I see the T105 is supposedly 100% certified but for the life of me I can get past go with the setup. I get to the first setup screen (after choosing the language) and I select the install option... the screen goes blank and nothing happens. The DVD stops working the whole things just sits there.
View 3 RepliesI am looking at getting a Dell Poweredge 850 Pent4 3.6GHz 64bit with two 160Gig SATA drives and I was wondering if anyone has installed Centos on one of these servers or has anyone had any issues installing Centos on these servers.
View 1 Replies View RelatedI am having a problem recognizing the full 24GB memory on a dell PowerEdge R610 system I just purchased. This is the Fedora 11 preview version, uname -a returns this:Linux comp1 2.6.29.3-140.fc11.x86_64 #1 SMP Tue May 12 10:44:27 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
this is the off the shelf box from Dell and it is a quad-core with 24GB memory, but the OS can only recognize about 3GB, here is the free -m
total used free shared buffers cached
Mem: 2980 607 2373 0 24 176
the system is otherwise functioning normal. how to get the full 24GB of mem recognized?
I've just installed 11.03 Server 64 on a Dell PowerEdge 860. Installation went fine, the only thing out of the ordinary that I saw was it did the install on sdb and not sda. I was prompted for reboot as expected, but on reboot I never see grub (installed to /sdb as the default). There's no screen output and the server just hangs.There's a SAS1068 Raid Controller with two HD's attached to it. I've run Dell Hardware diagnostics and they all come back fine.
View 1 Replies View RelatedThe default (graphical) installer did not work on my PC (i7 quadcore 8 GB DDR3). I have installed Ubuntu using the alternative installer (Desktop, 64 bit) on my external USB drive. I installed grub on the MBR of the second drive (/dev/sdb) as I did not want to touch my (first) Windows disk. After reboot (chosing the USB drive as boot device, else Windows is booted) grub reports an error and enters the rescue mode. I tried all possible combinations of "root=(hdX,Y)" in grub.cfg to no avail.
I repeated the whole procedure but now disconnected the internal HD with Windows. Installation went smooth again (Windows disk was not seen this time), but after reboot (the internal drive connected or not) I again get (slightly different this time) grub error: can not find file.
I'm trying to make a fresh install of Ubuntu 10.10 Server 64bit but is stuck with the Partitioning Disk part and Ubuntu 10.04 LTS provides the same error. The installation wizard gives me a menu:
!! Partitioning disks
This menu allows you to configure iSCSI volumes
iSCSI configuration actions
[code].....
Here is a copy of what shows on by screen (I used sudo -s because I thought it might be an environment issue). Not sure what to do here Bash seems to be installed and if I run bash I get no errors. I did just upgrade to 11.04.
Code:
root@jackie-Latitude-E6410:~/Downloads/SametimeStandardClient/sametimeclient.standalone/Linux# dpkg --force-architecture -i sametime-connect-8.5.1.i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
dpkg: regarding sametime-connect-8.5.1.i386.deb containing sametime-connect:i386, pre-dependency problem:
sametime-connect:i386 pre-depends on bash
[Code]...
I am trying to install ubuntu server 9.10 on two dell poweredge 2550 servers that I have at work and I can't get the install to complete on either. I saw some posts somewhere saying that it could be bad memory in the computers so I even put brand new memory in each, which needed upgraded anyway but the install still fails.The install usually hangs when trying to detect network drivers and it also hangs on some other file (I forget now). I remember I had an older version of linux on one of them before. The install says the file is corrupted on the cd. I have burned multiple cd's in different drives on different computers using the lowest speed on all of them, and all install attempts fail. I can even take the exact same cd's and install in vmware on my mac so I know for a fact the cd's are fine. What makes me more confused is that I can install windows server 2003 without a hitch on both the servers I am trying to install Ubuntu on.
View 3 Replies View RelatedI am trying to install ubuntu 8.04 general desktop flavour in dell poweredge 2650, but it is not working..doesnt ubuntu 8.04 supports installation in a dell poweredge 2650..if not so thn what can be done for that..any other latest version which does so??
View 2 Replies View RelatedI just got my new server today (a Dell Poweredge 2850), and I'm trying to install the latest version of Ubuntu on it, however it fails to detect my hard drives. They are in a raid array (raid 1 I believe). I've never worked with a raid array before, and I'm wondering, is there anything special I have to do to install Ubuntu on one?
View 5 Replies View RelatedI was trying several times to install Centos 5.4 32bit via DVD or netinstall method. Installations stops at setp where is formating disk and always at 12%. No error messages only can't format logical volume and please reboot server. Also deleted and create fresh RAID 1 array, but not helping.
View 7 Replies View RelatedThis is my problem, I want to install debian 5.5 Lenny stable (2.6.26-2-amd64) on our new Dell PowerEdge T610 with a PERC controller H200
but nothing to do, the default Debian installer does not detect it. After more research, the module that I must load is "mpt2sas" and after normaly my hard-drive will be detected I'm going on the Dell site, there are only drivers for RedHat and Suze distribution .. I still try to install rpm packages but without success!
FC11 i386 dvd iso image passes pgp verify. Burns fine and verifies fine under nero. Boots fine and verifies fine on my athlon system and installs just fine. Not one issue at all. 1374 pkgs install without issue. Take the same disc put it into my dell poweredge 2850 (dual xeon) and the disc fails to verify.
Even if I go ahead and try to install, it will boot and go through the menus. Then on package install at some point it will say one is corrupt and halts the install. Yet ubuntu 9.04 installs just fine on it. So I don't see how it could be the dvd player itself, though not 100% ruled out.
I have a problem similar to the one the poster in [URL]. I can't install Skype and some some other programs. The error message says something like this: lib32stdc++6: Depends: gcc-4.4-base (=4.4.2-3ubuntu1) but 4.4.3-4ubuntu5 will be installed Depends: lib32gcc1 and will not be installed
I just installed 10.04 and almost all settings are at their defaults.
I run a Minecraft server and it uses Java on a VPS that has Ubuntu 9.10 Karmic Koala amd64. I have Java 1.6 running with no problems, however many people say Java 1.7 makes a major performance increase (I have tested this on my Win 7 64x computer) which would help reduce lag that my players encounter. I downloaded the Linux x64 tar ball from [URL] how to install it (no deb or auto-installer).
View 1 Replies View Relatedi'm running Ubuntu 9.10 amd64 and installing a Canon Pixima iP 1600. The drivers which tried to automatically install only have Pixima iP 2000.
View 2 Replies View Relatedmy lappy is 64bit...But I dont remember, So far I am using 32bit ubuntu. So How can I know if my computer is 64bit machine? if it is, Installing ubuntu 9.10 64bit will give any performance fetch??I guess 64bit ubuntu and 32bit are same interms of functionality and look Right? may be performance difference? give me some info...
View 5 Replies View RelatedYesterday, NVIDIA released a new set of drivers. For ubuntu 10.10, I downloaded 270.41.06. I havent been able to set it up on my fresh install of Ubuntu 10.10.
I have tried the following methods:
1. First changed the settings for updates to accept proposed updates. This is also suggested at [url]
Then installed the additional driver proposed by Ubuntu.
On restart, no login-screen. (Xserver fails to come up!)
2.Edited the repos by adding ppa:ubuntu-x-swat/x-updates. Unfortunately 270.41.06 is not the latest driver available there - 270.41.03 is the current version. On adding this repo the driver is searched successfully by synaptic. Installing nvidia-current brings up the driver version to 270.41.03 without any issues.
Nvidia X Server Setting prompts to run the nvidia-xconfig. On doing so a new conf file is created.
On restart, the Ubuntu splash screen is not displayed. Again Xserver fails to start!
3. Finally, I tried installing the .run file provided on Nvidia's website. First, I dropped to a root shell. Then cd'ed to the location where .run file was saved. On running the .run file, the installer asks you to change the run-level to 3. On doing so by telinit 3, the driver starts installing. As soon as I accepted the terms and proceeded to the next screen, a warning was displayed saying the pre-install script had failed!
But the driver installation does proceed to completion.
Even this method failed. The Xserver still does not start. No splash screen.
Currently I am running the system by restarting the Xserver in failsafex mode.
I've got a problem with installing 64bit systems on Virtual Box. It is reporting that my 64 bit virtualization abilities (something like v-AMD or so) are present but not enabled. There is also an advice to enable it in the bios but I can't find anything like this actually. My motherboard is Asus M4A88TD-M EVO with quad-core AMD processor. IS there any trick to enable this feature somewhere in the system or it is a limitation of my hardware?
View 4 Replies View RelatedI'm trying to install 13 x64 with Unetbootin, but i'm getting '
Code:
no root device found boot has failed. sleeping forever
i am trying to install ubuntu server 10.4 on a fujitsu siemens x300 s2, but when it comes to dectcting the hard disk it cant find them. it says i have to load the scsi drivers. i have gone threw the list that appears on the list but none work.
View 2 Replies View RelatedI got a xend start problem when I install xen 4.0.1 on ubuntu 10.04 64_bit my installation steps are as follows:
first, install packages$sudo apt-get install bcc bin86 gawk bridge-utils iproute libcurl3 libcurl4-openssl-dev bzip2 module-init-tools transfig tgif texinfo texlive-latex-base texlive-latex-recommended texlive-fonts-extra texlive-fonts-recommended pciutils-dev mercurial build-essential make gcc libc6-dev zlib1g-dev python python-dev python-twisted libncurses5-dev patch libvncserver-dev libsdl1.2-dev libjpeg62-dev iasl libbz2-dev e2fslibs-dev git-core uuid-dev ocaml libx11-dev bison flex
[code]....
I was curious as to if there was a way to install a 32bit driver on a 64bit system. I have a dell v515w printer and the only driver they provide for it is a 32bit driver. I was wandering if anyone may know of a way to install it or if anyone knows of any other available drivers. I have searched everywhere for i dont know how long and came up with nothing i have tried installing the 32bit libraries and it didnt help.. and going back a 32bit system is out of the question due to ubuntu not wanting to load.. i think it has something to due with my hard drive being to large... but im using ubuntu 10.10 maverick 64bit...
View 2 Replies View RelatedI installed fedora 12 X86-64 and after installing wine throw yum it is not working it reach to registering binary handler for windows applications [ok] and it is blinking several times and nothing happened after that
View 11 Replies View RelatedI'm trying to install pdksh-5.2.14 in my Slackware-13.0-64 machine. Does this mean the software is not for 64bit machine? How can I fix this? The info file doesn't show me the location of the 64bit version, therefore I assume this one worked on such machine.
View 4 Replies View Relatedhow to work with linux (centos 5.2 64bit) but i am having a hard time to get this screen install. I was going to try this but i was not sure as i have reinstall the os many times because i do something wrong.
apt-get install screen
I am attempting to install CentOS 5 on a Dell poweredge 6400. The drives are configure for Raid 5 with about 67 gigs of space on the server. When I select any option under Partitioning of your hard drive, it gives me an error. " No Drives found - An error has occured - no valid devices were found on which to create new file systems. Please check your hardware for the cause of this problem."
View 1 Replies View RelatedI have a laptop that doesn't display correctly since installing F10 x86-64. Instead of using the i810 driver, I see the experimental intel driver. I am running on a Dell D630 laptop with the default intel integrated graphics.
Just to note: Running gnome. I tried KDE and I can actually get this to work and display in 1600x1200. I don't want, "well use kde then" to be the solution. Also, in gnome, if I go to the screen resolution option from the menu, the mirron screens is clicked. Even when I detect monitors and unselect the mirror screens and pick the correct resolution, when I click OK, the screen flickers, and I go back to the same screen with the original default values? Wierd.
I got the bright idea to install system-config-display (something like that), which installed fine. I then changed my default resolution to 800x640 just to try it (really want 1600x1200). Well, I decided to reboot. Not the laptop doesn't start, it stops right after loading anaconda, and just won't go any further.
So two questions:
1. What do I need to change to get the laptop to actually boot?
2. How to get the external monitor to display in 1600x1200.
I am pretty new to linux, I was trying to install vnc enterprise edition (x64) but was getting the following error message:
"error: Failed dependencies:
libX11.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libXext.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libXtst.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6(GLIBC_2.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libcrypt.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libcrypt.so.1(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libdl.so.2()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libdl.so.2(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1(GCC_3.0)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1(GCC_3.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libm.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libm.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(CXXABI_1.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(GLIBCPP_3.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(GLIBCPP_3.2.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64"
What to do for me to resolve this error.
$ wine /home/gnu/Downloads/win7/adobe/pagemaker7/Pagemaker/setup.exe
Trying to load PE image for unsupported architecture (I386)
Trying to load PE image for unsupported architecture (I386)
wine: Bad EXE format for Z:homegnuDownloadswin7adobepagemaker7Pagema kerSetup.exe
This is the error message. How should I proceed?