i just wanted to know that during a dual boot installation with windows xp, if fedora is installed after windows, where does the GRUB go on the hard disk? In the /boot partition or the MBR of the hard disk?
View 7 RepliesI've successfully used Fedora 11 from a USB stick as a live cd iso. Everything seems to work on my netbook so i want to try installing it but I need it to be a dual boot with windows. How can i do this? And will it definitely work or are there issues (I've read that F11 has problems installing if not taking over the entire HD)?
View 3 Replies View RelatedI just installed Fedora and I love it but I can no longer boot Windows 7. I have two hard drives, sda and sdb.sda1 is my windows partition. sda2 is my /boot for Fedora. sdb1 is an ntfs partition for storage. sdb2 is swap. sdb3 is my 40 gig /root partition. Why can't I boot windows?
View 10 Replies View RelatedA while ago I used a friends computer with F11 installed on it. I definitely want to install F13 on my computer now. Please, can someone either tell me complete information from the beggining to the end, or simply direct me to a guide somewhere else on the internet. I have a F13 live cd and want Windows 7 to be in control of the boot (by I suppose LiveBCD).
View 14 Replies View RelatedIn fact, I put it on my PC of RedHat when it was free, and it didn't work.Are there any such tutorials to dual boot Windows 7 with Fedora 15 (latest version), or would someone be kind enough to walk me through the process? I have tons of music on Windows that I don't want to get lost.What are the chances that my Windows hardware will recognize in Fedora? I was bypassing to get to this forum, and I saw Nvidia drivers are difficult to get configured. Those are the drivers my PC runs on. I'm not sure of my hardware. How difficult would it to setup, and configure hardware?
View 2 Replies View RelatedI just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I'm wondering if anyone can give me some tips about this.I have very little fedora experiee and wanna start playing with it now.I'v bin using it for some short time a long ago but nothing much.Now I could use some help with this:Can I and how, instal Fedora11, while having Windows7 instaleed allready and then have them both with dual boot. I guess it should be possible but some tips / guide would be great so I don't kill my windows and have to reinstal all over again, as i wanna keep windows as main OS for work but have fedora to learn as well.By the way, I have 2x640Gb in raid0, 1st partition 100gb with Windows7 on it, and the rest on another partition. Both have data on them. If that means anything for instalation
View 9 Replies View RelatedI have Windows Vista Home Premium and I don't want to switch entirely to Fedora because I'm not as familiar with it as I am Windows. I mainly wanted to install Fedora for my Linux class at the Community College I attend. How do I install it with a dual boot so it doesn't take over Windows Vista? I had that happen once and it was a mess to fix and reinstall Windows Vista too.
View 7 Replies View RelatedI am attending college and I am starting my first Linux class tomorrow. I am going to be learning Fedora 8 (why they don't upgrade, is beyond me) anyways, I also have a third Server 2003 class. We have our own hard drives that we put in the school computers. (80gb) But here is the problem, I know normally your suppose to install Windows first and then Fedora second and you do not have a dual boot problem.
However my Server 2003 class was suppose to be on Monday (which was labor day) so I didn't have school. I am going to be installing Fedora tomorrow first thing, then on this next Monday I will be installing Server 2003 on the same hard drive, but Windows will be going on second. So my question is, how would I fix the bootloader so I can still dual boot Fedora and Windows without having to reinstall Fedora again?
I just installed Windows 7 Ultimate on my computer and I want to install Fedora Core 11 and dual boot my system. I have been on the net looking around, but I can't seem to find any suggestions on how I would do this. Can someone help me or give me a URL(s) that will give me a step-by-step guide on how to install Fedora Core 11 on a Windows 7 computer?
View 4 Replies View RelatedI have windows 7 Ultimate and want to install Fedora 10. Could somebody can suggest me some tutorials of installation of Fedora 10 ? and also I am worried about losing boot sector which has happened to me already. how to recover the boot loader for linux safely ( ofcourse with dual boot ability after recovering) ?
View 1 Replies View RelatedI am having trouble getting my laptop set up the way I want it. I want to install Fedora 13, using Ext4 encryption, and I also want to install Windows 7 encrypted using TrueCrypt.
On boot, I would like to have Fedora 13s GRUB, offering me the two OS choices. If I select Fedora, then Ill get the cool graphical decryption screen, and if I select Windows 7 Ill get the TrueCrypt boot loader prompting me for the decryption key for the Windows 7 partition. Can anyone give me instructions on how to get this set up?
I am getting a new computer with Windows 7 installed. It will contain a second hard disk on which I will install Fedora Linux. I plan to put grub in the /boot partition of that disk,so I won't be able to boot Linux directly to start. I plan to use the Windows 7 bootloader to dual boot, and I understand in principle how this is done. I set up a previous computer which was running Vista this way, using the program Easy BCD which simplified setting up the Vista bootloader. But the Easy BCD website doesn't address the question of what to do with Windows 7.
View 2 Replies View RelatedAfter going back & forth between win7b & F10 installs, I can't get both to live on the same hard disk for dual booting anymore. win7 complains about fedora's GPT disk being unacceptable for installation. win7 blows away fedora's GPT partitions when it installs. Fedora doesn't recognize win7 partitions when it installs. I can't specify exact partition boundaries with windows even if I know what they are, and I can't seem to find any info how to do it in parted either. I have win7 installed in partition 3 in a known location on disk, but if I reinstall f10 (again), it's going to blow away the win7 boot data on the disk. How do I tell grub where to find the chainloader thingy? Can that still even be used? win7 no longer uses ntldr, and I haven't found an updated procedure for this new boot method.
View 4 Replies View RelatedI just installed fedora 12 on my laptop. fedora is booting and working fine, but the problem is that now windows isn't booting. when I try to boot windows i get the next message:
"BOOTMGR is missing"
I looked at /boot/grub/menu.lst, and those are the lines for booting windows:
"...
title win7
rootnoverify (hd0,1)
chainloader +1
"
then i checked with fdisk -l and verified that windows is actually installed on the second partition (sda2).the next thing i tried was to use the repair option at the windows 7 installation DVD. the problem is that when i try to preform a startup repair, the installation DVD doesn't recognize my existing windows 7 installation, and therefore wasn't able to repair it. if it's relevant, here are some more details on my machine:
HP probook 4310
windows 7 64-bit
fedora 12 32-bit
i have one sata HD which I devided into 6 partitions {a system partition of the laptop, windows 7 (NTFS), swap, /boot (ext3), / (ext4), /home (ext4)}
Today I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;
One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /
[code]...
I have been trying out different Linux distros to dual boot with Windows Vista. First I tried Ubuntu and it worked fine. Then I tried Fedora 15 and it worked fine as well. Then I went back to Ubuntu but now I have decided to stick with Fedora. The first time I installed Fedora it gave me options for choosing default OS and other things, now I can't remember how I did that and can't figure out how to do that agian. How do I do that agian? I want it to automatically boot into Windows Vista. I am installing Fedora on a seperate hard drive.
View 1 Replies View RelatedI had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
View 2 Replies View RelatedSo I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
I am trying to dual boot Fedora 13 onto my Windows 7 machine. I have shrunk my Windows drive to create 100GB of unpartitioned space, but when trying to install Fedora onto this free space (it is recognized as "Free" space), the installer tells me that there is no space for the partition.
View 5 Replies View RelatedI have a PC with two seperate hard drives. One has WinXP running on it, and on the other drive I've installed Fedora 13 from a live CD downloaded from the fedora website. How do I get the system to allow me a choice of which OS I want to start on boot-up.
View 1 Replies View RelatedI looked for threads about this but didn't find them. If they are out the and I could be pointed to them it would much appreciated. I'm in the midst of building a new system and it will be a dual boot system with Windows 7 and Fedora. There will be two separate hard drives for each OS.
Currently I have a dual boot Win XP and Fedora system with a hard drive dedicated to each OS. The nice thing with this is that I found here on these forums a change to one of the Windows files that allows Windows to recognize that there are two different operating systems without having to spend the money for something like partitioning software. It was a simple one line change to an ini file, I think. Can this be done with Windows 7? If I'm not clear on what I'm asking let me know. It's been a while since I last did this so I'm a little fuzzy on it all.
I figured I would begin delving more into the open source environment by dual booting fedora and windows xp pro. Windows xp WAS already installed on the laptop, so I went through the steps to get fedora installed. Everything appeared to be working fine. Fedora came up nicely, and then I tried to boot windows (using grub boot loader). The Windows splash screen appeared, making me think things were fine. But suddenly the screen went black, with the computer going through a restart. This happened every time I tried to boot windows. So I began scouring the web to see if someone had a similar problem. I tried numerous things, but none of them worked. Of them, this appears to have gotten me farther than anything:
Going into grub I changed: rootnoverify (hd0,0)
to: rootnoverify (hd0,1)
Everything else remained the same. When I made this change, the computer went through Ramdisk, and the Toshiba recovery tool. Then two dialog windows appear in secession.
The first stating: Windows cannot find c:inerrordialog.exe
The second stating: Windows cannot find c:inootpriority.exe
I stumbled across information about the recovery console tool. Well, since my laptop has an OEM installation, there is no recovery console tool. But eventually, I was able to find one that I could download. (In case anyone is interested, here is the link for the [URL]
I burned the image to a cd on another computer, and then attempted to boot to the console from the cd/dvd drive on the laptop. But the system crashed, with the customary blue screen. I was hoping to be able to execute the chdsk command to repair whatever damage there might be, but this problem occurs each time I run the image. Fortunately I backed stuff up before this. I'm just hoping that I won't have to go through the ugly process of restoring everything because it's a lot to restore.
I had installed Fedora 13 on an unused partition of my ATA hard-drive yesterday. The primary OS here was Windows Vista.
Anyway, everything was working fne for coupla hours after which I had to restart F13 for some reason. This is when all the trouble began ..
Fedora wouldn't boot cause of some "power issues" - there were none. Windows Vista wouldn't boot because "BootMGR was missing"
I figured if I removed Fedora using the live CD - format the partition, it would help. It didn't. Well, atleast the partition got formatted. I tried re-installing F13 from the live CD but it doesn't finish the process - saying a command, something to do with 'shutdown' is not valid.
I tried repairing Vista from the Installation DVD but it is unable to do so.
Right now, on rebooting the computing, I enter the 'grub' console. I tried using grub commands to boot "Windows" from the (hd0,0) partition like thus,
Code:
grub> rootnoverify (hd0,0)
grub> makeactive
grub> chainloader +1
grub> boot
But it still maintains that "BootMGR is missing" .
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...