I am not able to create a directory on the windows partition. The error I am getting is:
mkdir: cannot create directory `test123': No space left on device.
mount command used:
sudo mount -t ntfs /dev/sda1 /media/
df -i output
/dev/sda1 15458772 315136 15143636 3% /media
[code]....
This is my partition table:
/dev/sda1 1 4255 34178256 83 Linux
/dev/sda2 4256 4437 1461915 5 Extended
/dev/sda3 * 4438 9964 44395627+ 7 HPFS/NTFS
[code]....
On my Linux system, I want to create a symbolic link to a folder on my Windows 7 partition formatted FAT32. I use:
sudo ln -s /media/OS/Users/dennis/AppData/Roaming/.minecraft ~/.minecraft
However, I end up with a file in my home directory called .minecraft and when I try to access it, I receive:
bash: CD: .minecraft: Too many levels of symbolic links
is there a way to make the symbolic link to the FAT32 folder?
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....
then have a dual boot option to pick wether to load xp or ubuntu ,I want to make sure I can install ubuntu and get it working correctly IE loaded all drivers and install a media sharing device to view on my xbox 360 and install firefox and utorrent , This is basically just a media machine to do everything on my xbox 360.
I dont want to install it from scratch in case there is a problem then I just set myself up for a bunch of work to get it running correctly again.
Currently, I have a full install of Ubuntu, but I would like to create a partition for Windows. I only have 1 MB of unallocated hard drive space, but I do have a 227.13 GB partition, only 6.48 GB of which is used. If I create a partition table, will my computer become unbootable? And if so, is it possible for me to use the Disk Utility to re-format my hard drive to NTFS so I can completely reinstall Windows instead?
View 3 Replies View RelatedI am running both Ubuntu and XP and have a local server for my computer on both systems. Both partitions have a www directory that is accessed when I type localhost into my browser.
I want to be able to work on the project in both systems and have the changes I make show in both. So my questions is how can I make "localhost" point to the windows www instead of the /var/www one when I start up the server?
First I tried to create a new partition within windows but Ubuntu never liked it. Finally I just went to intall it on the whole hard drive and it froze during the who are you screen trying to get a time from the network time server. I read something that said restart and now I cant boot my laptop
View 6 Replies View RelatedSo Ubuntu needs to go so I booted onto a live CD of Ubuntu and used Gparted to delete every one of my linux partitions. I created a ntfs partition, will windows boot on this. When i tried it before it said didn't recognize file system so I deleted the linux file system and created a ntfs one. Is that all?
View 2 Replies View RelatedI do have a dual boot system vista and ubuntu but thought it would be nice if I didn't have to switch back and forth for some things. Since I all ready have windows installed with all the required files, directory, and registry is their any way ubuntu could pick those up for running windows programs. Instead of emulating them in wine. In theory I could install my programs under windows and run them under ubuntu if ubuntu recognized my windows partition as c drive instead of OS.
View 6 Replies View RelatedI just started using ubuntu on my laptop... At the moment is the only operative system available on my machine.Unfortunately I need to install Windows 7 too because I need it for my job.can somebody please help me creating a partition and installing windows?will I be able to access the files stored on my pc from both the operative systems?I recently replace the hard drive and at the beginning I created a bit of mess because I first installed windows 7, than ubuntu on a partition (splitting the hard-drive about 50%) and then, as I was having problems with windows I decided to just keep ubunto, so I reinstalled it on the hole hard drive (I guess)
View 5 Replies View RelatedI am using Ubuntu 11.04 on my sisters computer which I am borrowing until my laptop gets fixed by Dell *sigh*
The only catch was that I had to remove the virus thats been plaguing this computer any means necessary my plan was to delete the windows 7 partition and put Ubuntu in its place temporarily.
My sister didn't have the Windows 7 DVD that was given to her *sigh again* but she did still have the key labeled on the side of the machine. So my plan than included to download that .iso of Windows 7, and then use setup.exe.
Long story short, someone repaired my brother's computer and set a password on his account, now we can't get in and can't contact the person who set the password. Is it possible to create a Windows XP user if I have access to the windows partition, from a linux partition or pendrive, for example TinyCore?
View 4 Replies View RelatedNew Dell Inspiron 1545 Laptop with Windows 7 Home PremiumTrying to load Fedora 10 in available space. Had to go to custom layout none of the other partition selections seem to work - kept getting error messages. Custom layout would let us format the / and /boot partitions we created.
View 5 Replies View RelatedI have Suse 11.2 installed. In Dolphin file manager I can see read files in my windows partition. But I cant create or delete any of these files as a user. I opened Dolphin as root and changed the permission rights of this windows folder so that all groups and users can view and Modify content. But when I try to create something I get the message access denied, "check your permission rights". And how can I change these permission right for my user in console mode?
View 14 Replies View RelatedI've shrunk my Windows partition to ~200GB and made ~100GB of free space for Ubuntu BUT .. it doesn't allow me to create a new partition there as I already have 4 primary ones.Since all of the given partitions ( including Recovery and Tools ) can not be touched ( removed ), I have no idea on how to solve this ..
Code:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
[code]....
using Opensuse 11.3, I have used Ubuntu 9.10 in the past and have had a blast with Linux. I have to rehash some of my old skills that I have forgotten in the past several years..I installed 11.3, everything is working fine. However, I just releazed that after I installed it, I used my whole partition (Not Windows 7, or I would've been in hell). My Windows 7 is in Raid 0. My second HDD is 1 TB and 11.3 is on there. So, how can I trim down let's say 100 GB and just give the rest to Windows (800gbs). I need that much because I do editing for videos, etc. So, once again, how can I trim my partition and use it for Windows 7.
View 7 Replies View Related(This is for a 100% Clean install)
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system:
-- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup
-- 1x 320GB WDD HDD (non RAID setup)
(The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources:
- [url]
- [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
I am a student studying computer science course.
Well, I am facing problem when doing lab questions.
I must use DLXLinux bundled in Bochs (bochs.sourceforge.net).
I am required to use the /usr/local directory.
In /usr directory, there is no directory named 'local' but there is one thing called 'local@'. So, when I try to use mkdir command to create 'local' directory in /usr , there are error "cannot make directory.....".
Look at my screenshot at [url].
I get the following error whenever I launch bash:
Code:
mkdir: cannot create directory `/dev/cgroup/cpu/user/5900': No such file or directory
bash: /dev/cgroup/cpu/user/5900/tasks: No such file or directory
bash: /dev/cgroup/cpu/user/5900/notify_on_release: No such file or directory
It seems like it's probably from this part of .bashrc:
[Code]...
What does this code do, why, and what's causing it to go wrong?
Is there soemthing like bootcamp which can be run by linux? Because if i can use "bootcamp" to create a windows partition . Then i would be able to use my windows recovery disc
View 10 Replies View RelatedNow however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
I got tired of dual booting on my old computer so on the new computer I am planning to run XP on VMware Player. The problem is that on the new computer neither Ubuntu or XP can "see" the FAT32 partition. I intend to use the FAT32 partition for photo images and old Windows files and need access from both Ubintu and XP.
Partition table entries are not in disk order.
When using the gparted option to create a new partition table does this automatically create a new mbr?
View 1 Replies View RelatedI need to create a directory named just like his parent.
Example:
I tried this but because there is "Space Characters" in the name of Parent directory, my script fails.
Recently I mounted a larger partition into my home directory since I was running out of space, Everything went smoothly, but it caused me to wonder about something I cant figure out. While playing with the mount unmount commands when I was copying everything over... before editing my fstab.
Is there a way to access the files that existed in a directory before you mount a partition to that directory? after mount the original files are gone.unmount and they are back, Where do they go?
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
View 2 Replies View RelatedAfter several times install & reinstall,i got a stable dual boot vista / ubuntu 10.10.,but i can't access or even see my windows partition from ubuntu,i installed my dual boot with wubu this time,in previous installation when i didn't use wubi , i didn't have such a problem & windows partition with all my files in it (windows files,media ,etc,) was easily accessible from "places" on ubuntu . I already disabled windows firewall & other security options but nothing changed
View 3 Replies View RelatedI am trying to install windows 7 on my harddive, I am running ubuntu 10.04 and have windows 7 on DVD.I was until recently also using uberstudent, which I deleted (100 gigs) to make space for windows.However once I get to the windows start up I get a message: setup cannot detect or create a partition for this partition. (not word for word).
View 1 Replies View RelatedI installed Redhat Enterprise 3 on one of my servers. In my haste I didn't properly partition both Hard Drives and only properly partitioned one of them. Thus now I have
/dev/sdb1 478711768 137858256 316536328 31% /
/dev/sda1 101089 15346 80524 17% /boot
Where /dev/sda1 is actually a 80 GB hard drive. Is there anyway I can safely and easily repartition the unpartitioned space without causing a huge mess? I have a very important Oracle database on /dev/sdb1 and thus I want to be able to back it up on the second disk. I can create a partition on that drive?