtopic.php?f=17&t=60040 But in this case the OP installed with a netinstall iso and concluded a faulty mirror was the cause. This doesn't make sense in my case as I was using a DVD image which contains, afaik, Gnome, XFCE, and KDE
There surely must be a way to explicitly choose which desktop env. one wants installed. I realize this can be done by doing a base install and using apt-get; but I'm thinking there must be a simpler way using the installer. I tried the "Expert" install and only saw the generic "Graphical Desktop" option again. I figure I must be missing something somewhere. Also, can I get apt-get to recognize my unetbootin stick as a source to fetch from? I tried apt-cdrom and different entries in sources.list but I can't figure it out. It seems wasteful to me to download hundreds of MBs of packages from a mirror when I have them locally.
View 8 Replies
View Related
Jul 8, 2010
10.04 and Nvidia video card.
This sequence:
sudo apt-get purge nvidia*
sudo apt-get install nvidia-current
sudo update-alternatives --config gl_conf (not sure what to choose, I just pick an option at random)
sudo ldconfig
sudo nvidia-xconfig
and then restart gets everything apparently working correctly, with my desktop spread across two monitors.
However, after two or three computer restarts, it 'forgets' and defaults back to low graphics mode and all the common error messages mentioned in multiple threads here, with my second monitor just duplicating the primary monitor.
Under System-Hardware drivers it says Nvidia_current is activated but not in use, regardless of whether it starts normally or in low graphics mode.
What's up? It's a pain to have to go through that sequence over and over again, and then restart my computer every two or three days, and leaving the computer on 24/7 isn't an option. power saving and all that.
View 4 Replies
View Related
Oct 11, 2010
I've upgraded my netbook from Lucid to Maverick, and have a couple of questions:
1. My start-up apps don't appear to be running. In particular Tilda and Gnome-Do don't start up - and removal of the "Alt+F2" shortcut to run programs makes it hard to start them manually.
2. I'm still getting the old launcher as the desktop, with no search box in the top bar. (In many respects having the old launcher isn't so bad, as I'm Not Friends with the new Unity side-panel.
View 1 Replies
View Related
Aug 19, 2010
I'm running the installer, and "Guided Partitioning" selected partition sizes I'm not completely happy with. I selected separate partitions for /home, /var, /usr, /tmp etc, and by default it gave me only 5GB for the /usr partition. I'd like to take some space away from /home and give it to the /usr partition, but I can't figure out how to do that using the menu options available.
View 7 Replies
View Related
Jan 18, 2011
I installed the nvidia driver from the vendors homepage. But since it does not support regulation of brightness (and the display is that bright that I want to downlevel it), I wanted to go back to the default display driver which is the nouveau driver.So I uninstalled the nvidia driver and then I realized that I didn't make any backup of the xorg.conf file prior installing the nvidia driver. Shame on me, yeah.Now when the x-server started, it couldn't find the nvidia driver. Okay, fair as it was removed. Next to that my keyboard becomes unresponsive. That's really aching as I can not switch to a text-based console any longer.I'm able to boot into initmode 3 by editing the kernel parameters in the boatloader. I'm also able to edit the xorg.conf with vi in the shell then and start the xserver to test things by calling xinit.
I already tried to recover a bit from this situation by removing the references to the nvidia driver and replaced it with some information I could find on the nouveau homepage - but no luck so far, keyboard still freezes and login window does not appear. I could take a look into the xorg.0.log which warns me about the keyboard getting disabled but I do not really understand why. Next to that I find some other additional information. My computer experience is quite okay, but I'm somehow new to Fedora, I started half a year ago with Fedora 13 on my other laptop which worked like a breeze.
I wondered where I can find information about how to configure the xserver in the default configuration, if there is some reset functionality or so, that brings me back to installation defaults. Those worked ok for the nouveau driver. Unfourtionatly I was not able to gather the correct package name that would probably had helpded me by removing and installing it again.Next to fixing my setup, I had another idea as this is a quite new install to just re-run the install again on to that machine. Is this possible with keeping the files in my homedir?
View 9 Replies
View Related
Feb 8, 2011
I just finished reinstalling Squeeze on my little netbook using the debian-6.0.0-i386-netinst.iso and accepting just about all defaults, including that for the Desktop environment in tasksel. It appeared upon rebooting that, much to my surprise, KDE had been installed -- not the usual Gnome. Of course, there's nothing inherently wrong with KDE, but changing the familiar behaviour of the Debian Installer (i.e. to install Gnome) without warning seems a bit much to this long-time Debian user...
View 11 Replies
View Related
May 3, 2011
I noticed that in Fedora 15 Beta when you choose a minimal install then add ONLY the defaults of the "GNOME Desktop" package, you will get this error: gnome-desktop3-3.0.1-2.fc15.x86_64 has a required package:
system-backgrounds-gnome
When I look for gnome-desktop3-3.0.1-2.fc15.x86_64 it is not on any installation menu list. I prefer gnome, but installed KDE and that worked. Any ideas of getting gnome to work?
View 3 Replies
View Related
Feb 18, 2010
I recently upgraded my hardware and installed 32-bit Karmic (well really Mint 8 ) before realizing I would probably have gotten better performance from the amd64 architecture. Is it possible to convert an i386 system to amd64? Is it a good idea? Will there be a lot of problems afterwards? Is it easier to just backup home and etc, install a clean 64-bit system, then restore settings from backup? If I do convert the system, how do I do it? I thought I might be able to just install a different kernel but I can't find an amd64 kernel in the repositories..
View 8 Replies
View Related
Mar 11, 2010
I have an old laptop, on which I want to Install kubuntu 6.06.1
So, I downloaded kubuntu-6.06.1-dvd-i386.iso
Unfortunately, for some strange reason the file has been corrupted. Fortunately, the corruption is limited to several bytes.
I know this because I downloaded the torrent and "checked" the file hashes. A total of 5 "pieces" are missing.
Unfortunately, there is no one to seed. None! I am the only guy sharing 99.8%.
share this DVD? I just need to download 5 MB (1 MB for each piece).
View 2 Replies
View Related
Sep 15, 2010
I just upgraded my box to ubuntu 10.4 from 8.04, as usual fast and without complications.I want to use the i386 kernel instead of the i686 (2.6.32-24) with aptitude and synaptics I have downloaded and installed but when I restart it jumps directly to gdm, no grub to choose, I also try to unistall the i686 version trough synaptics, as I did in previous versions , but I couldnt find any linux-i686 entry
View 3 Replies
View Related
Jul 2, 2011
I have installed Ubuntu 8.10 from ubuntu 8.10 i386 Desktop DVD.Now I am trying to upgrade to Ubuntu 9.04 by update manager. but it always say upgradation fails. what to do now. how can i upgrade it to 9.04 and so so upto 11.04.
View 2 Replies
View Related
Apr 30, 2010
Halfway through upgrading from 9.10 to 10.04 (i386 desktop) using the Alternate CD, you are prompted to insert "Ubuntu 10.04 LTS _Lucid Lynx_ - Release i386 (20100429)".Luckily, I'd already burnt a full installation CD so swapped this and the run continued for a moment. It then asked for the Alternate CD again (20100427.1).If you haven't got a full install CD handy before you start, you may not be able to complete the upgrade.
View 9 Replies
View Related
Apr 30, 2010
Fails to insatll from a SD card using USB, it looks for a CD rom when there is none... will not allow me to go on without a CD rom? i need to encrypt my drive? why don't the normal cd do this just like the other linux sysetems? hide it if you have to.
View 1 Replies
View Related
Oct 17, 2010
I got the xubuntu-10.04-desktop-i386.iso file in a folder with WUBI but it still keeps trying to downlaod the amd64 version. how can I stop this?
View 6 Replies
View Related
Oct 20, 2010
When I complete the download of the platform on USB it says error in downloading "casperfilesystem.squashfs." I go ahead and try to go through the steps of running unbunt, since it download on the USB, then at the last moment it says cannot mount /dev/loop0 (/cdrom/casper/filesystem.squashfs)
View 1 Replies
View Related
Jan 12, 2011
osdlyrics_0.3.20100604-1~lucid1_i386.deb Ubuntu x86 32 bit deb package for Ubuntu 10.04 or later wont install. I'm running ubuntu 10.4 64bit. My question is why you can't install 32bit programs on a 64bit system? If you can then how do I do it? 64bit should run 32bit due to the resin that a 16bit system ran 8bit games/programs. I know in window 7 you can install 32bit programs on 64bit system.
View 2 Replies
View Related
Mar 2, 2011
im trying to install wine1.3 and i need to upgrade libc6-i386 so i let apt-get try to do it, but it hangs at unpacking the deb, normally it has no problem no error occurs just sits there like its a huge deb but its only 3mbs. ive tryed using synaptic and doing the following.
sudo rm /var/lib/dpkg/lock
sudo dpkg --configure -a
sudo rm /var/cache/apt/archives/lock
sudo apt-get check
sudo apt-get clean
[Code]..
View 1 Replies
View Related
Jul 14, 2010
every time i try to install skype on ubuntu it gives me this message Error: Wrong architecture 'i386' is there any way to fix it?
View 3 Replies
View Related
Aug 17, 2010
Im trying to install Ubuntu server for DVD/CD iso.The mdsum is correct: md5sum ubuntu-10.04-server-i386.iso ives 15342636441181f7a19c65984b44e24c ubuntu-10.04-server-i386.isoI have tried it a number of times and the same sequence re-occurs:The first error occur during �Installing the base system�First sign is a red screen displaying a �Debootstrap warning� After a few re-tries the system defaults back to the Installer menu:I then select to post the debugger logs to a web server that starts:the first sign of problems in syslog are:
Aug 17 09:35:35 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Aug 17 09:35:37 hw-detect: Loading PCMCIA bridge driver module: i82365
Aug 17 09:35:37 kernel: [ 268.912151] Intel ISA PCIC probe: not found.
[code]....
View 5 Replies
View Related
Jan 17, 2011
root@amudo-linux:/home/amudo/avg85flx-r863-a3205.i386# ls
bin ChangeLog conf data doc init.d install.sh lib README script
root@amudo-linux:/home/amudo/avg85flx-r863-a3205.i386# ./install.sh
There is running avgd deamon. Stop it first, please.
Installation aborted
root@amudo-linux:/home/amudo/avg85flx-r863-a3205.i386#
I want to install AVG8.5. but I do not understand to stop avgd daemon. What should I do?
I use Ubuntu 10.10
View 1 Replies
View Related
Apr 28, 2011
Here is a copy of what shows on by screen (I used sudo -s because I thought it might be an environment issue). Not sure what to do here Bash seems to be installed and if I run bash I get no errors. I did just upgrade to 11.04.
Code:
root@jackie-Latitude-E6410:~/Downloads/SametimeStandardClient/sametimeclient.standalone/Linux# dpkg --force-architecture -i sametime-connect-8.5.1.i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
dpkg: regarding sametime-connect-8.5.1.i386.deb containing sametime-connect:i386, pre-dependency problem:
sametime-connect:i386 pre-depends on bash
[Code]...
View 1 Replies
View Related
Apr 29, 2011
Trying to install a newly downloaded DVD image of 11.04 this morning on my T410 LT (4 core/4GB). The image MD5'd okay, burnt it, stuck it in the drive, rebooted, asked me about install lang = english, select install ubuntu, get subject error and it falls into initramfs prompt.So, I put my 10.04 install CD in and guess what, it works!
I will repeat what I have already posted in the another forum, and I understand install is a difficult part of the system, but there is always some glitch or another just trying to start install with ubuntu. Once it runs, if it run, I normally see few other problems after that.
View 2 Replies
View Related
Apr 29, 2011
The MD5SUM file on the ubuntu-11.04-alternate-i386.iso disc is wrong. It has an incorrect checksum of 2 files and 18 that are missing or have incorrect names. I'm checking these from a Windows box but that really shouldn't matter. The two incorrect hashes are:
Code:
543f56d91223039621db4cf3b50dde37 ./install/netboot/ubuntu-installer/i386/pxelinux.cfg/default
0ae389801f547ccf19bd6f63c0ab3b7d ./install/netboot/ubuntu-installer/i386/pxelinux.0
I'm showing an MD5 of D41D8CD98F00B204E9800998ECF8427E for both files...
These are the files which appear to be missing or misnamed (the ones I checked appear to be on the disc but are named incorrectly):
Code:
./pool/main/x/xserver-xorg-input-synaptics/xserver-xorg-input-synaptics_1.3.99+git20110116.0e27ce3a-0ubuntu12_i386.deb
./pool/main/x/xserver-xorg-video-nouveau/xserver-xorg-video-nouveau_0.0.16+git20110107+b795ca6e-0ubuntu7_i386.deb
[Code]...
View 1 Replies
View Related
Aug 4, 2009
Seven times I was downloading the fedora11 disc1 i386 iso and the sha256 checksum was bad. When I try ftp.belnet.be mirror I can get the correct checksum. I understand the copy process between mirrors probably was errors. Becarefull friends. This bad iso aborts the installation process.
View 4 Replies
View Related
