I set up my Dell Inspiron Laptop as Dual Boot -> Xp / Ubuntu 10.04. - all worked well. I had 2 installations of XP on this machine and I removed one - all worked well. I then went into XP and deleted the partion (4) that the old XP had resided on (using Easeus Partition Master) All NOT working well !! Now when booting the machine I get grub rescue> I did ls and got ....
[Code]...
I have ubuntu in sda7. sda6 had bt4, sda3 had Win7. From Win7 I removed sda6. Now when I start my computer I get grub rescue. How can I tell grub that ubuntu in sda6 and not in sda7 anymore or how can I create sda6 again so ubuntu goes sda7.
View 1 Replies View RelatedDeleted the Ubuntu partition by accident. Now at a loss as how to get Windows working again. I had all my files saved, and did a full format and reinstall to Windows. Thinking that it would just overwrite grub but this thing is like a virus.. I cant do **** at the grub rescure command prompt... it just sits there with a cursor... Even stuff like reboot and quit or exit don't even work... what the hell? So I pop my Win7 install cd in and I find that for some reason I have no recovery console... just the option to install. I install but no grub, the little virus is still there and I just wasted an hour of my life while Win7 installed again because I still cant view it.
I deleted all the partitions and wiped the entire disc and grub is still there.. I was thinking that Windows would just replace grub automatically. Heh the Bootsector always seems to get owned on Windows and I expected grub to be just as useless but in it's own way, it's worse.
then my computer starts black window opens error: no such partition grub rescue>
[Code]....
I have a netbook that dual-boots Win XP and Ubuntu 10.04 and accidentally hit the Win recovery mode in GRUB today, but quickly restarted without formatting or proceeding with any recovery. But upon reboot I just see: error: no such partition. grub rescue>
What I have tried so far: Boot to USB Live Disk... It won't, just goes straight to grub rescue.I do ls and it gives me (hd0) (hd0,4) (hd0,3) (hd0,2) (hd0,1) (fd0) error: fd0 cannot get C/H/S values.
set gives me
prefix=(hd0,5)/boot/grub
root=hd0,5
but if I try to boot it says unknown command so I figured I needed to find the right partition to boot from but I went through all of them with ls (hd0,4)/boot, ls (hd0,3)/boot etc. and every partition comes back "unknown filesystem".
I installed Linux and used it for a bit, then decided it wasn't for me. I installed it alongside Windows 7. Whence I decided it wasn't for me, I decided to get clever and delete the linux partition... Four hours later and I am still stuck where the grub comes up at computer launch and says "no such disks" then, "grub rescue>". I tried everything on the Windows 7 forums, tried overwriting the grub with a windows 7 disk. This thing still comes up everytime... grub rescue. how to overwrite this grub thing?
View 2 Replies View RelatedI am new to ubuntu OS, I am having quiet a hard time solving out certain problems. I have Ubuntu 10.10 and Win Xp installed on the same hard drive partition i.e. C drive. Now yesterday accidentally I deleted a folder from C while I was logged in to Windows. Now today when I restarted my pc I got this error message :
error : No partition found
grub rescue>
Then somehow I managed to reinstall the Grub loader. Now whenever I restart my PC I get this error message :
GNU GRUB version 1.98+20100804-5ubuntu3
Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.
grub>
i just installed ubuntu 10.10 x64 on my computer and removed the windows 7 partition and installed it on that one it installed as usual now as i booted it give me the following error
Code:
error:no such partition grub rescue> i tried one or too methods given to restore grub but it isnt working wht can be done ?
I installed ubuntu 11.04 on a usb hard drive which I created a 100 gig partition however when i try to boot from the usb drive I get the message error:no such partition grub rescue> when I boot from live dvd I can see the partition I created with all the files on it.
View 1 Replies View RelatedJust delete a linux partition and now when i boot a message appears and says error: unknown filesystem grub rescue >
I have search on the net for this problem and i have understand it a little. But my situation is a bit different and because i don't want to format my hard disc i wanna try to fix it. So before a couple months i download ubuntu 9.10 and i installed it a month later. But my computer used to crash all the time and i couldnt use it. So i download the latest ubuntu 10.4 and install it while having windows xp and the old ubuntu 9.10(so i had windows xp, ubuntu 9.10 and ubuntu 10.4 partitions). Now i tried to delete the partition of ubuntu 9.10 from disc utility. so i have the message i wrote above when i boot. I dont wanna delete my windows xp and ubuntu 10.4. what should i do to stop this message from appearing.
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
I have a dual boot system with Windows XP and Fedora12. Following is the partition structure of my harddisk.
Disk /dev/sda: 80.1 GB, 80060424192 bytes
255 heads, 63 sectors/track, 9733 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x5e5e5e5e
Device Boot Start End Blocks Id System
/dev/sda1 1 1912 15358108+ 7 HPFS/NTFS
[Code]...
I deleted the "/dev/sda8" through Windows Disk Management, and when i restarted the system. GRUB boot menu vanished and a GRUB console appeared. Then I booted my system using Fedora12 live USB and created a new partition at same place from where i deleted it, and then after restart my started working normally as it was before partition deletion.
But, I don't understand what actually happened. Can anyone tell me in detail what happened and why and what to do to avoid such things in future?
I was messing around with the partitions and accidentally y deleted the ubuntu partition! I have Windows 7 as a dual boot but I can't access to that OS anymore. The message that I get is: error: no such partition. grub rescue>
View 5 Replies View RelatedI let a 'friend' use my laptop over the weekend. Now when I turn it on, it loads the BIOS details, then says no active partition, then no OS cannot be found.
It looks like they have deleted the partition with SuSE with the Grub Loader.
I cannot load up SuSE or Windows 7!
Any ideas on how to recover the boot to load Windows 7?
I have tried using the Windows 7 install disc to repair - but it does not recognise that Windows is installed and wants to do a clean install only.
Is it worth trying to reinstall SuSE and hope it detects Windows on the other partition? (I assume it is still there!)
I cannot get to a command prompt.
I've got Ubuntu 10.04 installed on one partition, and Windows Vista on another. I was messing around with my partitions, and now I can't boot to either one. I just get an error when I boot up on GRUB which says "error: no such partition", and then a prompt saying 'grub rescue>'. I've read up on other people's posts, and they said that I should reinstall GRUB from a livecd, but that doesn't look like it does anything. It seems that GRUB is trying to boot from hd0,8, and that doesn't exist anymore. I can change the 'root' and 'prefix' variables to the right partitions, but the 'boot' or 'chainloader' command doesn't work. You should be able to boot from 'grub rescue>', because that's what it's for, right?
I just want to be able to boot into Ubuntu, not Windows.
PS: Sorry if I'm specifying way too much information(or not enough), I'm fairly new to forums.
So I had Ubuntu Server installed and I decided to make some new partitions using gparted via a live usb of Ubuntu desktop. And so I think messed up pretty badly. Ubuntu Server won't boot and I get the following error followed by a grub rescue promt:
Code:Diskette drive 0 seek failure
error: file not found grub rescue >
To me, it seems like some boot files may be missing if not the whole system. After I made the partitions, the live USB of Ubuntu was still working fine until I rebooted.So here is the bigger issue, I figured I would just reinstall everything all over again, but instead I can't.
So earlier today I was running out of space on my regular Windows 7 partition and I played around with extending it. I ended up somehow deleting grub and messing up my entire system. I've spent the last 2 hours looking for the answer to this and everyone has been saying to boot from a live disk and fix it that way.
Well, I've tried everything, the only way I can boot right now is via USB and it will NOT allow me to. I checked on other computers and even re-installed and formatted by external hard drive to try and get it to work and it refuses. I've changed my BIOS to boot from USB so I have no idea as to why this is happening. Also, I've tried using the "ls" command to find my partition via "ls (hdX,Y)/" and all of them come up as unknown filesystems.
I dual booted ubuntu with vista a while back, but I was running out of space on both partitions. So I thought I'd install ubuntu on another slightly smaller HDD from an old laptop. I thought all the ubuntu and grub stuff were on that one partition, so I thought if I just deleted it, all would be good. I isn't. Now when I boot up, I get a message saying 'Error, no such partition exists' and then 'Grub rescue:' and an input. So what I want now, is well, basically to be able to boot windows. I'm guessing I either have to remove grub, or just make it forget I ever had Ubuntu.
View 6 Replies View RelatedI have a SONY VAIO CW26 laptop. I got a Windows-7 version prepacked with the laptop.I installed Ubuntu Karmic 9.10 over a new partition that i created using the inbuiltfacility in windows7. Both the operatings systems i.e windows7 and ubuntu karmic 9.1 were working nicely.Today i created 2 more partition within the partition inside windows.Once I rebooted after creation of the new partitions my laptop is just showing a black screen with following message.
GRUB loading.
error: unknown filesystem
grub rescue>_
[code]....
I just did a full installation of lucid erasing karmic. installation is completed but when I boot I get grub rescue. I also have WIN7 installed.
View 1 Replies View RelatedFirst time poster and recent Ubuntu adopter. I recently installed 10.10 on my main HD alongside a separate windows (xp) partition (it worked perfectly). Then I decided to get fancy and installed 10.10 to a flash drive directly from a live cd. I attempted to boot from the flash drive, and got a black screen with a blinking underscore for about 10 minutes, then I forcefully rebooted. Now, whenever I attempt to boot at all from my main HD I get "error: no such device and a ton of misc numbers. And the flash drive will not allow me to boot from it. Currently, I'm working within the Live CD.
I have a few projects I need to complete with Dreamweaver inside XP, so recovering it completely would be nice.
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for (,msdos1)/boot/grub.
=> No boot loader is installed in the MBR of /dev/sdf
[Code].....
I was dual-booting XP and Ubuntu 10.10 for a while, but as I never used Ubuntu it was just taking up space, so I figured I'd get rid of it. I used a partitioning tool from inside XP to remove the Ubuntu partition, forgetting that I used GRUB2 every time I booted to select which OS to load. Now when I start my computer I get stuck at the "grub rescue>" screen.After searching for solutions to this problem all of them said to either use the Windows XP CD to fix the Master Boot Record or reinstall Ubuntu, but I dont have my XP CD and there isnt enough room on my hard drive anymore for a Ubuntu install. Is there anything else I can do to fix this?
View 5 Replies View RelatedI'm experimenting a bit with my fedora, so I need to enter rescue mode very often. Every time I want to enter rescue mode, I need to insert fedora DVD Is there a way to install rescue mode on my hard drive so I could boot into rescue mode from GRUB?
View 4 Replies View RelatedI attempted to upgrade from 10.04 to 10.10. Upon restarting, I was presented this message:
Code:
error: the symbol 'grub_xputs' not found.
grub rescue>
I poked around the forums and found several posts that would probably be helpful but... I am unable to boot from a USB nor can I burn a Live CD as my other computer is a netbook. I made USB first boot in BIOS, but no luck.
I accidently deleted my ubuntu partition, and when boot I get this message:GRUB loading.error:unknown filesystemgrub rescue>I can't get into my bios options either... I just see the MSI splash screen and it cuts right to this error message.
View 4 Replies View RelatedInstalled Ubuntu 10.04 a week ago or so (using wubi.)Tried to upgrade to 10.10 from within Ubuntu using the update manager.Now the PC will only boot to grub rescue.When booting, this is what i get:error: no such device: cd200414-0606-4d7d-8c08-004e9b5dc92d.grub rescue>Three commands work: ls, set and insmod.The ls command only yields: (hd0)(no partitions like (hd0,1), (hd0,5), etc.)
View 4 Replies View RelatedI had 250gb hard disk with dual boot, xp and ubuntu 10.10.Yesterday, i tried to upgarde my ubuntu 10 to 11 from a live cd....b4 doing so, i used a win software EasyBCD to fix the mbr but it didn't work properly..and i ignored it(my biggest mistake)and deleted the ubuntu partion from the windows device manager. It just displays "Booting from Live CD" for few minutes and again displyas the same above error.What should i do now?Its ok if i m not able to recover my data back...i hv sycnd my docs on the internet.
View 9 Replies View RelatedI'm inexperienced in Debian. I have a dual-boot machine (64-bit, Debian 7.3, Windows 7, legacy boot) and encouter a problem at boot ever since I completed the installation of Debian 7.3 alongside the exising Windows 7. This machine has six hard drives: two are intended for ntfs storage of general data (raided together by RAID1); two more are intended for ext4 storage of general data (also raided together by RAID1); the fifth contains the Windows OS files and the sixth contains the Debian OS files. The problem is that I arrive to the grub_rescue each time at boot, seeing the message:
GRUB loading.
Welcome to GRUB!
error: no such device: e081517b-3399-4067-9294-8f0686f753ca.
Entering rescue mode...
grub_rescue>
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
I previously had a machine that dual booted Windows 7 and Ubuntu 10.10 32 bit. I recently attempted to wipe out the 32 bit Ubuntu and install 64 bit Ubuntu.
Here what I did:
- I booted from the LiveCD, and had no problems
- I formatted /sda3 using gparted. I checked that Ubuntu resided on /sda3 via the command "sudo fdisk -l". This worked fine.
- I then clicked the "install ubuntu" option on the desktop, and chose the largest chunk of free space.
- About 15% through the install, I was told the CD could not be read from due to a potential scratch or issue. I then tried to revert back to the Os running from the LiveCD, and things went crazy. I had trouble shutting down the machine and did a hard reset.
Now, whenever I boot I am greeted with the following message:
Windows Deployment Services: PXE boot aborted
error: no such partition
grub rescue>
At the grub rescue prompt when I ls, I see:
(hd0) (hd0,4) (hd0,2) (hd0,1)
I can still boot the LiveCD. I tried that again and tried to again format sda3 using gparted but had no luck fixing the issue. When booting from the LiveCD I am also told by gparted that "sda1 does not coincide with a cylinder boundary" or something of that nature.