Ubuntu :: Grub Menu Not Showing Up / Alarm At Startup
Sep 1, 2011
I have a National Instruments gpib interface PCI card on my machine. It has been working up till now.The computer was moved when I was gone, and now at start up I get two alarm beeps from the motherboard speaker, no grub menu (hidden line is commented out and time out is gtr than 0).In the past I had to lock the kernel to 2.6.32-28.55.newer kernels broke the interface...although prolly foolioshly, I did allow other system updates.
I am working with a acer netbook that I originally had WinXP installed on. I downloaded Ubuntu 9.10, transferred the iso contents to a bootable USB drive and installed Ubuntu. I remember during the setup process that I made sure I chose the option to install on one partition. There is only one partition on my netbook with a small second partition as a swap.
After the installation process and reboot I noticed the grub menu would pop up every boot up giving the list of operating systems of which XP was included. I then ran the update manager and updated 9.10 with all updates. After rebooting the grub menu again showed but the option to choose XP was now gone.
Now everytime I boot up the grub menu shows. How can I modify grub so it will automatically just boot to the OS.
Every time I update my kernel (today with 2.6.32-25-generic), I always have to manually run "sudo update-grub" or ells the new kernel does not show up on reboot??? Is there a config some place to get it back to automatic?
I have dual-booted Windows XP and Ubuntu. Because Ubuntu 10.04 doesn't have the required proprietary drivers for my system, I chose Ubuntu 8.04. The installation procedure went well, the drivers are there, everything's perfect but... there's a problem with the GRUB menu that appears just after launching my laptop.
When I first installed Ubuntu it showed Ubuntu (and some letters and numbers), another instance for recovery mode, some memory test lines (I guess there are two of them) and Windows XP.
But after I used the software updater in Ubuntu (to make it up-to-date), the grub bootloader shows two more lines - and those are the same as the first two - Ubuntu (with some letters and symbols) and Ubuntu recovery mode.
Why are those duplicates there? I've never installed another Ubuntu OS on my PC. Because at the moment I have two Ubuntu and two Ubuntu recovery mode lines .
I have a computer that only runs ubuntu and have decided to put fedora on. I put fedora on the computer and made a new partition for it. When I turn the computer on, it logs straight into fedora not even showing me a grub menu. Is there some way that I can update grub so that it knows that ubuntu is also installed
Last week i decided to give the 11.04 alpha 2 a go on my laptop but compiz is currently too unstable for the OS to be of any use so I reinstalled 10.10. In doing this I deleted all partitions and started completely afresh. Strangely since then I have kernel image 2.6.38-1 at the top of my grub menu but if i try to boot it i get either a single blinking cursor or a kernel freeze. I cant find any reason why 2.6.38-1 should be in grub on 10.10.
removing it from the config files as im not used to Grub2 and have been told i cant just directly remove it from /boot/grub/grub.cfg.
After installing Ubuntu 10.10 dual boot with Windows 7(not inside Windows 7) and restarting I come to a blank screen with a blinking underscore.I assume the GRUB boot loader is missing or i installed Grub in some other partitions. Now i unable to enter in to Windows 7 OS.
I reinstalled Natty yesterday and then installed Fedora on a separate partition.
I now havedouble the menu items in GRUB2 for both of these.
I ran the update grub command in the terminal and it goes smoothly, but the extra menu items still don't go away.
Puzzingly the menu items point to the same partition on the drive as their clone. Both of the Fedora menu items point to sda8
For example. tl;dr:
How can I remove menu entries in GRUB? I searched but could not find a reliable answer other than re-running update-grub.
How could I remove GRUB and replace it with Plymouth? Ubuntu Software Centre actually shows Plymouth as "Installed" even though it does not run on startup.
Today when i browsing the net suddenly the system going HANG.....i will try to get the system monitor menu but in the menu list there is no icons. it is not displayed. then i will going to a warm restart....... after that the system didn't showing the grub menu.....it load the WinXP.......i will try two three times but the grub menu is not showing.....i am using the UBUNTU 8.10.
I had a minor problem with my ubuntu install, and a person said to go to startup manager and select reset to original settings. I did this and when I restarted It asked me to boot ubuntu 9.10, which would not work as I upgraded long ago. Now all I get is the option to boot 9.10, and I really want to get back into my computer. Running ubuntu 10.04 with latest updates as if 25 september New Zealand Time.
When I first boot up. I get the GRUB command line. What happened to the boot menu? And I can boot up into my Windows partition just fine. But when I try the other partitions i get "Unknown file system" or when I try to boot into the other ntfs drive, I get "BOOTMBR missing", but yet it does not mean Windows, because i can boot that just fine. I can't find my Ubuntu partition. How can I get the GRUB boot menu back?
After installation of windows 7 installed debian 8.3. But in grub menu no boot option showing to windows.There ar only two option 1.)to boot in debian and 2.)advanc option for debian ONLY!!
Would like to eliminate from the Grub menu of startup options all but the latest kernel update? Have made some attempts, but don't have authority is the message.
I'm interested in editing the Grub startup menu to take out some of the previous versions of Ubuntu. First, is there a reason Grub keeps the previous versions available to boot to in that list? If it is just in case of a problem with the new installation wouldn't it make sense to only have the most recent previous installation? Anyway here is the problem, when I run: Code: "gedit /boot/grub/menu.lst"
The editing program opens the file named "menu.lst" but the file is empty. How is it possible for this file to be empty yet I have multiple boot options and they all work? Does anybody know what I am running into here?
I was wanting to use StartUp-Manager to increase the resolution of the GRUB menu and the boot logo screen. Changing the resolution for the GRUB menu works fine. But the Ubuntu logo that should show up during the boot process is all scrambled across the screen. I tried multiple resolutions to fix it and none of them work. How do I restore everything back to their defaults? I tried putting the numbers all back to where they where when I first ran StartUp-Manager but that didn't fix it.
I'm encountering an unusual problem with GRUB 2. Whenever I start up my system, my BIOS'es load and do their thing, and then hand the show over to GRUB, which is supposed to not appear or do anything because my GRUB countdown is set to 0, but instead I get two errors like this that appear for about 5 or 10 seconds (greatly delaying startup) and then Xubuntu, the first entry on my Grub menu, loads: (I set GRUB to automatically boot my first entry):
Code: error: no suitable mode found error: unknown command 'terminal'
I recently installed Fedora 14 on an old Dell server (Pentium 4). It works fine, except that it somehow includes an extra startup step, in which I have to choose between two different grub versions. Here is the screen I get:
GNU GRUB version 0.97 Fedora (2.6.35.11-83.fc14. i686) Fedora (2.6.35.6-45.fc14. i686)
Press enter to boot the selected OS, 'e' to edit the commands before booting, 'a' to modify the kernal arguments before booting, or 'c' for a command-line. I always select "Fedora (2.6.35.11-83.fc14. i686)" because I presume it is the latest version. Is there anything I can do to automate the choice of "Fedora (2.6.35.11-83.fc14. i686)" and avoid this extra step? On another subject, I have already modified the custom.conf file to eliminate the login screen step.
I am testing my crash recovery strategy for my linux system and I am having trouble with GRUB. I am basically restoring my backup (i.e. tar) unto a different hard drive, but I am having problems getting the machine to boot without me having to type the GRUB commands at the GRUB prompt that is presented when the machine boots up off the new hard drive. I have tried to restore the MBR in two ways (the 2nd one is the one that gets me to the GRUB prompt):
1. Get the MBR off the original drive and write it unto the new drive (all via dd), but that did not work at all: the machine hangs right away during boot up. It seems to hang right at the point where the BIOS tries to read the MBR.
Code:
On original drive:
# dd if=/dev/sda of=mbr+part.bin bs=512 count=1
On new drive (new drive is now in place of original drive):
reboot and remove FEDORA CD Using the 2nd option above, I get the GRUB> prompt during bootup. I can then boot into the system by issuing the commands that are in the menu.lst file, followed by the "boot" command. However, I would like for those commands to happen automatically, just like in the original configuration. It seems to me that GRUB is actually finding all its stage files because I doubt the GRUB program (the one displaying the prompt) fits entirely in the 446 bytes it has on the MBR. So, it must be loading its stage 2 (and stage 1.5??) files from my /boot partition. However, if GRUB is loading its stage files off the boot partition, why does it not load/read the menu.lst/grub.conf contained in the boot partition also?
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
As the titles says, applications enabled under "Startup Applications" does not show up in the "Notification Area". I can see that the processes are running, like update-notifier and xchat for example, but they have now icon representing them. I don't think I've ever seen an "There are updates available"-icon since I installed 10.10.
Edit: I didn't have any pending updates, so that explains why the update-notification icon's been missing.
Edit 2: Regarding the xchat icon my guess is it's simply loading before the Notification Area applet has, any known way around this?
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want.
In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
Is there a document explaining all of the radical changes?
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want. In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
I am running Ubuntu 9.10 when I install new software it does not show up in the menu. I have to manually add it by editing the menu. Is there something that I have done that would keep it from adding things to the menu? I am new and not really sure if this is normal.
i am writing in Latex and tend to view my document in xdvik out of the vim editor. for some strange reason i suddenly dont have a menubar or scrollbar in xdvi anymore. i looked at the manpage which mentioned +expertmode 16 but this doesnt work somehow. in .xdvirc the expertmode is swiched off as well, but it doesnt make a difference if i change it there either. i tried reinstalling, which didnt work. I am able to get normal behaviour back from the commandline via the -q option. however i'd rather just have things back to normal
I am using 10.04 and when I start my system I don't get any boot menu to choose from. I am the only user of this computer and don't have to log in on start up but I would think that the boot menu screen would show up so I could use the recovery tool or change kernel if I wanted to. I have two other computers, and that is the first think that shows up on the screen when I boot them on. I am sure there is an adjustment that need to be made but not sure what to change.
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
I just installed cairo (may i say is the greatest ever?) but there is a gmenu there that when i click on it the icons for the menu wont work, there is a setting for configuring ths applet that lets me enable and disable the icons for it and i have it on enable..
I have also notice that i got no icons for the system menu i the gnome panel, is this related?
