After troubleshooting the lockup problem on my installation of Lucid, I want to wipe the thing and reinstall. I have an integrated Broadcom wireless chipset that I want to integrate the firmware into the new Lucid install disc, along with Nvidia's 180.06 drivers for my GeForce4 440 Go (yes, it's an old machine). I need to build this from XP though, since my current Lucid install is to the point of unusable.
Is there any good way to do that? With XP builds you can use nLite to slipstream just about anything into a clean XP install, including all available hotfixes, extra drivers and a few applications. Is there a similar program for building Ubuntu installs that can do that as well? Also, if I download a new ISO of Lucid to build from, will it have all the current updates integrated, or it be up to me to do it? Edit: just realized I posted this under the wrong topic.
I have a question that I can't find anything about online. I have spent the last few months creating and customizing a Kubuntu OS for my company and we want to install it on roughly 45 computers (all different models). Is there a way to save my creation to a cd so it can be installed on another computer?
I know about creating an image of the HDD but what I want to do is create what you would get in the store from Microsoft. A complete OS on a CD, ready to install with all of my configuration changes already setup.
When I build the kernel 2.6.30 source, the rpm package is very big and needed or root filesystem 800-900 Mb. I use "make rpm" as described in Configure, Build and Install a Custom Linux Kernel - openSUSE.
We have an appliance with image being installed from CD/DVD installation This appliance image is based on CentOS 4.7 kernel/installer/etc. Everything works fine, we ship this product for about 2 years. Recently I had to move it (port everything) to CentOS 5.5 Everything went fine and it works fine except one minor thing )) We can't install it from CD/DVD image yet. Actually it start fine, finds kickstart file, creates partitions correctly, copies install image to harddrive, but fails the next step when it tries to install RPM's
The message we get:
Quote: the file termcap-5.5-1.20060701.1.noarch.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source. If you exit your system will be left in an inconsistent state that will likely require re-installation"
I want to reinstall lucid for various reasons, so I downloaded the file, burnt it to cd and then booted with the cd in. An ubuntu screen started then went to a black screen with the message:(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/output errorCan not mount /dev/loop0(1cdrom/casper/filesystem.squashfs) on //filesystem.squashfsthen no further progress.
When you install Ubuntu, you will typically install a complete desktop environment. It is also possible to install a minimal set of software (just enough to boot your machine) and then manually select the precise software applications to install. Such a "custom" install is usually favoured by server administrators, who prefer to keep only the software they absolutely need on the server.
I have never personally noticed any sections in the install to allow you to do a custom minimal install, is this possible in Lucid?If so how, or do I need to download just a mini install iso?
If you can access Suse Studio here is thlink to the buildLFS Host - SUSE GalleryGoogle hasn't been friendly and neither has a search on these forums, I don't know which man to read so a finger in the right dirrection (preferably not the middle) would be nice as far as that goesRight now the yast live installer trips up at %84 while saving the boot loader configuration and displays a popup that says �An error occurred during initrd creation. /sbin/mkinitrd: illegal optionI then press enter to acknowledge the message and the installation continues without a hitch.
When I go to boot up (no other os installed) grub says it cant find the file initrd-2.6.34.7-0.5-defaultIf you boot the live cd again you can mount the boot partition and you�ll find a broken symlink called initrd that islooking for the missing file above.Like I said above, if it an obvious fix, all I need is some direction, I don't mind reading. (been doing that all day)If you need more specifics Id be happy to supply, I'm just not sure whats relevant and don't want to bloat the post.
I've been having a problem with my main user account ever since I installed Lucid where after I enter my login credentials, the desktop always freezes. Since I've been having this problem, I created another user and have been able to login fine with this one. I have determined that the problem is with compiz, so I want to completely reinstall compiz, including any configuration settings. However, there seem to be a number of packages that go with compiz so I'm not sure what steps I can follow to accomplish this.
I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
i just installed nvidia driver 96 manually and after reboot pc wont boot, nothing no output , no beep even if removing ram but fans still work and lights too, did a cmos reset but still got the same result,
I followed The Perfect Server - Debian Lenny on howtoforge website. (Just changed some instructions to fit Sqeeze) * I did not install Control Panel, just software like LAMPP & Mail Servers - SMTP(SSL+AUTH) + POP(SSL) + IMAP(SSL).When I installed PHP it installed it with Suhosin Patch, but that patch was giving me a headache with some web scripts that I write for myself. So I decided to compile it for myself. Here is how I done it:
I have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap sda2 - / sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
I am trying to build a custom kernel but I couldn't. Here are the steps to reproduce it: 1. Set Up an RPM Build Environment as its is explained in [URL] 2. Then follow the instructions in [URL] 3. When I try to install the kernel source rpm I get the following error:
[matias@Centos ~]$ rpm -i [URL warning: user mockbuild does not exist - using root warning: group mockbuild does not exist - using root . . . warning: user mockbuild does not exist - using root warning: group mockbuild does not exist - using root error: unpacking of archive failed on file /home/matias/rpmbuild/SOURCES/linux-2.6.18.tar.bz2;4ba24901: cpio: read
scanning them with Avast! and Malwarebytes Anti-Malware or by running registry cleaners like Ccleaner.However, I think it would be cool to have a Live system that I could boot from my flashdrive that I could have programs installed to do all this with.It would be cool if I could use Puppy Linux, since it loads and runs from RAM, which gives a huge speed boost when compared to running a live version of a distro like Ubuntu, but I don't really know my way around Puppy, or how to make my own "pupplet". Also, from what I could tell, Puppy Linux didn't have a package manager like Pacman or Aptitude.Here's a list of programs I would like to have a Linux alternative to use:-Avast! Anti-virus-Ccleaner (registry cleaner)-Malwarebytes Anti-Malware/Superantispyware (malware/spyware cleaner)-Perhaps also a Defrag program like Defraggle
I used make-kpkg to build the 3.0.0 source debian wheezy on a dual 3.4GHz Xeon/L1-16k/L2-1mb/800Mhz bus with 4GB PC2-3200 ECC ram and Ultra 320 SCSI, using CONCURRENCY_LEVEL=4 (2 hyperthreading cpus=4 cores). The build was slower than molasses in January! Top reported cpu usage total between 10% and 25%. Why won't the build use the amount of machine it has available. One footnote: I wasn't using swap space. It literally took over an hour to build the deb kernel package.
My notebook from 2003 is at least three times faster building the 3.0.0 debian kernel source. Is it possible that this might cause improvement: make -j4 KDEB_PKGVERSION=version deb-pkg
Could amd64 vs. i386 have some influence? Could the small processor caches on the XEON cpus have an effect. The 64-bit machine absolutely flies doing everything else. I'm miffed! I've used debian since woody, although I am not an expert, but I'm no slouch!
I'm new to linux and recently installed openSUSE 11.1 on my Lenovo Thinkpad SL500. So far it's great... only problem is the hotkeys and brightness control don't work. Digging around online I found this "experimental" driver that purportedly works fine, but I have no idea how to compile, install, or otherwise use it. Here... tetromino's lenovo-sl-laptop at master - GitHub I'm not sure what to do with the makefile and C file provided. For example, what do I do with this instruction...
"To enable the brightness control, load the module with the "control_backlight=1" module parameter (i.e. insmod lenovo-sl-laptop.ko control_backlight=1 )" I know someone on here will be able to explain how to do this in a "computer engineering for chemists" language! I'm comfortable enough working in the terminal with commands, but have found no real straightforward explanation of how to do so (only "programming" experience is MATLAB m file writing).
I just rebuild the kernel for slackware 13, everything works, but root file system which is ext3 is mounted as ext2. Normally I've build ext3, ext4 and so on as modules, not in the kernel... but if I do this, then the kernel mounts the file system as ext2, which is build in the kernel. I also modified rc.modules so I can make sure that ext3,ext4,jbd are loaded, but it doesnt work.
I was wondering if theres a way to make custom themes in lucid. when i had windows Xp i used High Contrast 2, is there a way to make it similar in ubuntu?
Just spent three whole days barking up the wrong tree, solving Fedora 11 and Fedora 12 boot failures because the correct hypothesis was illogical: installation did not update/modify the initrd.
The first couple of times I installed Fedora 11 on the HighPoint Technologies RocketRaid 2640x4, the installation inserted my "custom" driver module (rr26xx) into the initrd, permanently, so that the system booted off the controller card for which the custom driver was inserted. (I yelled about this success in this thread: [url]
My most recent installs of BOTH F11 and F12 on the RocketRaid failed to properly set up the boot. It turns out that the "rr2640" module I "slipstreamed" into the installation process was *NOT* permanently added to the initrd by anaconda. (F12 gave me "no root device found boot has failed, sleeping forever", on boot; F11 hung also, without such error, I presume, during the init script execution). Because of limited resources and time, I only know for sure the module was missing from the F11 initrd, and am ASSUMING the same was the case with F12.
The only difference between the successful installs and the ones with failed boot is that the successful installs were made on a single-drive (JBOD) mode on the controller; whereas, the failed ones were placed on RAID 5. But, AFAIK, the created logical device for the card is "/dev/sda", in both cases, and the kernel can not distinguish between the two cases (or can it?). Thus, the inconsistency cost me a lot of time, and is still inexplicable to me.
Question: What is the best way to deal with custom drivers, today? There are custom spins, and many tools, like isomaster. Stupid question: Is there a way to modify the initrd inside an installer ISO -- be it for CD/DVD/USBboot drive -- beefing the init RAM disk with whatever modules you'd like, for the boot process (using, say, isomaster)?
And what makes anaconda understand that a module must be added to the initrd ? How can one force anaconda to do so?
How does moving to dracut as the initrd tool affect any/all of the above?
I would like to run a few custom commands when booting: "xinput" to calibrate the touchscreen and a couple of "setkeycodes" to make special buttons responsive.
From within a session I need to do "sudo setkeycodes [etc]" - without root access there's a "couldn't get a file descriptor referring to the console" error message.
Ideally these commands would already be operational at the login screen, and without requiring entering a root password every time.
I've put the commands in an otherwise empty /etc/rc.local but this does nothing. Other posts mention bootscript.sh but I don't get how this is used; and the best way to do this seems to have changed between versions - so what's the proper Lucid way?
I have a server running Ubuntu 8.04. I'd like to use the vm-builder utility (a.k.a. python-vm-builder, vmbuilder and ubuntu-vm-builder) to build a virtual machine image for KVM to run on this server.
I want my virtual machine to run Ubuntu 10.04, but I can't do that because the vm-builder utility only recognizes Ubuntu releases before and up to the version of Ubuntu on which the utility is run.
I'm wondering if there's a way around this without having to upgrade my server to Ubuntu 10.04, which is not really feasible at the moment. I tried installing a more recent version of the vm-builder utility using the Lucid package, but it won't install because of unmet dependencies.
Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W
My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}
Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels
Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.
This thread describes how to build a 2.6.34 kernel with load-balancing to cut down the number of load balancing wakeups. Running powertop on my amd64 PC shows that this kernel cuts down the number of wakeups by around 30%.
1. Open a gnome-terminal and get root privileges:
Code:
sudo -s
2. Install required packages for building the kernel:
I am having trouble in configuring xorg.conf. I am running Suse 11.3 desktop on my PC. Also, I have one onboard nvidia graphics 6150SE and I have put one nvidia 8400GS 512Mb in the 16X PCIe slot for the additional seat...
So kindly tell me what should I do now or what things are missing ?? For any further info abt my PC plz tell me to post outputs(specify the commands for the same..)
this blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
I have a PC with a single HDD and multiple partitions as follows:1. A FAT32 - Special partition for recovery (Windows kit provided by manufacturer)2. NTFS - C: win partition for primary Win3. NTFS - D: win partition for other Win OSThese 3 are primary partitions.4. An extended partition with NTFS E and the rest of HDD the default partitions of openSUSE 11.3 (/ , /home)All the OSs worked perfectly until I reinstalled the D: Windows OS. During the Win install the machine is restarting and normally continues to finish the setup. In my case after restart the following message appeared: Invalid partition table.I think that by reinstalling linux I will get access to the C and E partitions too but I need to reinstall win on D too. How can I make this possible.
I'm a plain user of Open SUSE 10.2 for more than six months now on a dual boot machine (Vista Ultimate) and I'm 80% mostly on Linux now but because of my job I still have to keep windows.
My 1TB HDD is full and I've got a new 1TB HDD to add to my system. My plan is to leave this HDD only for Vista and to use the new HDD for Open Suse, changing it to the 10.3 version and without to lose my data and my settings (keeping the Home directory).
Considering that I am a ignorant could someone give me a step by step plan as much as detailed possible, in order to succeed?
I have been running ONLY linux (ubuntu) on my computer for years now. However, a friend sucked me back into the world of MMO's (angry fist @ RIFT). So, I decided to pick up a new disc, slap windows 7 on it and now want to dual boot.Basically I had to do some disc juggling to get windows to play nice. So my windows drive is now first, then my Ubuntu drive second.Its been a while so I'm wondering how involved / what would be the steps to get grub2 to chainload into windows7 (in my head I want to say I'm going to boot into the live cd, mount the windows disc and reinstall the loader to the windows drive since its the first disc in the chain?)
